3-1415540-0

General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 Inrush n 1 pole 16A, 1 form C (CO) or 1 form A (NO) contact inrush peak currents up to 80A n Mono- or bistable coil n 5kV/10mm coil-contact n Reinforced insulation n Ambient temperature 85°C n Product in accordance to IEC 60335-1 n For Typical applications Domestic appliances, heating control, lighting control Approvals VDE Cert. No. 40007571, UL E214025, cCSAus 1142018, CQC 18002197247 (monostable), 18002197364 (bistable) Technical data of approved types on request Contact Data Contact arrangement 1 form C (CO) or 1 form A (NO) Rated voltage 250VAC Max. switching voltage 400VAC Rated current 16A Limiting continuous current 16A, UL: 20A (K-version) Limiting making current, max. 4s, df 10% 30A max. 20ms (incandescent lamps), RT33L version 80A Breaking capacity max. 4000VA Contact material AgNi90/10, AgSnO Frequency of operation, with/without load 360/72000h-1 Operate/release time max., DC coil 9/6ms Operate/Reset time max., bistable version 10/10ms Bounce time max., form A/form B 3/6ms F0177-C Zb Coil Data, DC coil Coil voltage range Operative range, IEC 61810 Coil insulation system according UL 3 to 110VDC 2 class F Coil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10%1) mW 003 3 2.1 0.3 21.4 421 005 5 3.5 0.5 62 403 006 6 4.2 0.6 90 400 012 12 8.4 1.2 360 400 024 24 16.8 2.4 1440 400 048 48 33.6 4.8 5520 417 060 60 42.0 6.0 85701) 420 1) Coil resistance ±12%. All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. Contact ratings Type Contact Load Cycles IEC 61810 RT33L A (NO) 16A, 250VAC resistive, 85°C 50x103 RT33L A (NO) 10A, 400VAC resistive, 85°C 10x10³ RT31 C (CO) 16A, 250VAC resistive, 85°C 5x10³ RT33K A (NO) 16A, 250VAC resistive, 85°C 30x103 UL 61810-1 (former UL 508) RT33K A (NO) 20A, 277VAC general purpose, 40°C 10x103 RT33L A (NO) 16A, 250VAC resistive, 85°C 50x103 RT31 C (CO) 16A, 250VAC resistive, 85°C 6x10³ RT33L A (NO) 1000W Tungsten, 120VAC, 60 Hz, 40°C 6x103 RT33L A (NO) 1000W standard ballast, 120VAC, 60 Hz, 40°C 6x103 EN 60947-4-1 RT31L/RT33L A (NO) 250V/6A, AC-3 6.050 Mechanical endurance monostable version >30x106 operations bistable version >5x106 operations 10-2023, Rev. 4 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 Inrush (Continued) Coil Data, bistable coils 1 coil 2 coils Magnetic system polarized, bistable Coil voltage range 5 to 24VDC Operative range, IEC 61810 2 Limiting voltage, % of rated coil voltage 120% 150% Min./Max. energization duration 30ms/1min at