274307N001

CUSTOMER DRAWING Product Name D-436-0184 D-436-0185 D-436-0186 (Note B) I.D. of Liner Received Recovered Min Max 2.15 (0.085) 4.8 (0.188) 3.05 (0.120) 0.0 (0.00) 0.0 (0.00) 0.0 (0.00) Insulation Sleeve Recovered Recovered Wall I.D. Min Max 1.37 0.30 (0.055) (0.012) 2.41 0.33 (0.095) (0.013) 1.37 0.30 (0.055) (0.012) Weight Grams Max 0.3 0.5 0.4 Product Dimensions L E max min 21.3 (0.840) 21.7 (0.855) 21.3 (0.8.40) 13.0 (0.510) 13.0 (0.510) 15.25 (0.600) Note A: This end of sleeve may have a 1.20mm (0.50) opening as received. Upon heating, sealing material will flow sufficiently to close end. Note B: D-436-0186 has a blue color code dot MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SEALING LINER: Fluorocarbon-based thermoplastic. Color: clear. APPLICATION 1. These parts are designed for use with Raychem parallel crimp splices to make environment-resistant stub splices in two wires having a combined insulation diameter less than the “as received” I.D. of the sleeve, and rated for at least +125C. 2. Temperature range: -55C to +150C. Parts may be installed by convection heating. TITLE: SEALING CAPS Unless otherwise specified dimensions are in Raychem millimeters. Devices [Inches dimensions are shown in brackets] Tyco Electronics reserves the right to ANGLES: N/A TOLERANCES: amend this drawing at any time. Users 0.00 N/A should evaluate the suitability of the ROUGHNESS 0.0 N/A product for their application. IN MICRON 0 N/A ECO NUMBER: PREPARED BY: CAGE CODE: DOCUMENT NO.: D-436-0184/-0186 REV: DATE: D SCALE: UNGUYEN 06090 ECO-11-019172 © 1998-2011 Tyco Electronics Corporation. All rights reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. September 20, 2011 SIZE: NTS A SHEET: 1 of 1