2405081-3

AHV SERIES THREE PHASE HIGH PERFORMANCE EMI FILTER Single stage delta configuration INTRODUCTION Chassis for motor drive applications requiring compact space and convenient installation with superior performance at significant interference levels APPLICATIONS • • • • • IT power distribution network Three phase drives Renewable energy systems Process automation equipments Energy conversion devices FEATURES • • • • Superior performance Compact Low leakage current Chassis mounting APPROVALS & COMPLIANCE • UL recognized as per UL 60939-3 and CSA22.2 No 8 TYPICAL CIRCUIT DIAGRAM Specifications Electrical Characteristics Agency Rated Voltage Current Ratings Operating Frequency Line to Line: 760/750VAC 6A to 1000A @ 40°C 50/60Hz Line to Ground: 3535VDC for 1 Minute High Potential Test Voltage Line to Line: 3268VDC for 1 Minute Overload Capability 135% of Rated current for 15 minutes AHV Series Single stage delta configuration Functional Characteristics Operating Temperature Range -25°C to +85°C Climatic Category 25/85/21 Quick Connect (6A to 100A) Termination Bolt & Nut (125A to 250A) Busbar (320A to 1000A) Flammability Corresponding to UL 94 V-0 Reference Standards Design Corresponding to UL 60939-3 and CSA 22.2 No 8 Selection Table – Standard Version TE Ordering Number Catalog Number Rated Current @40°C Rated Voltage @40°C Leakage Current (mA) Weight (Kgs) Termination Type 2405081-1 6 AHV S FP 6A 760 2mA 3 1 2405081-2 10 AHV S FP 10A 760 2mA 3 1 2405081-3 16 AHV S FP 16A 760 2mA 3 1 2405081-4 20 AHV S FP 20A 760 2mA 3 1 2405081-5 25 AHV S FP 25A 760 2mA 4 1 2405081-6 30 AHV S FP 30A 760 2mA 4 1 2405081-7 40 AHV S FP 40A 760 2mA 4 1 2405081-8 50 AHV S FP 50A 760 2.5mA 5 1 2405081-9 60 AHV S FP 60A 760 3mA 5 1 1-2405081-0 75 AHV S FP 75A 760 3mA 5 1 1-2405081-1 80 AHV S FP 80A 760 3mA 7 1 1-2405081-2 90 AHV S FP 90A 760 3mA 7 2 1-2405081-3 100 AHV S FP 100A 760 3mA 7 2 1-2405081-4 125 AHV S FP 125A 760 3mA 10 M10 STUD 1-2405081-5 150 AHV S FP 150A 760 3mA 10 M12 STUD 1-2405081-6 180 AHV S FP 180A 760 3mA 10 M12 STUD INDUSTRIAL / AHV SERIES 2 AHV Series Single stage delta configuration TE Ordering Number Catalog Number Rated Current @40°C Rated Voltage @40°C Leakage Current (mA) Weight (Kgs) Termination Type 1-2405081-7 250 AHV S FP 250A 760 3mA 10 M12 STUD 1-2405081-8 300 AHV S FP 300A 760 3mA 15 BUSBAR 6 x 25mm 1-2405081-9 400 AHV S FP 400A 760 3mA 15 BUSBAR 6 x 25mm 2-2405081-0 500 AHV S FP 500A 760 3mA 18 BUSBAR 10 x 25mm 2-2405081-1 600 AHV S FP 600A 760 3mA 18 BUSBAR 10 x 25mm 2-2405081-2 700 AHV S FP 700A 760 3mA 23 BUSBAR 10 x 40mm 2-2405081-3 800 AHV S FP 800A 760 3mA 23 BUSBAR 10 x 40mm 2-2405081-4 1000 AHV S FP 1000A 760 3mA 23 BUSBAR 10 x 40mm Termination Type: Connectors Cross Section Range; Flexible (mm2) 1 2 3 4 0.5 - 16 10 - 25 16 - 50 35 - 95 Insertion Loss (Typical) – Measured in Closed 50Ω System Common Mode 50Ω/50Ω Current Rating Frequency in MHz 0.01 0.05 0.15 0.5 1 3 5 10 30 6A 10.2 24.8 35.5 46.7 49.6 56.3 64.4 44.4 26.3 10A 7 21 31 40 45 51 62 42 25 16A 4 13 24 36 40 44 57 36 20 20A 0.621 10.9 21.3 34.3 38.5 48.2 71.3 43.2 26.5 25A 0.94 11.8 22 33.3 37 42.3 50.1 36.9 18 30A 0.92 10.5 22 32 36 43 48 35 22 40A 0.91 11.7 21.4 29.9 34.4 43.1 57.1 35.3 20.7 50A 0.75 7.5 18 28 31 40 54 37 20 60A 0.45 6 18 30 31 40 58 33 18 75A 0.069 5.91 16.2 27.5 29.7 39.6 72.1 32.6 23.3 INDUSTRIAL / AHV SERIES 3 AHV Series Single stage delta configuration Common Mode 50Ω/50Ω Current Rating Frequency in MHz 0.01 0.05 0.15 0.5 1 3 5 10 30 80A 0.058 2.1 9.8 21 20 32 58 27 18 90A 0.04 1.2 6.2 15 17 28 50 25 16 100A 0.033 0.298 3.68 13 15.6 26.1 47 23.5 14.3 125A 0.03 0.19 2.5 10 14 25 45 20 13 150A 0.02 0.5 3 11 14 25 42 18 12 180A 0.08 0.5 3.5 12 14 22 37 20 13 250A 0.104 0.52 4.83 15.2 18.4 30.5 40.1 22.6 14 300A 0.0165 0.0311 0.506 6.19 9.21 21.7 31.6 16.4 8.27 400A 0.0165 0.0311 0.506 6.19 9.21 21.7 31.6 16.4 8.27 500A 0.013 0.115 0.731 3.67 8.12 22.9 26.9 14.8 6.1 600A 0.013 0.115 0.731 3.67 8.12 22.9 26.9 14.8 6.1 700A 0.0051 0.0184 0.351 4.24 7.62 21.6 27.7 15.1 6.4 800A 0.0051 0.0184 0.351 4.24 7.62 21.6 27.7 15.1 6.4 1000A 0.0051 0.0184 0.351 4.24 7.62 21.6 27.7 15.1 6.4 Differential Mode 50Ω/50Ω Current Rating Frequency in MHz 0.01 0.05 0.15 0.5 1 3 5 10 30 6A 16.2 38.5 82.1 87.6 98.6 81.3 79.6 78.6 71.5 10A 18 35 75 82 86 78 75 70 67 16A 15 24 63 74 75 62 59 53 45 20A 17.2 21.8 57 71.3 73.6 76.4 73.2 70.3 58.6 25A 17.2 19.5 54 63.5 64.9 64.7 61.9 59.2 44.4 30A 18 25 50 60 63 62 57 55 45 40A 17.23 27.8 43.5 60.1 61.5 61.9 61.6 60.9 59.8 50A 20 25 45 65 67 62 55 50 35 60A 22 28 45 62 65 54 48 42 31 75A 25.4 33.8 64.3 72.4 64.4 53.4 50.7 47.9 37.8 80A 25 34 60 68 58 50 48 42 32 90A 25 34 52 60 50 42 40 38 30 INDUSTRIAL / AHV SERIES 4 AHV Series Single stage delta configuration Differential Mode 50Ω/50Ω Current Rating Frequency in MHz 0.01 0.05 0.15 0.5 1 3 5 10 30 100A 25.6 38.8 46.2 55 47.6 39.3 36.9 34.3 26.4 125A 22 36 42 50 42 35 36 30 22 150A 23 36 45 51 40 31 33 32 20 180A 22 35 48 53 45 32 30 29 20 250A 25.6 38 51.5 55.8 48.6 40.4 37.8 35 24.4 300A 25.5 38.8 49.5 46.2 38.7 30.3 27.6 24.8 17.1 400A 25.5 38.8 49.5 46.2 38.7 30.3 27.6 24.8 17.1 500A 25.5 39.1 51.6 43.1 36.2 28 25.3 22.6 15.1 600A 25.5 39.1 51.6 43.1 36.2 28 25.3 22.6 15.1 700A 25.5 39.4 58.4 45.3 37.8 29.5 26.9 24.2 17.3 800A 25.5 39.4 58.4 45.3 37.8 29.5 26.9 24.2 17.3 1000A 25.5 39.4 58.4 45.3 37.8 29.5 26.9 24.2 17.3 Mechanical Diagram 6A to 40A INDUSTRIAL / AHV SERIES 50A to 80A 5 AHV Series Single stage delta configuration 90A 100A 125A 150A to 250A 300A and 400A 500A and 600A INDUSTRIAL / AHV SERIES 6 700A to 1000A HOW TO ORDER Part Number 10 - AHV - S FP Current Rating 10 Series Type AHV Filter Stage S Single Fully Potted FP te.com ©2022 TE Connectivity. All Rights Reserved. TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. 08/22   TJ INDUSTRIAL / AHV SERIES