CODE 79 - HEAT SHRINK BOOT BACKSHELL
229M312-01-ET
SERIES
ORDER NUMBER (TABLE 1)
MATERIAL
NICKEL ALUMINIUM BRONZE
SHOT-BLAST FINISH
MODIFICATION CODE
REFER TO CH00-0250-004 2
NOTES:
1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED
BOOT TO A CONNECTOR.
2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS,
SEE CH00-0250-004.
3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE
IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-229M312-01).
4. KNURL INSIDE BOOT GROOVE MAY BE SUPPLIED AT MANUFACTURER'S OPTION.
5. BACKSHELL MATES TO BS9522-F0020 PATT 608 CONNECTORS.
DRAWN
W.RUST
DATE
CHECKED
15/10/2015
APPROVED K.SHEPPARD
15/10/2015
APPROVED
LTR
3
A
H.SMITH
3RD ANGLE
PROJECTION
NOT TO
SCALE
15/10/2015
15/10/2015
REVISIONS
DESCRIPTION
REVISED
REVISED PER ECO-15-013980
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
ANGULAR +/- 1°
DATE
17/01/13
APPROVED
15/10/2015
H.SMITH
TE CAGE CODE: 06090
POLAMCO/TE CAGE CODE: U5792
H.SMITH
TITLE:
HEAT SHRINK BOOT BACKSHELL
ASSY USED ON:
BS9522-F0020 PATT 608
TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING
AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD
INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION.
DRAWING NO:
DRAWING REV:
SHT
229M3XXSERIES
A
1
MEDIUM DIAMOND
KNURL
A-A
20,40
10,50
A
E
3,50
ØC
XXXX
ØD
A THREAD
ØB
PART MARK
HERE
A
TABLE 1
BASE
PART
NUMBER
229M308
229M310
229M312
229M314
229M316
229M318
229M320
229M322
229M324
DRAWN
W.RUST
DATE
15/10/2015
APPROVED K.SHEPPARD
15/10/2015
APPROVED
LTR
3
A
H.SMITH
3RD ANGLE
PROJECTION
NOT TO
SCALE
15/10/2015
CHECKED
15/10/2015
REVISIONS
DESCRIPTION
REVISED
REVISED PER ECO-15-013980
SHELL
SIZE
5
8
10
12
14
16
18
20
22
24
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
ANGULAR +/- 1°
DATE
17/01/13
APPROVED
15/10/2015
H.SMITH
TE CAGE CODE: 06090
POLAMCO/TE CAGE CODE: U5792
H.SMITH
A
THREAD
ØB
MAX
ØC
+0,00/-0,50
ØD
MIN
E
+0,20/-0,00
7/16-28UNEF
9/16-24UNEF
11/16-24UNEF
13/16-20UNEF
15/16-20UNEF
1 1/16-18UNEF
1 3/16-18UNEF
1 5/16-18UNEF
1 7/16-18UNEF
19,3
21,3
24,3
29,2
30,8
33,8
38,5
38,5
42,5
13,0
16,0
19,0
22,0
25,0
29,2
32,2
35,2
38,2
8,0
11,0
14,3
17,0
20,0
23,0
26,0
29,0
32,0
1,12
1,12
1,12
1,12
1,12
1,12
1,75
1,75
1,75
TITLE:
HEAT SHRINK BOOT BACKSHELL
ASSY USED ON:
BS9522-F0020 PATT 608
TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING
AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD
INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION.
DRAWING NO:
DRAWING REV:
SHT
229M3XXSERIES
A
2
