3-1393159-3

POTTER & BRUMFIELD SOCKETS & ACCESSORIES, KRPA RELAYS GENERAL PURPOSE RELAYS INDUSTRIAL RELAYS INTRODUCTION Relay accessories are devices to support the design and maintenance of relays in electrical circuits. This relay series include clips, mounting adapters and sockets. Mounting adapters provide adaptation between standard socket types. Sockets are used for relay mounting in configurations, including panel mount and DIN rail and clips are used to secure the relay in the connector. FEATURES • Sockets for relays with 8-pin (octal) and 11-pin (undecal) round plugs • Screw terminals • Hold down springs • Various mounting options APPROVALS • UL E59244 • CSA LR15734 U Technical data of approved types on request. TECHNICAL DATA Socket contact material Spring brass, tin plated Socket body material 27E122 and 27E123 Glass-filled polyester 27E891 and 27E892 Polyamide Maximum current 10A Maximum Voltage 300VAC (600V for 27E891) Potter & Brumfield Sockets & Accessories, KRPA Relays DIMENSIONS Screw terminal socket for relays with 8-pin octal base Screw terminal socket for relays with 11-pin undecal base 27E123 27E122 Offers screw termination for KRPA relays and other devices with 8-pin octal base. When panel mounting, two #6-32 screws of suitable length are required. When track mounting, two 24A071 retainer clips or two 24A072 retainer clips are required. Offers screw termination for KRPA relays and other devices with 11-pin undecal base. When panel mounting, two #6-32 screws of suitable length are required. When track mounting, two 24A071 retainer clips or two 24A072 retainer clips are required. 2.060 1.296 (32.92) .648 (16.46) 6 .156 (3.96) TYP. 2.385 (60.58) MAX. 5 4 .648 (16.46) 3 (52.32) 1.030 (26.16 ) 1.296 (32.92) 8 .156 (3.96) TYP. 2.385 (60.58) MAX. 1. 18 8 (30.18 ) .1 56 DIA. TYP. (3.96) 7 6 5 4 2 3 1. 18 8 (30.18 ) .210 (5.33) TYP. .781 ¢ (19.84) 1.572 MAX. (39.93) 7 8 1 2 # 6-32 SCREWS & CAPTIVE WASHERS .925 (23.50) MAX. .210 (5.33) TYP. ¢ 1. 15 6 (29.36) 2.322 MAX. (58.98) .010 (.25) MAX. STANDOFF 1 # 6-32 SCREWS & CAPTIVE WASHERS .925 (23.50) MAX. ¢ 9 1 0 11 .010 (.25) MAX. STANDOFF Screw terminal, DIN rail, snap-mount socket 27E891 Screw terminal, DIN rail, snap-mount socket 27E892 Offers screw termination for KRPA relays and other devices with 8-pin octal base. This socket is constructed with a spring-loaded latch which allows it to be quickly snapped onto or removed from a DIN or “top hat” style mounting track. No special tools or extra hardware is required for installation. Sockets have M3.5 screw terminals which accept up to two #12 AWG wires. Offers screw termination for KRPA relays and other devices with 11-pin undecal base. This socket is constructed with a springloaded latch which allows it to be quickly snapped onto or removed from a DIN or “top hat” style mounting track. No special tools or extra hardware is required for installation. Sockets have M3.5 screw terminals which accept up to two #12 AWG wires. 2.060 (52.32) 1.295 (32.89) 2 1 8 7 .1 65 (4.19 ) DIA.TYP. 2 1. 018 (25.84) 1. 005 (25.53) 11 10 9 2.035 (51.69) 2.010 (51.05) .312 TYP. (7.92) 1 3 .1 65 (4.19 ) DIA.TYP 3 .580 (14.73) 4 5 6 4 .580 (14.73) .312 TYP. (7.92) 2.332 (59.22) 1.575 (40.01) 5 6 7 8 .770 (19.56) .970 (24.64) .970 (24.64) ORDERING CODE Ordering Code for Sockets Recommended hold down springs TE Part Number P&B Part Number Pins Terminal type Mounting TE Part Number P&B Part Number 1393143-6 27E122 8 screw panel/rail 1419111-1 20C206 2-1419106-3 27E891 8 screw snap-on DIN-rail 5-1393159-0 20C419 1393143-7 27E123 11 screw panel/rail 1419111-1 20C206 2-1419106-4 27E892 11 screw snap-on DIN-rail 5-1393159-0 20C419 All accessories must be ordered separately. For panel mounting versions, two #6-32 nuts and screws of suitable length are required. Recommended installation torque for terminal screws is 7.5 in-lb. INDUSTRIAL / POTTER & BRUMFIELD SOCKETS & ACCESSORIES, KRPA RELAYS 2 TRACK AND MOUNTING ACCESSORIES 40G432 24A110 24A071 40G432 24A072 24A071 DIMENSIONS 24A110 DIN rail style mounting track 24A110 mounting track is designed to accept snap-mount sockets, as well as other P&B screw terminal sockets. Track is made of lightweight, sturdy extruded aluminum and is shipped in three-foot (914cm) lengths with mounting holes on six-inch (152mm) centers. Track can be cut to shorter lengths or used end-to-end. 3.00 (76.2) .750 (19.05) 6.00 (152.4) 36.00 ± .060 (914.4 ± 1.52) .187 (4.75) 1.375 ± .0 10 (34.93 ± .254) .405 ± .0 07 (10.29 ± .178) End Clip 24A071 steel mounting clip with one #6-32 screw 7/16” (11.1 mm ) long is used with a 40G432 insulator to prevent sockets form moving sideways or sliding off the end of the track. ORDERING CODE FOR ACCESSORIES Product Code Description Part number 20C206 Relay hold down spring for use with 27E122 & 27E123 KRPA sockets. For mounting track Is held in place by mounting hardware 24A071 (sold separetly). For panel mounting, two #6-32 screws of suitable length are required. 1419111-1 20C419 Snap-in relay hold down spring (coil type) for use with 27E891 and 27E892 KRPA sockets. 5-1393159-0 24A110 Mounting track 1419111-6 24A071 Steel mounting clip with #6-32 screw use with sockets 27E122 and 27E123 on 24A110 track (compatible with 20C206 hold down spring) 1419111-5 24A072 Plastic twist mounting clip - use with sockets 27E122 and 27E123 on 24A110 track (when no hold down spring is used.) 5-1393159-4 40G432 Plastic insulator - use with 24A071 to make end clip for 24A110 track 9-1393159-5 All accessories must be ordered separately. te.com ©2024 TE Connectivity Ltd. Family of Companies. All Rights Reserved. TE Connectivity, TE connectivity (logo) and Every Connection Counts are trademarks owned or licensed by the TE Connectivity family of companies. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any changes to the information contained herein without prior notice. TE Connectivity assumes only those obligations set forth in the terms and conditions for this product and shall in no event be liable for any incidental, indirect, or consequential damages arising out of the sale, resale, use, or misapplication of the product. TE expressly disclaims any implied warranties with respect to the information contained herein, including, but not limited to, implied warranties of merchantability or fitness for a particular purpose. Dimensions, specifications and/or information contained herein are for reference purposes only and are subject to change without notice. Consult TE for the latest dimensions, specifications and/or information. Users of TE Connectivity products must make their own assessment as to whether the respective product is suitable for the respective desired application. 04/24   ED INDUSTRIAL / POTTER & BRUMFIELD SOCKETS & ACCESSORIES, KRPA RELAYS