225M508-19A

CODE 76 - HEAT SHRINK BOOT BACKSHELL 225M516-19C-D SERIES SHELL SIZE (TABLE 1) MATERIAL REFER TO CH00-0250-004 FINISH REFER TO CH00-0250-004 MODIFICATION CODE REFER TO CH00-0250-004 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-004. 3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-225M512-19B). 4. KNURL INSIDE BOOT GROOVE MAY BE SUPPLIED AT MANUFACTURER'S OPTION. 5. BACKSHELL MATES TO BS9522 N0001 PATT 603, BS9522 F0017 PATT 105, DEF. STAN. 59-35. DATE DRAWN K.SHEPPARD 03/08/2015 CHECKED 03/08/2015 APPROVED APPROVED H.SMITH 20/08/2015 REVISIONS LTR DESCRIPTION C REVISED PER ECO-13-017258 D REVISED PER ECO-15-012000 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE APPROVED 11/04/2013 I.MYONG 20/08/2015 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 H.SMITH TITLE: HEAT SHRINK BOOT BACKSHELL ASSY USED ON: PATT 105 / PATT 603 / DEF-STAN 59-35 TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT 225M5XX D 1 If this document is printed it becomes uncontrolled. Check for the latest revision 28,00 10,50 3,50 XXXX MEDIUM DIAMOND KNURL 4 PART MARK HERE TABLE 1 BASE PART NUMBER 225M508 225M510 225M512 225M514 225M516 225M518 225M520 225M522 225M524 DATE DRAWN K.SHEPPARD 03/08/2015 CHECKED 03/08/2015 APPROVED APPROVED H.SMITH 20/08/2015 REVISIONS LTR DESCRIPTION C REVISED PER ECO-13-017258 D REVISED PER ECO-15-012000 SHELL SIZE 08 10 12 14 16 18 20 22 24 A THREAD 7/16-28UNEF 9/16-24UNEF 11/16-24UNEF 13/16-20UNEF 15/16-20UNEF 1 1/16-18UNEF 1 3/16-18UNEF 1 5/16-18UNEF 1 7/16-18UNEF 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE APPROVED 11/04/2013 I.MYONG 20/08/2015 H.SMITH ØB MAX 17,3 20,3 23,8 26,8 29,8 33,3 36,3 39,8 42,8 ØD +0,0/-0,5 13,5 15,5 19,5 21,5 24,5 26,5 31,0 34,5 36,5 ØD ØG A THREAD ØF ØB E SILICONE O-RING 4 DRAIN HOLES WHEN 'D' MODIFICATION IS SPECIFIED E +0,20/-0,00 1,12 1,12 1,12 1,12 1,12 1,12 1,75 1,75 1,75 ØF MAX 15,0 18,0 21,5 24,5 28,0 31,0 34,0 37,0 40,5 ØG 7,2 9,8 13,5 15,9 19,0 21,4 24,6 27,8 31,0 TITLE: HEAT SHRINK BOOT BACKSHELL ASSY USED ON: PATT 105 / PATT 603 / DEF-STAN 59-35 TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD TE CAGE CODE: 06090 INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. POLAMCO/TE CAGE CODE: U5792 If this document is printed it becomes uncontrolled. Check for the latest revision DRAWING NO: DRAWING REV: SHT 225M5XX D 2