218M722-19A15

CODE 18 - DIRECT COUPLING, LOW PROFILE HEAT SHRINK BOOT BACKSHELL 218M516-19B SERIES DASH NUMBER (TABLE 1) MANUFACTURER CODE SEE TABLE 2 MATERIAL REFER TO CH00-0250-004 FINISH REFER TO CH00-0250-004 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATION, SEE CH00-0250-004. 3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-218M516-19B). 4. BACKSHELL MATES TO MIL-DTL-5015D, CLASS A, E & R, MS3100, MS3101 & MS3106. 5. ALL THREAD SIZES FOR ORDER APPLY. 6. ADDITIONAL PIECE(S) SUPPLIED WHEN CONNECTOR MFR IS UNKNOWN (D IN TABLE 2) 7. OPTIONAL DESIGN FEATURE WHEN REQUIRED TO ALLOW SUFFICIENT SHOULDER FORWARD OF BOOT GROOVE DRAWN K.WINCZURA 3RD ANGLE PROJECTION NOT TO SCALE 25/09/2015 CHECKED APPROVED K.SHEPPARD APPROVED DATE 25/09/2015 H.SMITH 25/09/2015 06/10/2015 REVISIONS LTR DESCRIPTION G REVISED PER ECN AD93042 H REVISED PER ECO-15-014373 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DA TE APPROVED 06/10/2015 H.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 TITLE: DIRECT COUPLING, LOW PROFILE HEAT SHRINK BOOT BACKSHELL ASSY USED ON: MIL-DTL-5015D TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT 218M5XX H 1 22,50 `0,20 8,89 MAX 7 3,50 ØZ XXXX ØB A THREAD X SILICONE O-RING ØY A PART MARK HERE A TABLE 1 10 11 12 14 16 18 20 22 24 28 32 36 40 44 48 TABLE 2 MFR CODE A B C D R - 8S 8S 8S 8S 10S 10SL 10SL 10SL 12 & 12S 12 & 12S 12 & 12S 14 & 14S 16 & 16S 18 20 20 20 22 24 28 32 32 32 36 36 36 36 36 40 40 40 44 48 48 48 A THREAD ØB MAX ØZ MIN ØY MAX X +0,20/-0,00 3/8-32 UNEF 7/16-28 UNEF 7/16-27 UNS 5 1/2-28 UNEF 9/16-24 UNEF 5/8-24 UNEF 5 5/8-24 UNEF 11/16-24 UNEF 5 3/4-20UNEF 7/8-20 UNEF 1-20 UNEF 1 1/8-18 UNEF 1 1/8-24 UNS 5 1 1/4-18 UNEF 1 3/8-18 UNEF 1 5/8-18 UNEF 1 7/8-16 UN 1 29/32-18 UN 5 2 1/16-16 UNS 2 1/16-20 UNS 2 1/8-16 UN 2 1/8-18 UNS 5 2 5/16-16 UN 2 3/8-16UN 5 2 5/8-16 UN 2 13/16-18 UNS 2 7/8-16 UN 5 20,1 20,1 20,1 20,1 20,1 23,1 23,1 23,1 23,1 24,6 24,6 26,4 29,5 32,8 35,8 35,8 35,8 39,1 42,2 48,5 54,9 54,9 54,9 61,2 61,2 61,2 61,2 61,2 67,6 67,6 67,6 74,6 81,0 81,0 81,0 6,22 7,80 7,80 7,80 9,40 11,00 12,57 11,00 12,57 14,15 12,57 15,75 18,92 20,50 25,27 25,27 25,27 28,45 31,62 34,80 41,15 41,15 41,15 47,50 47,50 47,50 47,50 47,50 53,85 53,85 53,85 60,20 66,55 66,55 66,55 13,16 13,16 13,16 13,16 14,99 14,99 19,28 19,28 19,28 19,28 19,28 20,91 24,08 26,07 34,04 34,04 34,04 36,28 40,49 43,03 48,37 48,37 48,37 54,72 54,72 54,72 54,72 54,72 60,63 60,63 60,63 67,10 73,46 73,46 73,46 1,11 1,11 1,11 1,11 1,11 1,11 1,11 1,11 1,11 1,11 1,11 1,11 1,11 1,11 1,75 1,75 1,75 1,75 1,75 2,18 2,18 2,18 2,18 2,18 2,18 2,18 2,18 2,18 2,18 2,18 2,18 2,18 2,18 2,18 2,18 CONNECTOR MANUFACTURER (MS 3100, MS 3101 & MS 3106) AMPHENOL - CLASS A BENDIX - CLASS A, E & R CANNON - CLASS A, E & R MFR UNKNOWN, CLASS A, E & R AMPHENOL - CLASS R MFR CODE NOT REQUIRED DRAWN K.WINCZURA DATE 3RD ANGLE PROJECTION NOT TO SCALE 25/09/2015 25/09/2015 CHECKED APPROVED K.SHEPPARD APPROVED MFR CODE TABLE 3 B C A, R D 6 C A, B, R D 6 B, C A, R D 6 A, B, C R D 6 B, C A, R D 6 B R C A D 6 B A, C, R D 6 C A, R D 6 H.SMITH 25/09/2015 06/10/2015 REVISIONS LTR DESCRIPTION G REVISED PER ECN AD93042 H REVISED PER ECO-15-014373 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DA TE APPROVED 06/10/2015 H.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 28,40 MAX SILICONE O-RING A THREAD 08 SHELL SIZE ØB ORDER NUMBER 6 TITLE: DIRECT COUPLING, LOW PROFILE HEAT SHRINK BOOT BACKSHELL ASSY USED ON: MIL-DTL-5015D TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT 218M5XX H 2