Impact™ Backplane
Connector System
Impact Backplane Connector System
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Daughter Card Receptacle Assemblies
6 Pair Daughter Card Receptacle Assemblies
5 Pair Daughter Card Receptacle Assemblies
4 Pair Daughter Card Receptacle Assemblies
3 Pair Daughter Card Receptacle Assemblies
2 Pair Daughter Card Receptacle Assemblies
..................................8
..................................9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Mezzanine Assemblies
5 Pair Mezzanine Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Backplane Header Assemblies
6 Pair Backplane Header Assemblies
5 Pair Backplane Header Assemblies
4 Pair Backplane Header Assemblies
3 Pair Backplane Header Assemblies
2 Pair Backplane Header Assemblies
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Coplanar Header (RAM) Assemblies
2 Pair Coplanar Header (RAM) Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Orthogonal Receptacle Assemblies
6 Pair Orthogonal Receptacle Assemblies
5 Pair Orthogonal Receptacle Assemblies
4 Pair Orthogonal Receptacle Assemblies
3 Pair Orthogonal Receptacle Assemblies
Disclaimer
While TE has made every reasonable effort
to ensure the accuracy of the information in
this catalog, TE does not guarantee that it is
error-free, nor does TE make any other
representation, warranty or guarantee that
the informa-tion is accurate, correct, reliable
or current. TE reserves the right to make any
adjustments to the information contained
herein at any time without notice. TE
expressly disclaims all implied warranties
regarding the information contained herein,
including, but not limited to, any implied
warranties of merchantability or fitness for a
particular purpose. The dimensions in this
catalog are for reference purposes only and
are subject to change without notice.
Specifications are subject to change without
notice. Consult TE for the latest dimensions
and design specifications.
© Copyright 2011 Tyco Electronics
Corporation. All Rights Reserved.
MULTIGIG RT, Z-PACK, Z-PACK HM-Zd,
Z-PACK HS3, Z-PACK Slim UHD,
Z-PACK TinMan, TE Connectivity,
TE connectivity (logo) and TE (logo) are
trademarks of the TE Connectivity Ltd family
of companies.
Impact is a trademark of Molex, Inc.
Other logos, product and Company names
mentioned herein may be trademarks of their
respective owners.
Orthogonal Header Assemblies
6 Pair Orthogonal Header Assemblies
5 Pair Orthogonal Header Assemblies
4 Pair Orthogonal Header Assemblies
3 Pair Orthogonal Header Assemblies
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Global Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Visit the Impact connector webpage at: www.te.com/products/impact
2
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Introduction
Product Facts
■
Differential pair density up
to 80 pairs per linear inch
■
Broad-edge-coupled,
differential-pair system
■
PCB routing complexity and
costs are reduced by using
1.90 mm by 1.35 mm (.075"
by .053") grid on backplane
and daughter card
■
Offers flexibility and
advanced mechanical and
electrical performance with
two compliant-pin attach
options
■
Inline staggered, bifurcated
contact beams in daughter
card interface provides
improved mating
performance
Industry Applications
■
Telecommunications
equipment
■ Hubs, routers, switches
■
Central office, cellular
infrastructure and
multi-platform service
(DSL, Cable Data) systems
■
Data networking equipment
■ Servers
■ Storage
■
Test and measurement
equipment
■
Medical diagnostic
equipment
Technical Documents
Product Specification
108-2351
Application Specification
114-13258
TE Connectivity offers a
variety of backplane/
midplane solutions to meet
the demand for increased
network bandwidth and
advanced technology. Each
solution is designed for high
performance, increased
density and compatibility
with industry-standard
interfaces.
TE provides a user-friendly
transition between the PCBmounted connector and the
backplane/ midplane.
TE has extensive knowledge
and expertise on high-speed
interface design. Your
specific needs can be
customized and transformed
into new manufacturable
designs.
The Impact backplane
connector and cable system
from TE pushes the speed
and density envelope to
meet the growing demands
of next-generation telecommunication and data net-
working equipment; the
system is available in 2-6
pair configurations with a
complete range of guidance
and power-solution options
plus right-angle cable
assemblies.
Material and Finish
The Impact system is
available in two compliantpin design options on both
daughter card and backplane connectors, providing
customers ultimate flexibility
to optimize their designs for
advanced mechanical and
electrical performance. The
Impact system’s mating
interface provides in-line
staggered, bifurcated contacts that provide 2 points of
contact for the long-term
reliability performance and
built-in, ground-signal
sequencing. This reduces
the average mating force per
connector to improve the
mechanical mating
performance of the system.
Platings
Signal Contact — High Performance
Copper (Cu) Alloy
Ground Contact — High Performance
Copper (Cu) Alloy
Housing — Liquid Crystal Polymer,
UL 94V-0
Contact Area — 0.76 µm (30 µ") Gold
(Au) min.
Solder Tail Area — Tin (Sn) or
Tin/Lead (Sn/Pb)
Underplating — Nickel (Ni)
PCB Thickness — 1.60 mm (.062")
typical
Ratings
Temperature Range — -55˚C to
85˚C max.
Current Rating — 0.75 A per pin max.
Durability — 200 cycles
Operating Voltage — 30 VAC RMS/
DC max.
Mating Force — 0.30 N (9.066 lb)
max. per pin
Compliant Pin Retention Force to
PCB — 3.56 N (.80 lb) per compliant
pin average min.
Compliant Pin Insertion Force to
PCB — 26.7 N (6.0 lb) max. per contact
Signal Integrity
Insulation Resistance — 10,000
Megohms min.
Visit the Impact connector webpage at: www.te.com/products/impact
3
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Introduction (Continued)
3-6 Gb/s
Data Rate
10-15 Gb/s
15-20 Gb/s
6-10 Gb/s
20-25 Gb/s
25+ Gb/s
Impact Connector
40 DP/in
16 DP/cm
Z-PACK TinMan
100Ω and 85Ω Connectors
40 DP/in
16 DP/cm
Z-PACK Slim UHD CS
Connector
Z-PACK Slim UHD HS
Connector
36 DP/in
14 DP/cm
70 DP/in
26 DP/cm
Z-PACK HM-Zd
Plus Connector
Z-PACK HM-Zd Connector
40 DP/in
16 DP/cm
40 DP/in
16 DP/cm
MULTIGIG RT Connector
57 DP/in
23 DP/cm
Z-PACK HS3
Connector
60 DP/in
24 DP/cm
2 Pair Impact Connector
3 Pair Impact Connector
4 Pair Impact Connector
5 Pair Impact Connector
6 Pair Impact Connector
Header Width (W)
12.65 mm
16.70 mm
20.75 mm
24.8 mm
28.85 mm
Pairs/Inch
27
40
54
67
80
Receptacles
2057405-1
2007705-1
2007717-1
2110106-1
2007741-1
2 Pair
3 Pair
4 Pair
5 Pair
6 Pair
Headers
2057428-1
2007786-1
2007818-1
2007850-1
2007882-1
All the numbers provided are for 0.39mm PCB plated thru hole use. Part
numbers are available for 0.46mm PCB plated thru holes by contacting the
respective country product information center listed on the bottom of each
page.
W
6 Pair
5 Pair
4 Pair
3 Pair
2 Pair
Visit the Impact connector webpage at: www.te.com/products/impact
4
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Introduction (Continued)
Impact Connector Family
Standard, Monoblock
Solutions
2 Pair Impact (W = 12.65 mm)
Density = 27 Pairs/Inch
10 column = 20 Diff. Pairs
16 column = 32 Diff. Pairs
3 Pair Impact (W = 16.7 mm)
Density = 40 Pairs/Inch
10 column = 30 Diff. Pairs
16 column = 48 Diff. Pairs
End-to-End Stackable Example
4 Pair Impact (W = 20.75 mm)
Density = 54 Pairs/Inch
10 column = 40 Diff. Pairs
16 column = 64 Diff. Pairs
5 Pair Impact (W = 24.80 mm)
Density = 67 Pairs/Inch
10 column = 50 Diff. Pairs
16 column = 80 Diff. Pairs
6 Pair Impact (W = 28.85 mm)
Density = 80 Pairs/Inch
10 column = 60 Diff. Pairs
16 column = 96 Diff. Pairs
End Wall Separation Example
Visit the Impact connector webpage at: www.te.com/products/impact
5
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Introduction (Continued)
Worst Case Crosstalk
All NEXT
2.7%
All FeXT
0.7%
Recommended Pinout
(as shown below)
1.5%
Test Data
Vertical Header —
Right-Angle Receptacle
■ 4 pair connector module
■ 1.9 mm column pitch
■ 0.0146" plated through
holes
■
50 ps (20-80%) edge rate
■
Includes two 1.5 mm
[0.060] vias to bottom layer
traces
■
0.0
-1.0
-2.0
-3.0
Magnitude (dB)
■
Differential Insertion Loss
-4.0
-5.0
-6.0
-7.0
Asynchronous noise sum of
peaks from each aggressor,
divided by differential swing
(A-B)
-8.0
-9.0
-10.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
Frequency (GHz)
7.0
8.0
40.2
40.3
9.0
10.0
Differential Impedance
120.0
115.0
Impedance (Ohms)
110.0
105.0
100.0
95.0
90.0
85.0
80.0
39.5
39.6
39.7
39.8
39.9
40.0
Time (ns)
40.1
40.4
40.5
Visit the Impact connector webpage at: www.te.com/products/impact
6
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Introduction (Continued)
Impact High Performance
Cable Assembly Planned:
■ 3 x 16 wafer stack —96
diff. pair total
■
■
■
■
Impact wafer to wafer
pitch — 3.8 mm
Assumes 3 m length —
26 AWG raw cable
Integral guidance
Robust, stamped, metal
wafer stack stiffener
100 Ohm
Pair Size
2 Pair
3 Pair
4 Pair
5 Pair
6 Pair
Columns
10
16
8
10
16
8
10
16
10
12
16
10
14
16
Pins
60
96
72
90
144
96
120
192
150
180
240
180
252
288
Pairs
20
32
24
30
48
32
40
64
50
60
80
60
84
96
Columns
10
16
Pins
150
240
Pairs
50
80
85 Ohm
Pair Size
5 Pair
Visit the Impact connector webpage at: www.te.com/products/impact
7
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Daughter Card Receptacle Assemblies
6 Pair Daughter Card
Receptacle Assemblies
Column
10
16
Guide
Part Number
Left
Right
Unguided
Left
Right
Unguided
2007739-1
2007740-1
2007741-1
2007745-1
2007746-1
2007747-1
A
26.6
26.6
19
38
38
30.4
Dimension
B
37.3
37.3
37.3
37.3
37.3
37.3
C
17.1
17.1
17.1
28.5
28.5
28.5
Application Tooling
Mates With
2018534-1
2018534-1
2018534-1
2018535-1
2018535-1
2018535-1
2007873-1
2007877-1
2007886-1
2007889-1
2007893-1
2007902-1
Note: 10 column part number 2007739-1 is pictured below.
All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB
plated thru holes by contacting the respective country product information center listed on the bottom of each page.
B
Ref.
A
Max.
C
Key Position
Chart
None
A
E
B
F
C
G
D
H
Recommended PCB Layout
Min. Board Thickness 1.0
Visit the Impact connector webpage at: www.te.com/products/impact
8
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Daughter Card Receptacle Assemblies (Continued)
5 Pair Daughter Card
Receptacle Assemblies
Column
10
16
Guide
Part Number
Left
Right
Unguided
Left
Right
Unguided
2110104-1
2110105-1
2110106-1
2110122-1
2110123-1
2110124-1
A
26.6
26.6
19.0
38.0
38.0
30.4
Dimension
B
32.3
32.3
32.3
32.3
32.3
32.3
C
17.1
17.1
17.1
28.5
28.5
28.5
Application Tooling
Mates With
2018448-1
2018448-1
2018448-1
2018532-1
2018532-1
2018532-1
2007841-1
2007845-1
2007854-1
2007857-1
2007861-1
2007870-1
Note: 10 column part number 2110104-1 is pictured below.
All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB
plated thru holes by contacting the respective country product information center listed on the bottom of each page.
B
Ref.
A
Max.
C
Key Position
Chart
None
A
E
B
F
C
G
D
H
Recommended PCB Layout
Min. Board Thickness 1.0
Visit the Impact connector webpage at: www.te.com/products/impact
9
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Daughter Card Receptacle Assemblies (Continued)
4 Pair Daughter Card
Receptacle Assemblies
Column
10
16
Guide
Part Number
Left
Right
Unguided
Left
Right
Unguided
2007715-1
2007716-1
2007717-1
2007721-1
2007722-1
2007723-1
A
26.6
26.6
19
38
38
30.4
Dimension
B
28.2
28.2
28.2
28.2
28.2
28.2
C
17.1
17.1
17.1
28.5
28.5
28.5
Application Tooling
Mates With
2018530-1
2018530-1
2018530-1
2018531-1
2018531-1
2018531-1
2007809-1
2007813-1
2007822-1
2007825-1
2007829-1
2007838-1
Note: 10 column part number 2007715-1 is pictured below.
All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB
plated thru holes by contacting the respective country product information center listed on the bottom of each page.
B
Ref.
A
Max.
C
Key Position
Chart
None
A
E
B
F
C
G
D
H
Recommended PCB Layout
Min. Board Thickness 1.0
Visit the Impact connector webpage at: www.te.com/products/impact
10
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Daughter Card Receptacle Assemblies (Continued)
3 Pair Daughter Card
Receptacle Assemblies
Column
10
16
Guide
Part Number
Left
Right
Unguided
Left
Right
Unguided
2007703-1
2007704-1
2007705-1
2007709-1
2007710-1
2007711-1
A
26.6
26.6
19
38
38
30.4
Dimension
B
24.2
24.2
24.2
24.2
24.2
24.2
C
17.1
17.1
17.1
28.5
28.5
28.5
Application Tooling
Mates With
2018380-1
2018380-1
2018380-1
2018381-1
2018381-1
2018381-1
2007777-1
2007781-1
2007789-1
2007793-1
2007797-1
2007805-1
Note: 10 column part number 2007703-1 is pictured below.
All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB
plated thru holes by contacting the respective country product information center listed on the bottom of each page.
B
Ref.
A
Max.
C
Key Position
Chart
None
A
E
B
F
C
G
D
H
Recommended PCB Layout
Min. Board Thickness 1.0
Visit the Impact connector webpage at: www.te.com/products/impact
11
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Daughter Card Receptacle Assemblies (Continued)
2 Pair Daughter Card
Receptacle Assemblies
Column
10
16
Guide
Part Number
Left
Right
Unguided
Left
Right
Unguided
2057403-1
2057404-1
2057405-1
2057409-1
2057410-1
2057411-1
A
26.6
26.6
19
38
38
30.4
Dimension
B
20.1
20.1
20.1
20.1
20.1
20.1
C
17.1
17.1
17.1
28.5
28.5
28.5
Application Tooling
Mates With
2018538-1
2018538-1
2018538-1
2018539-1
2018539-1
2018539-1
2057419-1
2057423-1
2057432-1
2057737-1
2057741-1
2057750-1
Note: 16 column part number 2057410-1 is pictured below.
All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB
plated thru holes by contacting the respective country product information center listed on the bottom of each page.
B
Ref.
A
Max.
C
Recommended PCB Layout
Min. Board Thickness 1.6
Visit the Impact connector webpage at: www.te.com/products/impact
12
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Mezzanine Assemblies
5 Pair Mezzanine
Receptacle Assemblies
Column
Stack
Height
10
40 mm
16
28 mm
Guide
Part Number
Left
Right
Unguided
Left
Right
Unguided
2149911-1
2149912-1
2149913-1
2149392-1
2149393-1
2149394-1
A
26.6
26.6
19.0
26.6
26.6
19.0
Dimension
B
24.2
24.2
24.2
24.2
24.2
24.2
C
17.1
17.1
17.1
28.5
28.5
28.5
Application
Tooling
Mates With
2018774-1
2018774-1
2018774-1
2018774-2
2018774-2
2018774-2
2007840-1
2007844-1
2007850-1
2007856-1
2007860-1
2007866-1
Note: 10 column part number 2149913-1 is pictured below.
All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB
plated thru holes by contacting the respective country product information center listed on the bottom of each page.
C
Recommended PCB Layout
Min. Board Thickness 1.0
A
Max.
B
Visit the Impact connector webpage at: www.te.com/products/impact
13
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Backplane Header Assemblies
6 Pair Backplane Header
Assemblies
Column
Guide
Left
Right
10
Unguided
Left
Right
16
Unguided
Wall End
Part Number
Right
Open
Left
Open
Left
Right
Dual
Open
Right
Open
Left
Open
Left
Right
Dual
Open
2007875-1
2007873-1
2007879-1
2007877-1
2007885-1
2007887-1
2007886-1
2007884-1
2007891-1
2007889-1
2007895-1
2007893-1
2007901-1
2007903-1
2007902-1
2007900-1
A
26.9
25.5
26.9
25.5
20.3
20.3
21.7
18.9
38.3
36.9
38.3
36.9
31.7
31.7
33.1
30.3
Dimension
B
28.9
28.9
28.9
28.9
28.9
28.9
28.9
28.9
28.9
28.9
28.9
28.9
28.9
28.9
28.9
28.9
C
17.1
17.1
17.1
17.1
17.1
17.1
17.1
17.1
28.5
28.5
28.5
28.5
28.5
28.5
28.5
28.5
Application
Tooling
Mates With
2018527-1
2018527-1
2018527-1
2018527-1
2018527-1
2018527-1
2018527-1
2018527-1
2018528-1
2018528-1
2018528-1
2018528-1
2018528-1
2018528-1
2018528-1
2018528-1
2007739-1
2007739-1
2007740-1
2007740-1
2007741-1
2007741-1
2007741-1
2007741-1
2007745-1
2007745-1
2007746-1
2007746-1
2007747-1
2007747-1
2007747-1
2007747-1
Note: 10 column part number 2007877-1 is pictured below.
All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB
plated thru holes by contacting the respective country product information center listed on the bottom of each page.
C
A
Z
B
Right Guided
Backplane Hole Pattern
(Connector Side)
Z
Key Position
Chart
None
A
E
B
F
C
G
D
H
Section Z-Z
Visit the Impact connector webpage at: www.te.com/products/impact
14
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Backplane Header Assemblies (Continued)
5 Pair Backplane Header
Assemblies
Column
Guide
Left
Right
10
Unguided
Left
Right
16
Unguided
Wall End
Part Number
Right
Open
Left
Open
Left
Right
Dual
Open
Right
Open
Left
Open
Left
Right
Dual
Open
2007843-1
2007841-1
2007847-1
2007845-1
2007853-1
2007855-1
2007854-1
2007852-1
2007853-1
2007857-1
2007863-1
2007861-1
2007869-1
2007871-1
2007870-1
2007868-1
A
26.9
25.5
26.9
25.5
20.3
20.3
21.7
18.9
38.3
36.9
38.3
36.9
31.7
31.7
33.1
30.3
Dimension
B
24.8
24.8
24.8
24.8
24.8
24.8
24.8
24.8
24.8
24.8
24.8
24.8
24.8
24.8
24.8
24.8
C
17.1
17.1
17.1
17.1
17.1
17.1
17.1
17.1
28.5
28.5
28.5
28.5
28.5
28.5
28.5
28.5
Application
Tooling
Mates With
2018446-1
2018446-1
2018446-1
2018446-1
2018446-1
2018446-1
2018446-1
2018446-1
2018525-1
2018525-1
2018525-1
2018525-1
2018525-1
2018525-1
2018525-1
2018525-1
2110104-1
2110104-1
2110105-1
2110105-1
2110106-1
2110106-1
2110106-1
2110106-1
2110122-1
2110122-1
2110123-1
2110123-1
2110124-1
2110124-1
2110124-1
2110124-1
Note: 10 column part number 2007841-1 is pictured below.
All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB
plated thru holes by contacting the respective country product information center listed on the bottom of each page.
C
A
Z
B
Left Guided
Backplane Hole Pattern
(Connector Side)
Z
Key Position
Chart
A
None
D E F
A
A
D E F
A
A
D E F
B
D E F
F
A
C
A
D E F
E
A
A
D E F
D E F
D E F
G
A
D
D E F
H
Section Z-Z
Visit the Impact connector webpage at: www.te.com/products/impact
15
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Backplane Header Assemblies (Continued)
4 Pair Backplane Header
Assemblies
Column
Guide
Left
Right
10
Unguided
Left
Right
16
Unguided
Wall End
Part Number
Right
Open
Left
Open
Left
Right
Dual
Open
Right
Open
Left
Open
Left
Right
Dual
Open
2007811-1
2007809-1
2007815-1
2007813-1
2007821-1
2007823-1
2007822-1
2007820-1
2007827-1
2007825-1
2007831-1
2007829-1
2007837-1
2007839-1
2007838-1
2007836-1
A
26.9
25.5
26.9
25.5
20.3
20.3
21.7
18.9
38.3
36.9
38.3
36.9
31.7
31.7
33.1
30.3
Dimension
B
20.8
20.8
20.8
20.8
20.8
20.8
20.8
20.8
20.8
20.8
20.8
20.8
20.8
20.8
20.8
20.8
C
17.1
17.1
17.1
17.1
17.1
17.1
17.1
17.1
28.5
28.5
28.5
28.5
28.5
28.5
28.5
28.5
Application
Tooling
Mates With
2018524-1
2018524-1
2018524-1
2018524-1
2018524-1
2018524-1
2018524-1
2018524-1
2018513-1
2018513-1
2018513-1
2018513-1
2018513-1
2018513-1
2018513-1
2018513-1
2007715-1
2007715-1
2007716-1
2007716-1
2007717-1
2007717-1
2007717-1
2007717-1
2007721-1
2007721-1
2007722-1
2007722-1
2007723-1
2007723-1
2007723-1
2007723-1
Note: 10 column part number 2007811-1 is pictured below.
All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB
plated thru holes by contacting the respective country product information center listed on the bottom of each page.
C
A
Z
B
Z
Left Guided
Backplane Hole Pattern
(Connector Side)
Key Position
Chart
None
A
E
B
F
C
G
D
H
Section Z-Z
Visit the Impact connector webpage at: www.te.com/products/impact
16
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Backplane Header Assemblies (Continued)
3 Pair Backplane Header
Assemblies
Column
Guide
Wall End
Part Number
Right
Open
Left
Open
Left
Right
Dual
Open
Right
Open
Left
Open
Left
Right
Dual
Open
2007779-1
2007777-1
2007783-1
2007781-1
2007789-1
2007791-1
2007790-1
2007788-1
2007795-1
2007793-1
2007799-1
2007797-1
2007805-1
2007807-1
2007806-1
2007804-1
Left
Right
10
Unguided
Left
Right
16
Unguided
A
26.9
25.5
26.9
25.5
20.3
20.3
21.7
18.9
38.3
36.9
38.3
36.9
31.7
31.7
33.1
30.3
Dimension
B
16.7
16.7
16.7
16.7
16.7
16.7
16.7
16.7
16.7
16.7
16.7
16.7
16.7
16.7
16.7
16.7
C
17.1
17.1
17.1
17.1
17.1
17.1
17.1
17.1
28.5
28.5
28.5
28.5
28.5
28.5
28.5
28.5
Application
Tooling
Mates With
2018377-1
2018377-1
2018377-1
2018377-1
2018377-1
2018377-1
2018377-1
2018377-1
2018378-1
2018378-1
2018378-1
2018378-1
2018378-1
2018378-1
2018378-1
2018378-1
2007703-1
2007703-1
2007704-1
2007704-1
2007705-1
2007705-1
2007705-1
2007705-1
2007709-1
2007709-1
2007710-1
2007710-1
2007711-1
2007711-1
2007711-1
2007711-1
Note: 10 column part number 2007791-1 is pictured below.
All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB
plated thru holes by contacting the respective country product information center listed on the bottom of each page.
C
A
Z
B
Z
Unguided
Backplane Hole Pattern
(Connector Side)
Section Z-Z
Visit the Impact connector webpage at: www.te.com/products/impact
17
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Backplane Header Assemblies (Continued)
2 Pair Backplane Header
Assemblies
Column
Guide
Left
Right
10
Unguided
Left
Right
16
Unguided
Wall End
Part Number
Right
Open
Left
Open
Left
Right
Dual
Open
Right
Open
Left
Open
Left
Right
Dual
Open
2057421-1
2057419-1
2057425-1
2057423-1
2057431-1
2057433-1
2057432-1
2057430-1
2057739-1
2057737-1
2057743-1
2057741-1
2057749-1
2057751-1
2057750-1
2057748-1
A
26.9
25.5
25.5
26.9
20.3
20.3
21.7
18.9
38.3
36.9
38.3
36.9
31.7
31.7
33.1
30.3
Dimension
B
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
C
17.1
17.1
17.1
17.1
17.1
17.1
17.1
17.1
28.5
28.5
28.5
28.5
28.5
28.5
28.5
28.5
Application
Tooling
Mates With
2018536-1
2018536-1
2018536-1
2018536-1
2018536-1
2018536-1
2018536-1
2018536-1
2018537-1
2018537-1
2018537-1
2018537-1
2018537-1
2018537-1
2018537-1
2018537-1
2057403-1
2057403-1
2057404-1
2057404-1
2057405-1
2057405-1
2057405-1
2057405-1
2057409-1
2057409-1
2057410-1
2057410-1
2057411-1
2057411-1
2057411-1
2057411-1
Note: 10 column part number 2057419-1 is pictured below.
All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB
plated thru holes by contacting the respective country product information center listed on the bottom of each page.
C
A
Z
B
Z
Left Guided
Backplane Hole Pattern
(Connector Side)
Section Z-Z
Visit the Impact connector webpage at: www.te.com/products/impact
18
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Coplanar Header (RAM) Assemblies (Continued)
2 Pair Coplanar Header
(RAM) Assemblies
Column
Guide
Left
Right
10
Unguided
Left
Right
16
Unguided
Wall End
Part Number
Right
Open
Left
Open
Left
Right
Dual
Open
Right
Open
Left
Open
Left
Right
Dual
Open
2143017-2
2143016-2
2143019-2
2143018-2
2143013-2
2143015-2
2143014-2
2143012-2
2143314-2
2143313-2
2143316-2
2143315-2
2143310-2
2143312-2
2143311-2
2143309-2
A
28
26.6
28
26.6
20.4
20.4
21.8
19
39.4
38
39.4
38
31.8
31.8
33.2
30.4
Dimension
B
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
C
17.1
17.1
17.1
17.1
17.1
17.1
17.1
17.1
28.5
28.5
28.5
28.5
28.5
28.5
28.5
28.5
Application
Tooling
Mates With
2018779-1
2018779-1
2018779-1
2018779-1
2018779-1
2018779-1
2018779-1
2018779-1
2018779-2
2018779-2
2018779-2
2018779-2
2018779-2
2018779-2
2018779-2
2018779-2
2057404-1
2057404-1
2057403-1
2057403-1
2057405-1
2057405-1
2057405-1
2057405-1
2057410-1
2057410-1
2057409-1
2057409-1
2057411-1
2057411-1
2057411-1
2057411-1
Note: 16 column part number 2143309-1 is pictured below.
A
Max.
C
B
Recommended PCB Layout
Coplanar Mated Signal Paths
Visit the Impact connector webpage at:
www.te.com/products/Impact
Left Guided Right Angle Male Mates To
Right Guided Right Angle Receptacle
19
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Orthogonal Receptacle Assemblies
6 Pair Orthogonal
Receptacle Assemblies
Column
10
12
Guide
Part Number
Left
Right
Unguided
Left
Right
Unguided
2132718-1
2132719-1
2132720-1
2132721-1
2132722-1
2132723-1
A
28.35
28.35
20.25
32.4
32.4
24.3
Dimension
B
37.3
37.3
37.3
37.3
37.3
37.3
C
18.1
18.1
18.1
22.15
22.15
22.15
Application Tooling
Mates With
2018773-1
2018773-1
2018773-1
2018773-2
2018773-2
2018773-2
2143249-1
2143251-1
2143255-1
2143265-1
2143267-1
2143271-1
Note: 12 column part number 2132723-1 is pictured below.
All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB
plated thru holes by contacting the respective country product information center listed on the bottom of each page.
B
Ref.
A
Max.
C
Recommended PCB Layout
Min. Board Thickness 1.0
Visit the Impact connector webpage at: www.te.com/products/impact
20
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Orthogonal Receptacle Assemblies (Continued)
5 Pair Orthogonal
Receptacle Assemblies
Column
8
10
12
Guide
Part Number
Left
Right
Unguided
Left
Right
Unguided
Left
Right
Unguided
2132690-1
2132691-1
2132692-1
2132693-1
2132694-1
2132695-1
2132696-1
2132697-1
2132698-1
A
24.3
24.3
16.2
28.35
28.35
20.25
32.4
32.4
24.3
Dimension
B
32.3
32.3
32.3
32.3
32.3
32.3
32.3
32.3
32.3
C
14.05
14.05
14.05
18.1
18.1
18.1
22.15
22.15
22.15
Application Tooling
Mates With
2018772-1
2018772-1
2018772-1
2018772-2
2018772-2
2018772-2
2018772-3
2018772-3
2018772-3
2143545-1
2143547-1
2143550-1
2143557-1
2143559-1
2143562-1
2143569-1
2143571-1
2143574-1
Note: 10 column part number 2132693-1 is pictured below.
All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB
plated thru holes by contacting the respective country product information center listed on the bottom of each page.
B
A
Max.
C
Recommended PCB Layout
Visit the Impact connector webpage at: www.te.com/products/impact
21
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Orthogonal Receptacle Assemblies (Continued)
4 Pair Orthogonal
Receptacle Assemblies
Column
6
8
10
Guide
Part Number
Left
Right
Unguided
Left
Right
Unguided
Left
Right
Unguided
2132461-1
2132462-1
2132463-1
2132464-1
2132465-1
2132466-1
2132467-1
2132468-1
2132469-1
A
20.25
20.25
12.15
24.3
24.3
16.2
28.35
28.35
20.25
Dimension
B
28.2
28.2
28.2
28.2
28.2
28.2
28.2
28.2
28.2
C
10
10
10
14.05
14.05
14.05
18.1
18.1
18.1
Application Tooling
Mates With
2018771-1
2018771-1
2018771-1
2018771-2
2018771-2
2018771-2
2018771-3
2018771-3
2018771-3
2132593-1
2132595-1
2132599-1
2132609-1
2132611-1
2132615-1
2132597-1
2132599-1
2132631-1
Note: 8 column part number 2132464-1 is pictured below.
All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB
plated thru holes by contacting the respective country product information center listed on the bottom of each page.
B
Ref.
A
Max.
C
Recommended PCB Layout
Min. Board Thickness 1.0
Visit the Impact connector webpage at: www.te.com/products/impact
22
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Orthogonal Receptacle Assemblies (Continued)
3 Pair Orthogonal
Receptacle Assemblies
Column
6
8
Guide
Part Number
Left
Right
Unguided
Left
Right
Unguided
2132422-1
2132423-1
2132424-1
2132425-1
2132426-1
2132427-1
A
20.25
20.25
12.15
24.3
24.3
16.2
Dimension
B
C
24.1
10
24.1
10
24.1
10
24.1
14.05
24.1
14.05
24.1
14.05
Application Tooling
Mates With
2018770-1
2018770-1
2018770-1
2018770-2
2018770-2
2018770-2
2132561-1
2132563-1
2132567-1
2132577-1
2132579-1
2132583-1
Note: 6 column part number 2132424-1 is pictured below.
All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB
plated thru holes by contacting the respective country product information center listed on the bottom of each page.
B
A
Max.
C
Recommended PCB Layout
Visit the Impact connector webpage at: www.te.com/products/impact
23
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Orthogonal Header Assemblies
6 Pair Orthogonal Header
Assemblies
Column
Guide
Left
Right
10
Unguided
Left
Right
12
Unguided
All the numbers provided are for
0.39mm PCB plated thru hole use.
Part numbers are available for
0.46mm PCB plated thru holes by
contacting the respective country
product information center listed on
the bottom of each page.
Wall End
Part Number
Right
Open
Left
Open
Left
Right
Dual
Open
Right
Open
Left
Open
Left
Right
Dual
Open
2143250-1
2143249-1
2143252-1
2143251-1
2143254-1
2143256-1
2143255-1
2143253-1
2143266-1
2143265-1
2143268-1
2143267-1
2143270-1
2143272-1
2143271-1
2143269-1
A
28.4
27
28.4
27
21.5
21.5
22.9
20.1
32.4
31
32.4
31
25.55
25.55
26.95
24.15
Dimension
B
C
28.9
18.5
28.9
18.5
28.9
18.5
28.9
18.5
28.9
18.5
28.9
18.5
28.9
18.5
28.9
18.5
28.9
22.55
28.9
22.55
28.9
22.55
28.9
22.55
28.9
22.55
28.9
22.55
28.9
22.55
28.9
22.55
Application
Tooling
Mates With
2018773-1
2018773-1
2018773-1
2018773-1
2018773-1
2018773-1
2018773-1
2018773-1
2018773-2
2018773-2
2018773-2
2018773-2
2018773-2
2018773-2
2018773-2
2018773-2
2132718-1
2132718-1
2132719-1
2132719-1
2132720-1
2132720-1
2132720-1
2132720-1
2132721-1
2132721-1
2132722-1
2132722-1
2132723-1
2132723-1
2132723-1
2132723-1
Note: 12 column part number 2143266-1 is pictured below.
C
A
Z
B
Z
Left Guided
Backplane Hole Pattern
(Connector Side)
Section Z-Z
Visit the Impact connector webpage at: www.te.com/products/impact
24
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Orthogonal Header Assemblies (Continued)
5 Pair Orthogonal Header
Assemblies
Column
Guide
Left
Right
8
Unguided
Left
Right
10
Unguided
Note: 10 column part number
2143558-1 is pictured below.
All the numbers provided are for
0.39mm PCB plated thru hole use.
Part numbers are available for
0.46mm PCB plated thru holes by
contacting the respective country
product information center listed on
the bottom of each page.
Left
Right
12
Unguided
Wall End
Part Number
Right
Open
Left
Open
Left
Right
Dual
Open
Right
Open
Left
Open
Left
Right
Dual
Open
Right
Open
Left
Open
Left
Right
Dual
Open
2143546-1
2143545-1
2143548-1
2143547-1
2143621-1
2143622-1
2143550-1
2143549-1
2143558-1
2143557-1
2143560-1
2143559-1
2143625-1
2143626-1
2143562-1
2143561-1
2143570-1
2143569-1
2143572-1
2143571-1
2143629-1
2143630-1
2143574-1
2143573-1
A
24.3
22.9
24.3
22.9
17.45
17.45
18.85
16.05
28.4
27
28.4
27
21.5
21.5
22.9
20.1
32.4
31
32.4
31
25.55
25.55
26.95
24.15
Dimension
B
C
24.8
14.45
24.8
14.45
24.8
14.45
24.8
14.45
24.8
14.45
24.8
14.45
24.8
14.45
24.8
14.45
24.8
18.5
24.8
18.5
24.8
18.5
24.8
18.5
24.8
18.5
24.8
18.5
24.8
18.5
24.8
18.5
24.8
22.55
24.8
22.55
24.8
22.55
24.8
22.55
24.8
22.55
24.8
22.55
24.8
22.55
24.8
22.55
Application
Tooling
Mates With
2018772-1
2018772-1
2018772-1
2018772-1
2018772-1
2018772-1
2018772-1
2018772-1
2018772-2
2018772-2
2018772-2
2018772-2
2018772-2
2018772-2
2018772-2
2018772-2
2018772-3
2018772-3
2018772-3
2018772-3
2018772-3
2018772-3
2018772-3
2018772-3
2132690-1
2132690-1
2132691-1
2132691-1
2132692-1
2132692-1
2132692-1
2132692-1
2132693-1
2132693-1
2132694-1
2132694-1
2132695-1
2132695-1
2132695-1
2132695-1
2132696-1
2132696-1
2132697-1
2132697-1
2132698-1
2132698-1
2132698-1
2132698-1
C
Visit the Impact connector webpage at:
www.te.com/products/Impact
A
Z
B
Left Guided Backplane Hole Pattern
(Connector Side)
Z
Section Z-Z
25
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Orthogonal Header Assemblies (Continued)
4 Pair Orthogonal Header
Assemblies
Column
Guide
Left
Right
6
Unguided
Left
Right
8
Unguided
Note: 8 column part number
2132610-1 is pictured below.
All the numbers provided are for
0.39mm PCB plated thru hole use.
Part numbers are available for
0.46mm PCB plated thru holes by
contacting the respective country
product information center listed on
the bottom of each page.
Left
Right
10
Unguided
Wall End
Part Number
Right
Open
Left
Open
Left
Right
Dual
Open
Right
Open
Left
Open
Left
Right
Dual
Open
Right
Open
Left
Open
Left
Right
Dual
Open
2132594-1
2132593-1
2132596-1
2132595-1
2132598-1
2132600-1
2132599-1
2132597-1
2132610-1
2132609-1
2132612-1
2132611-1
2132614-1
2132616-1
2132615-1
2132613-1
2132626-1
2132625-1
2132628-1
2132627-1
2132630-1
2132632-1
2132631-1
2132629-1
A
20.3
18.9
20.3
18.9
13.4
13.4
14.8
12
24.3
22.9
24.3
22.9
17.45
17.45
18.85
16.05
28.4
27
28.4
27
21.5
21.5
22.9
20.1
Dimension
B
C
20.8
10.4
20.8
10.4
20.8
10.4
20.8
10.4
20.8
10.4
20.8
10.4
20.8
10.4
20.8
10.4
20.8
14.45
20.8
14.45
20.8
14.45
20.8
14.45
20.8
14.45
20.8
14.45
20.8
14.45
20.8
14.45
20.8
18.5
20.8
18.5
20.8
18.5
20.8
18.5
20.8
18.5
20.8
18.5
20.8
18.5
20.8
18.5
Application
Tooling
Mates With
2018771-1
2018771-1
2018771-1
2018771-1
2018771-1
2018771-1
2018771-1
2018771-1
2018771-2
2018771-2
2018771-2
2018771-2
2018771-2
2018771-2
2018771-2
2018771-2
2018771-3
2018771-3
2018771-3
2018771-3
2018771-3
2018771-3
2018771-3
2018771-3
2132461-1
2132461-1
2132462-1
2132462-1
2132463-1
2132463-1
2132463-1
2132463-1
2132464-1
2132464-1
2132465-1
2132465-1
2132466-1
2132466-1
2132466-1
2132466-1
2132467-1
2132467-1
2132468-1
2132468-1
2132469-1
2132469-1
2132469-1
2132469-1
C
A
Z
B
Z
Left Guided
Backplane Hole Pattern
(Connector Side)
Section Z-Z
Visit the Impact connector webpage at: www.te.com/products/impact
26
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Orthogonal Header Assemblies (Continued)
3 Pair Orthogonal Header
Assemblies
Column
Guide
Left
Right
6
Unguided
Left
Right
8
Unguided
Wall End
Part Number
Right
Open
Left
Open
Left
Right
Dual
Open
Right
Open
Left
Open
Left
Right
Dual
Open
2132562-1
2132561-1
2132564-1
2132563-1
2132566-1
2132568-1
2132567-1
2132565-1
2132578-1
2132577-1
2132580-1
2132579-1
2132582-1
2132584-1
2132583-1
2132581-1
A
20.3
18.9
20.3
18.9
13.4
13.4
14.8
12
24.3
22.9
24.3
22.9
17.45
17.45
18.85
16.05
Dimension
B
C
16.7
10.4
16.7
10.4
16.7
10.4
16.7
10.4
16.7
10.4
16.7
10.4
16.7
10.4
16.7
10.4
16.7
14.45
16.7
14.45
16.7
14.45
16.7
14.45
16.7
14.45
16.7
14.45
16.7
14.45
16.7
14.45
Application
Tooling
Mates With
2018770-1
2018770-1
2018770-1
2018770-1
2018770-1
2018770-1
2018770-1
2018770-1
2018770-2
2018770-2
2018770-2
2018770-2
2018770-2
2018770-2
2018770-2
2018770-2
2132422-1
2132422-1
2132423-1
2132423-1
2132424-1
2132424-1
2132424-1
2132424-1
2132425-1
2132425-1
2132426-1
2132426-1
2132427-1
2132427-1
2132427-1
2132427-1
Note: 8 column part number 2132580-1 is pictured below.
All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB
plated thru holes by contacting the respective country product information center listed on the bottom of each page.
C
A
Z
B
Z
Left Guided
Backplane Hole Pattern
(Connector Side)
Section Z-Z
Visit the Impact connector webpage at: www.te.com/products/impact
27
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Part Number Index
Note: This index lists all cataloged parts
by base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
Part No.
2007703
2007704
2007705
2007709
2007710
2007711
2007715
2007716
2007717
2007721
2007722
2007723
2007739
2007740
2007741
2007745
2007746
2007747
2007777
2007779
2007781
2007783
2007786
2007788
2007789
2007790
2007791
2007793
2007795
2007797
2007799
2007804
2007805
2007806
2007807
2007809
2007811
2007813
2007815
2007818
2007820
2007821
2007822
2007823
2007825
2007827
2007829
2007831
2007836
2007837
2007838
2007839
2007840
2007841
2007843
2007844
2007845
2007847
2007850
2007852
2007853
2007854
Page
11, 17
11, 17
4, 11, 17
11, 17
11, 17
11, 17
10, 16
10, 16
4, 10, 16
10, 16
10, 16
10, 16
8, 14
8, 14
4, 8, 14
8, 14
8, 14
8, 14
11, 17
17
11, 17
17
4
17
11, 17
17
17
11, 17
17
11, 17
17
17
11, 17
17
17
10, 16
16
10, 16
16
4
16
16
10, 16
16
10, 16
16
10, 16
16
16
16
10, 16
16
13
9, 15
15
13
9, 15
15
4, 13
15
15
9, 15
Part No.
2007855
2007856
2007857
2007860
2007861
2007863
2007866
2007868
2007869
2007870
2007871
2007873
2007875
2007877
2007879
2007882
2007884
2007885
2007886
2007887
2007889
2007891
2007893
2007895
2007900
2007901
2007902
2007903
2057403
2057404
2057405
2057409
2057410
2057411
2057419
2057421
2057423
2057425
2057428
2057430
2057431
2057432
2057433
2057737
2057739
2057741
2057743
2057748
2057749
2057750
2057751
2110104
2110105
2110106
2110122
2110123
2110124
2132422
2132423
2132424
2132425
2132426
Page
15
13
9, 15
13
9, 15
15
13
15
15
9, 15
15
8, 14
14
8, 14
14
4
14
14
8, 14
14
8, 14
14
8, 14
14
14
14
8, 14
14
12, 18, 19
12, 18, 19
4, 12, 18, 19
12, 18, 19
12, 18, 19
12, 18, 19
12, 18
18
12, 18
18
4
18
18
12, 18
18
12, 18
18
12, 18
18
18
18
12, 18
18
9, 15
9, 15
4, 9, 15
9, 15
9, 15
9, 15
23, 27
23, 27
23, 27
23, 27
23, 27
Part No.
2132427
2132461
2132462
2132463
2132464
2132465
2132466
2132467
2132468
2132469
2132561
2132562
2132563
2132564
2132565
2132566
2132567
2132568
2132577
2132578
2132579
2132580
2132581
2132582
2132583
2132584
2132593
2132594
2132595
2132596
2132597
2132598
2132599
2132600
2132609
2132610
2132611
2132612
2132613
2132614
2132615
2132616
2132625
2132626
2132627
2132628
2132629
2132630
2132631
2132632
2132690
2132691
2132692
2132693
2132694
2132695
2132696
2132697
2132698
2132718
2132719
2132720
Page
23, 27
22, 26
22, 26
22, 26
22, 26
22, 26
22, 26
22, 26
22, 26
22, 26
23, 27
27
23, 27
27
27
27
23, 27
27
23, 27
27
23, 27
27
27
27
23, 27
27
22, 26
26
22, 26
26
22, 26
26
22, 26
26
22, 26
26
22, 26
26
26
26
22, 26
26
26
26
26
26
26
26
22, 26
26
21, 25
21, 25
21, 25
21, 25
21, 25
21, 25
21, 25
21, 25
21, 25
20, 24
20, 24
20, 24
28
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Impact Backplane Connector System
Part Number Index (Continued)
Part No.
2132721
2132722
2132723
2143012
2143013
2143014
2143015
2143016
2143017
2143018
2143019
2143249
2143250
2143251
2143252
2143253
2143254
2143255
2143256
2143265
2143266
2143267
Page
20, 24
20, 24
20, 24
19
19
19
19
19
19
19
19
20, 24
24
20, 24
24
24
24
20, 24
24
20, 24
24
20, 24
Part No.
2143268
2143269
2143270
2143271
2143272
2143309
2143310
2143311
2143312
2143313
2143314
2143315
2143316
2143545
2143546
2143547
2143548
2143549
2143550
2143557
2143558
2143559
Page
24
24
24
20, 24
24
19
19
19
19
19
19
19
19
21, 25
25
21, 25
25
25
21, 25
21, 25
25
21, 25
Part No.
2143560
2143561
2143562
2143569
2143570
2143571
2143572
2143573
2143574
2143621
2143622
2143625
2143626
2143629
2143630
2149392
2149393
2149394
2149911
2149912
2149913
Page
25
25
21, 25
21, 25
25
21, 25
25
25
21, 25
25
25
25
25
25
25
13
13
13
13
13
13
Part No.
2018527
2018528
2018530
2018531
2018532
2018534
2018535
2018536
2018537
Page
14
14
10
10
9
8
8
18
18
Part No.
2018538
2018539
2018770
2018771
2018772
2018773
2018774
2018779
Page
12
12
23, 27
22, 26
21, 25
20, 24
13
19
Tooling Part Number Index
Part No.
2018377
2018378
2018380
2018381
2018446
2018448
2018513
2018524
2018525
Page
17
17
11
11
15
9
16
16
15
29
Catalog 7-1773458-1
Revised 8-19
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
te.com
© 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
7-1773458-1 LUG PDF 04/2011 updated 08/2019
TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Other logos, product and/or
company names might be trademarks of their respective owners.
工商网监
湘ICP备2023018690号
