250APS12L

THIS DRAWING IS A CONTROLLED DOCUMENT. LOC REVISIONS DIST - - P LTR DESCRIPTION A B REVISED PER ECR-14-007825 ECO-15-015144: ADD UL. SAFETY ORGANIZATIONS 26OCT2015 STORAGE TEMPERATURE: HUMIDITY: -40°C TO +85°C 21 DAYS @ 40°C 95% RH. TEST SPECIFICATIONS 42.7 µH CAPACITANCE AT 1KHz, 0.25 VAC MAX., 25°C±1°C LINE TO GROUND, NOMINAL: 3.1 µF LINE TO LINE, NOMINAL: 7.0 µF OPERATING SPECIFICATIONS 20 250 A, 520VAC LINE FREQUENCY: 50-60 Hz NOMINAL LEAKAGE CURRENT: MAXIMUM LEAKAGE CURRENT: 15 mA 270mA DISCHARGE RESISTOR L/G AND L/L I.R. 1000 kOhm / 1000 kOhm IR (NO DISCHARGE RESISTOR) 20°C, 50% RH AND 100VDC, MIN: 6000 M ^ LINE CURRENT/VOLTAGE: OPERATING AMBIENT TEMPERATURE RANGE @ RATED CURRENT, I : RECOMMENDED RECEIVING INSPECTION HIPOT @ 277V, 50HZ LINE TO GROUND FOR 1 MINUTE: 2200 VDC LINE TO LINE FOR 1 MINUTE: 2160 VDC -10°C TO +50°C IN AN AMBIENT, T , HIGHER THAN 50°C, THE MAXIMUM OPERATING CURRENT, I , IS AS FOLLOWS: I I = IC FILTER APPROVAL: 100 - T O THE BEST WAY TO SELECT AND QUALIFY A FILTER IS FOR YOUR ENGINEERING TO TEST THE UNIT IN YOUR EQUIPMENT. Q R 50 90.00 LOAD 70.00 24 160.0 47.0 190.0 40 208 33 10.0 12.00 210.0 5.00 LINE ALL RIGHTS RESERVED. EC EC RS EC 30MAY2014 INDUCTANCE,NOMINAL: 9.00 * 20.00 123 BY - 33 25.0 * DO NOT LOOSEN INNER GROUND NUTS. TORQUE OUTER GROUND NUTS TO: 25-30 NM [220-260 IN-LB] 20 TYPICAL INSERTION LOSS COPYRIGHT COMMON MODE 50/50 ^ ;DIFFERENTIAL MODE 100/100 ^ C THIS DRAWING IS UNPUBLISHED. APVD RELIABILITY SPECIFICATIONS THIS FILTER HAS BEEN FORMALLY RECOGNIZED, CERTIFIED OR APPROVED BY THE LISTED AGENCY. THEREFORE, ALL TEST/REQUIREMENTS SPECIFIED IN THE LATEST REVISION OF THE FOLLOWING AGENCY STANDARDS HAVE BEEN MET: UL RELEASED FOR PUBLICATION DWN DATE DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: 2.0 1.0 0.13 0.013 0.0001 19DEC2013 CHK 19DEC2013 APVD 19DEC2013 RS mm 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES DWN EC EC PRODUCT SPEC - - Customer Drawing 0.05 0.15 0.5 1.0 3.0 5.0 CM 13 37 65 71 66 57 DM 27 41 45 70 59 46 FINISH 10 30 53 51 27 41 34 23 TE Connectivity NAME SIZE - 0.01 - APPLICATION SPEC WEIGHT 1469-35 (3/11) MATERIAL MHz CAGE CODE A4 00779 250APS12L 3-PHASE DELTA FILTER DRAWING NO 4-1609114-4 SCALE 1:1 SHEET RESTRICTED TO 1 OF - 1 REV B