2297801-1

TECC0019C7 Issue 8 15-Apr-21 Page 1 of 2 SPECIFICATION CONTROL DRAWING COMMUNICATION CABLE - FOUR PAIR 22AWG S/FTP CAT7 LSZH The complete requirements for procuring the wire described herein shall consist of this document and the issue in effect of the referenced specifications. This document takes precedence over documents referenced herein. PRODUCT DETAILS DESCRIPTION Application: 100BASE-T4, 100BASE-TX, 100VG-AnyLAN, 1000Base-T (1 Gb Ethernet), 1000Base-TX PHYSICAL CHARACTERISTICS Structure 22 AWG Conductor material Stranded Annealed Cooper (7/0.245) ± 0.02mm Insulation Conductor dimension(mm) Insulation material Insulation dimension(mm) Nom. Thickness (mm) 0.42 mm Twisting lay length ≤ 30 mm Cabling lay length ≤ 200 mm Filler Material N/A Binder Shield Material N/A Individual shield & material AL-Foil Cabling Stranded Tinned Copper Conductor Colour-coded PE Insulation LSFRZH Jacket Packaging: Per customer request 4 Pairs Conductor 75°C 61156-6,ISO/IEC 11801 IEC 60332-3-25 & IEC 60332-1-2 S/FTP Number of Pairs AWG 155Mbps ATM, 622Mbps ATM, 10Gb Ethernet Rated temperature: Reference Standard: Flammability Rating: Construction Foamed PE 1.65 ± 0.05 mm Primary overall shield & material Stranded Tinned Copper Outer Jacket CROSS SECTION Shield nom. Coverage 35% Min. Drainwire N/A Outer Jacket material LSFRZH Outer Jacket Thickness (mm) 1.0 mm Nom Overall Nom Dimension (mm) 9.90 ± 0.30 mm Outer Jacket Rip cord N/A Outer Jacket Colour Per Customer Request MECHANICAL CHARACTERISTICS Outer Jacket Operating Temp Range -20°C to +75°C Bulk Cable weight 94 kg/km 80 N Max. recommended pulling tension Min. bend radius (Install) Tensile Strength 8 x O.D. Elongation Ageing Condition ≧100% 100°C x 168hrs After Ageing Tensile Strength ≧70% of Unaging After Ageing Elongation ≧50% of Unaging No cracks -20°C/4hrs ≧9 Mpa Cold Bend ELECTRICAL CHARACTERISTICS 1 2 3 4 5 Jacket Braid AL-Foil Insulation Conductor Finished Cable Nom. Mutual Capacitance ≦ 5.6 nF/100m (@1kHz) Pair-Ground Unbalance ≦160 pF/100m Nom. Velocity of Propagation 65% Max. Delay Skew 25 ns/100m Max Conductor DC Resistance Resistance Unbalance 145 Ω/km (@ 20°C) Min. Insulation Resistance 5000 MΩ·km Max. Operating Voltage - UL 300 V 2% JACKET MARK "TE CONNECTIVITY - TECC0019C7 - 4PR 22AWG STRANDED CAT 7 CABLE - YEAR OF MANUFACTURE - BATCH NUMBER - " Tyco Electronics UK Ltd. Faraday Road Dorcan SWINDON SN3 5HH Tel: +44 (0)1793 528171 Fax: +44 (0)1793 572516 TE Connectivity is a trading name of Tyco Electronics UK Ltd, Which is registered in England and Wales, number 550926. Registered office: Faraday Road, Dorcan, Swindon, SN3 5HH Website : www.te.com This drawing and the information set forth hereon are the property of Tyco Electronics UK Ltd, and are to be held in trust and confidence. Publication, duplication, disclosure or use for any purpose not expressly authorised in writing by Tyco Electronics UK Ltd is prohibited. This specification sheet takes precedence over documents referenced herein. As Tyco Electronics UK Ltd. reserve the right to make changes in construction without notice please contact Tyco Electronics UK Ltd to ensure that this document is the latest issue. ©2021 Tyco Electronics UK Ltd, a TE Connectivity Ltd. company. All Rights Reserved. TECC0019C7 Issue 8 15-Apr-21 Page 2 of 2 SPECIFICATION CONTROL DRAWING COMMUNICATION CABLE - FOUR PAIR 22AWG S/FTP CAT7 LSZH The complete requirements for procuring the wire described herein shall consist of this document and the issue in effect of the referenced specifications. This document takes precedence over documents referenced herein. ELECTRICAL CHARACTERISTICS CONTINUED Frequency Impedance Upper Limit Impedance LowerLimit ATT RL NEXT PS NEXT FEXT PD (MHz) Zu (Ω) ZI (Ω) (Db/100m) (dB Min) (dB Min) (dB Min) (dB Min) (ns/100m Max) 1 - - 3.0 20.0 78.0 75.0 70.0 570.0 4 115.2 86.8 5.6 23.0 78.0 75.0 70.0 552.0 8 112.6 88.8 7.9 24.5 78.0 75.0 70.0 546.7 10 111.9 89.4 8.8 25.0 78.0 75.0 70.0 545.4 16 111.9 89.4 11.1 25.0 78.0 75.0 70.0 543.0 20 111.9 89.4 12.4 25.0 78.0 75.0 70.0 542.0 25 113.2 88.3 13.9 24.2 78.0 75.0 70.0 541.2 31.25 114.6 87.2 15.6 23.3 78.0 75.0 70.0 540.4 62.5 120.2 83.2 22.3 20.7 75.5 72.5 70.0 538.6 100 125.3 79.8 28.5 19.0 72.4 69.4 70.0 537.6 200 135.7 73.7 41.2 16.4 67.9 64.9 70.0 536.5 250 140.0 71.4 46.5 15.6 66.4 63.4 70.0 536.3 300 139.8 71.5 51.3 15.6 65.2 62.2 70.0 536.1 600 139.8 71.5 75.1 15.6 60.7 57.7 70.0 535.5 Remark : Cable that meet the requirements of the template are not required to be measured for return loss; alternately cables that meet the return loss requirements are not required to be measured for characteristic impedance. Approval Tyco Electronics UK Ltd. Faraday Road Dorcan SWINDON SN3 5HH Tel: +44 (0)1793 528171 Fax: +44 (0)1793 572516 Electronic sign off - no signatures will appear. TE Connectivity is a trading name of Tyco Electronics UK Ltd, Which is registered in England and Wales, number 550926. Registered office: Faraday Road, Dorcan, Swindon, SN3 5HH Website : www.te.com This drawing and the information set forth hereon are the property of Tyco Electronics UK Ltd, and are to be held in trust and confidence. Publication, duplication, disclosure or use for any purpose not expressly authorised in writing by Tyco Electronics UK Ltd is prohibited. This specification sheet takes precedence over documents referenced herein. As Tyco Electronics UK Ltd. reserve the right to make changes in construction without notice please contact Tyco Electronics UK Ltd to ensure that this document is the latest issue. ©2021 Tyco Electronics UK Ltd, a TE Connectivity Ltd. company. All Rights Reserved.