2380840-2

2380840-2 Hand Crimping Tools, Commercial Crimp Tooling, Removable/Interchangeable, TE Product Specification (114-), SDE Crimp Die Set 2380840-2  ACTIVE TE Internal #: 2380840-2 Hand Crimping Tools, Commercial Crimp Tooling, Removable /Interchangeable, TE Product Specification (114-), SDE Crimp Die Set View on TE.com > Application Tooling > Hand Crimping Tools Tool Grade: Commercial Crimp Tooling Die Sets Type: Removable/Interchangeable Specification Type: TE Product Specification (114-) TE Certification: Cannot be Certified Tooling Type: SDE Crimp Die Set Features Other Crimp Form-Wire Barrel Type Open Barrel - F Crimp Tool Grade Commercial Crimp Tooling Die Sets Type Removable/Interchangeable Specification Type TE Product Specification (114-) TE Certification Cannot be Certified Tooling Type SDE Crimp Die Set Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Out of Scope EU ELV Directive 2000/53/EC Out of Scope China RoHS 2 Directive MIIT Order No 32, 2016 Restricted Materials Above Threshold EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JUNE 2023 (235) Not Yet Reviewed Halogen Content  For support call+1 800 522 6752 Not Low Halogen - contains Br or Cl > 900 ppm. 01/02/2024 09:42PM | Page 1 2380840-2 Hand Crimping Tools, Commercial Crimp Tooling, Removable/Interchangeable, TE Product Specification (114-), SDE Crimp Die Set Halogen Content Not Low Halogen - contains Br or Cl > 900 ppm. Solder Process Capability Not applicable for solder process capability Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked. Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulation, the information TE provides on SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) ‘Guidance on requirements for substances in articles’ posted at this URL: https://echa.europa.eu/guidance-documents/guidance-onreach Compatible Parts TE Part # CAT-N53-MT050 TE Part # CAT-M4595-T273 TE Part # 2362810-1 TE Part # 2380840-1 MCON 0.50 Terminals MCON Receptacle and Tab SDE CRIMP HAND TOOL FRAME W /O DIES SDE F MCON 050 0.13-0.22mm2 ASSY TE Part # 1-2177908-2 MCON 0.5 CB, CONTACT Documents Datasheets & Catalog Pages Bottoming Dies English SDE Crimp Commercial Tool System English Instruction Sheets Instruction Sheet (U.S.) English  For support call+1 800 522 6752 01/02/2024 09:42PM | Page 2