2217001-1

AMP-O-LECTRIC MODEL G II TERMINATOR Designed for the ultimate in flexibility, reliability, and safety. For Wire Processing Wire Processing for Crimp Terminals Engineered with the operator in mind. Precision matters. The Model G II is one of the quietest terminators All Model G II Terminator versions include preci- on the market. It features improved access to, and sion adjustment for crimp height — an important significantly updated lighting in the under cabinet feature, which, in combination with the optional and target areas, and includes a variable speed Crimp Quality Monitor (CQM II), enables repeat- option which gives the operator more flexibility able, tight crimp tolerances required for today’s for those tricky applications that benefit from demands for higher levels of quality. By simply re- slower ram and feed speeds. And, with its tool-less setting a dial, the operator can adjust crimp height changeover capability, setup is both quick and in 0.013mm [.0005”] increments over a 0.457mm easy. [.018”] range. Safety first. Complete control. Improved guarding on the Model G II terminator Our user-friendly LCD control panel includes sim- provides open access for quick and smooth instal- ple button controls for: motor powering on and lation of both end-feed and side-feed applicator off, adjusting the ram speed, jogging the motor styles and meets applicable CE and domestic forward or in reverse, switching to split-cycle oper- safety requirements. ation, work lighting, air feed, and batch counter reset. For improved quality, the controls also detect and report errors in the machine and stop cycling when a bad crimp is detected by the CQM II. Maximize Efficiency. Increase Repeatable Performance. Consider adding a Crimp Quality Monitor (CQM II) and strip module to your Model G II terminator. This allin-one approach will allow you to strip and crimp terminals on the same machine, all while giving you realtime crimp quality monitoring to make sure you are working at 100% efficiency. For additional information on the Stripping Module download catalog #65004 from www.tooling.te.com For Additional information on the CQM II download catalog #82275 from www.tooling.te.com APPLICATION TOOLING /// MODEL G II TERMINATOR AMP-O-LECTRIC Model G II Terminator Part Number Description 2217000-1 1 2217000-2 1 2217001-1 1 2217001-2 1 2217002-1 1 2217002-2 1 Base unit With CQM II With stripper module With stripper module and CQM II Splice machine for end- and side-feed splice applicators Splice machine for end- and side-feed splice applicators, with CQM II Note: To operate HDM style applicators with this machine, order airfeed assembly kit P/N 2217339-1. 1 CE Approved Specifications Dimensions (without terminal reel and reel support) Customer Manual - 409-32035 Capacity: 2268 kg [5000 lb] maximum crimp force Air: Pneumatic 550 kPa [80 psi] for models with stripper module. Available as an optional kit for all other models. Electrical: 100/240 VAC, ± 10% AC, 50/60 Hz, Single phase Height: 520.7mm [20.5”] Depth: 546.1mm [21.5”] Width: 553.7mm [21.8”] Weight: Approx. 104 kg [230 lb] Stronger, Smarter, More Reliable Applicator. Waste Not. Want Not. Whether its time or scrap, in manufacturing everyone knows that waste costs money. With our on-site certification and consultation services, we can help you: If you are looking to increase production and improve crimp consistency consider adding an OCEAN applicator to your wire crimping process. The OCEAN applicator’s flexible design is quickly adaptable to a wide variety of terminal configurations and features: • Tool-less fine adjustment capabilities for wire & insulation crimps • 3 feed options (mechanical, pneumatic, and servo) • For additional information download catalog #4-1773460-5 from www.tooling.te.com. • • • • Reduce downtime Reduce scrap Maintain crimp quality Improve manufacturing efficiency Connect with us today to learn more. • E-mail: fieldservicesnorthamerica@te.com • Phone: 800-722-1111 or 717-986-3434 • For additional information download catalog #1-1307619-0 from www.tooling.te.com. tooling.te.com 1-1773736-1 / 01-15 © 2015 TE Connectivity Ltd. family of companies. All Rights Reserved. AMP-O-LECTRIC, TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. For more information call: 888-777-5917 or 717-810-2080 APPLICATION TOOLING /// MODEL G II TERMINATOR In the interest of continuous improvement, TE reserves the right to modify, discontinue or replace any products.