2337098-1

NanoRF Edge Launch Connector HIGH FREQUENCY CONTACTS SUPPORT HIGH PERFORMANCE UP TO 70 GHZ AEROSPACE, DEFENSE & MARINE / NanoRF Edge Launch Connector NanoRF Edge Launch Connector High frequency contacts support high performance up to 70 Ghz Description TE Connectivity (TE) has introduced the NanoRF Edge Launch connector. This product offers higher density and ruggedness over SMPM and SMPS edge launch options, and integrates the RF above an optical interconnect (with TE’s hybrid RF/optical modules). This product offers higher density and ruggedness over SMPM and SMPS edge launch options, and the technology can be leveraged to support SOSA aligned NanoRF connector modules. ROBUST AND SPACE SAVING APPLICATIONS •N  anoRF contact plug in module is terminated to the pc board, eliminating the need for cables • RF switches EASIER TERMINATION •B  ullet adapter takes up tolerance between edge launch termination and mating face and decreases the mating force required for stacked boards VERSATILE •C  ontact and module design is configurable for different sizes and contact counts INDUSTRY STANDARDS •S  upports VITA 67.3 interface for VPX industry standard implementations with SOSA compliance to support plug-in computing modules MARKETS SERVED • Military • Radar • Tuners • Software defined radios (RF devices for use in embedded computing systems) ELECTRICAL • F  requency range of 2 MHz to 40 GHz and 1.5:1 over the frequency range of 40 GHz to 85 GHz. • V  SWR of 1.4:1 over the frequency range of 2 MHz to 40 GHz and 1.5:1 over the frequency range of 40 GHz to 67 GHz. • Crosstalk: Frequency Range 3 GHz to 27 GHz and can achieve 100 db of crosstalk • I nsertion Loss: Not be greater than 0.12 * sqrt (f) dB, where f is in GHz. Maximum insertion loss at 20 GHz = 0.5367 dB. • Meets VITA 72 Shock and Vibration • Meets VITA 67 Environmental Requirement Test report to 108-163-006-1 Spec STANDARDS AND SPECIFICATIONS • E  IA-364: Electrical Connector/Socket Test Procedures Including Environmental Classifications • ANSI/VITA 67.3: Coaxial Interconnect on VPX, Spring-Loaded Contact on Backplane • A  NSI/VITA 48.1: Mechanical Specification for Microcomputers Using REDI Air Cooling • ANSI/VITA 46.0: VPX Baseline Standard • ANSI/VITA 65.0-2019: OpenVPX System Standard • ANSI/VITA 65.1-2019: OpenVPX System Standard – Profile Tables • M  IL-STD-810H: Environmental Engineering Considerations and Laboratory Tests, Jan 2019 AEROSPACE, DEFENSE & MARINE / NanoRF Edge Launch Connector PAGE 2 NanoRF Edge Launch Connector Eliminates Cables in the Plug-In Module Direct Board Termination Part Number Description • NanoRF contact on plug-in module directly terminated to the board 2332714-2 Daughtercard Assembly, Edge Launch, 67.3 (for separable solution w/bullet) • Upper rows (if needed) use cabling 2332709-2 Backplane Module, RF, 67.3C, Edge Launch With Bullet Adapter Part Number Description 2332714-2 Daughtercard Assembly, Edge Launch, 67.3 2337098-1 SMPS Edge Launch: 6 Position 2331630-1 Adapter, SMPS, Bullet 2332709-2 Backplane Module, RF, 67.3C, Edge Launch Part Number Description 2393429-1 Stainless Steel Kit 2393429-2 Aluminum Kit • Contacts fixed in module frame mounted to board • N  anoRF contacts tightly positioned in module • Bullets take up tolerance between edge launch terminations and NanoRF mating face • Ideal for stacked boards. Contact row heights in VITA 65.1 support stacked boards • This approach is implemented today with 67.3 SMPM NanoRF Edge Launch Kit • 6 bullets • SMPS solder bar • 6 SMPS to NanoRF adapters • Daughtercard module .1.120 [28.45] .496 [12.60] .470 [11.94] .718 [18.24] .496 [12.60] .548 [13.92] .470 [11.94] Module Bodies .120 [3.05] 2-56 UNC-2B Threaded Thru Hole 4 Places #0-80 UNF Captive Screw (Torx Drive) .652 .582 [16.56] [14.78] .380 [9.65] .344 [8.74] Spring Pin Scale 5:1 MATERIAL Module Bodies: Aluminum Alloy Screws and Spring Pins: Stainless Steel FINISH Module Bodies: Clear Chromate Conversion Coating Screws and Spring Pins: Passivated AEROSPACE, DEFENSE & MARINE / NanoRF Edge Launch Connector PAGE 3 NanoRF Edge Launch Connector .106 [2.69] .060 [1.51] 2x .197 [5.00] 2x Ø .064 [1.63] #0-80 UNF-2B Through 2x R.015 [0.38] 2x .756 [19.20] .845 [21.46] X .671 ± .003 [17.04 ± 0.071] X .756 [19.20] .666 ± .001 [16.92 ± 0.02] .275 [6.99] .110 [2.79] TYP 6x Ø .009 [0.23] 2x .004 [0.10] MATERIAL Body and Center Contact: Copper Alloy Insulator: PTFE FINISH Front Body: 50-90 µin. Gold Plate over Nickel Center Contact: 35-70 µin. Gold Plate over Nickel Rear Body: 3-15 µin. Gold Plate over Nickel 6x .058 [1.47] .207 [5.26] 2x .006 [0.15] Recommended PCB Cutout .157 [3.99] .009 [0.23] TYP Section X-X 1.120 [28.45] Module Bodies .959 [24.36] Scale 4:1 Guide Pins .483 [12.27] 0-80 UNF Captive Screw (Torx Drive) .243 [6.17] .500 [12.70] Contact Backplate .257 [6.53] Ø .064 ± .001 [1.63 ± 0.02] 2 Places MATERIAL Module Bodies and Backplates: Aluminum Alloy Guide Pin: Stainless Steel, per UNS S30300 Screws: 300 Series Stainless Steel Module Backplate Module Backplate Screw #1-72 UNF Flat Head (Phillips Drive) Scale 4:1 FINISH Module Bodies: Clear Chromate Conversion Coating Screws and Guide Pin: Passivated .200 [5.08] .200 [5.08] .400 [10.16] 2-56 UNC-2B Threaded Thru Hole 2 Places .400 [10.16] AEROSPACE, DEFENSE & MARINE / NanoRF Edge Launch Connector PAGE 4 NanoRF Edge Launch Connector .118 ± .001 [3.00 ± 0.02] MATERIAL Body and Center Contact: Copper Alloy Insulator: PTFE SMPS Female Interface Both Ends FINISH Body and Center Contact: Gold Plate over Nickel Ø .067 [1.70] Module Bodies .1.120 [28.45] .496 [12.60] .470 [11.94] .718 [18.24] .496 [12.60] #0-80 UNF Captive Screw (Torx Drive) .548 [13.92] .470 [11.94] .120 [3.05] 2-56 UNC-2B Threaded Thru Hole 4 Places Spring Pin .582 [14.78] .652 [16.56] .380 [9.65] Scale 5:1 .344 [8.74] MATERIAL Module Bodies: Aluminum Alloy Screws and Spring Pins: Stainless Steel Contact Bodies and Pin: Copper Alloy Insulator: PTFE FINISH Module Bodies: Clear Chromate Conversion Coating Screws and Spring Pins: Passivated Front Contact Body and Pin: 50-90 µin. Gold Plate over Nickel Rear Contact Body: 3-15 µin. Gold Plate over Nickel Compatibility is Standard NanoRF Backplane Modules NanoRF Backplane Contacts AEROSPACE, DEFENSE & MARINE / NanoRF Edge Launch Connector Mezzanine Connectors PAGE 5 CONNECT WITH US We make it easy to connect with our experts and are ready to provide all the support you need. Visit te.com/support to chat with a Product Information Specialist. QUALITY STARTS WITH THE RIGHT APPLICATION TOOLING Creating a quality crimp connection is essential to delivering high performance and reliability in extreme environments. From low to high volume wire processing, TE has you covered with a full range of application tooling and a global field service team. • View all application tooling • Connect with our experts to find the right tool for your application te.com/nanoRF-Edge AMP, AGASTAT, CII, DEUTSCH, DRI, HARTMAN, KILOVAC, MICRODOT, NANONICS, POLAMCO, Raychem, Rochester, SEACON, TE, TE Connectivity, and TE connectivity (logo) are trademarks owned or licensed by TE Connectivity. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2021 TE Connectivity  All Rights Reserved. 2385918-1  06/21    AEROSPACE, DEFENSE & MARINE / NanoRF Edge Launch Connector NanoRF Edge Launch Connector TE Connectivity Aerospace, Defense & Marine 2900 Fulling Mill Road Middletown, PA 17057