27E893

General Purpose Accessories Potter & Brumfield Sockets & Accessories, KUP Relays n Sockets for 1 - 3 pole relays with .187” (4/75mm) quick connects or 4 pole relays with .110” (2.79mm) quick connects n Solder, PCB or screw terminal sockets n Hold down springs n Various mounting options Ordering Code for Sockets Approvals UL E59244, CSA LR15734 Product Poles Code Technical data of approved types on request. Technical Data Socket contact material Spring brass, tin plated Socket body material Solder, PCB and QC terminal models Nylon Screw terminal models - 3 pole Glass-filled polyester Screw terminal model - 4 pole Combination (PCB assembly) Maximum current Screw terminal model - 4 pole 10A All other models 15A 27E043 27E067 3 27E046 27E305 27E419 4 27E396 3 27E121 27E893 27E867 Terminal type solder .187 in (4.75) quick connect PCB .144 in (3.66) long PCB .184 in (4.67) long PCB .156 in (3.96) long .187 in (4.75) quick connect screw 4 Mounting Rating Part number hard mount 1393143-1 1393143-2 15A 1419106-4 3-1393143-2 4-1393143-0 snap-in 3-1393143-8 panel/rail DIN-rail panel-rail 1393143-5 2-1419106-5 2-1419106-2 10A All accessories must be ordered separately. Dimensions Hard Mount Sockets For Relays Through 3 Poles Sockets with .187” (4.75mm) quick connect, solder or printed circuit terminals are available for KUEP, KUGP, KUIP, KUL, KUMP and KUP relays, through 3 poles, with .187” (4.75mm) quick connect terminals. Also used with CL/CU time delay relays. 27E043–with solder eyelet terminals. 27E067–with .187” (4.75mm) quick connect terminals. Recommended chassis cutout for solder terminal socket .50 TYP. (12.7) 1.687 ± .010 (42.85 ± .25) .165 DIA. (4.19) 2 HOLES 1.370 (34.80) 1.50 (38.1) Caution: Printed circuit sockets are manufactured with "floating" (Loose) terminals. This permits them to align with holes in the circuit board and with the relay terminals. During the mounting and soldering of the socket, vertical float should be eliminated and the terminals seated on the board. (This may be accomplished by inserting a dummy relay in the socket.) Failure to eliminate float may cause fracture of the solder joint or separation of the copper conductor from the printed circuit board when a relay is inserted in the socket after soldering. .875 (22.23) 2.03 (51.56) .875 ± .010 (22.23 ± .25) 1.375 (34.93) 1.250 (31.75) .297 (7.54) .125 (3.18) .250 (6.35) 1.395 (35.43) .076 DIA. (1.93) 1.687 (42.85) 1.270 (32.26) .110 (2.79) 4 PLACES .260 (6.60) PC board layout for 3 pole PCB terminal socket .156 DIA. (3.96) 2 HOLES .875 (22.23) .437 (11.10) .218 (5.54) 1.687 (42.85) .626 (15.90) 1.076 (27.33) .090 TYP. (2.29) .208 (5.28) .180 TYP. (4.57) .156 TYP. (3.96) .328 (8.33) .34 MAX. (8.64) Recommended Chassis Thickness .031 (.79) to .062 (1.57) 468 10-2012, Rev. 1012 www.te.com © 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. General Purpose Accessories Potter & Brumfield Sockets & Accessories, KUP Relays (Continued) Dimensions Snap-in Socket For Relays Through 3 Poles Socket with with .187” (4.75mm) quick connect terminals is available for KUEP, KUGP, KUIP, KUL, KUMP and KUP relays, through 3 poles, with .187” (4.75mm) quick connect terminals. Also used with CL/CU time delay relays. 27E396–with .187” (4.75mm) quick connect terminals Recommended chassis cutout snap-in socket .396 (10.06) 1.260 (32.0 0) .020 (.51) 1.375 (34.93) .239 (6.07) PC board layout for 4 pole PCB terminal socket .50 TYP. (12.7) .165 ± .005 (4.19 ± .13) 2 HOLES 1.395 (35.43) R ecommended chassis thickness .031" (.79mm) to .062" (1.57mm). .328 (8.33) 1.250 (31.75) 2.03 (51.6) .875 (22.23) 1.50 (38.1) .206 (5.23) .076 DIA. TYP. (1.93) .060 TYP. (1.52) 1.687 (42.85) 1.370 (34.80) 1.270 (32.26) .065 TYP. (1.65) .281 (7.14) Hard mount sockets for relays with 4 poles Socket with printed circuit terminals is available for KUP relays, with 4 poles, with .110” (2.79mm) quick connect terminals. 27E043–with solder eyelet terminals. 27E419–with printed circuit terminals. .125 (3.18) .297 (7.54) .461 MAX. (11.71) .340 (8.64) .250 (6.35) .626 (15.90) .170 (4.32) .510 (12.95) 1.020 (25.91) Caution: Printed circuit sockets are manufactured with "floating" (Loose) terminals. This permits them to align with holes in the circuit board and with the relay terminals. During the mounting and soldering of the socket, vertical float should be eliminated and the terminals seated on the board. (This may be accomplished by inserting a dummy relay in the socket.) Failure to eliminate float may cause fracture of the solder joint or separation of the copper conductor from the printed circuit board when a relay is inserted in the socket after soldering. Screw terminal socket for relays through 3 poles 27E121 Offers screw termination for KUEP, KUGP, KUIP, KUL, KUMP and KUP relays, through 3 poles, with .187” (4.75mm) quick connect terminals. Also used with CL/CU time delay relays. This socket stacks on 1.700” (43.18mm) centers. When surface mounting, two #6-32 screws of suitable length are required. When track mounting, two 24A071 retainer clips (not shown) are required. 1.700 ± .010 (43.18 ± .25) 1.550 ± .010 (39.37 ± .25) .895 MAX. (22.73) 1.500 (38.10) .156 TYP. (3.96) 6 5 4 3 2 1 Screw terminal, DIN rail, snap-mount socket 27E893 Offers screw termination for KUEP, KUGP, KUIP, KUL, KUMP and KUP relays, through 3 poles, with .187” (4.75mm) quick connect terminals. Also used with CL/CU time delay relays. This socket is constructed with a spring-loaded latch which allows it to be quickly snapped onto or removed from a DIN or “top hat” style mounting track. No special tools or extra hardware is required for installation. 1.550 (39.37) 1.500 (38.10) 6 5 4 3 2 1 3.000 (76.20) 3.150 MAX. (80.01) B 9 1.450 MAX. (36.83) 1.900 MAX. (48.26) 8 B 7 #6-32 SCREWS & CAPTIVE WASHERS 10-2012, Rev. 1012 www.te.com © 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. company. .156 TYP. (3.96) A Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 1.703 (43.26) .317 TYP. (8.04) 9 A 8 7 1.030 (26.16) .390 (9.91) Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. 469 General Purpose Accessories Potter & Brumfield Sockets & Accessories, KUP Relays (Continued) Suggested track mounting Dimensions and terminal location Screw terminal socket for relays with 4 poles 27E867 Socket with screw terminals is available for KUP relays, with 4 poles, with .110” (2.79mm) quick connect terminals. 1 2 6 3 4 8 ++ ++ ++ ++ 9 A 10 7 11 B 12 + + + + + + + 1.750 ± .0 10 (44.45 ± .254) 2.750 ± .0 15 (69.96 ± .381) + 5 24A110 40G432 1.375 TRACK INSULATOR (34.93) 1.12L x .41W x .26H 24A071 (28.4 x 10.4 x 6.60) MOUNTING CLIP .250 ± .010 #6-32 SCREWS (6.35 ± .254) .150 MAX. (3.81) 2.250 ± .0 10 (57.15 ± .254) .156 DIA. (3.96) MTNG. HOLES 2 PLACES Suggested chassis mounting 27E867 PC BOARD .187 MIN. (4.75) .062 REF . (1.57) .230 ± .030 (5.84 ± .762) 3.50 ± .030 (88.9 ± .762) 27E867 PC BOARD .187 MIN. (4.75) CHASSIS .770 MAX. (19.56) SUGGESTED STANDOFF .375 (9.53) DIA. MIN; .625 (15.88) DIA. MAX. (CUSTOMER SUPPLIED) OR INSULATOR (40G432) Ordering Code for Accessories Product Code Description Part number 20C254 20C228 20C318 20C314 24A110 24A071 Snap-in relay hold down spring for use with all KUP sockets listed on these pages except 27E121 and 27E893. Relay hold down spring for use with hard mount KUP sockets. Is held in place by socket mounting hardware. Relay hold down spring for use with 27E893 DIN rail screw terminal socket Relay hold down clip for use with 27E121 screw terminal socket. 2 required per socket. Mounting track Steel mounting clip with #6-32 screw use with 27E166 on 24A110 track Plastic twist mounting clip use with 27E166 on 24A110 track Plastic insulator - use with 24A071 to make end clip for 24A110 track 3-1393159-9 1419111-3 4-1393159-8 4-1393159-6 1419111-6 1419111-5 24A072 40G432 5-1393159-4 9-1393159-5 All accessories must be ordered separately. Dimensions 24A110 DIN rail style mounting track 3.00 (76.2) .750 (19.05) 6.00 (152.4) Track and mounting accessories 36.00 ± .060 (914.4 ± 1.52) .187 (4.75) 1.375 ± .010 (34.93 ± .254) .405 ± .0 07 (10.29 ± .178) 24A110 mounting track is designed to accept snap-mount sockets, as well as other P&B screw terminal sockets. Track is made of lightweight, sturdy extruded aluminum and is shipped in three-foot (914cm) lengths with mounting holes on six-inch (152mm) centers. Track can be cut to shorter lengths or used end-to-end. 470 10-2012, Rev. 1012 www.te.com © 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 24A110 40G432 24A072 24A071 Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change.