2102436-1

7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION 6 5 4 3 2 20 LOC - ALL RIGHTS RESERVED. 20 1 REVISIONS DIST - P LTR D -P- 0.470 REF DESCRIPTION DATE REV PER ECO 14-018436 DWN APVD CT 12-8-14 DH 4 FINISHED HOLE SIZE D -L- 6 12.25 REF 10.75 3 D 6 11.20 REF 1.40 9x C 8.55 17.10 3 C 1.90 10x 2102436-1, 2102436-3 REF RECOMMENDED PC BOARD LAYOUT COMPONENT SIDE SHOWN SCALE 10:1 = SIGNAL = GROUND 1 B 2 A MATERIAL: CONTACT AND SHIELD: COPPER ALLOY HOUSING AND CHICKLET: LCP, COLOR: BLACK TAPE: POLYIMIDE FILM WITH SILICONE ADHESIVE DIMENSION APPLIES TO CENTERLINE OF THRU HOLE 4 PER APPLICATION SPEC 114-13267 MANUFACTURING TOLERANCES FOR n 0.46±.06 FINISHED HOLE WITH SnPb PLATING DRILLED HOLE = n 0.55±.025 Cu PLATING = 0.038±0.013 SnPb PLATING = 0.008±0.004 OR n 0.47±.055 FINISHED HOLE WITH OUT SnPb PLATING DRILLED HOLE = n 0.55±.025 Cu PLATING = 0.038±0.013 6 SEE PRINT 2102427-1 FOR DIMENSIONS 7 FINISH: CONTACT: MATING AREA: 1.27µm MIN GOLD OVER 1.27µm MIN NICKEL COMPLIANT PIN: 0.5µm MIN BRIGHT TIN LEAD OVER 1.27µm MIN NICKEL SHIELD: 1.27µm MIN NICKEL ( 14 ) 5.60 19.00 4.25 1.90 B 16.15 ( 10.8 ) 1.60 3 GROUNDS ARE CONNECTED THROUGH GROUNDING SHIELD. NOT APPLY TO SINGLE ENDED MODULE. GROUND SHIELD UNDER KAPTON TAPE 15.53 FINISH: CONTACT: MATING AREA: 1.27µm MIN GOLD OVER 1.27µm MIN NICKEL COMPLIANT PIN: 0.5µm MIN MATTE TIN OVER 1.27µm MIN NICKEL SHIELD: 1.27µm MIN NICKEL 5 5 19.20 2.20 CONTACT A1 1.40 1.70 11.20 6.34 SINGLE ENDED 7 FINISH DIMENSIONS: mm TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES MATERIAL FINISH 0.13 0.10 - SEE TABLE DWN D. BELACK PART NUMBER 10MAR2011 CHK - APVD - K. MILLER K. THACKSTON NAME 108-2409 114-13267 ~ 12.08 CUSTOMER DRAWING SIZE g A TE Connectivity APPLICATION SPEC WEIGHT 2102436-1 DESCRIPTION PRODUCT SPEC 2° 2102436-2 DIFFERENTIAL PAIR 2 THIS DRAWING IS A CONTROLLED DOCUMENT. 2102436-3 SINGLE ENDED 2 GROUNDS DO 2102436-4 DIFFERENTIAL PAIR 7 1 4805 (3/11) ROW A Fortis Zd, METAL SHELL LRU, RIGHT ANGLE HEADER, MODULE - CAGE CODE A1 00779 DRAWING NO 2102436 SCALE 1:1 SHEET RESTRICTED TO 1 OF - 2 REV D 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY - 6 5 4 3 2 20 LOC - ALL RIGHTS RESERVED. 0.470 -P- REF 1 REVISIONS DIST - P LTR - 4 DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - FINISHED HOLE SIZE D -L- D 6 11.20 REF 10.75 3 12.25 REF 6 1.40 9x C C 1.90 8.55 17.10 3 10x 2102436-2, 2102436-4 REF 19.20 5.60 19.00 4.25 1.90 B B 15.53 16.15 1.60 2.20 1.40 CONTACT A1 ROW A 1.70 11.20 6.34 A A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES 0.13 0.10 - FINISH 1 4805 (3/11) TOLERANCES UNLESS OTHERWISE SPECIFIED: SEE TABLE DWN D. BELACK 10MAR2011 CHK - APVD - K. MILLER K. THACKSTON TE Connectivity NAME PRODUCT SPEC 108-2409 APPLICATION SPEC 2° 114-13267 WEIGHT ~- Customer Drawing SIZE g A1 Fortis Zd, METAL SHELL LRU, RIGHT ANGLE HEADER, MODULE - CAGE CODE - DRAWING NO 2102436 SCALE 10:1 SHEET 2 RESTRICTED TO OF - 2 REV D