2149027-1

MINI-SAS HIGH DENSITY Connectors & Cable Assemblies TE Connectivity’s (TE’s) Mini-SAS HD (high density) product family includes compact, high-speed I/O solutions for SAS applications: storage, rack-mount servers, workstations, storage racks, high performance computing, HBAs (host bus adapters), RAID (redundant arrays of inexpensive disks), switches and more. The product family supports speeds up to 12 Gb/s and includes the following interfaces: • Internal receptacles and copper cable assemblies • External receptacles and copper cable assemblies The interfaces are adopted for the SAS-2.1 and SAS-3 standards and can support PCIe applications. The reduced size of the interconnects saves additional 30% to 50% PCB space; a low profile PCIe card can accomodate 4 Mini-SAS HD connectors versus 2 SAS connectors. DATA AND DEVICES /// MINI-SAS HD CONNECTORS & CABLE ASSEMBLIES Internal Applications Internal Mini-SAS HD Connector TE’s internal Mini-SAS HD connector is a 12 Gb/s highdensity, high-speed interface capable of supporting an aggregate data rate of 48 Gb/s per connector (12G x 4 lanes) with a version capable of transferring an aggregate data rate of 192 Gb/s. Designed to be approximately 30% smaller than conventional internal Mini-SAS connectors, the internal Mini-SAS HD connector enables you to save precious PCB space. Additionally, the connector has been Features adopted by SAS 2.1 and SAS 3 specifications. • High Density, High-Speed: Aggregate data transfer of 48 Gb/s; capable of transferring 192 Featuring both right angle and vertical orientations, Gb/s in the 1x4 version TE’s internal Mini-SAS HD interconnects suit a variety of architectures in multiple applications: enterprise storage, • Compact Size: 0.75mm contact high-performance computing, networking and data centers. pitch that’s 30% smaller than The connector supports direct passive and active copper existing products cable assemblies. • Electrical • • Current rating: Signal application only Press-fit termination • Pre-assembled, one-piece • and SAS-3 at 12 Gb/s requirements Voltage rating: 30 volts AC • connector Signal integrity performance meets SAS-2.1 at 6 Gb/s • Faster Installation: orientation • Flexibility: • Plug insertion force: 50N Max • Plug extraction force: 25N Max • Latch retention: 50N Min • Durability: 250 cycles Materials • Receptacle housing: LCP • Contacts: Copper Alloy • Chicklets: LCP 1x1, 1x2 and 1x4 configurations available Mechanical • Keying for proper plug • Plug options for direct passive and active copper cable assemblies • Stacked board interface with 36 positions per 1x1 • Error-Proof: Screw mounted for additional retention • 100 Ohm impedance Protocols /Specifications • SAS-2.1 at 6 Gb/s • SAS 3.0 at 12 Gb/s • SFF-8643 Technical Documents • Product Specification: 108-32038 • Application Specification: 114-32101 DATA AND DEVICES /// MINI-SAS HD CONNECTORS & CABLE ASSEMBLIES PAGE 2 INTERNAL APPLICATIONS Internal Applications Internal Mini SAS HD Connector Part Numbers Part Number 2227580-1 2227581-1 2227582-1 2227595-1 2227640-1 2227642-1 Orientation Right Angled Press-fit Right Angled Press-fit Right Angled Press-fit Vertical Press-fit Vertical Press-fit Vertical Press-fit Configuration Impedance 1x1 100 Ohms 1x2 100 Ohms 1x4 100 Ohms 1x1 100 Ohms 1x2 100 Ohms 1x4 100 Ohms DATA AND DEVICES /// MINI-SAS HD CONNECTORS & CABLE ASSEMBLIES PAGE 3 Internal Applications Internal Mini-SAS HD Cable Assembly TE’s internal Mini-SAS HD cable assembly offers system designers with a high speed connection packaged in an extremely flexible, small design. Performing at 12 Gb/s per lane at four lanes, the product transfers data at a total rate of 48 Gb/s. Paired with our internal Mini-SAS HD receptacle, the connector can drive higher aggregate data rates of 192G. Designed with Madison Cable brand TurboTwin cable Features • High Speed: Transfers data at and a short 18mm connector (plug), the cable assembly 12 Gb/s; total aggregate data improves airflow while saving additional PCB space. transfer per connector is 48 Gb/s These advantanges are critical for internal, inside-the-box applications that demand efficient space usage. The cable assembly is available with either a round • Greater Airflow + Space Savings • • jacket or discrete pairs with braided sleeving. It comes in multiple lengths ranging from .3m to 1m and is designed for reliability through use of an abrasion and cut-resistant Design Flexibility • 4x and 8x configurations • Lengths from 0.3m through 1m cable jacket. This jacket additionally shields isolation to maintain signal integrity. • Compliant to SAS 3.0 at 12 Gb/s ; SAS 2.1 at 6 Gb/s • Attenuation: 100 Ohm 3.7 dB/m at 6 GHz ; 85 Ohm 4.3 • material Mechanical Compliant to SFF-8643 • Durability: 250 mating cycles • Latch retention: 40N min • Right angle pull: 15N min Materials • PVC or Halogen-free (class 3) PCBA cable jacket options • UL VW-1 Rated Available in either PVC or halogen-free cable jacket dB/m at 6 GHz • Straight and right angle cable connector configurations Electrical • Short 18mm length connector • 85 or 100 Ohm impedance • Customizable to meet system requirements • Robust Design: Cable jacketed for abrasion/cut resistance and shield isolation (no metallic edges) Protocols / Specifications • REACH and RoHS II compliant • SAS-2.1 at 6 Gb/s Technical Documents • Compliant to SFF-8643 • Product Specification: 108-32038 DATA AND DEVICES /// MINI-SAS HD CONNECTORS & CABLE ASSEMBLIES • SAS 3.0 at 12 Gb/s • Compatible with PCIe Gen 3 PAGE 4 Internal Applications Internal Mini-SAS HD Cable Assembly Part Numbers Part Number Cable Assembly Type Cable Type Impedance Assembly Length (M) 2821713-1 4i, Straight to Straight plugs Round Jacketed 85 0.3 2821713-2 4i, Straight to Straight plugs Round Jacketed 85 0.5 2821713-3 4i, Straight to Straight plugs Round Jacketed 85 0.7 2821713-4 4i, Straight to Straight plugs Round Jacketed 85 1.0 2820335-1 4i, Straight to Straight plugs Discrete 85 0.3 2820335-2 4i, Straight to Straight plugs Discrete 85 0.5 2820335-3 4i, Straight to Straight plugs Discrete 85 0.7 2820335-4 4i, Straight to Straight plugs Discrete 85 1.0 2820350-1 4i, Straight to Straight plugs Discrete 100 0.3 2820350-2 4i, Straight to Straight plugs Discrete 100 0.5 2820350-3 4i, Straight to Straight plugs Discrete 100 0.7 2820350-4 4i, Straight to Straight plugs Discrete 100 1.0 2821709-1 4i, Right Angle to Right Angle plugs Round Jacketed 85 0.3 2821709-2 4i, Right Angle to Right Angle plugs Round Jacketed 85 0.5 2821709-3 4i, Right Angle to Right Angle plugs Round Jacketed 85 0.7 2821709-4 4i, Right Angle to Right Angle plugs Round Jacketed 85 1.0 2820325-1 4i, Right Angle to Right Angle plugs Discrete 85 0.3 2820325-2 4i, Right Angle to Right Angle plugs Discrete 85 0.5 2820325-3 4i, Right Angle to Right Angle plugs Discrete 85 0.7 2820325-4 4i, Right Angle to Right Angle plugs Discrete 85 1.0 2820328-1 4i, Right Angle to Right Angle plugs Discrete 100 0.3 2820328-2 4i, Right Angle to Right Angle plugs Discrete 100 0.5 2820328-3 4i, Right Angle to Right Angle plugs Discrete 100 0.7 2820328-4 4i, Right Angle to Right Angle plugs Discrete 100 1.0 2821711-1 4i, Straight to Right Angle plugs Round Jacketed 85 0.3 2821711-2 4i, Straight to Right Angle plugs Round Jacketed 85 0.5 2821711-3 4i, Straight to Right Angle plugs Round Jacketed 85 0.7 2821711-4 4i, Straight to Right Angle plugs Round Jacketed 85 1.0 2820330-1 4i, Straight to Right Angle plugs Discrete 85 0.3 2820330-2 4i, Straight to Right Angle plugs Discrete 85 0.5 2820330-3 4i, Straight to Right Angle plugs Discrete 85 0.7 2820330-4 4i, Straight to Right Angle plugs Discrete 85 1.0 2820332-1 4i, Straight to Right Angle plugs Discrete 100 0.3 2820332-2 4i, Straight to Right Angle plugs Discrete 100 0.5 2820332-3 4i, Straight to Right Angle plugs Discrete 100 0.7 2820332-4 4i, Straight to Right Angle plugs Discrete 100 1.0 DATA AND DEVICES /// MINI-SAS HD CONNECTORS & CABLE ASSEMBLIES PAGE 5 External Applications External Mini-SAS HD Connector TE’s Mini-SAS HD external receptacle connector is a high-density, high-speed IO interface adopted for the SAS 2.1 standard and proposed for SAS 3.0 standard. The product is designed to support 6 Gb/s and 12 Gb/s SAS applications. The assembly is offered in 4x, 8x, and 16x versions. Electrical • Connector signal integrity performance meets requirements of current SAS-2.1 at 6 Gb/s, and capable Features • for 6 and 12 Gbps of compliance with SAS-3 at 12 Gb/s • • Voltage rating: 120 volts AC • Current rating: Signal application only High Speed: Broadband design Board receptacle provides 1x1 (4x), 1x2 (8x) and 1x4 (16x) configurations Mechanical • • Plug insertion force: 100N Max • Plug extraction force: 50N Max • Latch retention: 133.5N Min • Durability: 250 cycles Materials Easy Installation: Preassembled, one-piece interconnect offers one-step placement onto PCB • Lightpipe options available • REACH and RoHS compliant • Improved cable latch design • Enhanced EMI skirt design • Scalable: 4x and 8x cable plug • Receptacle housing: LCP • Shield assembly: Nickel Silver • Contacts: Copper Alloy • EMI Spring: Copper Alloy • Threaded nut: Brass Protocols / Specifications • Chicklets: LCP • SAS-2.1 at 6 Gb/s options • 26, 28, and 30 AWG bulk cable • SAS-3 at 12 Gb/s External Mini SAS HD Connector Part Numbers P/N Description 2149027-1 1x1 Receptacle Assembly 2149966-1 1x2 Receptacle Assembly 2149375-1 1x4 Receptacle Assembly 2198484-1 1X1 Receptacle Assembly with lightpipe 2198483-1 1x2 Receptacle Assembly with lightpipe 2180736-1 1x4 Receptacle Assembly with lightpipe 2274215-1 1x1 Rec Assembly with additional solder points 2214869-1 1x2 Rec Assembly with additional solder points 2214870-1 1x4 Rec Assembly with additional solder points DATA AND DEVICES /// MINI-SAS HD CONNECTORS & CABLE ASSEMBLIES • SFF-8644 Technical Documents • Product Specification: 108-2462 • Application Specification: 114-3316 PAGE 6 External Applications External Mini-SAS HD Copper Cable Assembly The passive direct attach external Mini-SAS HD copper cable assembly is designed for broadband operation optimized for 6 and 12 Gb/s. The EEPROM signature enables the host to identify what type and length of cable is connected to its port, and can be customized for any application. An improved latch design reduces the insertion force and increases the retention force. MADISON CABLE brand TurboTwin bulk cable, and the dual 4 pair cable exit backshell provide flexibility for routing. • Electrical • Features Fully compliant to SAS 2.1 at 6 Gb/s , SAS 3.0 at 12 Gb/s and SFF-8644 • Impedance: 100 Ohm • Shielded for EMI High-Speed: Broadband design for 6 and 12 Gb/s • Improved Cable Management / Airflow: Dual 4-pair cable design for flexibility and routability • Mechanical Design Flexibility: • Built with 12G Madison Brand • Cable backshell compliant to SFF-8644 mini-multilane TurboTwin cable and available in • interface specification Cable construction consists of 8 differential pairs bundles 2 and 24 AWG sizes 30 AWG, 28 AWG 26 AWG • cables with 4 pairs in each cable • Durability: 250 mating cycles • Latch retention: 44.5N min • Rotational cable pull: 16.7N min Cable lengths offered range from 0.5m to 8m • Offered in 4x and 8x configurations with EEPROM memory map compliance • Materials Customizable for specific applications • UL Type CL2 flammability rating • • REACH and RoHS II compliant Enhanced latch design for increased retention force and reduced insertion force • Part Numbers Minimum Maximum Length Length Low profile design Protocols / Specifications P/N Description Data Rate AWG 4-2337815-1 thru -8 4x Passive 6/12 G 26 0.5m 7m • SAS-3 at 12 Gb/s 2-2337815-1 thru -6 4x Passive 6/12 G 28 0.5m 5m • SFF-8644 • PCIe protocols • SAS-2.1 at 6 Gb/s 2337815-1 thru -4 4x Passive 6/12 G 30 0.5m 3m 2820306-1 thru -3 4x Passive 6/12 G 24 6m 8m 2202504-1 thru -8 8x Passive 6/12 G 26 0.5m 7m Technical Documents 2202505-1 thru -6 8x Passive 6/12 G 28 0.5m 5m • 2202506-1 thru -4 8x Passive 6/12 G 30 0.5m 3m 2821025-1 thru -3 8x Passive 6/12 G 24 6m 8m 2202507-1 thru -8 4x Passive 6G 26 0.5m 7m 2202508-1 thru -6 4x Passive 6G 28 0.5m 5m 2202509-1 thru -4 4x Passive 6G 30 0.5m 3m DATA AND DEVICES /// MINI-SAS HD CONNECTORS & CABLE ASSEMBLIES Product Specification: 108-2462 PAGE 7 Mini-SAS High Density Connectors & Cable Assemblies TE Technical Support Center USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico: +52 (0) 55-1106-0800 Latin/S. America: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 te.com/products/minisashd Madison Cable, TurboTwin, TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2018 TE Connectivity Ltd. family of companies All Rights Reserved. 7-1773461-9  9/18   DND DATA AND DEVICES /// MINI-SAS HD CONNECTORS & CABLE ASSEMBLIES