3-1393100-4

General Purpose Relays Industrial Relays Potter & Brumfield KBP Series Panel Relay n Dual coil latching relay accepts a momentary impulse to one coil to latch and a second impulse to the other coil to release n Clear polycarbonate dust cover with 11- or 20-pin plug n 11- or 20-pin octal-style plug connector n AC and DC coils n Two, four, and five pole Form C (CO) contact arrangements Typical applications Elevator controls U Approvals Coil Data (continued) Technical data of approved types on request Coil versions, AC coil Coil Rated Operate code voltage voltage VAC VAC 2 and 4 pole models 24 24 20.004 120 120 102 240 240 204 5 pole models 24 24 20.4 120 120 102 UL E29244 Contact Data 2 pole 4 pole 5 pole Contact arrangement 2 form C (CO) 4 form C (CO) 5 form C (CO) Rated voltage 120VAC Rated current 10A Contact material Ag, AgCdO Min. recommended contact load Ag contacts 100mA, 12VDC AgCdO contacts 300mA, 12VDC Initial contact resistance Ag contacts 100mΩ AgCdO contacts 200mΩ Frequency of operation 360 ops./hour Contact ratings Type Load UL 508 Ag 5A, 120VAC AgCdO 10A, 120VAC Mechanical endurance Coil Data Coil voltage range Coil versions, DC coil Coil Rated Operate code voltage voltage VDC VDC 12 12 9 24 24 18 48 48 36 110 110 82.5 – 220 165 Cycles 500x103 ops. 50x103 50x103 Rated coil power W 2.8 2.5 2.71 2.65 2.42 All figures are given for coil without preenergization, at ambient temperature +23°C. 42 1030 4100 5.05 5.3 5.3 27 700 7.8 8.2 All figures are given for coil without preenergization, at ambient temperature +23°C Insulation Data Initial dielectric strength between open contacts between contact and coil between adjacent contacts Initial insulation resistance between insulated elements 500Vrms 1000Vrms 1000Vrms 100MΩ Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -45ºC to 85ºC Category of environmental protection IEC 61810 RTI - dust protected and RT0 - open style Terminal type 11- or 20-pin octal-style plug Weight 306g Packaging/unit tray/25 pcs., box/60pcs. Accessories For details see datasheet Product Code 27E892 27E123 27E928 08-2011, Rev. 0811 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Rated coil power VA Other Data 12 to 220VDC 6 to 240VAC Coil resistance Ω±10% 52 230 850 4560 Use 110VDC relay with 5KΩ, 5W resistor in series Coil resistance Ω±15% Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Sockets and Accessories, KBP Relays Description DIN 11 pin octal socket Track mount 11 pin octal socket 17 and 20 pin octal socket Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Relays Industrial Relays Potter & Brumfield KBP Series Panel Relay (Continued) Dimensions KBP - enclosed KB - open style 2.205 MAX. (36.01) 1.781 MAX. TYP. (45.24) 1.187 REF. TYP. (30.15) 3.56 MAX. (90.4) .005 (0.127) .010 (0.254) 2.406 MAX. (61.11) 1.25 ± .03 (31.8 ± .8) .156" DIA. (4) MTG. HOLES (2 HOLES EACH FOR END OR BOTTOM MOUNTING.) 1.12 ± .015 (46.02 ± 0.3 ) 1.375 (34.2) .875 REF. TYP. (22.23) .44 ± .03 (11.2 ± .8) .56 ± .03 (14.2 ± .8) .250 (6.35) .500 (12.7) .031 REF. (0.7) .25 (6.35) 3.22 (1.7 ) 1.60 (40.7) Terminal assignment 2 Form C 4 Form C 5 Form C 9 11 4 3 2 5 6 7 7 8 9 10 1 11 3 8 5 6 4 9 11 13 7 101214 2 16 18 15 17 20 19 1 Latch Reset KBP11 3 8 5 6 4 1 13 10 1214 16 18 2 Reset Latch KBP17 15 17 20 19 Reset Latch KBP20 Note: Shown with reset coil energized last. Product code structure Typical product code -KBP -11 A G -24 Coil Part Number Type KBP Enclosed, dual coil mechanical latching relay KB Open, dual coil mechanical latching relay Contact arrangement 11 2 form C (2CO) 20 5 form C (5CO) 17 4 form C (4CO) Coil input A AC D DC Contact rating Blank 5A, 120VAC (Ag) G 10A, 120VAC, 80% PF (AgCdO) Coil voltage Coil code: please refer to coil versions table Specify the same latch and release coil voltage for standard relays. Unlike coils available on special order. 2 Product Code Arrangement Case style Contact material KB-17AG-120 4 form C, 4 CO open AgCdO KB-17DG-12 KBP-11AG-120 2 form C, 2 CO enclosed KBP-11DG-24 KBP-11DG-110 KBP-20AG-120 5 form C, 5 CO 08-2011, Rev. 0811 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 120VAC 12VDC 120VAC 24VDC 110VDC 120VAC Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 1-1393100-2 1-1393100-5 2-1393100-4 2-1393100-6 2-1393100-5 3-1393100-4 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.