3-1614782-1

Thick Film Power Resistors Type BDS100 Series Key Features I 100W in a 9.5cm2 footprint • Gives an impressive power density of 10.5W/cm2 I Virtually inductance-free • Inductance < 40nH I Wide resistance range: 0.47Ω to 1MΩ • Coupled with 1% tolerance gives ultimate design flexibility I Multiple terminal configurations and multi-resistor packages • The space saving solution I Partial discharge 100GΩ at 2kV 10GΩ) Temperature Cycling: -55°C to +125°C, 5cycles ΔR 0.25% Typ Operating Storage Temp: Short Term Overload: Vibration: Bump: 1773308 CIS BI 11/2011 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. -55°C to +125°C 3 x PRated (10s) ΔR 0.25% Typ 10/500Hz ΔR 0.25% Typ 40g 4000 bumps ΔR 0.25% Typ Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, go to: te.com/help Thick Film Power Resistors Type BDS100 Series Characteristics - Mechanical Terminal Size: M4 Terminal Torque (max.): 1.3Nm Creepage Distance: 10mm Clearance: Terminal to Heatsink 10mm Terminal to Terminal 3mm Ra < 6μm Heatsink Surface Finish: Heatsink Flatness: 0.05mm Weight: 35g Dimensions M4 Nuts 15.5 ±0.2 M4 Nuts 37.8 ±0.2 30 ±0.15 37.8 ±0.2 30 ±0.15 15.5 ±0.2 4 12 ±0.2 12 ±0.2 1 2 ø4.2 ø4.2 ø4.2 15 ±0.2 3 25.4 ±0.2 3 25.4 ±0.2 4 1 4.5 ±0.2 2 15 ±0.2 3.8 ±0.2 3.8 ±0.2 4.5 ±0.2 Terminal Circuit Type D (Isolated) A (Standard) 1 2 4 3 2 1 E (Network Tapped) B (Voltage Sense) 1 2 4 3 2 1 4 3 F (Network 3 Res.) C (Special) 4 3 1 2 3 1 Derating Curve Pulse Energy 10 100 Energy (J) Power (W) 80 60 40 0.1 20 0 0.1 0 20 40 60 80 Heatsink Temp. (degC) 100 120 0.01 0.1 1 10 Time (msecs) How to Order BDS 2 A 100 Common Part Circuit Type Power Dissipation J Resistance Value Tolerance 0.6Ω (600mΩ) R60 BDS 2 (2 Terminal) BDS 4 (4 Terminal) 1K0 A: Standard B-F: See above F - 1% 100 - 100 Watts at 70°C 1Ω (1000mΩ) 1R0 J - 5% K - 10% 1KΩ (1000Ω) 1KO 1MΩ (1000000Ω) 1MO TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Other logos, product and Company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.