2286123-1

7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 5 4 3 2 20 LOC - ALL RIGHTS RESERVED. - 1 REVISIONS DIST - P LTR DESCRIPTION RELEASED PER ECO 14-003827 A 11.81 DAUGHTERCARD EDGE 2 5 6 PAD CONTACT AREA DATE DWN APVD CT 3-31-14 DH 0.19 HOUSING 1 HOUSING: LCP, UL94V0, COLOR: BLACK. CONTACT: PHOSPHOR BRONZE. POST: BRASS WIRE 2 CONTACT: 1.27µm MIN GOLD IN PAD CONTACT AREA, 1.27µm MIN TIN-LEAD (93/7) ON PCB TAIL OVER 1.27µm MIN. NICKEL OVER ALL. POST: 1.27µm MIN NICKEL PLATED. 3 D PLATED THROUGH HOLE PER 114-13056, FIGURE 4 D 4 SEE TABLE 1 FOR INTERCONNECTIONS TO BACKPLANE CONNECTOR. 5 CONTACT: 1.27µm MIN GOLD IN PAD CONTACT AREA, 1.27µm MIN TIN ON PCB TAIL OVER 1.27µm MIN. NICKEL OVER ALL. POST: 1.27µm MIN NICKEL PLATED. 6 CONTACT: 1.27µm MIN GOLD IN PAD CONTACT AREA, 1.27µm MIN TIN-LEAD (60/40) ON PCB TAIL OVER 1.27µm MIN. NICKEL OVER ALL. POST: 1.27µm MIN NICKEL PLATED. 18.40 TABLE 1 "x" DESIGNATES THE COLUMN NUMBER 5.50 REF 2.50 2 PLC 1.41 TYP TYPICAL INTERCONNECTIONS FOR COLUMN (WAFER) 3 CONTACT USAGE SIGNAL PAIR DAUGHTERCARD CONNECTOR PIN BACKPLANE CONNECTOR PIN bx bx ax SIGNAL PAIR C 5.40 REF -X- 1.80 REF 7 PLC 10.00 10.50 12.60 REF 1.50 WAFER #1 2 5 POST 1.35 REF 6 PLC 2 5 CONTACT REF SIGNAL PAIR 6 16 SIGNAL CONTACTS OUTLINE FOR CLARITY 0.56 2 10.85 CONTACT USAGE REF 10.85 REF 3 dx cx ex gx fx hx ax, bx, ex, fx, ix ax, dx, gx (ALL COMMONED) TYPICAL INTERCONNECTIONS FOR COLUMN (WAFER) 5,6,8 4 6 POWER CONTACT GROUPS OUTLINED FOR CLARITY 1.35 TYP cx bx SIGNAL PAIR CONTACT USAGE CONTACTS NOT CONNECTED 3 PLC 9.35 BACKPLANE CONNECTOR PIN SIGNAL PAIR GROUNDS 4 SIGNAL PAIRS OUTLINED FOR CLARITY 2.21 REF DAUGHTERCARD CONNECTOR PIN SIGNAL PAIR 56 HOLES cx, dx, gx, hx TYPICAL INTERCONNECTIONS FOR COLUMN (WAFER) 0.05 SEE NOTE ix (ALL COMMONED) 6 2 HOLES PIN "g8" B gx SIGNAL PAIR 7.2 fx cx, fx GROUNDS C ex ex SIGNAL PAIR CONNECTOR KEEPOUT AREA 4 dx SIGNAL PAIR 3.70 ax SIGNAL DAUGHTERCARD CONNECTOR PIN BACKPLANE CONNECTOR PIN bx cx ax SIGNAL 4 5.40 REF SIGNAL 7.20 REF dx SIGNAL -X- 12.60 REF gx gx hx ax, dx, fx, ix cx, ex GROUNDS 16.08 ex fx SIGNAL B bx (ALL COMMONED) TYPICAL INTERCONNECTIONS FOR COLUMN (WAFER) 1,4,7 -X0.84 REF 4 12.50 POWER 1.50 1.8 7 PLC GROUND 11 PLC DAUGHTERCARD CONNECTOR PIN CONTACT USAGE POWER PIN "a1" NOT CONNECTED TOP OF MOTHERBOARD THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm PC BOARD LAYOUT (CONNECTOR SIDE) SCALE 8:1 MATERIAL 0.5 0.13 - FINISH SEE TABLE DWN 3-31-14 CHK 3-31-14 APVD 3-31-14 C.C.THOMAS D.HOANG TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES 1 4805 (3/11) ax,bx,cx,dx dx ex ex,fx,gx DAUGHTERCARD EDGE A ax,bx,cx 2.64 REF REF D.HOANG NAME 108-2072 APPLICATION SPEC 114-13056 WEIGHT 5.41g Customer Drawing fx,gx,hx,ix 6 2286123-3 5 2286123-2 2 2286123-1 PLATING PART NO A TE Connectivity PRODUCT SPEC 1 $ 0' BACKPLANE CONNECTOR PIN SIZE RIGHT-ANGLE PLUG ASSEMBLY, 7 ROW HALF MODULE 8, 20.3mm, MULTIGIG RT2-R, DAUGHTERCARD CONNECTOR, VITA 78 CAGE CODE A1 00779 DRAWING NO RESTRICTED TO 2286123 SCALE 5:1 SHEET 1 OF - 1 REV A