3038-6000

Model 3038 Accelerometer Miniature Piezoresistive MEMS SMD Accelerometer Hermetically Sealed 10,000g Shock Protection The Model 3038 is a hermetically sealed SMD accelerometer designed for high performance applications. The accelerometer incorporates a gas-damped piezoresistive MEMS sensing element providing outstanding long-term stability. The model 3038 provides a millivolt output signal and features mechanical overload stops that provide shock protection to loads greater than 10,000g. dimensions FEATURES       ±50g to ±6000g Dynamic Ranges Board Mountable Accelerometer Low Power Consumption Hermetic LCC Package DC Response, Gas Damping 5000Hz Bandwidth APPLICATIONS       Harsh Environments Vibration & Shock Monitoring Impact Testing Embedded Applications Instrumentation Machinery Model 3038 Rev E 32 Journey Ste. 150 Aliso Viejo, CA 92656 www.meas-spec.com 949-716-5377 08/14/2013 t&m@meas-spec.com Model 3038 Accelerometer performance specifications All values are typical at +24°C, 100Hz and 5Vdc excitation unless otherwise stated. Measurement Specialties reserves the right to update and change these specifications without notice. Standard product parameters are described in PSC-1002 for Embedded DC Accelerometers. Parameters DYNAMIC Range (g) 1 Sensitivity (mV/g) Frequency Response (Hz) Natural Frequency (Hz) Non-Linearity (%FSO) Transverse Sensitivity (%) Damping Ratio 3 Shock Limit (g) ±50 1.0 0-1000 4000 ±1 100 10 Isolated from Mounting Surface Differential ENVIRONMENTAL Thermal Zero Shift (%FSO/°C) Thermal Sensitivity Shift (%/°C) Operating Temperature (°C) Compensated Temperature (°C) Storage Temperature (°C) Humidity -0.09 -0.15 -55 to 125 Uncompensated -55 to 125 Hermetically Sealed Typical Typical PHYSICAL Case Material Weight (grams) Mounting Ceramic 0.6 Solder 1 2 3 Notes ±100 0.50 0-1200 6000 ±1