2821750-2

TE Connectivity Technical Datasheet Sliver Cable Assemblies TABLE OF CONTENTS Introduction........................................................................................................................................................................................ 2 Description ..................................................................................................................................................................................... 2 Features and Benefits .................................................................................................................................................................... 2 Product Applications ...................................................................................................................................................................... 2 Industry Standards ......................................................................................................................................................................... 2 Technical Documents ..................................................................................................................................................................... 2 Part Numbers .................................................................................................................................................................................... 3 Table 1. Part Number Selection Guide ........................................................................................................................................... 3 Product Specifications ....................................................................................................................................................................... 3 Table 2. Material Specifications ...................................................................................................................................................... 3 Table 3. Electrical/Mechanical Specifications – Discrete Primary Pair Cable Assembly .................................................................. 4 Table 4. Electrical/Mechanical Specifications – Laminated Ribbon Cable Assembly ...................................................................... 4 Table 5. Environmental Specifications ............................................................................................................................................ 4 Table 6. Discrete Primary Pair Cable Specifications ....................................................................................................................... 5 Table 7. Laminated Ribbon Cable Specifications............................................................................................................................ 5 Pin Configurations ............................................................................................................................................................................. 6 Sliver 50 Position ........................................................................................................................................................................... 6 Sliver 74 Position ........................................................................................................................................................................... 7 Sliver Cable Assembly Mechanical Schematics ................................................................................................................................. 8 Sliver 50 Position Straight Cable Assembly .................................................................................................................................... 8 Sliver 74 Position Straight Cable Assembly .................................................................................................................................... 8 Sliver 50 Position Right Angle Cable Assembly .............................................................................................................................. 9 Sliver 74 Position Right Angle Cable Assembly .............................................................................................................................. 9 Signal Integrity Performance............................................................................................................................................................ 10 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Page 1 of 15 TE Connectivity Technical Datasheet Sliver Cable Assemblies INTRODUCTION Description TE Connectivity’s (TE) Sliver passive copper cable assembly is a robust and flexible cabling solution for internal interconnects. Due to the lower loss characteristics of copper cable, Sliver cabling reduces overall power requirements and extends the reach for high data rate signals inside networking equipment. TE's Sliver cable solution lowers overall costs by eliminating re-timers required to compensate for lossy PCB traces as well as more costly, lower loss PCB laminates. Sliver cable assemblies are offered in fine gage 33AWG low loss primary pairs and flat ribbon cable. The Sliver connector design is scalable in 4x increments and is available in straight and right angle plug configurations to mate with right angle and vertical board mount connectors. These connector styles offer a broad range of cable to board mating flexibility. Sliver cables are designed for applications in the data center, networking and telecommunications markets that use Ethernet, PCIe, InfiniBand, SAS and other signal protocols. Sliver cables and connectors are compatible with all types and speeds of microprocessors, and enable many interconnection configurations such as chip-to-chip, chip-to-front/rear panel, chip-to-backplane and a vertical card edge option. Features and Benefits • • • • • • • • • • Compatible with many different industry standards and protocols Supports speeds from 12G to 25Gbps per channel Enables less expensive PCB material and electronics, with higher channel performance Optimized construction to minimize insertion loss and cross talk Supports all types and speeds of microprocessors High density 0.6mm contact pitch Connector designed to be scalable from 4x to 20x Active press to release stainless steel latch 33AWG low loss 25GHz primary pairs or 12GHz flat ribbon cable RoHS compliant Product Applications • • • • • Switches, servers and routers Data Center networks Storage area networks High performance computing Telecommunication and wireless infrastructure Industry Standards • • • • • • 10G / 25G Ethernet PCIe Gen 3 / Gen 4 QPI - Intel QuickPath Interconnect SAS 3.0 / 4.0 InfiniBand QDR / FDR / EDR SATA Technical Documents Product Specification 108-32115 Sliver Cable Assembly 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Page 2 of 15 TE Connectivity Technical Datasheet Sliver Cable Assemblies PART NUMBERS Table 1. Part Number Selection Guide 50 position 74 position Part Description Data Rate Impedance Bulk Cable 0.5 Meter 1 Meter 0.5 Meter 1 Meter Straight Cable Plugs 25G 85 Discrete pairs 2821742-1 2821742-2 2821376-1 2821376-2 Right Angle Cable Plugs 25G 85 Discrete pairs 2821743-1 2821743-2 2821745-1 2821745-2 Straight-to-Right Angle Plugs 25G 85 Discrete pairs 2821744-1 2821744-2 2821746-1 2821746-2 Straight Cable Plugs 25G 100 Discrete pairs 2821750-1 2821750-2 2821756-1 2821756-2 Right Angle Cable Plugs 25G 100 Discrete pairs 2821751-1 2821751-2 2821757-1 2821757-2 Straight-to-Right Angle Plugs 25G 100 Discrete pairs 2821752-1 2821752-2 2821758-1 2821758-2 Straight Cable Plugs 12G 85 Ribbon 2820397-1 2820397-2 2820396-1 2820396-2 Right Angle Cable Plugs 12G 85 Ribbon 2820399-1 2820399-2 2821385-1 2821385-2 Straight-to-Right Angle Plugs 12G 85 Ribbon 2821638-1 2821638-2 2821639-1 2821639-2 Straight Cable Plugs 12G 100 Ribbon 2821747-1 2821747-2 2821753-1 2821753-2 Right Angle Cable Plugs 12G 100 Ribbon 2821748-1 2821748-2 2821754-1 2821754-2 Straight-to-Right Angle Plugs 12G 100 Ribbon 2821749-1 2821749-2 2821755-1 2821755-2 *Discrete pairs are optional for 12G platform Contact TE for customized lengths PRODUCT SPECIFICATIONS Table 2. Material Specifications Halogen Free low loss laminate PCB IPC Class 3 Contact 30µin min hard Gold plated contact pads Connector housing Polycarbonate (Lexan) Active latch Stainless steel Silver plated copper conductor Discrete Cable Fluoropolymer dielectric Metallic tape pair shield Polyester tape jacket Silver plated copper conductor Tinned copper drain wire Laminated Cable Al-mylar pair shield PET Outer Wrapping 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Page 3 of 15 TE Connectivity Technical Datasheet Sliver Cable Assemblies Table 3. Electrical/Mechanical Specifications – Discrete Primary Pair Cable Assembly Impedance Data Rate 100Ω 85Ω 25Gbps per channel 100 ohm = 7 ps/m Within Pair Skew 85 ohm = 10 ps/m Rated Voltage 30V Rated Current 0.5A per pin Durability 250 mating cycles 50 pos = 10N Mating Force 74 pos = 15N Table 4. Electrical/Mechanical Specifications – Laminated Ribbon Cable Assembly Impedance 100Ω 85Ω Data Rate 12Gbps per channel Within Pair Skew 10ps/m Rated Voltage 30V Rated Current 0.5A per pin Durability 250 mating cycles 50 pos = 10N Mating Force 74 pos = 15N Table 5. Environmental Specifications Storage Temperature -40° to 80°C Operating Temperature 0° to 80°C CL2 (Discrete Pair) Flammability Rating VW-1 (Ribbon Cable) Safety Certificates RoHS compliant 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Page 4 of 15 TE Connectivity Technical Datasheet Sliver Cable Assemblies Table 6. Discrete Primary Pair Cable Specifications Bend Radius Cable Dimensions 33AWG 85Ω 4.5mm (good way bend) Thickness = .64 mm Width per pair = 1.09 mm 5 GHz = 5.2 dB/m Attenuation 33AWG 85Ω 12.89 GHz = 8.6 dB/m 20 GHz = 11.4 dB/m 25 GHz = 13.8 dB/m Cable Dimensions 33AWG 100Ω Thickness = .71 mm Width per pair = 1.24 mm 5 GHz = 4.3 dB/m Attenuation 33AWG 100Ω 12.89 GHz = 7.4 dB/m 20 GHz = 9.9 dB/m 25 GHz = 11.9 dB/m Table 7. Laminated Ribbon Cable Specifications Bend Radius 3mm Thickness = 0.65 mm Cable Dimensions 33AWG 85Ω Width 8 pair = 13.97mm Width 12 pair = 21.17mm 5 GHz = 5.4dB/m Attenuation 33AWG 85Ω 7 GHz = 6.7dB/m 10 GHz = 9.1dB/m Thickness = 0.75 mm Cable Dimensions 33AWG 100Ω Width 8 pair = 13.97mm Width 12 pair = 21.17mm 5 GHz = 5.4dB/m Attenuation 33AWG 100Ω 7 GHz = 6.7dB/m 10 GHz = 9.1dB/m 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Page 5 of 15 TE Connectivity Technical Datasheet Sliver Cable Assemblies PIN CONFIGURATIONS Sliver 50 Position 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Page 6 of 15 TE Connectivity Technical Datasheet Sliver Cable Assemblies Sliver 74 Position 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Page 7 of 15 TE Connectivity Technical Datasheet Sliver Cable Assemblies SLIVER CABLE ASSEMBLY MECHANICAL SCHEMATICS Sliver 50 Position Straight Cable Assembly Sliver 74 Position Straight Cable Assembly 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Page 8 of 15 TE Connectivity Technical Datasheet Sliver Cable Assemblies Sliver 50 Position Right Angle Cable Assembly Sliver 74 Position Right Angle Cable Assembly 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Page 9 of 15 TE Connectivity Technical Datasheet Sliver Cable Assemblies SIGNAL INTEGRITY PERFORMANCE Insertion Loss (SDD21) of 1m 33AWG 100 Ohm 25G Sliver Mode Conversion (SCD21) of 1m 33AWG 100 Ohm 25G Sliver Return Loss (SDD11) of 1m 33AWG 100 Ohm 25G Sliver 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Page 10 of 15 TE Connectivity Technical Datasheet Sliver Cable Assemblies Return Loss (SDD22) of 1m 33AWG 100 Ohm 25G Sliver Insertion Loss (SDD21) of 1m 33AWG 85 Ohm 25G Sliver Mode Conversion (SCD21) of 1m 33AWG 85 Ohm 25G Sliver 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Page 11 of 15 TE Connectivity Technical Datasheet Sliver Cable Assemblies Return Loss (SDD11) of 1m 33AWG 85 Ohm 25G Sliver Return Loss (SDD22) of 1m 33AWG 85 Ohm 25G Sliver Insertion Loss (SDD21) of 1m 33AWG 100 Ohm 12G Sliver 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Page 12 of 15 TE Connectivity Technical Datasheet Sliver Cable Assemblies Mode Conversion (SCD21) of 1m 33AWG 100 Ohm 12G Sliver Return Loss (SDD11) of 1m 33AWG 100 Ohm 12G Sliver Return Loss (SDD22) of 1m 33AWG 100 Ohm 12G Sliver 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Page 13 of 15 TE Connectivity Technical Datasheet Sliver Cable Assemblies Insertion Loss (SDD21) of 1m 33AWG 85 Ohm 12G Sliver Mode Conversion (SCD21) of 1m 33AWG 85 Ohm 12G Sliver Return Loss (SDD11) of 1m 33AWG 85 Ohm 12G Sliver 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Page 14 of 15 TE Connectivity Technical Datasheet Sliver Cable Assemblies Return Loss (SDD22) of 1m 33AWG 85 Ohm 12G Sliver While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES REGARDING THE INFORMATION CONTAINED HEREIN, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. In no event will TE be liable for any direct, indirect, incidental, special or consequential damages arising from or related to recipient’s use of the information. It is the sole responsibility of recipient of this information to verify the results of this information using their engineering and product environment. Recipient assumes any and all risks associated with the use of the information. 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Page 15 of 15