2232942-1

Place hero product image here shorter square image space available. 110 LOW PROFILE POSITIVE LOCK RECEPTACLE & HOUSINGS For Gas Igniter Applications TE Connectivity (TE) quick disconnect terminals and housings have been industry leaders for years. TE continues to reinvent the product line to meet the changing trends. Recognizing that applications are getting smaller and requiring the assurance of a Positive Lock terminal, TE is pleased to continue enhancing and expanding our 110 low profile Positive Lock receptacle and housings. These newer products come with the same strong engineering support and high quality that TE has provided for over 50 years. RECEPTACLE FEATURES HOUSING FEATURES • Tab insertion confirmation – audible “snap” that can also be felt to assure tab insertion • Centers the receptacle for improved mating • Provides insulation to a Positive Lock receptacle • Low insertion / withdrawal force – assembly is safe and easy and tab-damage risk is reduced • The larger gripping and pushing surfaces for fingers allows for a ergonomically-friendly housing • Fast connect / disconnect – smooth insertion-tab mating and return back to original position • Accommodates the low insertion force, high retention force Positive Lock Mark III receptacle • Enhanced contact surface design – excellent electrical performance along with low insertion force • Fits within the confines of gas ingiter’s terminal cavity • UL recognized (file E28476) • Choice of two lengths (1.0 or 0.75 in.) allows matching the requirements of the igniter being used • UL recognized (file E28476) ELECTRONIC GAS IGNITER APPLICATIONS: • Cooking ranges • Gas grills • Similar applications where a gas flame must be ignited Gas igniter designs are not standardized across manufacturers; however, they typically use .110 x .032 in. tabs within cavities or shrouds for electrical connections. TE already offers a receptacle and housing specifically designed for this requirement, but a longer housing was needed for some applications. The new housing is 1.0 in. long, while the existing housing is 0.78 in. long. The same Positive Lock receptacle is used with either housing. APPLIANCES /// 110 LOW PROFILE POSITIVE LOCK RECEPTACLE & HOUSINGS 110 Low Profile Positive Lock Receptacle & Housings For Gas Igniters Close tolerances within the terminal shrouds or cavities of gas igniters require precise fitting of the housing and receptacle to permit proper mating with the tab. In the images below, light blue indicates space within the gas igniter shroud or cavity. Dark blue indicates the face of a receptacle housing. TAB TAB SMALLER SPACES Many of today’s gas igniters have their tabs centered within a shroud. As these designs are modified for increased space efficiency, the clearance around the tabs is becoming smaller. TAB SOME DO NOT FIT NEW SOLUTION FITS Traditional Positive Lock housing’s design does not center the receptacle within the housing, nor does it center the housing onto the tab. For tabs centered within shrouds, this style product often does not fit. The design of TE’s new low profile Positive Lock receptacle and housing centers the receptacle in the housing. It also centers the housing onto the tab. This allows the necessary clearance all around the tab. 1742975-1 110 LOW PROFILE POSITIVE LOCK MARK III RECEPTACLE • 22 - 18 AWG • .080 - .120 (2.03 - 3.05) insulation diameter range • Tin plated brass • Insertion force 4 - 6 lbs (1.8 - 2.7 kg) • Stock thickness 0.010 (0.25) 1969534-1 110 LOW PROFILE POSITIVE LOCK MARK III HOUSING • V-0 130°C Nylon material, natural color • Length is .78 inch (19.81) • Housing is lower profile than traditional Positive Lock housing • New design centers receptacle within the housing, allowing symmetrical clearance from the tab to the plastic shroud around tab 2232942-1 110 LOW PROFILE POSITIVE LOCK MARK III HOUSING • V-0 130°C Nylon material, natural color • Length is 1 inch (25.4) • Housing is lower profile than traditional Positive Lock housing • New design centers receptacle within the housing, allowing symmetrical clearance from the tab to the plastic shroud around tab APPLIANCES /// 110 LOW PROFILE POSITIVE LOCK RECEPTACLE & HOUSINGS 110 Low Profile Positive Lock Receptacle & Housings For Gas Igniters DESIGN-IN QUESTIONS 1. Do you need to make a connection to a gas igniter in your design? 2. Does the gas igniter have .110 x .032 in. tabs inside small shrouds on top of the igniter or within cavities in the igniter? 3. Are you looking for a more ergonomic way to apply the receptacles to the tabs? 4. Do you need to prevent the terminal from being pulled loose from the igniter? If the answers are “yes,” TE’s 110 low profile Positive Lock receptacle and housings likely represent a solution for the application. Depending on your particular application, you may select the new 1 in. long housing (2232942-1) or the 0.78 in. long housing (1969534-1). Either works with the 110 low profile Positive Lock receptacle (1742975-1). A: 1969534-1, 110 Positive Lock Mark III housing--0.78 in. long B: 2232942-1, 110 Positive Lock Mark III housing-- 1 in. long C: 2232942-1, 110 Positive Lock Mark III housing-- 1 in. long with 1742975-1, 110 Positive Lock Mark III receptacle applied E D: 1969534-1, 110 Positive Lock housing-0.78 in. long with 1742975-1, 110 D C Positive Lock receptacle applied E: 1742975-1, 110 Positive Lock Mark III receptacle applied to wire B A TE TECHNICAL SUPPORT CENTER USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico: +52 (0) 55-1106-0800 Latin/S. America +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 te.com te.com Positive Lock, TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2016 TE Connectivity Ltd. family of companies All Rights Reserved. 1-1773728-6   12/16   Original APPLIANCES /// 110 LOW PROFILE POSITIVE LOCK RECEPTACLE & HOUSINGS