2154235-2

LUMAWISE LED Holders TE Solderless LED Socket, Type LS The TE Solderless LED Socket, type LS is a quick termination connector system for use with the Philips Lumileds LUXEON S. The connector features easy, snap-together tool-less insulation displacement termination to the customer’s commonly available 24awg wire. Termination to the LUXEON S LED is simplified by the use of an easily applied locator frame that pre-positions the LED on a customer’s heatsink prior to final connectorization using the socket. To further enhance integration capabilities, the socket is offered in a version that includes snap-attach features allowing the use of custom or off-the-shelf optical solutions. KEY FEATURES The TE solderless LED socket, type LS eliminates the need to design, manufacture • Solderless termination to LUXEON S LED • Integral optics attachment features • LED locator to aid assembly • Three screw attachment using M3 or and integrate a complex metal clad circuit board (MCPCB) assembly into the lighting fixture. This frees the lighting fixture designer to move beyond the limitations inherent in a planar MCPCB LED assemblies. The ability to easily place an LED anywhere in a fixture using simple hand tools provides the fixture designer with a broad range of novel integration possibilities. #4 screws • No-strip IDC termination of 24 AWG solid & stranded wires • Integral thermal spring frame helps provide adequate normal force for LED to heat sink • Low profile – housing optical interference