222K163-100-0

Materials -100 Low-Fire-Hazard Material Product Facts Heat-shrinkable, semiflexible molded shapes for low fire hazard applications ■ Low-smoke index as defined by BS G 198 Part 5 ■ Low-toxicity index as defined by NES 713 ■ High-temperature index as defined by ISO 4589-3 ■ 4 Molded Parts Applications TE heat-shrinkable molded parts in -100 material form part of System 100. The molded parts are designed for use in conjunction with Zerohal cable and tubing for applications where hazard reduction in the event of fire is crucial. The material exhibits excellent fire safety characteristics combined with low-smoke and low-acid-gas emission while retaining good mechanical and fluidresistant properties. -100 parts with adhesive lining provide location, sealing, and strain relief of cableconnector terminations and cable–cable transitions on harnesses used where there is a need to lower the risk (such as in marine applica- Available in: tions, mass transit systems, and offshore installations), or where equipment would be irreparably damaged by the corrosive products of combustion. Available in a wide range of configurations, -100 parts will operate continuously from -30°C to 105°C [-22°F to 221°F]. The standard color is black. Operating Temperature Range -30°C to 105°C [-22°F to 221°F] Installation -100 molded parts will shrink on the application of heat above 120°C [248°F]. Recommended installation temperature: 150°C [302°F] Americas Europe Asia Pacific ■ ■ ■ 4-43 Catalog 1654025 Revised 5-12 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Materials -100 (Continued) Specifications/Approvals Military/NAVSEA 5617649 (U.S.) Def. Stan 59-97, Issue 3, Type DF (Europe) BSG 198 Part 5 Type DF (Europe) BR1326 listed Class C VG95343 Part 29 & 30 SAE-AS85049/ 140, 141, 142 (material designator G) TE RW-2082 — — — Product Characteristics Electrical Tensile strength Ultimate elongation 2% secant modulus Specific gravity Heat aging for 168 h at 150°C [302°F] Heat shock for 4 h at 225°C [437°F] Low-temperature flex at -30°C [-22°F] Limiting oxygen index Temperature index Flammability (burn time) Smoke index Toxicity index Electric strength Water absorption — Physical Thermal Fire safety properties ISO 1817 Gasoline fuel Fluid resistance Lubricating oil O-149 Hydraulic fluid H515 Specification Requirements 8 MPa (min.) 200% (min.) 130 MPa (max.) 1.5 (max.) Ultimate elongation 100% (min.) No dripping, cracking, or flowing No cracking during mandrel bend 29 min. 250°C [482°F] (min.) 100 s (max.) 20 (max.) 5 (max.) per 100 g 15 MV/m (min.) 0.75% (max.) at 23°C [73°F] 3.5% (max.) at 70°C [158°F] Tensile strength 5 MPa (min.) Ultimate elongation 150% (min.) Tensile strength 5 MPa (min.) Ultimate elongation 150% (min.) Tensile strength 5 MPa (min.) Ultimate elongation 150% (min.) Test Method ISO 37 ISO 37 ASTM D 882 ISO 1183 ISO 188, ISO 37 ASTM D 2671 ASTM D 2671 ISO 4589-2 ISO 4589-3 ASTM D 635 BSG 198 Part 5 NES 713 IEC 243 ISO 62 ISO 1817 and ISO 37 after immersion for 24 h at 23°C [73°F] ISO 1817 and ISO 37 after immersion for 24 h at 50°C [122°F] ISO 1817 and ISO 37 after immersion for 24 h at 23°C [73°F] 4-44 Catalog 1654025 Revised 5-12 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015