CODE 30 - HEAT SHRINK BOOT BACKSHELL
211M914-19C-D
SERIES
SHELL SIZE (TABLE 1)
MATERIAL
REFER TO CH00-0250-004
FINISH
REFER TO CH00-0250-004
MODIFICATION CODE
REFER TO CH00-0250-004 2
NOTES:
1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED
BOOT TO A CONNECTOR.
2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS,
SEE CH00-0250-004.
3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE
IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-211M914-19C).
4. KNURL INSIDE BOOT GROOVE MAY BE SUPPLIED AT MANUFACTURER'S OPTION.
5. BACKSHELL MATES TO MIL-C-28840, CLASS A, B, C, & E: M28840/10, /11, /14 & /16 CONNECTORS.
If this document is printed it becomes uncontrolled. Check for the latest revision
DATE
DRAWN K.WINCZURA
07/05/2015
CHECKED
07/05/2015
APPROVED K.SHEPPARD
08/05/2015
APPROVED
H.SMITH
24/06/2015
REVISIONS
LTR
DESCRIPTION
F
REVISED PER ECN AD93049
G
REVISED PER ECO-15-009385
3RD ANGLE
PROJECTION
NOT TO
SCALE
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
ANGULAR +/- 1°
DATE
APPROVED
24/06/2015
H.SMITH
TE CAGE CODE: 06090
POLAMCO/TE CAGE CODE: U5792
TITLE:
HEAT SHRINK BOOT BACKSHELL
ASSY USED ON:
MIL-C-28840, CLASS A, B. C, & E: M28840/10, /11, /14 & /16
CONNECTORS
TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING
AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD
INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION.
DRAWING NO:
DRAWING REV:
SHT
211M9XX
G
1
30,00
10,50
ØD
XXXX
ØG
A THREAD
ØC
E
3,50
4
PART MARK
HERE
MEDIUM DIAMOND
KNURL
4 DRAIN HOLES
WHEN 'D' MODIFICATION
IS SPECIFIED
TABLE 1
BASE PART
NUMBER
211M912
211M914
211M916
211M918
211M922
211M924
211M928
211M932
SHELL SIZE
COM'L / MIL
13 / B
15 / C
17 / D
19 / E
23 / F
25 / G
29 / H
33 / J
A
THREAD
7/8 - 20UNEF
1 - 20UNEF
1 1/8 - 18 UNEF
1 1/4 - 18UNEF
1 7/16 -18UNEF
1 9/16 -18UNEF
1 7/8 - 16UN
2 1/16 -16UN
ØC
MAX
29,7
31,3
35,5
38,7
43,6
47,2
55,2
60,5
ØD
MAX
18,9
22,0
24,1
28,0
34,5
36,8
42,9
47,9
E
+0,20/-0,00
1,12
1,12
1,12
1,75
1,75
1,75
1,75
2,20
ØG
MIN
13,8
16,9
19,0
22,4
28,4
30,7
36,8
41,7
If this document is printed it becomes uncontrolled. Check for the latest revision
DATE
DRAWN K.WINCZURA
07/05/2015
CHECKED
07/05/2015
APPROVED K.SHEPPARD
08/05/2015
APPROVED
H.SMITH
24/06/2015
REVISIONS
LTR
DESCRIPTION
F
REVISED PER ECN AD93049
G
REVISED PER ECO-15-009385
3RD ANGLE
PROJECTION
NOT TO
SCALE
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
ANGULAR +/- 1°
DATE
APPROVED
24/06/2015
H.SMITH
TE CAGE CODE: 06090
POLAMCO/TE CAGE CODE: U5792
TITLE:
HEAT SHRINK BOOT BACKSHELL
ASSY USED ON:
MIL-C-28840, CLASS A, B. C, & E: M28840/10, /11, /14 & /16
CONNECTORS
TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING
AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD
INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION.
DRAWING NO:
DRAWING REV:
SHT
211M9XX
G
2
