2213831-3

LUMAWISE Endurance S ZHAGA BOOK 18 / Z10 STREET LIGHT CONNECTORS: REDUCE THE COMPLEXITY OF STREET LIGHTING ARCHITECTURE TE Connectivity (TE)’s LUMAWISE Endurance S Connector System is a complete set of products specially designed for street and area lighting. There are two main offerings. The original Endurance S Zhaga Book 18 connector system enables D4i controlled Zhaga Book 18 compliant luminaires while the Endurance S Keyed Connector System enables non-Book 18 applications like Z10. LUMAWISE Endurance S includes a receptacle, mounted to a street or area light fixture, as well as several base and domes, that together form a robust enclosure for sensor modules and network lighting control systems. The design is compact, UV resistant, IP66 seal rated and can be mounted on the top, bottom or even the side of a luminaire, offering flexibility to the designer. Extending from the Endurance S portfolio is the S2 receptacle. Offered in both Zhaga Book 18 and Z10 enabled keyed varieties the S2 receptacle introduces a two-wire per contact solution for ease of wiring and applied cost savings in luminaires with dual node architecture. LUMAWISE ENDURANCE S CONNECTORS HAVE BEEN DESIGNED AS A STANDALONE SYSTEM AND CAN BE USED IN A COMPLEMENTARY FUNCTION AS AN AUXILIARY SENSOR MODULE WHEN ADDITIONAL FUNCTIONALITY IS REQUIRED IN ANSI/NEMA BASED LIGHTING FIXTURES. INSTALLATION IS EASY AND FAST. PUSHAND-TWIST WITH ONE HAND LOCKING DOES NOT REQUIRE ANY SPECIAL TOOLS. INDUSTRIAL / LUMAWISE ENDURANCE S STREET LIGHT CONNECTORS LUMAWISE Endurance S ZHAGA BOOK 18 CONNECTOR SYSTEM FEATURES: APPLICATIONS: • Compact size allowing greater flexibility in luminaire design • Street and Area Lighting • IP66 sealing with no mounting screws • Simple insert and rotate to lock feature, no tooling needed and one handed operation to install allows luminaires to be simply and quickly upgraded • High impact protection - IK09 rating • Flexible mounting position. Top mounted, side mounted and bottom mounted facing • Roadway Lighting • Commercial/Municipal Outdoor Lighting • Outdoor Luminaires - Wall Packs - Parking Lots - Walkways Photo Controls • City Management System • Sensor modules i.e. motion • Scalable solution allows use of Ø40mm and a Ø80mm controls with the same connection interface • Poke-in contact design reduces logistics issues with needing different wire lengths for different luminaires • CB certification ELECTRICAL: MATERIALS: • Contact rating: 5A, 250V • Meets 10kV dielectric withstand voltage to mounting surface 4 pole contacts • PBT receptacle • LSR gasket • Polycarbonate domes MECHANICAL: • Mounting: • UL UV-f1 rated for outdoor use M20X1.5 thread • Height above luminaire: 10mm SPECIFICATIONS: • IP65 & IP66 • Product: 108-133073 108-160194 • Thread length: 18.5mm • Application: 114-133074 114-160106 • IK09 rated system solution • Rated IEC61984 and UL773 • Receptacle: Ø30mm • Gasket: Ø36.5mm • CB Certified INDUSTRIAL / LUMAWISE ENDURANCE S STREET LIGHT CONNECTORS LUMAWISE Endurance S ZHAGA BOOK 18 CONNECTOR SYSTEM Product Selection Information 40mm BASE / DOMES RECEPTACLE / SEALING CAP Part Number 2213858-1 2363638-1 1-2363638-1 Description Receptacle (includes sealing ring, washer & nut) Color Height - - - - Receptacle S2 (includes sealing ring, washer & nut) Receptacle S2 w/color code (includes sealing ring, washer & nut) 2213795-1 2213795-2 Sealing Cap Dark Gray Light Gray - Part Number Description Color Height 2213837-1 Base - - 2329013-1 Dome Smoke Gray (24.25mm) 2329013-2 Dome Smoke Gray (39.25mm) 1-2329013-2 Dome Clear Low Tall Tall (39.25mm) Receptacles and mounting hardware available to purchase separately. Receptacle S2 2329013-2 LUMAWISE Endurance S Dome Smoke Gray - Tall - 40mm 2213837-1 LUMAWISE Endurance S Base 40mm 2363638-1 LUMAWISE Endurance S2 Receptacle LUMAWISE Endurance S products represented on this page are not shown actual size. INDUSTRIAL / LUMAWISE ENDURANCE S STREET LIGHT CONNECTORS Stripped wire inserted into housing Wire poke-in locations (4) Pin # Function 1 +24V power supply 2 Negative pole for Dali or Dali based protocol & shared ground return for 24V power supply 3 Positive pole for Dali or Dali based protocol 4 General digital I/O (greater than 7V) LUMAWISE Endurance S ZHAGA BOOK 18 CONNECTOR SYSTEM OPTIONAL ACCESSORIES 80mm BASES / DOMES Product Selection Information Part Number Description Color Height 2213831-3 Base - - 2213831-2 Base with Vent - - 2328823-1 Dome Smoke Gray (33.43mm) 1-2328823-1 Dome Clear 2328823-2 Dome Smoke Gray 1-2328823-2 Dome Clear 2328823-3 Dome Smoke Gray 1-2328823-3 Dome Clear 1-2337216-1 Skirt Black - 1-2337216-2 Skirt Light Gray - 1-2337216-3 Skirt Dark Gray - Low Low (33.43mm) Medium (43.43mm) Medium (43.43mm) Tall (58.43mm) Tall (58.43mm) Optional skirt physically closes the gap between control module and lighting fixture enhancing aesthetics and further protecting from entrance of water, dust and insects. INDUSTRIAL / LUMAWISE ENDURANCE S STREET LIGHT CONNECTORS LUMAWISE Endurance S Z10 ENABLED CONNECTOR SYSTEM RECEPTACLE / SEALING CAP Part Number 2343403-1 Description S Receptacle (includes sealing ring, washer & nut) 40mm / 80mm BASES A Black 1-2363638-2 S2 Receptacle w/color code (dual wire poke-in includes sealing ring, washer & nut) Black A Sealing Cap • Strong wire-trap poke-in retention • Light colored wire entry surface • Directional washer A Dual Wire Entry Locations Light Gray A White Part Number Description Key 2343405-1 40mm Base A 2-2343404-1 80mm Base A 1-2343404-1 80mm Base with vent A Part Number Description Color 1-2329013-1 40mm Dome Clear 1-2329013-2 •R  eceptacle connector with double poke-in wire entry • Compression stop on sealing gasket Dark Gray 2341474-1 FEATURES (S2 Receptacle PN 2363638) • Wire release feature 2363638-2 2341474-2 Key Black S2 Receptacle (dual wire poke-in includes sealing ring, washer & nut) 2341474-3 40mm DOMES Color 40mm Dome Clear Height Low (24.25mm) Tall Stripped wire inserted into housing (39.25mm) 80mm DOMES Wire poke-in locations (4) 1-2328823-1 80mm Dome Clear 1-2328823-2 80mm Dome Clear 1-2328823-3 80mm Dome Clear Additional dome colors also available, refer to previous pages for more information Additional keying combinations available; contact Product and Customer Support. INDUSTRIAL / LUMAWISE ENDURANCE S STREET LIGHT CONNECTORS Low (33.43mm) Medium (43.43mm) Tall (58.43 mm) RECOMMENDED PIN OUT FOR 0-10V DIMMING CONTROL APPLICATION Pin # Function 1 DC+ 2 0-10V DIM-DC 3 0-10V DIM+ 4 OPTIONAL Colored wire insertion markings and additional keying solutions are also available, contact Product and Customer Support. LUMAWISE Endurance S CONNECTOR SYSTEM Dome Base Receptacle 1-2343404-1 LUMAWISE Endurance S Base with Vent Key A 80mm Flat surface for label placement. An optional vent in the 80mm base assembly enables pressure optimization inside the sealed control module. The vent also helps to minimize condensation through vapor diffusion. LUMAWISE Endurance S products represented on this page are shown actual size. TE Connectivity is a participating member of the Zhaga Consortium, an industry-wide cooperation enabling Keying feature of base aligns with equivalent Keying feature on Receptacle for protected mating. the interchangeability of LED light sources and simplifying LED applications for general lighting. te.com © 2021 TE Connectivity. All Rights Reserved. LUMAWISE, TE Connectivity, TE connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. 05/21 INDUSTRIAL / LUMAWISE ENDURANCE S STREET LIGHT CONNECTORS