RoHS
Ready
AMPMODU
Interconnection System
European Standard Products
1
TYCO ELECTRONICS TECHNOLOGY PORTFOLIO
● Connector Systems /
Electromechanical Components
● Relays
● Wireless
● Antennas, GPS Antennas,
Integrated Antenna Systems
● Sensors
● Wire & Cable
● Resistors and Inductors
● Circuit Protection Devices
● Heat Sinks /Thermal Management
● Touchscreens /
Interactive Displays
● Switches
● Application Tooling
● Battery Assemblies
● Fiber Optic (Passive)
● Power Systems /
Electronic Modules
● Heat Shrink Tubing
● Magnetics
● Identification & Labeling Products
● Racks and Panels
● Smart Cards / Leadframes
● Clock Springs
● Small Motors (20–1,500 W)
2
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU Interconnection System
Contents
AMPMODU 3.96mm Centreline Interconnection System
Page
MOD I Receptacle Housings and Crimp Contacts ………………………………………………………………………………………………6
MOD I PCB Receptacle Contacts ……………………………………………………………………………………………………………………………7
MOD I Shrouded Headers ………………………………………………………………………………………………………………………………………8
MOD I Unshrouded Headers……………………………………………………………………………………………………………………………………9
MOD I Shunt Connectors …………………………………………………………………………………………………………………………………………9
AMPMODU 2.54mm Centreline Interconnection System - Italian Range
MOD II Receptacle Housings and Crimp Contacts ……………………………………………………………………………………………12
MOD II Pin Housings and Crimp Contacts …………………………………………………………………………………………………………13
MOD II PCB Receptacles ………………………………………………………………………………………………………………………………………14
MOD II Shrouded Headers ……………………………………………………………………………………………………………………………15-16
AMPMODU 2.54mm Centreline Interconnection System
MOD II Breakaway Pin Headers ……………………………………………………………………………………………………………………18-23
MOD II ACTION PIN Posts ……………………………………………………………………………………………………………………………………23
HV-100 / HV-190 PCB Receptacles ……………………………………………………………………………………………………………24-29
MOD II Shrouded Headers ……………………………………………………………………………………………………………………………30-31
MOD IV Receptacle Housings and Accessories …………………………………………………………………………………………32-34
MOD IV / V Receptacle Crimp Contacts ……………………………………………………………………………………………………………35
MOD II PCB Receptacle Contacts…………………………………………………………………………………………………………………………36
MOD IV Shunt Connectors ……………………………………………………………………………………………………………………………………36
AMPMODU Locking Clip Connectors
Locking Clip Receptacle Housings and Crimp Contacts ……………………………………………………………………………38-40
HE 13 / HE 14 - 2.54mm Centreline Interconnection System
IDC Receptacle Assemblies ……………………………………………………………………………………………………………………………42-43
Shrouded Headers……………………………………………………………………………………………………………………………………………44-45
Receptacle Housings and Crimp Contacts …………………………………………………………………………………………………………46
Application Tooling…………………………………………………………………………………………………………………………………………………49
Part Number Index …………………………………………………………………………………………………………………………………………………50
Global Contacts ………………………………………………………………………………………………………………………………………………………51
3
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU Interconnection System
Restriction on the Use of Hazardous Substances (RoHS)
At Tyco Electronics, we’re ready to support your RoHS requirements. We’ve assessed more than 1.5 million end items/components for
RoHS compliance, and issued new part numbers where any change was required to eliminate the restricted materials. Part numbers in this
catalogue are identified as:
RoHS Compliant
Part numbers in this catalog are RoHS Compliant, unless marked otherwise.
These products comply with European Union Directive 2002/95/EC as amended 1 January 2006 that restricts the use of lead, mercury,
cadmium, hexavalent chromium, PBB, and PBDE in certain electrical and electronic products sold into the EU as of 1 July 2006.
Note: For purposes of this Catalog, included within the definition of RoHS Compliant are products that are clearly “Out of Scope” of the RoHS
Directive such as hand tools and other non-electrical accessories.
Non-RoHS Compliant
These part numbers are identified with a “ ” symbol. These products do not comply with the material restrictions of the European Union
Directive 2002/95/EC.
5 of 6 Compliant
A “ ” symbol identifies these part numbers. These products do not fully comply with the European Union Directive 2002/95/EC because
they contain lead in solderable interfaces (they do not contain any of the other five restricted substances above allowable limits). However,
these products may be suitable for use in RoHS applications where there is an application-based exception for lead in solders, such as the
server, storage, or networking infrastructure exemption.
Note: Information regarding RoHS compliance is provided based on reasonable inquiry of our suppliers and represents our current actual
knowledge based on the information provided by our suppliers. This information is subject to change. For latest compliance status, refer to
our website referenced below.
Getting the Information You Need
Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your questions and support your RoHS needs.
A RoHS FAQ (Frequently Asked Questions) is available with links to more detailed information. You can also submit RoHS questions and
receive a response within 24 hours during a normal work week. The Support Center also provides:
■
Cross-Reference from Non-compliant to Compliant Products
■
Ability to browse RoHS Compliant Products in our on-line catalog:
http://ecommas.tycoelectronics.com/commerce/alt/RohsAltHome.do
■
Downloadable Technical Data Customer Information Presentation
■
More detailed information regarding the definitions used above
So whatever your questions when it comes to RoHS, we’ve got the answers at www.tycoelectronics.com/leadfree
4
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 3.96mm Centreline Interconnection System
Product Facts
■
Rugged connector system featuring 0.79 x 1.57mm posts
with mating receptacles
■
Current rating 5 amps max per contact
■
Available for board-to-board and wire-to-board connection
■
Contacts available in both tin and gold plating
■
Flame retardant thermoplastic housings UL 94V-1 rated
■
Shrouded pin headers feature polarisation and detent latching
Specification:
Current Rating
- 5 A max
Operating Temperature
- -40°C to +105°C
Engaging Force
- 2.5 N per contact max
(standard pressure contacts)
Separating Force
- 0.5 N per contact min
(standard pressure contacts)
Durability
- 0.4 μm gold — 100 cycles
0.8 μm tin — 10 cycles
(standard pressure contacts)
Contact Resistance
- 15 mΩ max
Insulation Resistance
- 5000 MΩ min
The 0.79 x 1.57mm interconnection system has been an industry standard for over 30 years. It is a rugged large scale system for board-to-board and
wire-to-board connection in applications such as power supplies, industrial control and switchgear.
MOD I Receptacles
Cable mount receptacle housings accept crimp contacts with a wire size range from 17-22AWG (0.32-1.00mm2) and with a variety of plating options.
Contacts are available in both reeled and loose piece format to suit different manufacturing requirements and volumes. Unhoused pcb receptacle contacts
provide a simple board-to-board solution with MOD I unshrouded headers.
MOD I Headers
Pcb mount headers are provided in both shrouded and unshrouded versions. Shrouded headers are available in both straight and right angle variants with
built-in polarisation when used with MOD I cable mount receptacles. Unshrouded pcb headers are offered for straight pcb mounting. Tin or gold plated
contacts are available for both styles.
MOD I Shunt Connectors
The shunt connector is the easiest form of programming, allowing simple and flexible electrical connection. Supplied in strips they can be broken off as
required. The open top design allows the use of a test probe while located in-circuit.
5
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 3.96mm Centreline Interconnection System
MOD I Receptacle Housings
Single Row
Mating Connectors:
Specification:
Housing
- Green glass fibre filled
polycarbonate, UL 94V-1 rated
MOD I Shrouded Headers - Page 8
Technical Documents:
Product Specification - 108-20026
Application Specification - 114-20040
No. of
Positions
2
4
6
8
10
12
Dimension
A
7.8
15.7
23.7
31.6
39.5
47.4
B
3.96
11.89
19.81
27.74
35.66
43.59
Keying Plug
Part
Number
280590
280591
280592
280593
280594
280595
87116-2
MOD I Crimp Snap-In Receptacle Contacts
with Insulation Support
Specification:
Material
- Phosphor bronze, plated as follows:
Plating A
- Selectively plated 0.8 μm gold on
contact area, with gold flash over
1.27 μm nickel on entire contact
Plating B
- Selectively plated 0.4 μm gold on
contact area with gold flash over
1.27 μm nickel on entire contact
Plating C
- Pre-tin plated 0.8 μm
Technical Documents:
Related Products:
Product Specification - 108-20026
Application Specification - 114-20040
Extraction Tool - 843473-1
Wire Size Range
mm2
AWG
Insulation Diameter
mm
0.32-0.80
22-18
1.80-2.30
0.5 -1.0
20-17
2.20-2.80
Part Number
Plating
Plating B
Plating C
Plating A
Plating C
Plating C
Strip Form
280621-2
280621-1
280621-6
280702-1*
281423-1*
Loose Piece
181299-2
181299-1
181299-6
182198-1*
–
* With high contact pressure
For application tooling please see page 49
6
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 3.96mm Centreline Interconnection System
MOD I PCB Mount Receptacle Contacts
Specification:
Mating Connectors:
Material
- Phosphor bronze
Plating
- See table
MOD I Unshrouded Headers - Page 9
Technical Documents:
Application Specification - 114-25004
Post Entry
Type A
On Reel
141002-1
142165-1
141002-4
141584-2
Loose Piece
141007-2
–
141007-4
–
Keying Plug
86181-2
with Solder Stop Area
Type A
Post Entry
Part Number
Type B
Loose Piece
141008-2
142166-2
141008-4
141589-2
with Solder Stop Area
Type B
Type C
On Reel
141003-2
142166-1
141003-4
141585-2
On Reel
141004-2
–
141004-4
141586-2
Post Entry
Type C
Plating
Loose Piece
(Contact Zone)
141009-2
Galvanised tin plated
–
Tin plated with solder stop area
141009-4
0.8 μm Au over 1.3 μm Ni
141590-2 Duplex 0.8 μm Au over 1.3 μm Ni*
* In the duplex gold plated version, the rest of the receptacle is nickel plated, the solder tabs are tin plated
7
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 3.96mm Centreline Interconnection System
MOD I Shrouded Headers
Straight
Specification:
Housing
Mating Connectors:
- Green glass fibre filled polycarbonate,
UL 94V-1 rated
- Brass (gold plating) or phosphor bronze
(tin plating). Plating details as follows:
- Gold 0.4 μm on contact area, tin on
solder area, with entire post underplated
1.3 μm nickel
- Tin 3.8 μm min
Posts
Plating A
Plating B
MOD I Receptacle Housings - Page 6
Technical Documents:
Product Specification - 108-20026
No. of
Positions
2
4
6
8
10
12
Dimension
A
6.2
14.2
22.1
30.0
37.9
45.9
Part Number
B
3.96
11.89
19.81
27.74
35.66
43.59
Plating A
280609-2
280610-2
280611-2
280612-2
280613-2
280614-2
Plating B
280609-1
280610-1
280611-1
280612-1
280613-1
280614-1
MOD I Shrouded Headers
Right Angle
Specification:
Mating Connectors:
Housing
- Green glass fibre filled polycarbonate,
UL 94V-1 rated
MOD I Receptacle Housings - Page 6
Posts
- Brass (gold plating) or phosphor bronze
(tin plating). Plating details as follows:
Plating A
- Gold 0.4 μm on contact area, tin on
solder area, with entire post underplated
1.3 μm nickel
Plating B
- Tin 3.8 μm min
Technical Documents:
Product Specification - 108-20026
No. of
Positions
2
4
6
8
10
12
Dimension
A
6.2
14.2
22.1
30.0
37.9
45.9
Part Number
B
3.96
11.89
19.81
27.74
35.66
43.59
Plating A
280615-2
280616-2
280617-2
280618-2
280619-2
280620-2
Plating B
280615-1
280616-1
280617-1
280618-1
280619-1
280620-1
8
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 3.96mm Centreline Interconnection System
MOD I Unshrouded Headers
Straight
Specification:
Mating Connectors:
Housing
- Thermoplastic polyester, green
UL94V-0 rated
Posts
- Brass
Plating A
- 0.8 μm gold on contact area (F),
tin on solder area, with entire post
underplated 1.3 μm nickel
Plating B
- Tin plated 2.5 μm min tin over
1.3 μm nickel
MOD I PCB Receptacle Contacts - Page 7
Technical Documents:
Product Specification - 108-20026
No. of
Positions
2
3
4
5
6
7
8
9
10
20
36
Dimension
A
7.3
11.3
15.2
19.2
23.1
27.1
31.1
35.1
39.0
78.6
141.6
Part Number
Plating A
Plating B
826539-2
826576-2
826539-3
826576-3
826539-4
826576-4
826539-5
826576-5
826539-6
826576-6
826539-7
826576-7
826539-8
826576-8
826539-9
826576-9
1-826539-0
1-826576-0
2-826539-0
2-826576-0
3-826539-6
3-826576-6
For part numbers of positions not shown, please combine dash numbers appropriately
MOD I Shunt Connectors
Specification:
Housing
- Polyamide 6.6, green UL94-HB rated
Contact
- Phosphor bronze
Plating
- Tin 2 μm min
2
3
1
No. of
Positions
1
2
3
Part
Number
826853-1
826853-2
826853-3
4
1
2
Housing
Contact
3
4
Testing Probe
Posts
9
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 3.96mm Centreline Interconnection System
Engineering Notes
10
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System - Italian Range
Product Facts
■
Single and double row connector system featuring 0.63mm square
posts with mating receptacles
■
Current rating 3 amps max per contact
■
Available for board-to-board, wire-to-board and wire-to-wire applications
■
Contacts available in both tin and gold plating
■
Flame retardant thermoplastic housings UL 94V-1 and UL 94V-0 rated
■
Shrouded pin headers feature polarisation and detent latching
Specification:
Current Rating
- 3 A max
Operating Temperature
- -40°C to +80°C
Engaging Force
- 1.8 N per contact max
(standard pressure contacts)
Separating Force
- 0.4 N per contact min
(standard pressure contacts)
Durability
- 0.4 μm gold— 100 cycles
0.8 μm gold— 200 cycles
(standard pressure contacts)
Contact Resistance
- 15 mΩ max
Insulation Resistance
- 5000 MΩ min
A range of fully intermateable products on a 2.54mm centreline for board-to-board, wire-to-board and wire-to-wire applications. A very flexible range, ideal
where a number of system connection methods are required, the MOD II Italian range provides reliable and dependable connection for a wide range of
applications.
MOD II Receptacles
Receptacle products are offered in vertical and horizontal pcb mounting and as cable mount housings for crimp snap-in contacts with insulation support.
Both pcb and cable mount receptacles feature polarisation and detent latching giving a positive click when used with the corresponding header variants.
Crimp contacts for receptacle housings accommodate a wire size range of 20-30AWG (0.04mm2 to 0.5mm2) and are available with a number of different
plating options.
MOD II Shrouded Headers and Pin Housings
Available as both shrouded pcb headers with 0.63mm posts or as cable mount housings to accept crimp snap-in pin contacts with insulation support.
Shrouded headers feature gold or tin plating in straight or right angle and will mate with both pcb and cable mount receptacles. Cable mount pin housings also
mate with both pcb and cable mount receptacles. Crimp contacts for pin housings allow termination to wire size ranges 22-30AWG (0.04mm2 to 0.32mm2)
with a choice of plating finishes.
11
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System - Italian Range
MOD II Receptacle Housings
Single and Double Row
Specification:
Housing
Mating Connectors:
- Black thermoplastic,
UL 94V-1 rated
MOD II Shrouded Headers - Pages 15-16
MOD II Pin Housings - Page 13
Technical Documents:
Product Specification - 108-20025
Application Specification - 114-20004
Single Row
Double Row
No. of
Positions
2
4
6
8
9
10
12
15
22
Dimension
A
7.1
12.2
17.3
22.3
24.9
27.4
32.5
40.1
57.9
B
2.54
7.62
12.70
17.78
20.32
22.86
27.94
35.56
53.34
Keying Plug
Part
Number
280358
280359
280360
280361
280512
280362
280514
280363
280364
No. of
Positions
2x4
2x5
2x6
2x8
2x9
2x12
2x15
2x18
2x22
87077-2
Keying Plug
Dimension
A
12.2
14.7
17.2
22.3
24.9
32.5
40.1
47.8
57.9
B
7.62
10.16
12.70
17.78
20.32
27.94
35.56
43.18
53.34
Part
Number
280365
284123-1
282792-1
280366
280513
280515
280368
281018
280369
87077-2
MOD II Crimp Snap-In Receptacle Contacts
with Insulation Support
Specification:
Material
- Phosphor bronze, plated as follows:
Plating A
- Pre-tin plated 0.8 μm
Plating B
- Selectively plated 0.4 μm gold on contact
area, with gold flash over 1.3 μm nickel on
entire contact
Plating C
- Selectively plated 0.4 μm gold on contact
area, over 1.3 μm nickel on entire contact
Plating D
- Selectively plated 0.8 μm gold on contact
area, with gold flash over 1.3 μm nickel on
entire contact
Technical Documents:
Product Specification - 108-20025
Application Specification - 114-20004
Wire Size Range
mm2
AWG
Insulation Diameter
mm
0.5-0.2
20-24
1.60 max
0.32-0.13
22-26
0.90-1.55
0.08-0.04
28-30
0.64-1.27
Part Number
Plating
Plating D
Plating A
Plating B
Plating C
Plating D
Plating A
Plating B
Plating A
Strip Form
281999-1
281556-2*
280530-1
280530-3
280530-4
280708-2*
280422-1
280709-2*
Loose Piece
–
–
181270-1
181270-3
181270-4
182206-2*
181271-1
182207-2*
* With high contact pressure
For application tooling please see page 49
12
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System - Italian Range
MOD II Pin Housings
Single and Double Row
Specification:
Housing
Mating Connectors:
- Black thermoplastic,
UL 94V-1 rated
MOD II Receptacle Housings - Page 12
MOD II PCB Receptacles - Page 14
Technical Documents:
Product Specification - 108-20025
Single Row
Double Row
No. of
Positions
2
4
6
8
9
10
12
15
Dimension
A
7.4
12.5
17.5
22.6
25.1
27.7
32.8
40.4
Part
Number
280628
280629
280630
280631
280632
280633
280634
280635
B
2.54
7.62
12.70
17.78
20.32
22.86
27.94
35.56
No. of
Positions
2x4
2x8
2x12
Dimension
A
12.5
22.6
32.8
B
7.62
17.78
27.94
Part
Number
280637
280638
280640
MOD II Crimp Snap-In Pin Contacts
with Insulation Support
Specification:
Material
- Phosphor bronze, plated as follows:
Plating A
- 2.5 μm tin over 1.3 μm nickel
on entire contact
Plating B
- Selectively plated 0.4 μm gold on
contact area, with gold flash over
1.3 μm nickel on entire contact
Technical Documents:
Application Specification - 114-16003
Wire Size Range
mm2
AWG
Insulation Diameter
mm
0.32-0.13
22-26
0.90-1.55
0.08-0.04
28-30
0.64-1.27
Part Number
Plating
Plating B
Plating A
Plating B
Strip Form
86557-6
1-86557-9
88048-4
Loose Piece
86561-6
1-86561-0
–
For application tooling please see page 49
13
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System - Italian Range
MOD II Receptacles
Vertical PCB Mount
Specification:
Housing
Mating Connectors:
- Black glass fibre filled polyester,
UL 94V-0 rated
MOD II Shrouded Headers - Pages 15-16
MOD II Pin Housings - Page 13
Contacts
- Phosphor bronze, plated as follows:
Plating A
- Selectively plated 0.4 μm gold on contact
area, with gold flash over nickel on
entire contact
Technical Documents:
Plating B
- Tin 0.8 μm
Product Specification - 108-20025
Single Row
Double Row
A+3.05
8.7
8.7
A
A
No. of
Positions
4
8
9
12
15
22
6.2
A+3.05
4.0
Dimension
A
7.62
17.78
20.32
27.94
35.56
53.34
Part Number
Plating A
Plating B
–
281327-1
281349-2
–
280851-2
–
281350-2
281331-1
281351-2
281328-1
–
281332-1
No. of
Positions
2x8
2x9
2x12
2x15
2x22
2.54
Dimension
A
17.78
20.32
27.94
35.56
53.34
Part Number
Plating A
Plating B
281352-2
281215-1
281353-2
281339-1
281216-2
281340-1
280922-2
–
280836-2
281342-1
Keying Plug
Keying Plug
86286-1
86286-1
MOD II Receptacles
Horizontal PCB Mount
Specification:
Mating Connectors:
Housing
- Black glass fibre filled polyester,
UL 94V-0 rated
MOD II Shrouded Headers - Pages 15-16
MOD II Pin Housings - Page 13
Contacts
- Phosphor bronze, plated as follows:
Plating A
- Selectively plated 0.4 μm gold on contact
area, with gold flash over nickel on
entire contact
Technical Documents:
Plating B
- Tin 0.8 μm
Product Specification - 108-20025
Single Row
Double Row
A+3.05
A+3.05
6.3
4.0
A
No. of
Positions
4
8
9
12
15
22
Keying Plug
Dimension
A
7.62
17.78
20.32
27.94
35.56
53.34
7.62
Part Number
Plating A
Plating B
281218-2
281333-1
280578-2
281334-1
280579-2
–
280580-2
281336-1
280581-2
–
280582-2
–
A
No. of
Positions
2x8
2x12
2x15
7.62
Dimension
A
17.78
27.94
35.56
Keying Plug
Part Number
Plating A
280583-2
280585-2
280586-2
86286-1
86286-1
14
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System - Italian Range
MOD II Shrouded Headers
Straight, Single Row
Specification:
Mating Connectors:
Housing
- Black thermoplastic, UL 94V-0 rated
Posts
- Brass (gold plating) or phosphor bronze
(tin plating). Plating details as follows:
Plating A
- Gold 0.8 μm on contact area and 2.5 μm
tin on solder area, with entire post
underplated 1.3 μm nickel
Plating B
- Gold 0.4 μm on contact area and 2.5 μm
tin on solder area, with entire post
underplated 1.3 μm nickel
Plating C
- Tin 3.5 μm
MOD II Receptacle Housings - Page 12
MOD II PCB Receptacles - Page 14
Technical Documents:
Product Specification - 108-20025
No. of
Positions
2
4
6
8
9
10
12
15
22
Dimension
A
7.7
12.7
17.8
22.9
25.4
28.0
33.1
40.7
58.5
B
2.54
7.62
12.70
17.78
20.32
22.86
27.94
35.56
53.34
Plating A
280370-3
280371-3
280372-3
280373-3
–
280374-3
280520-3
280375-3
280376-3
Part Number
Plating B
280370-2
280371-2
280372-2
280373-2
280508-2
280374-2
280520-2
280375-2
280376-2
Plating C
280370-1
280371-1
280372-1
280373-1
280508-1
280374-1
280520-1
280375-1
280376-1
Part Number
Plating B
280384-2
280385-2
280509-2
280521-2
280387-2
281019-2
280388-2
Plating C
280384-1
280385-1
280509-1
280521-1
280387-1
–
280388-1
MOD II Shrouded Headers
Straight, Double Row
Mating Connectors:
Specification:
Housing
- Black thermoplastic, UL 94V-0 rated
Posts
- Brass (gold plating) or phosphor bronze
(tin plating). Plating details as follows:
Plating A
- Gold 0.8 μm on contact area and 2.5 μm
tin on solder area, with entire post
underplated 1.3 μm nickel
Plating B
- Gold 0.4 μm on contact area and 2.5 μm
tin on solder area, with entire post
underplated 1.3 μm nickel
Plating C
- Tin 3.5 μm
MOD II Receptacle Housings - Page 12
MOD II PCB Receptacles - Page 14
Technical Documents:
Product Specification - 108-20025
No. of
Positions
2x4
2x8
2x9
2x12
2x15
2x18
2x22
Dimension
A
12.7
22.9
25.4
33.1
40.7
48.3
58.5
B
7.62
17.78
20.32
27.94
35.56
43.18
53.34
Plating A
280384-3
280385-3
280509-3
280521-3
280387-3
–
–
15
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System - Italian Range
MOD II Shrouded Headers
Right Angle, Single Row
Specification:
Mating Connectors:
Housing
- Black thermoplastic, UL 94V-0 rated
Posts
- Brass (gold plating) or phosphor bronze
(tin plating). Plating details as follows:
Plating A
- Gold 0.8 μm on contact area and 2.5 μm
tin on solder area, with entire post
underplated 1.3 μm nickel
Plating B
- Gold 0.4 μm on contact area and 2.5 μm
tin on solder area, with entire post
underplated 1.3 μm nickel
Plating C
- Tin 3.5 μm
MOD II Receptacle Housings - Page 12
MOD II PCB Receptacles - Page 14
Technical Documents:
Product Specification - 108-20025
No. of
Positions
2
4
6
8
9
10
12
15
22
Dimension
A
7.7
12.7
17.8
22.9
25.4
28.0
33.1
40.7
58.5
B
2.54
7.62
12.70
17.78
20.32
22.86
27.94
35.56
53.34
Plating A
280377-3
280378-3
280379-3
280380-3
–
280381-3
280523-3
–
–
Part Number
Plating B
280377-2
280378-2
280379-2
280380-2
–
280381-2
280523-2
280382-2
280383-2
Plating C
280377-1
280378-1
280379-1
280380-1
280511-1
280381-1
280523-1
280382-1
280383-1
Part Number
Plating B
280389-2
284124-1
282790-1
280390-2
280510-2
280522-2
280392-2
281021-2
280393-2
Plating C
280389-1
–
–
280390-1
280510-1
280522-1
280392-1
–
280393-1
MOD II Shrouded Headers
Right Angle, Double Row
Specification:
Mating Connectors:
Housing
- Black thermoplastic, UL 94V-0 rated
Posts
- Brass (gold plating) or phosphor bronze
(tin plating). Plating details as follows:
Plating A
- Gold 0.8 μm on contact area and 2.5 μm
tin on solder area, with entire post
underplated 1.3 μm nickel
Plating B
- Gold 0.4 μm on contact area and 2.5 μm
tin on solder area, with entire post
underplated 1.3 μm nickel
Plating C
- Tin 3.5 μm
MOD II Receptacle Housings - Page 12
MOD II PCB Receptacles - Page 14
Technical Documents:
Product Specification - 108-20025
No. of
Positions
2x4
2x5
2x6
2x8
2x9
2x12
2x15
2x18
2x22
Dimension
A
12.7
15.2
17.8
22.9
25.4
33.1
40.7
48.3
58.5
B
7.62
10.16
12.70
17.78
20.32
27.94
35.56
43.18
53.34
Plating A
280389-3
–
–
280390-3
280510-3
280522-3
280392-3
–
–
16
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System
Product Facts
■
Comprehensive single and double row connector system featuring
0.63mm posts with mating receptacles
■
Current rating 3A max per contact
■
Available for wire-to-board and board-to-board applications
■
Contacts available in both tin and gold plating
■
Flame retardant thermoplastic housings are UL 94V-0 rated
Specification:
Current Rating
- 3 A max
Operating Temperature
- -55°C to +105°C
Contact Resistance
- 20 mΩ max
Insulation Resistance
- 1000 MΩ min
A wide range of modular interconnects on the industry standard 2.54mm grid addressing applications across all industry sectors. Designed for
wire-to-board or board-to-board connection, including stacking, the AMPMODU 2.54mm interconnection system provides a comprehensive solution for
this ever popular connection standard.
MOD II Breakaway Pin Headers
Supplied in a breakaway form, headers can be conveniently broken to any size needed ensuring maximum versatility. Available in straight and right angle,
compatibility with mating receptacles is assured through a range of pin lengths and plating options. Pin headers are offered for surface mount, press fit action
pin and standard through hole solder.
HV100/190 PCB Receptacles
HV100/190 receptacles are available in vertical and horizontal mounting and offer the benefit of a short contact point design. Options for sealing, top or
bottom entry and surface mounting ensure a suitable connector is available for each application. Three mounting heights for the HV100 vertical receptacle
allow the connector to be used for versatile stacking applications. All HV100/190 receptacles feature a choice of gold or tin contact plating.
MOD II High Temperature Shrouded Headers
With a range of dedicated cable mount receptacle products, the MOD II shrouded headers allow wire-to-board connection with the added security of shrouded
pin contacts. MOD II headers also offer the benefit of compatibility with surface mount reflow processes.
MOD IV Cable Mount Receptacles
Available in two styles, MOD IV cable mount receptacle housings accept MOD IV/V crimp snap-in contacts, providing connection to the MOD II shrouded
headers and the MOD II breakaway pin header family. Complete with a range of accessories including keying and retention plugs, this range of receptacles
offer reliable and cost effective wire-to-board connection. Contacts suitable for wire sizes 20-32AWG (0.032mm2 to 0.56mm2) are available with a range of
plating finishes in standard or high contact pressure variants.
MOD IV Shunt Connectors
The shunt connector provides quick and easy programming of electronic circuits. Supplied in strips they can be broken off as required, or may be supplied in
loose piece form. The open top design allows the use of a test probe while in-circuit.
17
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System
MOD II Low Cost Line Breakaway Pin Headers
Straight, Single Row 0.63mm Square Post
Specification:
Mating Connectors:
Housing
- Green polyester, glass filled,
UL 94V-0 rated
Posts
- Phosphor bronze, plated as follows:
HV100 PCB Receptacles - Pages 24-28
HV190 PCB Receptacles - Page 29
MOD IV Receptacle Housings - Page 34
Plating A
- Contact Zone (Area F) 0.8 μm
gold over 1.3 μm nickel
- Soldering Zone 3 μm min. tin
over 1.3 μm nickel
Plating B
- 2 μm min. tin over 1.3 μm nickel
Technical Documents:
Product Specification - 108-18012
A=11.8 B=5.8 F=4.4
Part Number
Plating A
Plating B
826646-2
826936-2
826646-3
826936-3
826646-4
826936-4
826646-5
826936-5
826646-6
826936-6
826646-7
826936-7
826646-8
826936-8
826646-9
826936-9
1-826646-0
1-826936-0
2-826646-0
2-826936-0
5-826646-0
5-826936-0
No. of
Positions
2
3
4
5
6
7
8
9
10
20
50
A=12.7 B=6.7 F=4.4
Part Number
Plating A
Plating B
826629-2
826926-2
826629-3
826926-3
826629-4
826926-4
826629-5
826926-5
826629-6
826926-6
826629-7
826926-7
826629-8
826926-8
826629-9
826926-9
1-826629-0
1-826926-0
2-826629-0
2-826926-0
5-826629-0
5-826926-0
A=14.0 B=8.0 F=4.4
Part Number
Plating A
Plating B
826648-2
826938-2
826648-3
826938-3
826648-4
826938-4
826648-5
826938-5
826648-6
826938-6
826648-7
826938-7
826648-8
826938-8
826648-9
826938-9
1-826648-0
1-826938-0
2-826648-0
2-826938-0
5-826648-0
5-826938-0
For part numbers of positions not shown, please combine dash numbers appropriately
MOD II Low Cost Line Breakaway Pin Headers
Straight, Double Row 0.63mm Square Post
Specification:
Mating Connectors:
Housing
- Green polyester, glass filled,
UL 94V-0 rated
Posts
- Phosphor bronze, plated as follows:
Plating A
- Contact Zone (Area F) 0.8 μm
gold over 1.3 μm nickel
HV100 PCB Receptacles - Pages 24-28
HV190 PCB Receptacles - Page 29
MOD IV Receptacle Housings - Page 34
- Soldering Zone 3 μm min. tin
over 1.3 μm nickel
Plating B
- 2 μm min. tin over 1.3 μm nickel
Technical Documents:
Product Specification - 108-18012
No. of
Positions
2x2
2x3
2x4
2x5
2x6
2x7
2x8
2x9
2x10
2x20
2x50
A=11.8 B=5.8 F=4.4
Part Number
Plating A
Plating B
826656-2
826942-2
826656-3
826942-3
826656-4
826942-4
826656-5
826942-5
826656-6
826942-6
826656-7
826942-7
826656-8
826942-8
826656-9
826942-9
1-826656-0
1-826942-0
2-826656-0
2-826942-0
5-826656-0
5-826942-0
A=12.7 B=6.7 F=5.5
Part Number
Plating A
Plating B
826632-2
826925-2
826632-3
826925-3
826632-4
826925-4
826632-5
826925-5
826632-6
826925-6
826632-7
826925-7
826632-8
826925-8
826632-9
826925-9
1-826632-0
1-826925-0
2-826632-0
2-826925-0
5-826632-0
5-826925-0
A=14.0 B=8.0 F=4.4
Part Number
Plating A
Plating B
826658-2
826944-2
826658-3
826944-3
826658-4
826944-4
826658-5
826944-5
826658-6
826944-6
826658-7
826944-7
826658-8
826944-8
826658-9
826944-9
1-826658-0
1-826944-0
2-826658-0
2-826944-0
5-826658-0
5-826944-0
For part numbers of positions not shown, please combine dash numbers appropriately
18
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System
MOD II Low Cost Line Breakaway Pin Headers
Right Angle, Single Row 0.63mm Square Post
Specification:
Mating Connectors:
Housing
- Green polyester, glass filled,
UL 94V-0 rated
Posts
- Phosphor bronze, plated as follows:
Plating A
- Contact Zone (Area F) 0.8 μm
gold over 1.3 μm nickel
HV100 PCB Receptacles - Pages 24-28
HV190 PCB Receptacles - Page 29
MOD IV Receptacle Housings - Page 34
- Soldering Zone 3 μm min. tin
over 1.3 μm nickel
Plating B
- 2 μm min. tin over 1.3 μm nickel
Technical Documents:
Product Specification - 108-18012
B=5.8 F=4.4
Part Number
Plating A
Plating B
826652-2
826949-2
826652-3
826949-3
826652-4
826949-4
826652-5
826949-5
826652-6
826949-6
826652-7
826949-7
826652-8
826949-8
826652-9
826949-9
1-826652-0
1-826949-0
2-826652-0
2-826949-0
5-826652-0
5-826949-0
No. of
Positions
2
3
4
5
6
7
8
9
10
20
50
B=6.7 F=4.4
Part Number
Plating A
Plating B
826631-2
826947-2
826631-3
826947-3
826631-4
826947-4
826631-5
826947-5
826631-6
826947-6
826631-7
826947-7
826631-8
826947-8
826631-9
826947-9
1-826631-0
1-826947-0
2-826631-0
2-826947-0
5-826631-0
5-826947-0
B=8.0 F=4.4
Part Number
Plating A
Plating B
826654-2
826951-2
826654-3
826951-3
826654-4
826951-4
826654-5
826951-5
826654-6
826951-6
826654-7
826951-7
826654-8
826951-8
826654-9
826951-9
1-826654-0
1-826951-0
2-826654-0
2-826951-0
5-826654-0
5-826951-0
For part numbers of positions not shown, please combine dash numbers appropriately
MOD II Low Cost Line Breakaway Pin Headers
Right Angle, Double Row 0.63mm Square Post
Specification:
Mating Connectors:
Housing
- Green polyester, glass filled,
UL 94V-0 rated
Posts
- Phosphor bronze, plated as follows:
Plating A
- Contact Zone (Area F) 0.8 μm
gold over 1.3 μm nickel
HV100 PCB Receptacles - Pages 24-28
HV190 PCB Receptacles - Page 29
MOD IV Receptacle Housings - Page 34
- Soldering Zone 3 μm min. tin
over 1.3 μm nickel
Plating B
- 2 μm min. tin over 1.3 μm nickel
Technical Documents:
Product Specification -108-18012
No. of
Positions
2x2
2x3
2x4
2x5
2x6
2x7
2x8
2x9
2x10
2x20
2x50
B=5.8 F=4.4
Part Number
Plating A
826662-2
826662-3
826662-4
826662-5
826662-6
826662-7
826662-8
826662-9
1-826662-0
2-826662-0
5-826662-0
Plating B
826955-2
826955-3
826955-4
826955-5
826955-6
826955-7
826955-8
826955-9
1-826955-0
2-826955-0
5-826955-0
B=6.7 F=5.5
Part Number
Plating A
826634-2
826634-3
826634-4
826634-5
826634-6
826634-7
826634-8
826634-9
1-826634-0
2-826634-0
5-826634-0
Plating B
826953-2
826953-3
826953-4
826953-5
826953-6
826953-7
826953-8
826953-9
1-826953-0
2-826953-0
5-826953-0
B=8.0 F=4.4
Part Number
Plating A
826664-2
826664-3
826664-4
826664-5
826664-6
826664-7
826664-8
826664-9
1-826664-0
2-826664-0
5-826664-0
Plating B
826957-2
826957-3
826957-4
826957-5
826957-6
826957-7
826957-8
826957-9
1-826957-0
2-826957-0
5-826957-0
For part numbers of positions not shown, please combine dash numbers appropriately
19
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System
MOD II Economy Line Breakaway Pin Headers
Straight, Single Row 0.63mm Square Post
Specification:
Mating Connectors:
Housing
- Green polyester, glass filled,
UL 94V-0 rated
Posts
- Phosphor bronze, plated as follows:
Plating A
- Contact Zone (Area F) 0.8 μm gold
over 1.3 μm nickel
MOD IV Receptacle Housings - Page 34
- Soldering Zone 2.5 μm min. tin
over 1.3 μm nickel
Plating B
- 2 μm min. tin over 1.3 μm nickel
Technical Documents:
Product Specification - 108-18012
A=12.7 C=3.2
Part Number
Plating A
Plating B
825433-2
828214-2
825433-3
828214-3
825433-4
828214-4
825433-5
828214-5
825433-6
828214-6
825433-7
828214-7
825433-8
828214-8
825433-9
828214-9
1-825433-0
1-828214-0
2-825433-0
2-828214-0
5-825433-0
5-828214-0
No. of
Positions
2
3
4
5
6
7
8
9
10
20
50
A=15.2 C=5.7
Part Number
Plating A
Plating B
825434-2
827312-2
825434-3
827312-3
825434-4
827312-4
825434-5
827312-5
825434-6
827312-6
825434-7
827312-7
825434-8
827312-8
825434-9
827312-9
1-825434-0
1-827312-0
2-825434-0
2-827312-0
5-825434-0
5-827312-0
A=20.3 C=10.8
Part Number
Plating A
Plating B
825435-2
827313-2
825435-3
827313-3
825435-4
827313-4
825435-5
827313-5
825435-6
827313-6
825435-7
827313-7
825435-8
827313-8
825435-9
827313-9
1-825435-0
1-827313-0
2-825435-0
2-827313-0
5-825435-0
5-827313-0
For part numbers of positions not shown, please combine dash numbers appropriately
MOD II Economy Line Breakaway Pin Headers
Straight, Double Row 0.63mm Square Post
Specification:
Mating Connectors:
Housing
- Green polyester, glass filled,
UL 94V-0 rated
Posts
- Phosphor bronze, plated as follows:
Plating A
- Contact Zone (Area F) 0.8 μm gold
over 1.3 μm nickel
MOD IV Receptacle Housings - Page 34
- Soldering Zone 2.5 μm min. tin
over 1.3 μm nickel
Plating B
- 2 μm min. tin over 1.3 μm nickel
Technical Documents:
Product Specification -108-18012
No. of
Positions
2x2
2x3
2x4
2x5
2x6
2x7
2x8
2x9
2x10
2x20
2x50
Part Number
Plating A
825440-2
825440-3
825440-4
825440-5
825440-6
825440-7
825440-8
825440-9
1-825440-0
2-825440-0
5-825440-0
Plating B
828213-2
828213-3
828213-4
828213-5
828213-6
828213-7
828213-8
828213-9
1-828213-0
2-828213-0
5-828213-0
For part numbers of positions not shown, please combine dash numbers appropriately
20
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System
MOD II Economy Line Breakaway Pin Headers
Right Angle, Single Row 0.63mm Square Post
Specification:
Mating Connectors:
Housing
- Green polyester, glass filled,
UL 94V-0 rated
MOD IV Receptacle Housings - Page 34
Posts
- Phosphor bronze, plated as follows:
Plating
- Contact Zone (Area F) 0.8 μm gold
over 1.3 μm nickel
- Soldering Zone 2 μm min. tin
over 1.3 μm nickel
Technical Documents:
Product Specification - 108-18012
No. of
Positions
2
3
4
5
6
7
8
9
10
20
50
Part
Number
825437-2
825437-3
825437-4
825437-5
825437-6
825437-7
825437-8
825437-9
1-825437-0
2-825437-0
5-825437-0
For part numbers of positions not shown, please combine dash numbers appropriately
MOD II Economy Line Breakaway Pin Headers
Right Angle, Double Row 0.63mm Square Post
Mating Connectors:
Specification:
MOD IV Receptacle Housings - Page 34
Housing
- Green polyester, glass filled,
UL 94V-0 rated
Posts
- Phosphor bronze, plated as follows:
Plating
- Contact Zone (Area F) 0.8 μm gold
over 1.3 μm nickel
- Soldering Zone 2 μm min. tin
over 1.3 μm nickel
Technical Documents:
Product Specification -108-18012
No. of
Positions
2x2
2x3
2x4
2x5
2x6
2x7
2x8
2x9
2x10
2x20
2x50
Part
Number
825457-2
825457-3
825457-4
825457-5
825457-6
825457-7
825457-8
825457-9
1-825457-0
2-825457-0
5-825457-0
For part numbers of positions not shown, please combine dash numbers appropriately
21
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System
MOD II Surface Mount Breakaway Pin Headers
Straight, Single Row 0.63mm Square Post - End Stackable
Specification:
Mating Connectors:
Housing and
- PCT GV Black
pick & place cap
HV100 PCB Receptacles - Pages 24-28
HV190 PCB Receptacles - Page 29
MOD IV Receptacle Housings - Page 34
Posts
- Phosphor bronze, plated as follows:
- Contact Zone (Area F) 0.8 μm gold
over 1.3 μm nickel
- Soldering Zone 2.5 μm min. tin
over 1.3 μm nickel
Packaging
- Tape & reel
Technical Documents:
Product Specification - 108-18012
No. of
Positions
3
4
5
6
7
8
9
10
17
Dimension
A
7.62
10.16
12.70
15.24
17.78
20.32
22.86
25.40
43.18
B
5.08
7.62
10.16
12.70
15.24
17.78
20.32
22.86
40.64
Part
Number
1241150-3
1241150-4
1241150-5
1241150-6
1241150-7
1241150-8
1241150-9
1-1241150-0
1-1241150-7
For part numbers of positions not shown, please combine dash numbers appropriately
MOD II Surface Mount Breakaway Pin Headers
Straight, Double Row 0.63mm Square Post - End Stackable
Specification:
Mating Connectors:
Housing and
- PCT GV Black
pick & place cap
HV100 PCB Receptacles - Pages 24-28
HV190 PCB Receptacles - Page 29
MOD IV Receptacle Housings - Page 34
Posts
- Phosphor bronze, plated as follows:
- Contact Zone (Area F) 0.8 μm gold
over 1.3 μm nickel
- Soldering Zone 2.5 μm min. tin
over 1.3 μm nickel
Packaging
- Tape & reel
Technical Documents:
Product Specification -108-18012
No. of
Positions
2x2
2x3
2x4
2x5
2x6
2x7
2x8
2x9
2x10
2x17
Dimension
A
5.08
7.62
10.16
12.70
15.24
17.78
20.32
22.86
25.40
43.18
B
2.54
5.08
7.62
10.16
12.70
15.24
17.78
20.32
22.86
40.64
Part
Number
1241050-2
1241050-3
1241050-4
1241050-5
1241050-6
1241050-7
1241050-8
1241050-9
1-1241050-0
1-1241050-7
For part numbers of positions not shown, please combine dash numbers appropriately
22
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System
MOD II ACTION PIN Breakaway Pin Headers
Straight 0.63mm Square Post
Specification:
Mating Connectors:
Housing
- Polyester, glass filled, green
UL 94V-0 rated
Posts
- Phosphor bronze, plated as follows:
Plating A
- Contact Zone (Area F) 0.1 μm gold,
over 0.7 μm palladium alloy, over
1.27 μm nickel
Plating B
HV100 PCB Receptacles - Pages 24-28
HV190 PCB Receptacles - Page 29
MOD IV Receptacle Housings - Page 34
- Action Pin Zone 2 μm min. tin
over 1.27 μm nickel
Technical Documents:
- Tin over 1.27 μm nickel
Product Specification - 108-18012
Single Row
Double Row
No. of
Positions
2
3
4
5
6
7
8
9
10
20
50
Dimension
A
B
5.08
2.54
7.62
5.08
10.16
7.62
12.70
10.16
15.24
12.70
17.78
15.24
20.32
17.78
22.86
20.32
25.40
22.86
50.80
48.26
127.00
124.46
Part Number
Plating A
Plating B
966575-2
966573-2
966575-3
966573-3
966575-4
966573-4
966575-5
966573-5
966575-6
966573-6
966575-7
966573-7
966575-8
966573-8
966575-9
966573-9
1-966575-0
1-966573-0
2-966575-0
2-966573-0
5-966575-0
5-966573-0
No. of
Positions
2x2
2x3
2x4
2x5
2x6
2x7
2x8
2x9
2x10
2x20
2x50
Dimension
A
B
5.08
2.54
7.62
5.08
10.16
7.62
12.70
10.16
15.24
12.70
17.78
15.24
20.32
17.78
22.86
20.32
25.40
22.86
50.80
48.26
127.00
124.46
Part Number
Plating A
Plating B
966574-2
966572-2
966574-3
966572-3
966574-4
966572-4
966574-5
966572-5
966574-6
966572-6
966574-7
966572-7
966574-8
966572-8
966574-9
966572-9
1-966574-0
1-966572-0
2-966574-0
2-966572-0
5-966574-0
5-966572-0
For part numbers of positions not shown, please combine dash numbers appropriately
MOD II ACTION PIN Posts
0.64mm Square Post
Technical Documents:
Specification:
Posts
- Phosphor bronze
Plating A
- Contact Zone (Area F) 0.8 μm gold,
over 1.2 μm nickel
Product Specification - 108-18012
Application Specification - 114-25011
- Action Pin Zone 1.3 μm min. tin
over 1.2 μm nickel
Plating B
- Contact Zone (Area F) 1 μm min.
tin over 1.2 μm nickel
- Action Pin Zone 5 μm min. tin
over 1.2 μm nickel
A
4.8
8.5
8.0
6.7
8.5
Dimension
F
4.8
8.5
8.0
6.7
6.0
L
6.8
10.0
12.0
8.25
10.0
Plating
Plating A
Plating A
Plating A
Plating B
Plating B
Part Number
Strip Form
1-928776-5
1-928776-4
1-928776-3
3-928776-2
3-928776-4
Section A-B
Other post lengths and finishes on request
For application tooling please see page 49
23
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System
HV-100 Receptacles, Vertical PCB Mount
Single Row, Kinked Legs with Retention Feature - Top Entry
Specification:
Mating Connectors:
Housing
- Polyester, glass filled, green
UL 94V-0 rated
MOD II Pin Headers - Pages 18-19 & 22-23
Contacts
- Phosphor bronze, plated as follows:
Plating A
- Contact Zone 0.8 μm gold over
1.3 μm nickel
(N x 2,54)
- Soldering Zone 2.5 μm tin over
1.3 μm nickel
(N–1) x 2,54
2,52
2,54
Plating B
- 2.5 μm tin
2,2
C
Technical Documents:
Product Specification - 108-19056
3,1
C=6.2
Part Number
No. of
Positions
2
3
4
5
6
7
8
9
10
20
36
Plating A
829094-2
829094-3
829094-4
829094-5
829094-6
829094-7
829094-8
829094-9
1-829094-0
2-829094-0
3-829094-6
C=7.0
Part Number
Plating B
829411-2
829411-3
829411-4
829411-5
829411-6
829411-7
829411-8
829411-9
1-829411-0
2-829411-0
3-829411-6
Plating A
215297-2
215297-3
215297-4
215297-5
215297-6
215297-7
215297-8
215297-9
1-215297-0
2-215297-0
3-215297-6
Plating B
215298-2
215298-3
215298-4
215298-5
215298-6
215298-7
215298-8
215298-9
1-215298-0
2-215298-0
3-215298-6
C=8.5
Part Number
Plating A
215299-2
215299-3
215299-4
215299-5
215299-6
215299-7
215299-8
215299-9
1-215299-0
2-215299-0
3-215299-6
Plating B
215300-2
215300-3
215300-4
215300-5
215300-6
215300-7
215300-8
215300-9
1-215300-0
2-215300-0
3-215300-6
For part numbers of positions not shown, please combine dash numbers appropriately
HV-100 Receptacles, Vertical PCB Mount
Double Row, Kinked Legs with Retention Feature - Top Entry
Specification:
Mating Connectors:
Housing
- Polyester, glass filled, green
UL 94V-0 rated
Contacts
- Phosphor bronze, plated as follows:
Plating A
- Contact Zone 0.8 μm gold over
1.3 μm nickel
MOD II Pin Headers - Pages 18-19 & 22-23
- Soldering Zone 2.5 μm tin over
1.3 μm nickel
Plating B
- 2.5 μm tin
2,2
Technical Documents:
Product Specification - 108-19056
No. of
Positions
2x2
2x3
2x4
2x5
2x6
2x7
2x8
2x9
2x10
2x20
2x36
C=6.2
Part Number
Plating A
Plating B
829095-2
829410-2
829095-3
829410-3
829095-4
829410-4
829095-5
829410-5
829095-6
829410-6
829095-7
829410-7
829095-8
829410-8
829095-9
829410-9
1-829095-0
1-829410-0
2-829095-0
2-829410-0
3-829095-6
3-829410-6
C=7.0
Part Number
Plating A
Plating B
215307-2
215308-2
215307-3
215308-3
215307-4
215308-4
215307-5
215308-5
215307-6
215308-6
215307-7
215308-7
215307-8
215308-8
215307-9
215308-9
1-215307-0
1-215308-0
2-215307-0
2-215308-0
3-215307-6
3-215308-6
C=8.5
Part Number
Plating A
Plating B
215309-2
215310-2
215309-3
215310-3
215309-4
215310-4
215309-5
215310-5
215309-6
215310-6
215309-7
215310-7
215309-8
215310-8
215309-9
215310-9
1-215309-0
1-215310-0
2-215309-0
2-215310-0
3-215309-6
3-215310-6
For part numbers of positions not shown, please combine dash numbers appropriately
24
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System
HV-100 Receptacles, Vertical PCB Mount, Sealed
Single Row, Kinked Legs with Retention Feature - Top Entry
Specification:
Mating Connectors:
Housing
- Polyester, glass filled, green
UL 94V-0 rated
Contacts
- Phosphor bronze, plated as follows:
Plating A
- Contact Zone 0.8 μm gold over
1.3 μm nickel
MOD II Pin Headers - Pages 18-19 & 22-23
- Soldering Zone 2.5 μm tin over
1.3 μm nickel
Plating B
- 2.5 μm tin
Technical Documents:
Product Specification - 108-19056
No. of
Positions
2
3
4
5
6
7
8
9
10
20
36
C=7.0
Part Number
Plating A
215301-2
215301-3
215301-4
215301-5
215301-6
215301-7
215301-8
215301-9
1-215301-0
2-215301-0
3-215301-6
C=8.5
Part Number
Plating B
215302-2
215302-3
215302-4
215302-5
215302-6
215302-7
215302-8
215302-9
1-215302-0
2-215302-0
3-215302-6
Plating A
215303-2
215303-3
215303-4
215303-5
215303-6
215303-7
215303-8
215303-9
1-215303-0
2-215303-0
3-215303-6
Plating B
215304-2
215304-3
215304-4
215304-5
215304-6
215304-7
215304-8
215304-9
1-215304-0
2-215304-0
3-215304-6
For part numbers of positions not shown, please combine dash numbers appropriately
HV-100 Receptacles, Vertical PCB Mount, Sealed
Double Row, Kinked Legs with Retention Feature - Top Entry
Specification:
Mating Connectors:
Housing
- Polyester, glass filled, green
UL 94V-0 rated
Contacts
- Phosphor bronze, plated as follows:
Plating A
- Contact Zone 0.8 μm gold over
1.3 μm nickel
MOD II Pin Headers - Pages 18-19 & 22-23
- Soldering Zone 2.5 μm tin over
1.3 μm nickel
Plating B
- 2.5 μm tin
Technical Documents:
Product Specification - 108-19056
No. of
Positions
2x2
2x3
2x4
2x5
2x6
2x7
2x8
2x9
2x10
2x20
2x36
C=7.0
Part Number
Plating A
215311-2
215311-3
215311-4
215311-5
215311-6
215311-7
215311-8
215311-9
1-215311-0
2-215311-0
3-215311-6
C=8.5
Part Number
Plating B
215312-2
215312-3
215312-4
215312-5
215312-6
215312-7
215312-8
215312-9
1-215312-0
2-215312-0
3-215312-6
Plating A
215313-2
215313-3
215313-4
215313-5
215313-6
215313-7
215313-8
215313-9
1-215313-0
2-215313-0
3-215313-6
Plating B
215314-2
215314-3
215314-4
215314-5
215314-6
215314-7
215314-8
215314-9
1-215314-0
2-215314-0
3-215314-6
For part numbers of positions not shown, please combine dash numbers appropriately
25
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System
HV-100 Receptacles, Vertical PCB Mount
Single Row, Top or Bottom Entry
Specification:
Mating Connectors:
Housing
- Polyester, glass filled, green
UL 94V-0 rated
Contacts
- Phosphor bronze, plated as follows:
Plating A
- Contact Zone 0.8 μm gold over
1.3 μm nickel
MOD II Pin Headers - Pages 18-19 & 22-23
- Soldering Zone 2.5 μm tin over
1.3 μm nickel
Plating B
- 2.5 μm tin
Technical Documents:
Product Specification - 108-19056
No. of
Positions
2
3
4
5
6
7
8
9
10
20
36
Dimension
A
B
5.08
2.54
7.62
5.08
10.16
7.62
12.70
10.16
15.24
12.70
17.78
15.24
20.32
17.78
22.86
20.32
25.40
22.86
50.80
48.26
91.44
88.90
Part Number
Plating A
Plating B
215305-2
215306-2
215305-3
215306-3
215305-4
215306-4
215305-5
215306-5
215305-6
215306-6
215305-7
215306-7
215305-8
215306-8
215305-9
215306-9
1-215305-0
1-215306-0
2-215305-0
2-215306-0
3-215305-6
3-215306-6
For part numbers of positions not shown, please combine dash numbers appropriately
HV-100 Receptacles, Vertical PCB Mount
Double Row, Top or Bottom Entry
Specification:
Mating Connectors:
Housing
- Polyester, glass filled, green
UL 94V-0 rated
Contacts
- Phosphor bronze, plated as follows:
Plating A
- Contact Zone 0.8 μm gold over
1.3 μm nickel
MOD II Pin Headers - Pages 18-19 & 22-23
- Soldering Zone 2.5 μm tin over
1.3 μm nickel
Plating B
- 2.5 μm tin
Technical Documents:
Product Specification - 108-19056
No. of
Positions
2x2
2x3
2x4
2x5
2x6
2x7
2x8
2x9
2x10
2x20
2x36
Dimension
A
B
5.08
2.54
7.62
5.08
10.16
7.62
12.70
10.16
15.24
12.70
17.78
15.24
20.32
17.78
22.86
20.32
25.40
22.86
50.80
48.26
91.44
88.90
Part Number
Plating A
Plating B
215315-2
215316-2
215315-3
215316-3
215315-4
215316-4
215315-5
215316-5
215315-6
215316-6
215315-7
215316-7
215315-8
215316-8
215315-9
215316-9
1-215315-0
1-215316-0
2-215315-0
2-215316-0
3-215315-6
3-215316-6
For part numbers of positions not shown, please combine dash numbers appropriately
26
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System
HV-100 Receptacles, Vertical PCB Mount
Single Row, Top or Bottom Entry
Specification:
Mating Connectors:
Housing
- Polyester, glass filled, green
UL 94V-0 rated
Contacts
- Phosphor bronze, plated as follows:
Plating A
- Contact Zone 0.8 μm gold over
1.3 μm nickel
MOD II Pin Headers - Pages 18-19 & 22-23
- Soldering Zone 2.5 μm tin over
1.3 μm nickel
Plating B
- 2.5 μm tin
Technical Documents:
Product Specification - 108-19056
No. of
Positions
2
3
4
5
6
7
8
9
10
20
36
Dimension
A
B
5.08
2.54
7.62
5.08
10.16
7.62
12.70
10.16
15.24
12.70
17.78
15.24
20.32
17.78
22.86
20.32
25.40
22.86
50.80
48.26
91.44
88.90
Part Number
Plating A
Plating B
829265-2
829575-2
829265-3
829575-3
829265-4
829575-4
829265-5
829575-5
829265-6
829575-6
829265-7
829575-7
829265-8
829575-8
829265-9
829575-9
1-829265-0
1-829575-0
2-829265-0
2-829575-0
3-829265-6
3-829575-6
For part numbers of positions not shown, please combine dash numbers appropriately
HV-100 Receptacles, Vertical PCB Mount
Double Row, Top or Bottom Entry
Specification:
Mating Connectors:
Housing
- Polyester, glass filled, green
UL 94V-0 rated
Contacts
- Phosphor bronze, plated as follows:
Plating A
- Contact Zone 0.8 μm gold over
1.3 μm nickel
MOD II Pin Headers - Pages 18-19 & 22-23
- Soldering Zone 2.5 μm tin over
1.3 μm nickel
Plating B
- 2.5 μm tin
Technical Documents:
Product Specification - 108-19056
No. of
Positions
2x2
2x3
2x4
2x5
2x6
2x7
2x8
2x9
2x10
2x20
2x36
Dimension
A
B
5.08
2.54
7.62
5.08
10.16
7.62
12.70
10.16
15.24
12.70
17.78
15.24
20.32
17.78
22.86
20.32
25.40
22.86
50.80
48.26
91.44
88.90
Part Number
Plating A
Plating B
829264-2
829576-2
829264-3
829576-3
829264-4
829576-4
829264-5
829576-5
829264-6
829576-6
829264-7
829576-7
829264-8
829576-8
829264-9
829576-9
1-829264-0
1-829576-0
2-829264-0
2-829576-0
3-829264-6
3-829576-6
For part numbers of positions not shown, please combine dash numbers appropriately
27
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System
HV-100 Surface Mount Receptacles, Vertical PCB Mount
Single Row, Top or Bottom Entry - End Stackable
Specification:
Mating Connectors:
Housing and
- Liquid Crystal Polymer (LCP), black,
pick & place cap UL 94V-0 rated
MOD II Pin Headers - Pages 18-19 & 22-23
Contacts
- Phosphor bronze, plated as follows:
Plating A
- Contact Zone 0.8 μm gold over
1.3 μm nickel
- Soldering Zone 2.5 μm tin over
1.3 μm nickel
Plating B
- 2.5 μm tin
Packaging
- Tape and reel
Technical Documents:
Product Specification - 108-19056
No. of
Positions
3
4
5
6
7
8
9
10
11
12
Dimension
A
B
7.62
5.08
10.16
7.62
12.70
10.16
15.24
12.70
17.78
15.24
20.32
17.78
22.86
20.32
25.40
22.86
27.94
25.40
30.48
27.94
A
Part Number
Plating A
Plating B
1241152-3
1355344-3
1241152-4
1355344-4
1241152-5
1355344-5
1241152-6
1355344-6
1241152-7
1355344-7
1241152-8
1355344-8
1241152-9
1355344-9
1-1241152-0
1-1355344-0
1-1241152-1
1-1355344-1
1-1241152-2
1-1355344-2
2,52 Ref.
2,54
2,2
6,2
0,7
0,5
5,08
B
Pos. 1
For part numbers of positions not shown, please combine dash numbers appropriately
HV-100 Surface Mount Receptacles, Vertical PCB Mount
Double Row, Top or Bottom Entry - End Stackable
Specification:
Mating Connectors:
Housing and
- Liquid Crystal Polymer (LCP), black,
pick & place cap UL 94V-0 rated
MOD II Pin Headers - Pages 18-19 & 22-23
Contacts
- Phosphor bronze, plated as follows:
Plating A
- Contact Zone 0.8 μm gold over
1.3 μm nickel
- Soldering Zone 2.5 μm tin over
1.3 μm nickel
Plating B
- 2.5 μm tin
Packaging
- Tape and reel
Technical Documents:
Product Specification -108-19056
No. of
Positions
2x2
2x3
2x4
2x5
2x6
2x7
2x8
2x9
2x10
2x20
Dimension
A
B
5.08
2.54
7.62
5.08
10.16
7.62
12.70
10.16
15.24
12.70
17.78
15.24
20.32
17.78
22.86
20.32
25.40
22.86
50.80
48.26
Part Number
Plating A
Plating B
969973-2
1355347-2
969973-3
1355347-3
969973-4
1355347-4
969973-5
1355347-5
969973-6
1355347-6
969973-7
1355347-7
969973-8
1355347-8
969973-9
1355347-9
1-969973-0
1-1355347-0
2-969973-0
2-1355347-0
For part numbers of positions not shown, please combine dash numbers appropriately
A
5,06 Ref.
2,54
2,2
6,2
0,7
0,5
7,62
B
28
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System
HV-190 Receptacles, Horizontal PCB Mount
Single Row, Side Entry - End Stackable
Specification:
Mating Connectors:
Housing
- Polyester, glass filled, green
UL 94V-0 rated
Contacts
- Phosphor bronze, plated as follows:
Plating A
- Contact Zone 0.8 μm gold over
1.3 μm nickel
MOD II Pin Headers - Pages 18-19 & 22-23
- Soldering Zone 2.5 μm tin over
1.3 μm nickel
Plating B
- 2.5 μm tin
Technical Documents:
Product Specification -108-19072
No. of
Positions
2
3
4
5
6
7
8
9
10
20
36
Dimension
A
B
5.08
2.54
7.62
5.08
10.16
7.62
12.70
10.16
15.24
12.70
17.78
15.24
20.32
17.78
22.86
20.32
25.40
22.86
50.80
48.26
91.44
88.90
Part Number
Plating A
Plating B
216602-2
216601-2
216602-3
216601-3
216602-4
216601-4
216602-5
216601-5
216602-6
216601-6
216602-7
216601-7
216602-8
216601-8
216602-9
216601-9
1-216602-0
1-216601-0
2-216602-0
2-216601-0
3-216602-6
3-216601-6
For part numbers of positions not shown, please combine dash numbers appropriately
HV-190 Receptacles, Horizontal PCB Mount
Double Row, Side Entry - End Stackable
Specification:
Mating Connectors:
Housing
- Polyester, glass filled, green
UL 94V-0 rated
Contacts
- Phosphor bronze, plated as follows:
Plating A
- Contact Zone 0.8 μm gold over
1.3 μm nickel
MOD II Pin Headers - Pages 18-19 & 22-23
- Soldering Zone 2.5 μm tin over
1.3 μm nickel
Plating B
- 2.5 μm tin
Technical Documents:
Product Specification - 108-19072
No. of
Positions
2x2
2x3
2x4
2x5
2x6
2x7
2x8
2x9
2x10
2x20
2x36
Dimension
A
B
5.08
2.54
7.62
5.08
10.16
7.62
12.70
10.16
15.24
12.70
17.78
15.24
20.32
17.78
22.86
20.32
25.40
22.86
50.80
48.26
91.44
88.90
Part Number
Plating A
Plating B
216604-2
216603-2
216604-3
216603-3
216604-4
216603-4
216604-5
216603-5
216604-6
216603-6
216604-7
216603-7
216604-8
216603-8
216604-9
216603-9
1-216604-0
1-216603-0
2-216604-0
2-216603-0
3-216604-6
3-216603-6
For part numbers of positions not shown, please combine dash numbers appropriately
29
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System
MOD II High Temperature Shrouded Headers
Straight, Single Row 0.63mm Round Post
Specification:
Mating Connectors:
Housing
- Polyester for high operating temp.
(PCT), black, glass fibre filled
Posts
- Phosphor bronze, (Plating A) or
brass (Plating B) plated as follows:
Plating A
- Contact Zone (Area F) 0.1 μm gold over
0.7 μm palladium alloy, over 1.3 μm nickel
MOD IV Receptacle Housings - Page 32
- Soldering Zone 2 μm min. tin over
1.3 μm nickel
Plating B
- 2 μm min. tin over 1.3 μm nickel
Technical Documents:
Product Specification - 108-18012
No. of
Positions
3
4
5
6
7
8
9
10
20
50
Dimension
A
B
7.62
5.08
10.16
7.62
12.70
10.16
15.24
12.70
17.78
15.24
20.32
17.78
22.86
20.32
25.40
22.86
50.80
48.26
127.00
124.46
Part Number
Plating A
Plating B
826467-3
827295-3
826467-4
827295-4
826467-5
827295-5
826467-6
827295-6
826467-7
827295-7
826467-8
827295-8
826467-9
827295-9
1-826467-0
1-827295-0
2-826467-0
2-827295-0
5-826467-0
5-827295-0
For part numbers of positions not shown, please combine dash numbers appropriately
MOD II High Temperature Shrouded Headers
Straight, Double Row 0.63mm Round Post
Specification:
Mating Connectors:
Housing
- Polyester for high operating temp.
(PCT), black, glass fibre filled
Posts
- Phosphor bronze, (Plating A) or
brass (Plating B) plated as follows:
Plating A
- Contact Zone (Area F) 0.1 μm gold over
0.7 μm palladium alloy, over 1.3 μm nickel
MOD IV Receptacle Housings - Page 32
- Soldering Zone 2 μm min. tin over
1.3 μm nickel
Plating B
- 2 μm min. tin over 1.3 μm nickel
Technical Documents:
Product Specification - 108-18012
No. of
Positions
2x3
2x4
2x5
2x6
2x7
2x8
2x9
2x10
2x20
2x50
Dimension
A
B
7.62
5.08
10.16
7.62
12.70
10.16
15.24
12.70
17.78
15.24
20.32
17.78
22.86
20.32
25.40
22.86
50.80
48.26
127.00
124.46
Part Number
Plating A
Plating B
826469-3
827297-3
826469-4
827297-4
826469-5
827297-5
826469-6
827297-6
826469-7
827297-7
826469-8
827297-8
826469-9
827297-9
1-826469-0
1-827297-0
2-826469-0
2-827297-0
5-826469-0
5-827297-0
For part numbers of positions not shown, please combine dash numbers appropriately
30
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System
MOD II High Temperature Shrouded Headers
Right Angle, Single Row 0.63mm Round Post
Specification:
Mating Connectors:
Housing
- Polyester for high operating temp.
(PCT), black, glass fibre filled
Posts
- Phosphor bronze, (Plating A) or
brass (Plating B) plated as follows:
Plating A
- Contact Zone (Area F) 0.1 μm gold over
0.7 μm palladium alloy, over 1.3 μm nickel
MOD IV Receptacle Housings - Page 32
- Soldering Zone 2 μm min. tin over
1.3 μm nickel
Plating B
- 2 μm min. tin over 1.3 μm nickel
Technical Documents:
Product Specification - 108-18012
No. of
Positions
3
4
5
6
7
8
9
10
20
50
Dimension
A
B
7.62
5.08
10.16
7.62
12.70
10.16
15.24
12.70
17.78
15.24
20.32
17.78
22.86
20.32
25.40
22.86
50.80
48.26
127.00
124.46
Part Number
Plating A
Plating B
826468-3
827296-3
826468-4
827296-4
826468-5
827296-5
826468-6
827296-6
826468-7
827296-7
826468-8
827296-8
826468-9
827296-9
1-826468-0
1-827296-0
2-826468-0
2-827296-0
5-826468-0
5-827296-0
For part numbers of positions not shown, please combine dash numbers appropriately
MOD II High Temperature Shrouded Headers
Right Angle, Double Row 0.63mm Round Post
Specification:
Mating Connectors:
Housing
- Polyester for high operating temp.
(PCT), black, glass fibre filled
Posts
- Phosphor bronze, (Plating A) or
brass (Plating B) plated as follows:
Plating A
- Contact Zone (Area F) 0.1 μm gold over
0.7 μm palladium alloy, over 1.3 μm nickel
MOD IV Receptacle Housings - Page 32
- Soldering Zone 2 μm min. tin over
1.3 μm nickel
Plating B
- 2 μm min. tin over 1.3 μm nickel
Technical Documents:
Product Specification - 108-18012
No. of
Positions
2x3
2x4
2x5
2x6
2x7
2x8
2x9
2x10
2x20
2x50
Dimension
A
B
7.62
5.08
10.16
7.62
12.70
10.16
15.24
12.70
17.78
15.24
20.32
17.78
22.86
20.32
25.40
22.86
50.80
48.26
127.00
124.46
Part Number
Plating A
Plating B
826470-3
827298-3
826470-4
827298-4
826470-5
827298-5
826470-6
827298-6
826470-7
827298-7
826470-8
827298-8
826470-9
827298-9
1-826470-0
1-827298-0
2-826470-0
2-827298-0
5-826470-0
5-827298-0
For part numbers of positions not shown, please combine dash numbers appropriately
31
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System
MOD IV Receptacle Housings
Single Row
Specification:
Housing
Mating Connectors:
- Polyester (PBT) black, glass fibre filled
MOD II High Temp Shrouded
Headers - Pages 30-31
Technical Documents:
Product Specification - 108-25007
- 108-25020
- 108-25021
Application Specification - 114-25003
No. of
Positions
3
4
5
6
7
8
9
10
20
36
Dimension
A
7.62
10.16
12.70
15.24
17.78
20.32
22.86
25.40
50.80
91.44
B
5.08
7.62
10.16
12.70
15.24
17.78
20.32
22.86
48.26
88.90
Part
Number
926475-3
926475-4
926475-5
926475-6
926475-7
926475-8
926475-9
1-926475-0
2-926475-0
3-926475-6
For part numbers of positions not shown, please combine dash numbers appropriately
MOD IV Receptacle Housings
Double Row
Specification:
Housing
Mating Connectors:
- Polyester (PBT) black, glass fibre filled
MOD II High Temp Shrouded
Headers - Pages 30-31
Technical Documents:
Product Specification - 108-25007
- 108-25020
- 108-25021
Application Specification - 114-25003
No. of
Positions
2x3
2x4
2x5
2x6
2x7
2x8
2x9
2x10
2x20
2x36
Dimension
A
7.62
10.16
12.70
15.24
17.78
20.32
22.86
25.40
50.80
91.44
B
5.08
7.62
10.16
12.70
15.24
17.78
20.32
22.86
48.26
88.90
Part
Number
926476-3
926476-4
926476-5
926476-6
926476-7
926476-8
926476-9
1-926476-0
2-926476-0
3-926476-6
For part numbers of positions not shown, please combine dash numbers appropriately
32
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System
MOD IV Accessories
Specification:
For use with:
Retention Plugs - Polycarbonate, glass fibre filled
Keying Plug
MOD IV Receptacle Housings - Page 32
- Polyamide 6.6 glass fibre filled
Retention Plug
with Strain Relief
Colour
Black
Green
Red
Retention Plug
without Strain Relief
Retention Plug
with Strain Relief
926478-1
926478-2
926478-3
Part Number
Retention Plug
without Strain Relief
926477-1
926477-2
926477-3
Keying
Plug
Keying
Plug
926498-1
926498-2
926498-3
33
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System
MOD IV Receptacle Housings
Single Row, with and without Strain Relief
Specification:
Housing
Mating Connectors:
- Green polyamide,
6.6 UL 94V-HB rated
With strain relief MOD II Pin Headers - Pages 20-21
Without strain relief MOD II Pin Headers - Pages 18-19 & 22-23
Technical Documents:
Product Specification - 108-25007
- 108-25020
- 108-25021
Application Specification - 114-25003
with Strain Relief
No. of
Positions
2
3
4
5
6
7
8
9
10
20
50
With Strain Relief
925369-2
925369-3
925369-4
925369-5
925369-6
925369-7
925369-8
925369-9
1-925369-0
2-925369-0
5-925369-0
Part Number
Without Strain Relief
925366-2
925366-3
925366-4
925366-5
925366-6
925366-7
925366-8
925366-9
1-925366-0
2-925366-0
5-925366-0
without Strain Relief
For part numbers of positions not shown, please combine dash numbers appropriately
Keying Plug - Green
Keying Plug - Red
926519-2
1-926519-2
MOD IV Receptacle Housings
Double Row, with and without Strain Relief
Specification:
Housing
Mating Connectors:
- Green polyamide,
6.6 UL 94V-HB rated
With strain relief MOD II Pin Headers - Pages 20-21
Without strain relief MOD II Pin Headers - Pages 18-19 & 22-23
Technical Documents:
Product Specification - 108-25007
- 108-25020
- 108-25021
Application Specification - 114-25003
with Strain Relief
No. of
Positions
2x2
2x3
2x4
2x5
2x6
2x7
2x8
2x9
2x10
2x20
2x50
Part Number
With Strain Relief
Without Strain Relief
925370-2
925367-2
925370-3
925367-3
925370-4
925367-4
925370-5
925367-5
925370-6
925367-6
925370-7
925367-7
925370-8
925367-8
925370-9
925367-9
1-925370-0
1-925367-0
2-925370-0
2-925367-0
5-925370-0
5-925367-0
without Strain Relief
For part numbers of positions not shown, please combine dash numbers appropriately
Keying Plug - Green
Keying Plug - Red
926519-2
1-926519-2
34
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System
MOD IV/V Crimp Snap-In Receptacle Contacts
with Insulation Support
Specification:
For use with:
Material
- Phosphor bronze, plated as follows:
Plating A
- Selectively plated 0.8 μm gold on
contact area, gold flash on crimp area,
with entire contact underplated
1.3 μm nickel
Plating B
- Selectively plated 0.8 μm gold on
contact area, with gold flash over
1.3 μm nickel on entire contact
Plating C
- Selectively plated 0.8 μm gold on
contact area, tin plated on crimp area,
with entire contact underplated
1.3 μm nickel
Plating D
- Plated 2 μm tin
MOD IV Receptacle Housings Pages 32 & 34
Technical Documents:
Related Products:
Product Specification - 108-25020
MOD IV Standard Contact Pressure
Extraction Tool - 843473-1
- 108-25021
MOD IV Intermediate Contact Pressure
- 108-25007
MOD V High Contact Pressure
Application Specification -114-25003
MOD IV Receptacle Contacts with Standard Contact Pressure
Wire Size Range
mm2
AWG
Insulation Diameter
(Max) mm
0.032-0.09
32-28
1.2
0.2-0.56
24-20
0.14-0.12*
26
* Consult Tyco Electronics for this wire size range
1.4
Part Number
Version
Reel
Loose Piece
Reel
Loose Piece
Plating A
167020-1
167023-1
167300-8
141603-4
Plating B
167020-2
167023-2
167300-6
141603-3
MOD IV Receptacle Contacts with Intermediate Contact Pressure
Wire Size Range
mm2
AWG
Insulation Diameter
(Max) mm
0.032-0.09
32-28
1.2
0.2-0.56
24-20
0.14-0.12*
26
* Consult Tyco Electronics for this wire size range
1.4
Version
Reel
Loose Piece
Reel
Loose Piece
Plating A
167021-1
167024-1
2-167301-4
1-141708-2
Part Number
Plating B
167021-2
167024-2
167301-4
141708-1
Plating D
167021-3
167024-3
2-167301-2
1-141708-1
Plating B
167022-2
167025-2
166309-2
166310-2
Part Number
Plating C
167022-1
167025-1
–
–
Plating D
167022-3
167025-3
166309-3
166310-3
MOD V Receptacle Contacts with High Contact Pressure
Wire Size Range
mm2
AWG
Insulation Diameter
(Max) mm
0.032-0.09
32-28
1.2
0.2-0.56
24-20
0.14-0.12*
26
* Consult Tyco Electronics for this wire size range
1.4
Version
Reel
Loose Piece
Reel
Loose Piece
For application tooling please see page 49
35
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU 2.54mm Centreline Interconnection System
MOD II PCB Mount Receptacle Contacts
Specification:
Material
Mating Connectors:
- Phosphor bronze
MOD II Pin Headers - Pages 18-19 & 22-23
Technical Documents:
Application Specification - 114-25004
Post Entry
with Solder Stop Area
Type A
Post Entry
with Solder Stop Area
Type B
Part Number
Type B
Type C
On Reel
Loose Piece
On Reel
Loose Piece
On Reel
Loose Piece
85861-3
–
–
–
5-85863-3
5-85866-3
167651-1
–
167652-1
–
–
–
85861-4
–
–
85865-4
5-85863-4
5-85866-4
–
–
–
–
141579-2
141579-4
* In the duplex gold plated version, the rest of the receptacle is nickel plated, the solder tabs are tin plated
Type A
Keying Plug
Post Entry
Type C
Plating
(Contact Zone)
Galvanised tin plated
Tin plated with solder stop area
0.8 μm Au over 1.3 μm Ni
Duplex 0.8 μm Au over 1.3 μm Ni*
86286-1
MOD IV Shunt Connectors
Specification:
For use with:
Housing
- Thermoplastic Polyester
UL 94V-0 rated
Contact
- Beryllium Copper
Plating A
- 0.4 μm gold over 1.3 μm nickel
Plating B
- 1 μm gold over 1.3 μm nickel
Plating C
- 2.5 μm tin
Strip Form
Loose Piece
Plating A
Green
142270-1
827914-1
Part Number
Plating B
Green
142270-5
–
MOD II Pin Headers Pages 18-19 & 22-23
Plating C
Black
142270-3
827914-3
36
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU Locking Clip Connectors
Product Facts
■
Self retaining contact system
■
Rapid installation
■
Connection to 0.63 x 0.63 or 0.79 x 1.57mm posts
■
Flame retardant thermoplastic housings are UL 94V-0 rated
■
Tin or gold plated contacts
Specification:
Current Rating
- 3 A (0.63 x 0.63mm posts)
5 A (0.79 x 1.57mm posts)
Operating Temperature
- -65 to +105°C (gold plating)
-65 to +85°C ( tin plating)
Contact Resistance
- 12mΩ max (gold plating)
16mΩ max (tin plating)
Insulation Resistance
- 5000 MΩ min
Locking clip connectors provide reliable and secure low cost connection for a variety of applications. Designed to mate with 0.63mm x 0.63mm or 0.79mm x
1.57mm header posts, these connectors provide permanent connection integrity with quick connect/disconnect flexibility. Their self-retaining contacts allow
rapid installation without the need for additional fastening to hold contacts and/or connector housings in place. When installed, locking clip connectors are
positively locked and cannot be detached by pulling on the wires. Removal of a connector is however simply achieved by pulling directly on the housing,
deflecting the contact springs within the connector and releasing the posts. For non-housed individual contacts, disconnection is achieved through the use of
an inexpensive extraction tool.
Locking Clip Receptacle Housings
Available in single and double row variants, housings accept the range of locking clip contacts for secure connection of multiple circuits. Stackable open
ended housings permit a number of connectors to be placed side by side without loss of pitch.
Locking Clip Receptacle Contacts
Suitable for installation into Locking Clip housings or for individual wire connection, crimp snap-in contacts are offered for wire size ranges 20-30 AWG
(0.05mm2 to 0.56mm2) and with a choice of gold or tin plating. Contacts provide lasting high contact to post retention and are available in both
loose piece, and reeled format for efficient volume production.
37
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU Locking Clip Connectors
Locking Clip Receptacle Housings
Single Row, for 0.63mm Square Posts
Specification:
Housing
Mating Connectors:
- Thermoplastic Polyester GV,
Black, UL 94V-0 Rated
MOD II Pin Headers - Pages 18-19 & 22-23
Technical Documents:
Product Specification - 108-36028 & 108-36028-1
Application Specification - 114-25006
Both Ends Closed Housings
No. of
Cavities
1
2
3
4
5
6
7
8
9
10
Stackable Side Open Housings
Dimension
A
2.9
5.5
8.1
10.6
13.2
15.7
18.3
20.8
23.3
25.9
B
–
2.54
5.08
7.62
10.16
12.70
15.24
17.78
20.32
22.86
Keying Plug
Part
Number
926010-1
926657-2
926657-3
926657-4
926657-5
926657-6
926657-7
926657-8
926657-9
1-926657-0
No. of
Cavities
–
2
3
4
5
6
7
8
9
10
926329-1
Keying Plug
Dimension
B
–
2.54
5.08
7.62
10.16
12.70
15.24
17.78
20.32
22.86
Part
Number
–
5-926657-2
5-926657-3
5-926657-4
5-926657-5
5-926657-6
5-926657-7
5-926657-8
5-926657-9
6-926657-0
926329-1
Locking Clip Receptacle Housings
Double Row, for 0.63mm Square Posts
Specification:
Housing
Mating Connectors:
- Thermoplastic Polyester GV,
Black, UL 94V-0 Rated
MOD II Pin Headers - Pages 18-19 & 22-23
Technical Documents:
Product Specification - 108-36028 & 108-36028-1
Application Specification - 114-25006
Both Ends Closed Housings
No. of
Cavities
2x2
2x3
2x4
2x5
2x6
2x7
2x8
2x9
2x10
Keying Plug
Stackable Side Open Housings
Dimension
A
5.5
8.1
10.6
13.2
15.7
18.3
20.8
23.3
25.9
B
2.54
5.08
7.62
10.16
12.70
15.24
17.78
20.32
22.86
Part
Number
926209-2
926209-3
926209-4
926209-5
926209-6
926209-7
926209-8
926209-9
1-926209-0
No. of
Cavities
2x2
2x3
2x4
2x5
2x6
2x7
2x8
2x9
2x10
926329-1
Keying Plug
Dimension
B
2.54
5.08
7.62
10.16
12.70
15.24
17.78
20.32
22.86
Part
Number
5-926209-2
5-926209-3
5-926209-4
5-926209-5
5-926209-6
5-926209-7
5-926209-8
5-926209-9
6-926209-0
926329-1
38
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU Locking Clip Connectors
Locking Clip Crimp Snap-In Receptacle Contacts
for 0.63mm Square Posts
Specification:
For use with:
Material
- Phosphor bronze
Spring
- Stainless steel
Locking Clip Receptacle Housings - Page 38
Plating A
- Selectively plated 0.8 μm gold on
contact area, with gold flash over
1.3 μm nickel on entire contact
Plating B
- 2.5 μm tin over 1.3 μm nickel on
entire contact
Related Products:
Extraction Tool - 91084-1
Technical Documents:
Product Specification - 108-36028 & 108-36028-1
Application Specification - 114-25006
Wire Size Range
mm2
AWG
Insulation Diameter
mm
0.05-0.09
30-28
0.7-1.0
0.12-0.40
26-22
1.0-1.6
0.5-0.6
20
1.0-1.6
Part Number
Finish
Plating A
Plating B
Plating A
Plating B
Plating A
Plating B
On Reel
87190-1
5-87190-2
87124-1
5-87124-2
867052-2
5-867052-1
Loose Piece
87191-1
5-87191-2
87165-1
5-87165-2
–
–
For application tooling please see page 49
39
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU Locking Clip Connectors
Locking Clip Receptacle Housings
Single Row, for 0.79 x 1.57mm Posts
Specification:
Housing
Mating Connectors:
- Polyamide GV, Black,
UL 94V-0 Rated
MOD I Unshrouded Headers - Page 9
Technical Documents:
Product Specification - 108-36029
Application Specification - 114-25008
No. of
Positions
1
2
3
4
5
6
7
8
9
10
A
–
–
3.96
3.96
7.92
7.92
11.90
11.90
15.84
15.84
Dimension
B
–
–
3.96
7.92
7.92
11.90
11.90
15.84
15.84
19.81
Part
Number
87270-1
87270-2
1-87270-3
87270-4
1-87270-4
87270-5
1-87270-5
87270-6
1-87270-6
87270-7
C
5.08
9.55
13.51
17.48
21.44
25.40
29.36
33.32
37.28
41.24
Locking Clip Crimp Snap-In Receptacle Contacts
for 0.79 x 1.57mm Posts
Specification:
Material
- Phosphor bronze
Spring
- Stainless steel
Plating A
- Selectively plated 0.4 μm gold on contact
area, with gold flash over 1.3 μm nickel on
entire contact
Plating B
- 2.5 μm tin over 1.3 μm nickel on
entire contact
Related Products:
Extraction Tool - 91104-1
Technical Documents:
Product Specification - 108-36029
Application Specification - 114-25008
Wire Size Range
mm2
AWG
Insulation Diameter
mm
0.3-0.9
22-18
1.3-2.5
Part Number
Finish
Plating A
Plating B
On Reel
87269-2
5-87269-1
Loose Piece
87278-2
5-87278-1
For application tooling please see page 49
40
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
HE 13 / HE 14 - 2.54mm Centreline Interconnection System
Product Facts
■
Receptacle assemblies preloaded with Insulation Displacement
Contacts (IDC) to terminate discrete wires or 2.54mm centreline
ribbon cable
■
Receptacle housings accept crimp snap-in contacts to terminate
discrete wires
■
Headers provided for straight or right-angle mounting to be soldered
onto 1.6mm printed circuit boards
■
Protective header shrouds feature an integrated detent latching device
■
Compliant to the CEI IEC 603-8 International Standard
Specification:
Current Rating
Contact Resistance
- 3 A max at 20°C
- 20 mΩ max (HE 13)
- 30 mΩ max (HE 14)
Dielectric Withstanding Voltage
- 1000 V rms (HE 13)
- 500 V rms (HE 14)
Insulation Resistance
- 5000 MΩ (HE 13)
- 1000 MΩ (HE 14)
Operating Temperature
- -55°C to +125°C (HE 13)
- -40°C to +100°C (HE 14)
Durability
- 400 cycles (HE 13)
- 30 cycles (HE 14)
Insertion/Withdrawal Force
- 1.5 N max per contact + latching force (HE 13)
- 3 N max per contact + latching force (HE 14)
A multi-contact connector range designed to reliably meet todays interconnection requirements for signal transmission in a variety of computer,
telecommunications and industrial applications.
Complying fully with the CEI IEC 603-8 international standard, this wire-to-board interconnection system is composed of IDC receptacle assemblies for discrete
wires or ribbon cable, receptacle housings for crimp snap-in receptacle contacts, and vertical or right-angle shrouded and polarised board-mount headers.
All products are available with a choice of gold (HE 13) or tin (HE 14) plating finishes.
41
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
HE 13 / HE 14 - 2.54mm Centreline Interconnection System
IDC Receptacle Assemblies
Straight Single Row
Specification:
Mating Connectors:
Housing
- Blue flame retardant glass filled
polyester, UL 94V-0 rated
Contacts
- Phosphor bronze, plated as follows:
HE 13
- Selectively plated 0.4 μm gold on
contact area, 0.8 μm tin min on
termination area with entire
contact underplated 1.3 μm nickel
- Plated 1 μm min. tin
HE 14
HE 13 / HE 14 Shrouded Headers Pages 44-45
Technical Documents:
Product Specification - 108-15053
Application Specification - 114-15031
No. of
Positions
2
3
4
5
6
8
10
12
15
18
Part Number - HE 13
28-26 AWG
26-24 AWG
Loose Piece
Loose Piece
281787-2
281784-2
281787-3
281784-3
281787-4
281784-4
281787-5
281784-5
281787-6
281784-6
281787-8
281784-8
1-281787-0
1-281784-0
1-281787-2
1-281784-2
1-281787-5
1-281784-5
1-281787-8
1-281784-8
Dimension
A
2.54
5.08
7.62
10.16
12.70
17.78
22.86
27.94
35.56
43.18
B
5.88
8.42
10.96
13.50
16.04
21.12
26.20
31.28
38.90
46.52
Part Number - HE 14
28-26 AWG
26-24 AWG
Loose Piece
Loose Piece
281786-2
281783-2
281786-3
281783-3
281786-4
281783-4
281786-5
281783-5
281786-6
281783-6
281786-8
281783-8
1-281786-0
1-281783-0
1-281786-2
1-281783-2
1-281786-5
1-281783-5
1-281786-8
1-281783-8
IDC Receptacle Assemblies
Straight Double Row
Specification:
Mating Connectors:
Housing
- Blue flame retardant glass filled
polyester, UL 94V-0 rated
Contacts
- Phosphor bronze, plated as follows:
HE 13
- Selectively plated 0.4 μm gold on
contact area, 0.8 μm tin min on
termination area with entire
contact underplated 1.3 μm nickel
- Plated 1 μm min. tin
HE 14
HE 13 / HE 14 Shrouded Headers Pages 44-45
Technical Documents:
Product Specification - 108-15053
Application Specification - 114-15031
No. of
Positions
2x2
2x3
2x4
2x5
2x6
2x8
2x10
2x12
2x15
2x18
Dimension
A
2.54
5.08
7.62
10.16
12.70
17.78
22.86
27.94
35.56
43.18
B
5.88
8.42
10.96
13.50
16.04
21.12
26.20
31.28
38.90
46.52
Part Number - HE 13
28-26 AWG
26-24 AWG
Loose Piece
Loose Piece
281793-2
281790-2
281793-3
281790-3
281793-4
281790-4
281793-5
281790-5
281793-6
281790-6
281793-8
281790-8
1-281793-0
1-281790-0
1-281793-2
1-281790-2
1-281793-5
1-281790-5
1-281793-8
1-281790-8
Part Number - HE 14
28-26 AWG
26-24 AWG
Loose Piece
Loose Piece
281792-2
281789-2
281792-3
281789-3
281792-4
281789-4
281792-5
281789-5
281792-6
281789-6
281792-8
281789-8
1-281792-0
1-281789-0
1-281792-2
1-281789-2
1-281792-5
1-281789-5
1-281792-8
1-281789-8
42
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
HE 13 / HE 14 - 2.54mm Centreline Interconnection System
IDC Receptacle Assemblies
Right Angle Single Row
Specification:
Mating Connectors:
HE 13 / HE 14 Shrouded Headers Pages 44-45
Housing
- Blue flame retardant glass filled
polyester, UL 94V-0 rated
Contacts
- Phosphor bronze, plated as follows:
HE 13
- Selectively plated 0.4 μm gold on
contact area, 0.8 μm tin min on
termination area with entire
contact underplated 1.3 μm nickel
- Plated 1 μm min. tin
HE 14
Technical Documents:
Product Specification - 108-15053
Application Specification - 114-15030
HE 13
No. of
Dimension
Positions
A
2
2.54
3
5.08
4
7.62
5
10.16
6
12.70
7
15.24
8
17.78
10
22.86
12
27.94
15
35.56
18
43.18
Receptacles for 28 AWG wire available on request
B
5.88
8.42
10.96
13.50
16.04
18.58
21.12
26.20
31.28
38.90
46.52
Part Number
26 AWG
Tube
Loose Piece
281712-2
144274-2
281712-3
144274-3
281712-4
144274-4
281712-5
144274-5
281712-6
144274-6
281712-7
144274-7
281712-8
144274-8
1-281712-0
1-144274-0
1-281712-2
1-144274-2
1-281712-5
1-144274-5
1-281712-8
1-144274-8
B
5.88
8.42
10.96
13.50
16.04
18.58
21.12
26.20
31.28
38.90
46.52
Tube
281711-2
281711-3
281711-4
281711-5
281711-6
281711-7
281711-8
1-281711-0
1-281711-2
1-281711-5
1-281711-8
Part Number
24 AWG
Tube
Loose Piece
281709-2
144273-2
281709-3
144273-3
281709-4
144273-4
281709-5
144273-5
281709-6
144273-6
281709-7
144273-7
281709-8
144273-8
1-281709-0
1-144273-0
1-281709-2
1-144273-2
1-281709-5
1-144273-5
1-281709-8
1-144273-8
HE 14
No. of
Dimension
Positions
A
2
2.54
3
5.08
4
7.62
5
10.16
6
12.70
7
15.24
8
17.78
10
22.86
12
27.94
15
35.56
18
43.18
Receptacles for 28 AWG wire available on request
Part Number
26 AWG
Loose Piece
144271-2
144271-3
144271-4
144271-5
144271-6
144271-7
144271-8
1-144271-0
1-144271-2
1-144271-5
1-144271-8
Part Number
24 AWG
Loose Piece
144270-2
144270-3
144270-4
144270-5
144270-6
144270-7
144270-8
1-144270-0
1-144270-2
1-144270-5
1-144270-8
Tube
281708-2
281708-3
281708-4
281708-5
281708-6
281708-7
281708-8
1-281708-0
1-281708-2
1-281708-5
1-281708-8
43
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
HE 13 / HE 14 - 2.54mm Centreline Interconnection System
Shrouded Headers
Straight 0.63mm Square Post
Specification:
Mating Connectors:
Housing
- Blue flame retardant high
temperature nylon, UL 94V-0 rated
HE 13 / HE 14 IDC Receptacles Pages 42-43
Posts
- Phosphor bronze, plated as follows:
HE 13
- Selectively plated 0.4 μm gold on
contact area, gold flash on insertion
area, 2.5 μm tin min on solder tail
with entire post underplated
1.3 μm nickel
- Tin plated min. 2.5 μm on solder
area, with entire post tin plated
0.8 μm over 0.8 μm nickel
HE 13 / HE 14 Receptacle Housings
- Page 46
HE 14
Technical Documents:
Product Specification - 108-15053
Double Row
Single Row
No. of
Positions
2
3
4
5
6
7
8
10
12
15
18
Dimension
A
2.54
5.08
7.62
10.16
12.70
15.24
17.78
22.86
27.94
35.56
43.18
B
5.08
7.62
10.16
12.70
15.24
17.78
20.32
25.40
30.48
38.10
45.72
Single Row
Type / Part Number
HE 13
HE 14
281696-2
281695-2
281696-3
281695-3
281696-4
281695-4
281696-5
281695-5
281696-6
281695-6
281696-7
281695-7
281696-8
281695-8
1-281696-0
1-281695-0
1-281696-2
1-281695-2
1-281696-5
1-281695-5
1-281696-8
1-281695-8
Double Row
Type / Part Number
HE 13
HE 14
281740-2
281739-2
281740-3
281739-3
281740-4
281739-4
281740-5
281739-5
281740-6
281739-6
–
–
281740-8
281739-8
1-281740-0
1-281739-0
1-281740-2
1-281739-2
1-281740-5
1-281739-5
1-281740-8
1-281739-8
44
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
HE 13 / HE 14 - 2.54mm Centreline Interconnection System
Shrouded Headers
Right Angle 0.63mm Square Post
Specification:
Mating Connectors:
Housing
- Blue flame retardant high
temperature nylon, UL 94V-0 rated
HE 13 / HE 14 IDC Receptacles Pages 42-43
Posts
- Phosphor bronze, plated as follows:
HE 13
- Selectively plated 0.4 μm gold on
contact area, gold flash on insertion
area, 2.5 μm tin min on solder tail
with entire post underplated
1.3 μm nickel
- Tin plated min. 2.5 μm on solder
area, with entire post tin plated
0.8 μm over 0.8 μm nickel
HE 13 / HE 14 Receptacle Housings Page 46
HE 14
Technical Documents:
Product Specification - 108-15053
Double Row
Single Row
No. of
Positions
2
3
4
5
6
7
8
10
12
15
18
Dimension
A
2.54
5.08
7.62
10.16
12.70
15.24
17.78
22.86
27.94
35.56
43.18
B
5.08
7.62
10.16
12.70
15.24
17.78
20.32
25.40
30.48
38.10
45.72
Single Row
Type / Part Number
HE 13
HE 14
281699-2
281698-2
281699-3
281698-3
281699-4
281698-4
281699-5
281698-5
281699-6
281698-6
281699-7
281698-7
281699-8
281698-8
1-281699-0
1-281698-0
1-281699-2
1-281698-2
1-281699-5
1-281698-5
1-281699-8
1-281698-8
Double Row
Type / Part Number
HE 13
HE 14
281743-2
281742-2
281743-3
281742-3
281743-4
281742-4
281743-5
281742-5
281743-6
281742-6
–
–
281743-8
281742-8
1-281743-0
1-281742-0
1-281743-2
1-281742-2
1-281743-5
1-281742-5
1-281743-8
1-281742-8
45
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
HE 13 / HE 14 - 2.54mm Centreline Interconnection System
Receptacle Housings
Single and Double Row
Specification:
Housing
Mating Connectors:
HE 13 / HE 14 Shrouded Headers Pages 44-45
- Blue flame retardant glass filled
polyester, UL 94V-0 rated
Technical Documents:
Product Specification - 108-15053
Double Row
Single Row
No. of
Positions
3
4
5
6
7
8
10
12
15
18
Dimension
A
5.08
7.62
10.16
12.70
15.24
17.78
22.86
27.94
35.56
43.18
Part Number
B
7.62
10.16
12.70
15.24
17.78
20.32
25.40
30.48
38.10
45.72
Single Row
281838-3
281838-4
281838-5
281838-6
281838-7
281838-8
1-281838-0
1-281838-2
1-281838-5
1-281838-8
Double Row
281839-3
281839-4
281839-5
281839-6
281839-7
281839-8
1-281839-0
1-281839-2
1-281839-5
1-281839-8
Crimp Snap-In Receptacle Contacts
with Insulation Support
Specification:
Material
- Phosphor bronze, plated as follows:
HE 13
- Selectively plated 0.8 μm gold on contact
area, 2.5 μm tin on crimp area, with entire
contact underplated 1.3 μm nickel
HE 14
- Plated 2.5 μm tin
Technical Documents:
Product Specification - 108-15053
Wire Size Range
mm2
AWG
Insulation Diameter
mm
0.22-0.08
24-28
1.5-0.8
Part Number
Plating
HE 13
HE 14
Strip Form
188746-1
188744-1
Loose Piece
182734-3
182734-2
46
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU Interconnection System
Engineering Notes
47
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU Interconnection System
Engineering Notes
48
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU Interconnection System
Application Tooling
Tooling and equipment options are many, varied and are continually improved.
Visit our Application Tooling website at www.tooling.tycoelectronics.com/europe
Save it as one of your favourites!
Helping yourself
■ If you are new to referencing our Terminals / Contacts to hand tools, we
strongly recommend that you read our one page guide to selecting the
right tool in our online hand tool catalogue.
APPLICATION TOOLING
Find Equipment;
■ Generally there will be a Brochure that will show top-level information on
the range of equipment available for the category selected. Also flyers that
give more detailed information for each type of equipment listed in the
Brochure.
➞ by terminal PN
➞ for Wire and Crimp
Applications
➞ for PCB Processing
➞ by Product Type
➞ by Industry
➞ for Electrical Testing
■ On the Applicator and Hand Tool pages - you can search
on Terminal part number for tooling options
Or
by Tool part number for more product information
➞ How to purchase
➞ Finance
➞ Documentation
➞ Product Information Center
➞ Service & Repair
➞ Trade Shows
➞ Country Contracts
➞ Europe Tooling Home
Country Sites
➞ Americas
➞ Asia Pacific
➞ China
■ First select the category you are looking for from the left-hand menu-bar.
■ If you regularly need Hand Tool information, there is an online
Hand Tool Catalogue that is available to view or print, but can also be
printed and sent to you if more convenient. This catalogue is updated regularly,
so please ensure that your version is kept up to date.
■ Requesting assistance
If you can’t find what you are looking for, it does not necessarily mean that
there is nothing available for your application:
for cross-referencing information - contact one of our Product Information
Centres (PIC), listed when making a selection from the right-hand menu box:
for more complex equipment and technical help – find your country
contact by selecting from the right-hand menu box.
Local contact information is available for most countries in a one page pdf file
49
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU Interconnection System
Part Number Index
Part Number
Page Number
Part Number
Page Number
Part Number
Page Number
Part Number
Page Number
85861
36
215298
24
280512
12
281331
14
826654
Part Number
19
Page Number
85863
36
215299
24
280513
12
281332
14
826656
18
85865
36
215300
24
280514
12
281333
14
826658
18
85866
36
215301
25
280515
12
281334
14
826662
19
86181
7
215302
25
280520
15
281336
14
826664
19
86286
14, 36
215303
25
280521
15
281339
14
826853
9
86557
13
215304
25
280522
16
281340
14
826925
18
86561
13
215305
26
280523
16
281342
14
826926
18
87077
12
215306
26
280530
12
281349
14
826936
18
87116
6
215307
24
280578
14
281350
14
826938
18
87124
39
215308
24
280579
14
281351
14
826942
18
87165
39
215309
24
280580
14
281352
14
826944
18
87190
39
215310
24
280581
14
281353
14
826947
19
87191
39
215311
25
280582
14
281423
6
826949
19
87269
40
215312
25
280583
14
281556
12
826951
19
87270
40
215313
25
280585
14
281695
44
826953
19
87278
40
215314
25
280586
14
281696
44
826955
19
88048
13
215315
26
280590
6
281698
45
826957
19
141002
7
215316
26
280591
6
281699
45
827295
30
141003
7
216601
29
280592
6
281708
43
827296
31
141004
7
216602
29
280593
6
281709
43
827297
30
141007
7
216603
29
280594
6
281711
43
827298
31
141008
7
216604
29
280595
6
281712
43
827312
20
141009
7
280358
12
280609
8
281739
44
827313
20
141579
36
280359
12
280610
8
281740
44
827914
36
141584
7
280360
12
280611
8
281742
45
828213
20
141585
7
280361
12
280612
8
281743
45
828214
20
141586
7
280362
12
280613
8
281783
42
829094
24
141589
7
280363
12
280614
8
281784
42
829095
24
141590
7
280364
12
280615
8
281786
42
829264
27
141603
35
280365
12
280616
8
281787
42
829265
27
141708
35
280366
12
280617
8
281789
42
829410
24
142165
7
280368
12
280618
8
281790
42
829411
24
142166
7
280369
12
280619
8
281792
42
829575
27
142270
36
280370
15
280620
8
281793
42
829576
27
144270
43
280371
15
280621
6
281838
46
867052
39
144271
43
280372
15
280628
13
281839
46
925366
34
144273
43
280373
15
280629
13
281999
12
925367
34
144274
43
280374
15
280630
13
282790
16
925369
34
166309
35
280375
15
280631
13
282792
12
925370
34
166310
35
280376
15
280632
13
284123
12
926010
38
167020
35
280377
16
280633
13
284124
16
926209
38
167021
35
280378
16
280634
13
825433
20
926329
38
167022
35
280379
16
280635
13
825434
20
926475
32
167023
35
280380
16
280637
13
825435
20
926476
32
167024
35
280381
16
280638
13
825437
21
926477
33
167025
35
280382
16
280640
13
825440
20
926478
33
167300
35
280383
16
280702
6
825457
21
926498
33
167301
35
280384
15
280708
12
826467
30
926519
34
167651
36
280385
15
280709
12
826468
31
926657
38
167652
36
280387
15
280836
14
826469
30
928776
23
181270
12
280388
15
280851
14
826470
31
966572
23
181271
12
280389
16
280922
14
826539
9
966573
23
181299
6
280390
16
281018
12
826576
9
966574
23
182198
6
280392
16
281019
15
826629
18
966575
23
182206
12
280393
16
281021
16
826631
19
969973
28
182207
12
280422
12
281215
14
826632
18
1241050
22
182734
46
280508
15
281216
14
826634
19
1241150
22
188744
46
280509
15
281218
14
826646
18
1241152
28
188746
46
280510
16
281327
14
826648
18
1355344
28
215297
24
280511
16
281328
14
826652
19
1355347
28
50
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
AMPMODU Interconnection System
Global Contacts
Americas
Argentina – Buenos Aires
Phone:
+54-1-733-2000
Fax:
+54-1-717-0988
Chile – Santiago
Phone:
+56-2-739-1230
Fax:
+56-2-739-1227
Brasil – São Paulo
Phone: +55-11-2103-6000
Fax:
+55-11-2103-6200
Colombia – Bogota
Phone:
+57-1-231-9398
Fax:
+57-1-240-3769
Canada – Toronto
Phone: +905-475-6222
Fax:
+905-474-5520
Mexico – Mexico City
Phone: +52-5-729-0400
Fax:
+52-5-361-8545
United States
Harrisburg, PA
Phone:
+1-717-564-0100
Fax:
+1-717-986-7575
Troy, MI
Phone:
+1-248-273-3359
Fax:
+1-248-273-3322
Venezuela – Caracas
Phone:
+58-2-986-7774
Fax:
+58-2-986-9739
For Latin/South American
Countries not shown
Phone:
+54-11-4733-2015
Fax:
+54-11-4733-2083
Customer Service:
Phone:
+1-800-522-6752
Asia/Pacific
Australia – Sydney
Phone:
+61-2-9554-2600
Fax:
+61-2-9502-2556
Korea – Seoul
Phone:
+82-2-3415-4500
Fax:
+82-2-3486-3810
India – Bangalore
Phone:
+91-80-2854-0800
Fax:
+91-80-2854-0820
Malaysia – Selangor
Phone:
+60-3-7805-3055
Fax:
+60-3-7805-3066
Indonesia – Jakarta
Phone:
+62-21-526-7852
Fax:
+62-21-526-7856
New Zealand – Auckland
Phone:
+64-9-634-4580
Fax:
+64-9-634-4586
Japan – Kawasaki, Kanagawa
Phone:
+81-44-844-8111
Fax:
+81-44-812-3207
Philippines – Makati City
Phone:
+632-867-8641
Fax:
+632-867-8661
People’s Republic of China
Hong Kong
Phone:
+852-2735-1628
Fax:
+852-2735-0243
Shanghai
Phone:
+86-21-2407-1588
Fax:
+86-21-2407-1599
Singapore – Singapore
Phone:
+65-480-4525
Fax:
+65-482-1012
Taiwan – Taipei
Phone:
+886-2-2664-9977
Fax:
+886-2-2664-9900
Thailand – Bangkok
Phone:
+66-2-955-0500
Fax:
+66-2-955-0505
Vietnam – Ho Chi Minh City
Phone:
+84-8-930-4547
Fax:
+84-8-930-3443
Europe/ Middle East/Africa
Austria – Vienna
Phone: +43-1-905-60-0
Fax:
+43-1-905-60-1333
Product Information Center:
Phone: +43-1-905-60-1249
Fax:
+43-1-905-60-1251
Belgium – Kessel-Lo
Phone: +32-16-352-300
Fax:
+32-16-352-352
Bulgaria – Sofia
Phone: +359-2-971-2152
Fax:
+359-2-971-2153
Czech Republic – Kurim
Phone: +420-5-41-162-111
Fax:
+420-5-41-162-223
Product Information Center:
Phone: +420-5-41-162-113
Fax:
+420-5-41-162-132
Denmark – Glostrup
Phone: +45-43-480-452
Fax:
+45-43-441-414
Egypt – Cairo
Phone: +20-2-29-04-281
Fax:
+20-2-41-92-334
Finland – Helsinki
Phone: +358-95-12-34-20
Fax:
+358-95-12-34-250
France – Cergy-Pontoise Cedex
Phone: +33-1-3420-8888
Fax:
+33-1-3420-8600
Product Information Center:
Phone: +33-1-3420-8686
Fax:
+33-1-3420-8623
France Export Divisions –
Cergy-Pontoise Cedex
Phone: +33-1-3420-8866
Fax:
+33-1-3420-8300
Germany – Bensheim
Tyco Electronics AMP GmbH
Phone: +49-6251-133-0
Fax:
+49-6251-133-1600
Product Information Center:
Phone: +49-6251-133-1999
Fax:
+49-6251-133-1988
Germany – Niefern
Tyco Electronics pretema
GmbH & Co. KG
Phone: +49-7233-69-0
Fax:
+49-7233-69-100
Germany – Ottobrunn
Tyco Electronics Raychem GmbH
Phone: +49-89-6089-0
Fax:
+49-89-6096-345
Greece – Athens
Phone: +30-210-9370-396/397
Fax:
+30-210-9370-655
Hungary – Budapest
Phone: +36-1-289-1000
Fax:
+36-1-289-1010
Product Information Center:
Phone: +36-1-289-1016
Fax:
+36-1-289-1017
Ireland – Dublin
Phone: +353-1-820-3000
Fax:
+353-1-820-9790
Israel – Yokneam
Phone: +972-4-959-0508
Fax:
+972-4-959-0506
Italy – Collegno (Torino)
Phone: +39-011-4012-111
Fax:
+39-011-4031116
Product Information Center:
Phone: +39-011-4012-360
Fax:
+39-011-40287360
Lithuania – Vilnius
Phone: +370-5-2131-402
Fax:
+370-5-2131-403
Netherlands – ’s-Hertogenbosch
Phone: +31-73-6246-246
Fax:
+31-73-6212-365
Product Information Center:
Phone: +31-73-6246-999
Fax:
+31-73-6246-998
Norway – Nesbru
Phone: +47-66-77-88-86
Fax:
+47-66-77-88-55
Poland – Warsaw
Phone: +48-22-4576-700
Fax:
+48-22-4576-720
Product Information Center:
Phone: +48-22-4576-704
Fax:
+48-22-4576-720
Romania – Bucharest
Phone: +40-21-311-3479 + 3596
Fax:
+40-21-312-0574
Russia – Moscow
Phone: +7-495-926-55-06…09
Fax:
+7-495-926-55-05
Russia – St. Petersburg
Phone: +7-812-718-8192
Fax:
+7-812-718-8193
Slovenia – Ljubljana
Phone: +386-1561-3270
Fax:
+386-1561-3240
South Africa – Port Elizabeth
Phone: +2741-503-4500
Fax:
+2741-581-0440
Spain – Barcelona
Phone: +34-93-291-0330
Fax:
+34-93-201-7879
Sweden – Upplands Väsby
Phone: +46-8-50-72-50-00
Fax:
+46-8-50-72-50-01
Switzerland – Steinach
Phone: +41-71-447-0447
Fax:
+41-71-447-0444
Turkey – Istanbul
Phone: +90-212-281-8181…3
+90-212-282-5130/5430
Fax:
+90-212-281-8184
Ukraine – Kiev
Phone: +380-44-206-2265
Fax:
+380-44-206-2264
United Kingdom –
Swindon, Wiltshire
Phone: +44-8706-080-208
Fax:
+44-1793-572-109
Product Information Center:
Freephone GB: 0800-267-666
Phone: +44-208-420-8341
+44-208-420-8343
Fax:
+44-208-420-8081
51
Catalogue No. 1773393
November 2006
Dimensions are shown in mm
for reference purposes only.
Specifications subject to change.
www.tycoelectronics.com
Tyco Electronics UK Limited
Faraday Road, Dorcan, Swindon, Wiltshire. SN3 5HH
Phone: 08706 080208
Fax:
01793 572516
www.tycoelectronics.com
© 2006 Tyco International
1773393 Revised 11-2006
AMPMODU and TYCO are trademarks