318661-000

SPECIFICATION CONTROL DRAWING TITLE CTC-0041 Date TWO CONDUCTOR THERMOCOUPLE EXTENSION CABLE, SHIELDED, JACKETED Revision 5-5-10 F This specification sheet forms a part of the latest issue of Raychem Specification 55F. COMPONENT WIRES 1 of WTC-0064-AWG-WHITE (CHROMEL) 1 of WTC-0063-AWG-GREEN (ALUMEL) JACKET - RADIATION-CROSSLINKED, MODIFIED CONDUCTIVE ETFE COLOR - BLACK SHIELD - TIN-COATED COPPER CABLE CONSTRUCTION DETAILS JACKET THICKNESS (inches) OUTSIDE DIAMETER (inches) PART NUMBER 1/ CONDUCTOR SIZE (AWG) SHIELD SIZE (AWG) MINIMUM NOMINAL NOMINAL MAXIMUM MAXIMUM WEIGHT (lbs/1000 ft.) CTC-0041-22 22 38 .006 .008 .135 .142 16.1 CTC-0041-20 20 38 .006 .008 .151 .159 20.4 CTC-0041-16 16 38 .006 .008 .189 .198 32.9 CABLE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 150°C Maximum continuous conductor temperature CROSSLINKING PROOF TEST: 300 ± 3°C for 7 hours FLAMMABILITY: 3 seconds (maximum); 3 in. (maximum); no flaming of facial tissue FLUORIDE EXTRACTION: 70 ± 2° C for 168 hours, 250 ppm (maximum) JACKET ELONGATION AND TENSILE STRENGTH: Elongation, 50% (minimum) Tensile Strength, 3500 lbf/in² (minimum) JACKET FLAWS: Not Applicable LOW TEMPERATURE-COLD BEND: -65 ± 2°C for 4 hours SHIELD COVERAGE: 85% (minimum) VOLTAGE WITHSTAND (DIELECTRIC): Conductor to conductor and shield, 1500 volts (rms), 60 Hz VOLTAGE WITHSTAND (Post Environmental): Not Applicable The combination of the above thermoelements is referred to as Type KX per ANSI MC96.1. EMF shall be 4.00 mV (minimum), 4.19 mV (maximum), at 100°C with reference junction corrected to 0°C per ANSI MC96.1, and shall be performed on every length of finished cable. CHROMEL and ALUMEL are federally registered trademarks of Hoskins Manufacturing Company. Alternative conductors, exhibiting the same performance characteristics, may be substituted for one or both of the CHROMEL and ALUMEL conductors. Replaces EPD 6594 Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. COLOR CODES DESIGNATORS ARE NOT TO BE INCLUDED IN THE PART NUMBER DESCRIPTION. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. The TE logo, Tyco Electronics, Raychem, Alumel and Chromel are trademarks. Page 1 of 1 DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. Raychem Wire & Cable 501 Oakside Avenue Redwood City, CA 94063-3800 Phone: 1-800-227-8816 Fax: 1-650-361-6297 © 2009-2010 Tyco Electronics Corporation. All rights reserved.