OSFP CONNECTORS, CAGES
& CABLE ASSEMBLIES
TE Connectivity’s (TE) Octal Small Form Factor Pluggable (OSFP) connectors, cages and cable
assemblies address next-generation data center needs by supporting aggregate data rates up to
800 Gbps. These products are designed for both 28G NRZ and 56G PAM-4 protocols, with a
roadmap to 112G PAM-4 for future system upgrades. By utilizing integrated thermal heatsink technology
in the plug, OSFP products provide superior thermal performance and the signal integrity needed to
support 800G data rates. OSFP products offer high port density and can fit up to 36 ports of an 8
lane interface in a 1RU switch form factor, aligning with current and next-generation silicon roadmaps.
DATA AND DEVICES / OSFP CONNECTORS, CAGES & CABLE ASSEMBLIES
Key Features
•
Designed for up to 112G PAM-4 protocols
•
Designed for up to 15W thermal loads with low airflow
•
Capable of fitting up to 32 ports in a 1RU switch form factor
Key Benefits
•
Supports data rates up to 800 Gbps
•
Superior thermal and signal integrity performance
•
High port density
Applications
•
Switches
•
Servers
•
Routers
•
Storage equipment
Cage Assemblies
Connector
•
1 x 1 and 1 x 4 cages to support both
multi and single port applications
•
Low cost, stainless steel cage with tuned
airflow venting supports module cooling
and optimal system airflow
•
Traditional EMI containment at the bezel
and port opening
•
Flat rock PCB assembly
1x1 OSFP Cage Assembly
•
8-lane high density connector, footprint
and mating interface per OSFP MSA
spec
•
Proven .6mm pitch, 60 contacts total
•
Simple, low cost wafer design with 2
rows of contacts
•
Belly-to-belly capable via in-ground
alignment for low PCB cost and noise
•
Proven to 56G PAM-4, with roadmap to
112G PAM-4
1x4 OSFP Cage Assembly with Lightpipes
DATA AND DEVICES / OSFP CONNECTORS, CAGES & CABLE ASSEMBLIES
OSFP SMT Connector
PAGE 2
Part Number Information
Description
TE Part Number
1x1 OSFP Cage Assembly
2317416-1
1x4 OSFP Cage Assembly
2338495-1
OSFP SMT, PDNI Connector Assembly
2324869-1
OSFP SMT w/ Holdown, PDNI Connector Assembly
2324869-2
1x4 OSFP Cage w/ Open Back
2338495-3
1x4 OSFP Cage w/ Grid, 1 LP Per Port
1-2338495-1
1x4 OSFP Cage w/ Open Back, 1 LP Per Port
1-2338495-3
1x4 OSFP Cage w/ Grid, 2 LP Per Port
2-2338495-1
1x4 OSFP Cage w/ Open Back, 2 LP Per Port
2-2338495-3
1x4 OSFP Cage w/ Grid, 4 LP Per Port
4-2338495-1
1x4 OSFP Cage w/ Open Back, 4 LP Per Port
4-2338495-3
1x4 Lightpipe Assembly, 4 LP Per Port
2325080-4
1x4 Lightpipe Assembly, 2 LP Per Port
2325080-5
1x4 Lightpipe Assembly, 1 LP Per Port
2325080-6
1x4 Cage for Lightpipes
2338495-5
1x4 OSFP Cage w/ Grid, No EMI Springs
2315853-2
1x4 OSFP Cage w/ Open Back, No EMI Springs
2315853-4
Dust and EMI Plug
2317857-2
Dust Plug
2324698-1
112G Cages and Connectors
OSFP 112G cages and connectors will address next-generation data center needs by supporting
aggregate data rates up to 800 Gbps. Samples now available!
Description
TE Part Number
OSFP SMT Receptacle, PdNi, Au Flash, with Solder washer
2344064-1
OSFP SMT Receptacle, PdNi, Au Flash
2344064-2
OSFP SMT Receptacle, Au, with Solder washer
2344064-3
OSFP SMT Receptacle, Au
2344064-4
DATA AND DEVICES / OSFP CONNECTORS, CAGES & CABLE ASSEMBLIES
PAGE 3
Cable Assemblies
•
Module designed to be in the range of MSA
specification impedance
•
Allows airflow through the module shell to
cool downstream electronics in front-to-back
airflow systems, or exhaust for back-to-front
airflow
OSFP to OSFP
OSFP to 4 QSFP
Product Offering
•
OSFP to OSFP straight cables
•
OSFP to 2 or 4 QSFP56 breakout cables
•
OSFP to 8 SFP56 breakout cables
•
Other custom cable configurations will be
considered
•
Up to 26 AWG supported in the OSFP form
factor
•
Maximum cable reach of 3 meters meets
IEEE 802.3cd SDD21 requirement of
- 17.16 dB at 13.28 GHz
OSFP to 2 QSFP
OSFP to 8 SFP
Description
TE Part Number
OSFP - OSFP, 1 meter, 30AWG
2821906-5
OSFP - OSFP, 2 meter, 30AWG
2821906-7
OSFP - OSFP, 3 meter, 26AWG
2336065-3
OSFP - 2 QSFP, 1 meter, 30AWG
2324441-2
OSFP - 2 QSFP, 2 meter, 30AWG
2324441-4
OSFP - 2 QSFP, 3 meter, 26AWG
2335033-3
OSFP - 4 QSFP, 1 meter, 30AWG
2324442-2
OSFP - 4 QSFP, 2 meter, 30AWG
2324442-4
OSFP - 4 QSFP, 3 meter, 26AWG
2336063-3
OSFP - 8 SFP, 1 meter, 30AWG
2324443-2
OSFP - 8 SFP, 2 meter, 30AWG
2324443-4
OSFP - 8 SFP, 3 meter, 26AWG
2336064-3
DATA AND DEVICES / OSFP CONNECTORS, CAGES & CABLE ASSEMBLIES
PAGE 4
TE Technical Support Center
USA: 1.800.522.6752
Canada:
1 .905.475.6222
Mexico: 52.0.55.1106.0800
Latin/S. America: 54.0.11.4733.2200
Germany: 49.0.6251.133.1999
UK:
44.0.800.267666
France:
33.0.1.3420.8686
Netherlands: 31.0.73.6246.999
China:
86.0.400.820.6015
te.com
TE Connectivity, TE, TE Connectivity (logo) and Every Connection Counts are trademarks.All other logos, products and/or company names referred to herein might be
trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However,
TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as
set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential
damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each
such product for the specific application.
©2020 TE Connectivity Ltd. family of companies. All Rights Reserved.
1-1773956-6 09/20
DATA AND DEVICES / OSFP CONNECTORS, CAGES & CABLE ASSEMBLIES
