ANTI-ROTATIONAL
SET SCREW
6
CODE 24 - HEAT SHRINK BOOT BACKSHELL
203M916-19B-D
SERIES
SHELL SIZE (TABLE 1)
MATERIAL
REFER TO CH00-0250-004
FINISH
REFER TO CH00-0250-004
MODIFICATION CODE
REFER TO CH00-0250-004 2
NOTES:
1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED
BOOT TO A CONNECTOR.
2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS,
SEE CH00-0250-004.
3. BACKSHELL TO BE PERMANETLY MARKED/BAGGED AND LABELLED WITH CODE
IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-203M912-19B).
4. KNURL INSIDE BOOT GROOVE MAY BE SUPPLIED AT MANUFACTURER'S OPTION.
5. BACKSHELL MATES TO MIL-C-26482 SERIES I, CLASS E, F, MS3110, MS3111 AND MS3116 CONNECTORS.
6. ANTI-ROTATIONAL SET SCREW, THREE #4-40 THREADED HOLES 120° APART, SINGLE
MATING SET SCREW SUPPLIED.
DRAWN
W.RUST
DATE
CHECKED
08/09/2015
APPROVED K.SHEPPARD
08/09/2015
APPROVED
H.SMITH
3RD ANGLE
PROJECTION
NOT TO
SCALE
08/09/2015
01/10/2015
REVISIONS
LTR
DESCRIPTION
J
REVISED PER ECO-15-002749
K
REVISED PER ECO-15-013980
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
ANGULAR +/- 1°
DA TE
20/02/15
APPROVED
H.SMITH
01/10/2015
H.SMITH
TE CAGE CODE: 06090
POLAMCO/TE CAGE CODE: U5792
TITLE:
HEAT SHRINK BOOT BACKSHELL
ASSY USED ON:
MIL-DTL-26482 SERIES I
TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING
AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD
INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION.
DRAWING NO:
DRAWING REV:
SHT
203M9XX
K
1
ANTI-ROTATIONAL
SET SCREW
MEDIUM DIAMOND
KNURL
28,00
10,50
SILICONE O-RING
ØY
XXXX
ØZ
A THREAD
ØB
X
3,50
PART MARK
HERE
TABLE 1
BASE PART
NUMBER
203M908
203M910
203M912
203M914
203M916
203M918
203M920
203M922
203M924
DRAWN
W.RUST
DATE
08/09/2015
APPROVED K.SHEPPARD
08/09/2015
APPROVED
H.SMITH
3RD ANGLE
PROJECTION
NOT TO
SCALE
08/09/2015
CHECKED
01/10/2015
REVISIONS
LTR
DESCRIPTION
J
REVISED PER ECO-15-002749
K
REVISED PER ECO-15-013980
SHELL SIZE
5
08
10
12
14
16
18
20
22
24
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
ANGULAR +/- 1°
DA TE
20/02/15
APPROVED
H.SMITH
01/10/2015
H.SMITH
TE CAGE CODE: 06090
POLAMCO/TE CAGE CODE: U5792
A
THREAD
7/16-28UNEF
9/16-24UNEF
11/16-24UNEF
13/16-20UNEF
15/16-20UNEF
1 1/16-18UNEF
1 3/16-18UNEF
1 5/16-18UNEF
1 7/16-18UNEF
4 DRAIN HOLES
WHEN 'D' MODIFICATION
IS SPECIFIED
ØB
MAX
18,05
21,55
24,65
27,65
31,05
34,35
37,55
40,55
43,55
X
+0,20/-0,00
1,12
1,12
1,12
1,12
1,12
1,12
1,75
1,75
1,75
ØZ
7,15
9,80
13,50
15,90
19,00
21,40
24,60
27,80
31,00
ØY
MAX
13,50
15,50
19,50
21,50
24,50
26,50
31,00
34,50
36,50
TITLE:
HEAT SHRINK BOOT BACKSHELL
ASSY USED ON:
MIL-DTL-26482 SERIES I
TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING
AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD
INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION.
DRAWING NO:
DRAWING REV:
SHT
203M9XX
K
2
