2388426-1

LUMAWISE MOTION TE Connectivity (TE)’s LUMAWISE Motion is a motion sensor designed for street lighting. Enabling energy savings from dimming or even turning off a luminaire, while still being able to react to motion and bring a luminaire to full brightness for safety and security reasons. LUMAWISE Motion will fit into the Zhaga-D4i ecosystem, which is the new standard for smart cities. Working as a standalone control device or in combination with Zhaga-D4i photocell or communication node for greater levels of controls. The sensor is a pluggable device, with the standard Zhaga book 18 interface for an easy upgrade. BENEFITS • Interoperability guaranteed from the Zhaga-D4i logo and certification • Detected motion will cause a dimmed luminaire to brighten allowing for energy savings while still having the safety and security of a well-lit area Control Device: Type A Typically a photocell or communication node Certification: Zhaga-D4i Power Budget: Larger budget from AUX PSU CMS • Compact design to keep the aesthetics of modern designed luminaires Central Management System Cloud control: Balance energy savings and social needs Zhaga Interface - Book 18 24Vdc DA-/GND DA+ Live Built-In AUX 24V LED Driver Neutral Luminaire Certification: Zhaga-D4i • One handed easy under luminaire connection allows for an installer to work below the luminaire APPLICATIONS Driver D4i Driver: Added Functionality Communication Bus Certification: D4i • Street lighting Simplified wiring and architecture Communication Bus: D4i Zhaga Interface - Book 18 • Park, recreational and walkway lighting • Station lighting Control Device: Type B Typically a sensor input device, like a motion sensor Certification: Zhaga-D4i Power Budget: Lower budget from AUX or DALI Bus • High bay lighting L N Zhaga-D4i joint certified Zhaga-D4i certification mark INDUSTRIAL / LUMAWISE MOTION LUMAWISE Motion FEATURES MECHANICAL • 30mx6m rectangular detection zone (@5m) • Height: 42.0mm • On: 35lux, Off: 18lux (other values available upon request) • Diameter: 79.7mm • No motion: 20% brightness, motion: 100% brightness (other values available upon request) MATERIALS • On time: 2 minutes (other values available upon request) • Dome: HDPE and Polycarbonate • Base: PBT • Tested on poles from 5m to 8m high • Detects pedestrians, runners, and cyclists ELECTRICAL • Masks available for self-defined detection zone • 6-8mA average power consumption, 25mA on startup • Lighting control of the driver from the D4i communication protocol • Powered from the DALI bus • Zhaga book 18 interface (4 position connection) STANDARDS • Zhaga-D4i Type B device, with application controller • Zhaga Book 18 Editions 1, 2 and 3 • Polarity insensitive DALI input • DiiA: Parts 351 • IP66, IP68 and IK07 • IEC 62386: Part 303, 101 and 103 • -40°C to 65°C operating temperature range • CE Marked • -40°C to 32°C functional detection temperature range • UL773 • At ambient temperatures greater than 32°C, light output will be switched to 50% brightness • IEC 61347-1 • Rolling calibration sequence to filter out reflected light from the luminaire • Pin out: 1: N/C 2: DALI-/GND 3: DALI+ 4: N/C • IEC 61347-2-11 SPECIFICATIONS • Application Spec: 114-160247 • Product Spec: 108-160457 PART NUMBER LIST Product Images Part Number 2388426-1 2388426-2* 2388426-3* 2396399-1 Description LUMAWISE Motion Sensor Assembly: Inverse switching ratio LUMAWISE Motion Sensor Assembly: Conventional switching ratio LUMAWISE Motion Sensor Assembly: 1:1 switching ratio LUMAWISE Motion Sensor Mask *Part numbers only available upon request INDUSTRIAL / LUMAWISE MOTION PAGE 2 LUMAWISE Motion LUMAWISE Motion Zhaga-D4i Certified Control Device: Type A Typically a photocell or communication node Certification: Zhaga-D4i Power Budget: Larger budget from AUX PSU CMS Central Management System Cloud control: Balance energy savings and social needs Zhaga Interface - Book 18 24Vdc DA-/GND DA+ Live Built-In AUX 24V LED Driver Neutral Luminaire Certification: Zhaga-D4i Driver D4i Driver: Added Functionality Certification: D4i Communication Bus Simplified wiring and architecture Communication Bus: D4i Zhaga Interface - Book 18 Control Device: Type B Typically a sensor input device, like a motion sensor Certification: Zhaga-D4i Power Budget: Lower budget from AUX or DALI Bus L N Zhaga-D4i joint certification mark Zhaga-D4i certified INDUSTRIAL / LUMAWISE MOTION PAGE 3 LUMAWISE Motion Market Leading Detection Zone TYPICAL DETECTION DIAGRAM AT 5M MOUNTING HEIGHT Only one half of detection zone shown TYPICAL DETECTION DIAGRAM AT 8M MOUNTING HEIGHT Only one half of detection zone shown INDUSTRIAL / LUMAWISE MOTION PAGE 4 LUMAWISE Motion Mechanical footprint te.com © 2022 TE Connectivity. All Rights Reserved. LUMAWISE, TE Connectivity, TE connectivity (logo) and Every Connection Counts are trademarks owned or licensed by TE Connectivity. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. 09/22   AK INDUSTRIAL / LUMAWISE MOTION