2343297-2

2388501-2 Automotive Connector Caps & Covers, Sealing Cover, Black / Orange, PA GF, 7 Position, -40 – 185 °F [-40 – 85 °C], Charging Inlets 2388501-2  ACTIVE Charging Inlets TE Internal #: 2388501-2 Automotive Connector Caps & Covers, Sealing Cover, Black / Orange, PA GF, 7 Position, -40 – 185 °F [-40 – 85 °C], Charging Inlets View on TE.com > Connectors > Automotive Connectors > Automotive Connector Accessories > Automotive Connector Caps & Covers Protection & Strain Relief Accessory Type: Sealing Cover Strain Relief: With Primary Product Color: Black, Orange Primary Product Material: PA GF Number of Positions: 7 Features Product Type Features Protection & Strain Relief Accessory Type Sealing Cover Sealable Yes Configuration Features Number of Positions 7 Body Features Primary Product Color Black, Orange Primary Product Material PA GF Mechanical Attachment Strain Relief With Usage Conditions Operating Temperature (Max) 85 °C[185 °F] Operating Temperature Range -40 – 85 °C[-40 – 185 °F] Industry Standards Degree of Protection  Packaging Features For support call+1 800 522 6752 IP67 01/02/2024 09:49PM | Page 1 2388501-2 Automotive Connector Caps & Covers, Sealing Cover, Black / Orange, PA GF, 7 Position, -40 – 185 °F [-40 – 85 °C], Charging Inlets Degree of Protection IP67 Packaging Features Packaging Quantity 1 Packaging Method Bag & Box Other Serviceable No Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Compliant with Exemptions EU ELV Directive 2000/53/EC Not Compliant China RoHS 2 Directive MIIT Order No 32, 2016 Restricted Materials Above Threshold EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JUNE 2023 (235) Candidate List Declared Against: JUNE 2022 (224) SVHC > Threshold: Pb (3.7% in COMPONENT PART) Article Safe Usage Statements: Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Recycle if possible and dispose of the article by following all applicable governmental regulations relevant to your geographic location. Halogen Content Not Yet Reviewed for halogen content Solder Process Capability Not reviewed for solder process capability Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulations, TE’s information on SVHC in articles for this part number is still based on the European Chemical Agency (ECHA) ‘Guidance on requirements for substances in articles’(Version: 2, April 2011), applying the 0.1% weight on weight concentration threshold at the finished product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once An Article Always An Article) stating that, in case of ‘complex object’, the threshold for a SVHC must be applied to both the product as a whole and simultaneously to each of the articles forming part of its composition. TE has evaluated this ruling based on the new ECHA “Guidance on requirements for substances in articles” (June 2017, version 4.0) and will be updating its statements accordingly. Compatible Parts  For support call+1 800 522 6752 01/02/2024 09:49PM | Page 2 2388501-2 Automotive Connector Caps & Covers, Sealing Cover, Black / Orange, PA GF, 7 Position, -40 – 185 °F [-40 – 85 °C], Charging Inlets TE Part # 1-967640-1 TE Part # 2151022-1 TE Part # 2276149-6 4POS MQS REC COD A OCEAN_2.0_APPLICATOR-S-055F070F Large Size Wire Applicator-LP Also in the Series Charging Inlets Automotive Connector Caps & Covers Automotive Connector Locks & (42) Position Assurance(5) Connector Backshells(4) Connector Seals & Cavity Plugs(14) Automotive Housings(21) Automotive Terminals(17) Crimp Wire Pins, Tabs & Ferrules(6) Electric, Hybrid & Fuel Cell Cable Assemblies(49) High Voltage Wire Processing Equipment(18) Other Automotive Connector Accessories(6) Customers Also Bought  TE Part #T4161120005-004 TE Part #2-1879456-3 TE Part #DT06-12SA-E008 TE Part #2-1623927-3 RPC-M12-MS-5CON-PUR-3.0SH TE 2000W 68R 5% Bracket PLG, 12P, GRY, N, XCAP, A CFR16 5% 1K0 For support call+1 800 522 6752 01/02/2024 09:49PM | Page 3 2388501-2 Automotive Connector Caps & Covers, Sealing Cover, Black / Orange, PA GF, 7 Position, -40 – 185 °F [-40 – 85 °C], Charging Inlets TE Part #DT12-L012-GKT TE Part #DT8P-L012-GKT TE Part #DT06-6S-E008 TE Part #2358664-5 GASKET DT 12 WY FLD RC GASKET, 8P, BLK, DT/DTM PLG, 6P, GRY, N, XCAP FLAP, ASSY, INLET COMBO 1, LEFT, LED TE Part #2358664-6 TE Part #2358664-7 FLAP, ASSY, INLET COMBO 2, LEFT, FLAP, ASSY, INLET COMBO 1, RIGHT, LED LED Documents Product Drawings CHARGE INLET, COMBO 1, LED, 90 DEGREE English CAD Files 3D PDF 3D Customer View Model ENG_CVM_CVM_2388501-2_A.2d_dxf.zip English Customer View Model ENG_CVM_CVM_2388501-2_A.3d_igs.zip English Customer View Model ENG_CVM_CVM_2388501-2_A.3d_stp.zip English By downloading the CAD file I accept and agree to the Terms and Conditions of use. Product Specifications Application Specification English  For support call+1 800 522 6752 01/02/2024 09:49PM | Page 4