3276210001

Wire and Harness ID Products Heat Shrink/Cable Markers TMS-SCE Military grade heat shrinkable wire identification sleeves TMS-SCE marker sleeves are designed to meet the wire and cable marking needs of manufacturers with high performance requirements. Made from durable, flame retarded, radiationcrosslinked heat-shrinkable polyolefin, TMS-SCE marker sleeves can be used in a wide variety of applications. The marker sleeves meet the performance requirements of SAE-AMS- DTL-23053/5 classes 1 and 3 and the TMS-SCE-2X products are made from tubing fully compliant with this specification. The marks are permanent immediately after printing and remain legible even when exposed to abrasion, aggressive cleaning solvents, and military fuels and oils. The sleeves meet the mark permanence requirements of SAE AS81531 4.6.2 and MIL-STD-202F both before and after shrinking. Both 2:1 and 3:1 shrink ratios are available. The 2:1 products provide a thick, rugged sleeve wall and are particularly easy to handle. The lightweight 3:1 products provide extremely fast shrinking and cover a wider range of wire diameters, thus simplifying inventory. The marker sleeves are designed to be printed by computer-driven dot matrix or thermal transfer printers, providing several advantages in terms of reduced errors, cycle time and cost. Supplied in a thin, flat “ladder” format, the sleeves are held horizontally between two hole-punched polyester strips. This configuration feeds directly from the storage box into a Tyco Electronics-recommended printer. Tyco Electronics-recommended ribbons should always be used. The ladder format provides automatic kitting of the marker sleeves in the desired sequence. A standard heat gun with reflector is used to shrink the sleeves onto the wire or cable. Temperature rating Operating temperature range –55°C to +135°C –67°F to +275°F Minimum recovery temperature +85°C +185°F Maximum storage temperature +40°C +104°F Specifications/approvals Tyco Electronics RW-2511 Military SAE-AMS-DTL-23053/5 classes1 and 3, Industry UL Recognized – Standard 224, file E35586 CSA Certified – File 31929 SAE AS81531 4.6.2, MIL-STD-202F Method 215J Printer information Tyco Electronics printer Features and benefits AM6310 (dot matrix) T200 Series (thermal transfer, low volume) Heat Shrink/Cable Markers T312M (thermal transfer) 4 n Permanent identification sleeves. n Computer-printable. TMS-101-RIBBON-4RPSCE (thermal transfer for T208M) n Lightweight for aerospace applications. TMS-RJS-RIBBON-4RPSCE (thermal transfer for T312M)) n Military specification material and print performance. n 2:1 and 3:1 shrink ratio. n CSA Certified. Part numbering system n UL Recognized, VW all flame tubing test rated. TMS-SCE - 2X -1K- 1/ 8 - 2.0-S1-9 n Quick recovery for heat sensitive areas. Tyco Electronics ribbon 1892BK04-RIBBON (dot matrix) Color Scoring (optional) Sleeve length (2.0" nominal) (omit for 2X) Inside diameter, as supplied (in inches) Standard Pack (1,000 pieces) 2X is optional (2:1 shrink ratio: if left out, product will be 3:1) will be 3:1) Product family Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Ordering information 50mm (nom) SOG-ER33-3 BT-M D SOG-ER32-3 BT-M d SOG-ER13-3 BT-M Available sizes and formats Inside diameter Expanded Recovered D (minimum) d (maximum) Ordering description Recommended use range Recovered wall thickness mm inches mm Weight mm inches mm inches (g/10 pcs.) TMS-SCE-1K- 3/32-2.0- 2.36 0.093 0.79 0.031 0.81 - 1.90 0.032 - 0.075 0.53 ± 0.08 0.021 ± 0.003 1.50 TMS-SCE-2X-1K- 3/32 - 2.36 0.093 1.17 0.046 1.27 - 1.90 0.050 - 0.075 0.64 ± 0.08 0.025 ± 0.003 2.04 TMS-SCE-1K- 1/8-2.0- 3.18 0.125 1.07 0.042 1.11 - 2.66 0.044 - 0.105 0.58 ± 0.08 0.023 ± 0.003 2.03 TMS-SCE-2X-1K- 1/8- 3.18 0.125 1.58 0.062 1.75 - 2.66 0.069 - 0.105 0.64 ± 0.08 0.025 ± 0.003 2.75 TMS-SCE-1K- 3/16-2.0- 4.75 0.187 1.57 0.062 1.75 - 4.06 0.069 - 0.160 0.58 ± 0.08 0.023 ± 0.003 2.68 inches TMS-SCE-2X-1K- 3/16- 4.75 0.187 2.36 0.093 2.54 - 4.06 0.100 - 0.160 0.64 ± 0.08 0.025 ± 0.003 3.62 TMS-SCE-1K- 1/4-2.0- 6.35 0.250 2.11 0.083 2.31 - 5.46 0.091 - 0.215 0.58 ± 0.08 0.023 ± 0.003 3.51 TMS-SCE-2X-1K- 1/4- 6.35 0.250 3.18 0.125 3.81 - 5.46 0.150 - 0.215 0.64 ± 0.08 0.025 ± 0.003 5.94 TMS-SCE-1K- 3/8-2.0- 9.53 0.375 3.18 0.125 3.47 - 8.12 0.137 - 0.320 0.61 ± 0.08 0.024 ± 0.003 5.04 TMS-SCE-2X-1K- 3/8- 9.53 0.375 4.75 0.187 5.59 - 8.12 0.220 - 0.320 0.64 ± 0.08 0.025 ± 0.003 8.50 TMS-SCE-1K- 1/2-2.0- 12.70 0.500 4.22 0.166 4.64 - 10.79 0.183 - 0.425 0.61 ± 0.08 0.024 ± 0.003 6.81 TMS-SCE-2X-1K- 1/2- 12.70 0.500 6.35 0.250 6.99 - 10.79 0.275 - 0.425 0.64 ± 0.08 0.025 ± 0.003 11.45 TMS-SCE-1K-- 3/4-2.0- 19.05 0.750 6.35 0.250 6.99 - 16.25 0.275 - 0.640 0.61 ± 0.08 0.024 ± 0.003 12.03 TMS-SCE-2X-1K- 3/4- 19.05 0.750 9.53 0.375 10.16 - 16.25 0.400 - 0.640 0.76 ± 0.08 0.030 ± 0.003 20.63 TMS-SCE-1K-1-2.0- 25.40 1.000 8.46 0.333 9.29 - 21.59 0.366 - 0.850 0.64 ± 0.08 0.025 ± 0.003 15.35 TMS-SCE-1K-11/2-2.0- 38.10 1.500 19.05 0.750 20.95 - 33.02 0.825 - 1.300 0.51 ± 0.08 0.020 ± 0.003 27.51 TMS-SCE-1K-2-2.0- 50.80 2.000 25.40 1.000 27.94 - 44.95 1.100 - 1.750 0.64 ± 0.08 0.025 ± 0.003 47.27 0.880 - 2.000 0.76 ± 0.08 0.030 ± 0.003 42.06 TMS-SCE-1K-21/4-2.0- 57.15 2.250 19.05 0.750 22.32 - 50.80 Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width. Options Prescoring Package sizes Colors Perforated score to produce multiple markers from each sleeve. Number of prescores 1 prescore 2 prescores 3 prescores Code S1 S2 S3 Standard 1K - 1000-piece packs Nonstandard Smaller and larger pack sizes are available. Please contact Tyco Electronics. Fanfolded Fanfolded option available for use with dot matrix printers Standard Yellow Code 4 9 Nonstandard Red Pink Orange Green Blue Violet Gray Black Code 2 2L 3 5 6 7 8 0 Note: print contrast. White 2X products meet the color requirements of MIL-STD-104 class 1; otherwise colors are pastel for Ordering information: Specify product name, pack size, sleeve size, prescore format, and color. Ordering example: TMS-SCE-1K-1/8-2.0-S1-9 (scored once) Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Wire and Harness ID Products TMS-SCE Military grade heat shrinkable wire identification sleeves (Cont’d) Heat Shrink/Cable Markers Heat Shrink/Cable Markers 5 Wire and Harness ID Products Heat Shrink/Cable Markers CM-SCE Polyolefin tie-on cable marker tags CM-SCE markers are flat, rigid, non-adhesive labels that can be used to identify large cables and wire bundles in environments such as military and aerospace. Marker tags are applied to cables or wire bundles with cable ties. Print performance meets or exceeds the requirements of SAE AS81531 4.6.2 and MIL-STD-202F. Features and benefits n Side entry provides access to big size and wire bundles as well as retrofit and repair capability. n Highly flame-retardant. n Highly resistant to abrasion, mechanical abuses, fluids, lubricants and solvents. n Ease of use: markers can be easily removed from the carrier. n Easy installation: only standard cable tie-wraps Temperature rating are needed to install markers. No extra steps required. n Operating temperature range –55°C to +135°C –67°F to +275°F Excellent print permanence when printing on the rough side of the marker. Specifications/approvals Tyco Electronics RW-2513 Military Mark permanence: SAE AS81531 4.6.2 Solvent resistance: MIL-STD-202F Method 215J Heat Shrink/Cable Markers Printer information 6 Tyco Electronics printer AM6310 (dot matrix) T312M (thermal transfer) Tyco Electronics ribbon 1892BK04-RIBBON (dot matrix) (dot matrix) 1966-RIBBON (thermal transfer) Part numbering system CM-SCE - 2.5K - 1/ 4 - 4H-9 Color Tie-wrap holes Markable height of marker (in.) Pack size Product family Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 CM-SCE Polyolefin tie-on cable marker tags (Cont’d) Ordering information Figure 1 CM-SCE- 1/4 INCH Available sizes and formats Ordering description Size Markable height Markable length mm inches /4 6.40 0.250 50.80 2.000 5.08 – 12.50 0.200 – 0.492 /4 6.40 0.250 50.80 2.000 5.08 – 12.50 0.200 – 0.492 /4 6.40 0.250 50.80 2.000 5.08 – 12.50 0.200 –0.492 /2 12.70 0.500 50.80 2.000 12.50 and up 0.492 and up /2 12.70 0.500 50.80 2.000 12.50 and up 0.492 and up /2 12.70 0.500 50.80 2.000 12.50 and up 0.492 and up /2 12.70 0.500 50.80 2.000 12.50 and up 0.492 and up CM-SCE- 1/4 -6H- 1 CM-SCE- 1/4 -4H- 1 CM-SCE -TP- 1/4 -4H- * 1 CM-SCE- 1/2 -4H- 1 CM-SCE-TP- 1/2 -4H- * 1 CM-SCE- 1/2 -6H- 1 CM-SCE-TP- 1/2 -6H- * 1 mm Recommended use range inches mm inches Wire and Harness ID Products Heat Shrink/Cable Markers * for thermal transfer printing Tie-wrap holes 1 Four holes standard 1 Four holes Six holes Code 4H 6H Code Fx (substitute package size code for “x”) /4 - inch tags /2 - inch tags Fanfold Package sizes Standard 250 pieces Colors Standard White Code 9 Nonstandard Yellow Code 4 Heat Shrink/Cable Markers Options Ordering information: Specify product name, markable height of marker, pack size, number of tie wraps and color. Ordering example: CM-SCE--2.5K -1/4 -4H-9 Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 7 Wire and Harness ID Products Heat Shrink/Cable Markers HS 2:1 Shrink ratio heat shrinkable wire identification system HS sleeves are thin wall, flame retarded radiation cross-linked polyolefin heat-shrinkable tubing, assembled as organized cut sleeves on a paper carrier. HS products are 2:1 shrink ratio. They are used in identification of wires and cables by computer-based printing onto sleeves. These products are suited to a wide variety of applications, including those with military standard requirements. The products meet the material and performance requirements of SAE AMS-DTL-23053/5 class 1. Features and benefits n n n n n n n n n Shrink ratio of 2:1 recovers to half of supplied diameter. Contact Tyco Electronics for 3:1 option. Comes in several sleeve lengths: 38mm, 50mm and 152mm. Sleeve diameter from 0.093" to 1.5" (2.4mm to 38.1mm). Flame retarded – meets ASTM D 2671 and UL 224 (clause 14) standards. Single sided and double sided printing formats available. Standard dot matrix printable. Contact Tyco Electronics for thermal printable options. Heat resistance: +175°C (+347°F) for 168 hours or +250°C (+482°F) for 4 hours with no deterioration of properties. Concentricity: 70% minimum for low distortion of legends. Easy-to-use fan-fold format for improved kitting and marker selection. Temperature rating Operating temperature range –55°C to +135°C –67°F to +275°F Minimum recovery temperature +120°C +248°F Maximum storage temperature +40°C +104°F Specifications/approvals Tyco Electronics TTDS-033 Military SAE AMS-DTL-23053/5 Class 1 (material and performance) SAE AS81531 4.6.2 MIL-STD-202F Method 215J Industry ASTM D 2671 UL 224 (clause 14) Heat Shrink/Cable Markers Printer information 8 Tyco Electronics printer AM6310 (dot matrix) Tyco Electronics ribbon 1892BK03 (dot matrix – high performance) 1892BK04 (dot matrix) Part numbering system HS -048 -YW -1- NF -050 -B Pack size Sleeve length (mm) Format Scoring Color Inside diameter as supplied (mm) Product family Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 HS 2:1 Shrink ratio heat shrinkable wire identification system (Cont’d) Ordering information Sleeve Length (nom) D d Available sizes and formats Inside diameter Ordering description D (min) As supplied d (max) After recovery mm inches HS024- 2.40 HS032- 3.20 Recommended use range Pack size (uncut sleeves) NF(B) DS(B) WF(B) inches 38 and 50mm lengths 1.27-1.90 0.050-0.075 1650 1100 N/A 1.75-2.66 0.069-0.105 1100 1100 550 2.54-4.06 0.100-0.160 1100 1100 500 3.81-5.46 0.150-0.215 550 550 500 0.187 5.59-8.12 0.220-0.320 550 550 275 6.35 0.250 6.99-10.79 0.275-0.425 550 300 250 mm inches 0.093 1.17 0.050 0.126 1.58 0.060 HS048- 4.80 0.189 2.36 0.090 HS064- 6.35 0.250 3.18 0.125 HS095- 9.53 0.374 4.75 HS127-12.70 0.500 HS190-19.05 mm 152 mm lengths 0.750 9.53 0.375 10.16-16.25 0.400-0.640 300 300 175 HS254-25.40 1.000 12.70 0.500 9.29-21.59 0.366-0.850 300 300 125 HS381-38.10 19.05 0.750 20.95-22.02 0.825-1.300 100 100 75 1.500 Wire and Harness ID Products Heat Shrink/Cable Markers Prescoring Perforated score to produce multiple marker sleeves from each HS. Number of prescores 0 prescores 1 prescore 2 prescores 3 prescores 5* prescores Markers per sleeve 1 2 3 4 6* Code 1 2 3 4 6* *Wide format only Package sizes Colors Format Uncut sleeve length B Standard for narrow format: NF (single sided) and DS (double sided) X Bulk for narrow format (contains double the number of markers in a narrow format B pack): NF (single sided) B Standard for wide format: WF (single sided) Standard White Yellow Code WE YW NF Single-sided printing – narrow format DS Double-sided printing – narrow format WF Single-sided printing – wide format 038 38 mm (1.5”) – narrow format Ordering example: HS032WE2NF038B 050 50 mm (2”) – narrow format Ordering example: HS064YW3NF050X 152 152 mm (6”) – wide format Ordering example: HS095WE6WF152B Ordering information: Specify product name, color, prescores, format, sleeve length and pack size. Ordering example: HS032WE2NF038B Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Heat Shrink/Cable Markers Options 9 Wire and Harness ID Products Heat Shrink/Cable Markers HL Tie-on cable marker tags Used to identify large cables and bundles either pre- or posttermination, these flame retarded HL cable markers are suitable for use in environments with temperatures of –55°C to +135°C (–67°F to +275°F). The markers are easily applied with standard cable ties. HL markers are presented as organized markers assembled onto either a fanfolded or reeled paper carrier for ease of selection and kitting and are available in an extensive range of sizes. They are available with the surface designed for either dot matrix or thermal transfer printers. Features and benefits n Recommended for use where de-termination of wires is not possible for large ID wires or wire bundles. n Heat resistant to +175°C for 168 hours or +250°C for 4 hours with no deterioration in properties. n Several printable widths and heights available. n Non-standard color options available. Temperature rating Operating temperature range –55°C to +135°C –65°F to +275°F Specifications/approvals Tyco Electronics Military TTDS-037 SAE AS81531 4.6.2 MIL-STD-202F Method 215J Heat Shrink/Cable Markers Industry 10 UL 224 (clause 14) ASTM D 2671 Printer information Tyco Electronics printer AM 6310 (dot matrix) Tyco Electronics ribbon 1892BK04 (dot matrix) T312M (thermal transfer) 1892BK03 (dot matrix — high performance) 1950-RIBBON-4T300 (thermal transfer) Part numbering system HL -150-YW-1-NF -033-B Pack size Printable width (mm) Format Scoring Color Marker height Product family Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Wire and Harness ID Products Heat Shrink/Cable Markers HL Tie-on cable marker tags (Cont’d) Ordering information WEB WIDTH WIDTH HEIGHT VERT. REP. Available sizes and formats Marker dimensions (W X H) mm inches Printable area (W X H) mm inches Pack size NF TS HL1041025B 45.00 x 10.40 1.800 x 0.400 25.00 x 10.40 1.000 x 0.400 550 1000 HL1041033B 52.00 x 10.40 2.100 x 0.400 33.00 x 10.40 1.300 x 0.400 550 1000 HL1041038B 58.00 x 10.40 2.300 x 0.400 38.00 x 10.40 1.500 x 0.400 550 1000 HL1041050B 70.00 x 10.40 2.750 x 0.400 50.00 x 10.40 2.000 x 0.400 550 1000 HL1041070B 90.00 x 10.40 3.500 x 0.400 70.00 x 10.40 2.750 x 0.400 550 1000 HL1501025B 45.00 x 15.00 1.800 x 0.600 25.00 x 15.00 1.000 x 0.600 550 500 HL1501033B 52.00 x 15.00 2.100 x 0.600 33.00 x 15.00 1.300 x 0.600 550 500 HL1501038B 58.00 x 15.00 2.300 x 0.600 38.00 x 15.00 1.500 x 0.600 550 500 HL1501050B 70.00 x 15.00 2.750 x 0.600 50.00 x 15.00 2.000 x 0.600 550 500 HL1501070B 90.00 x 15.00 3.500 x 0.600 70.00 x 15.00 2.750 x 0.600 550 500 HL2031025B 45.00 x 20.30 1.800 x 0.800 25.00 x 20.30 1.000 x 0.800 550 500 HL2031033B 52.00 x 20.30 2.100 x 0.800 33.00 x 20.30 1.300 x 0.800 550 500 HL2031038B 58.00 x 20.30 2.300 x 0.800 38.00 x 20.30 1.500 x 0.800 550 500 HL2031050B 70.00 x 20.30 2.750 x 0.800 50.00 x 20.30 2.000 x 0.800 550 500 HL2031070B 90.00 x 20.30 3.500 x 0.800 70.00 x 20.30 2.750 x 0.800 550 500 HL2531025B 45.00 x 25.30 1.800 x 1.000 25.00 x 25.30 1.000 x 1.000 300 250 HL2531033B 52.00 x 25.30 2.100 x 1.000 33.00 x 25.30 1.300 x 1.000 300 250 HL2531038B 58.00 x 25.30 2.300 x 1.000 38.00 x 25.30 1.500 x 1.000 300 250 HL2531050B 70.00 x 25.30 2.750 x 1.000 50.00 x 25.30 2.000 x 1.000 300 250 HL2531070B 90.00 x 25.30 3.500 x 1.000 70.00 x 25.30 2.750 x 1.000 300 250 Heat Shrink/Cable Markers Ordering description Options Prescoring Not available on these products – this should always be 1. Package sizes Standard B Colors Standard White Code WE YW Nonstandard Red Blue Code RD BE Yellow Format NF – Dot matrix printing (fanfold/single sided) Printable Width On Marker 025 25mm (1”) 033 33mm (1.3”) 038 38mm (1.5”) 050 50mm (2”) 070 70mm (2.75”) TS – Thermal transfer (reel/single sided) Ordering information: Specify product name, marker height, color, scoring option (always 1), format, printable width, and pack size. Ordering example: HL150YW1NF033B Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 11 Wire and Harness ID Products Heat Shrink/Cable Markers HT-SCE High temperature, low outgassing heat shrinkable wire identification sleeves Tyco Electronics’s HT-SCE wire markers are designed for use in high temperature applications or where extreme resistance to fuels, lubricants and cleaning solvents is required. They are also ideal for applications in which low-vacuum outgassing is of high importance. The marker sleeves are made of highly flame retarded, heat-shrinkable fluoropolymer tubing. HT-SCE markers are supplied as a thin, flat “ladder” of sleeves held horizontally between two polyester strips. This configuration feeds directly from the storage box into standard Tyco Electronics recommended printers, with no modifications necessary. A strip of adhesive tape on each side of the sleeves holds them securely in place for printing and kitting, yet the sleeves pull easily from the carrier strips. A standard heat gun with reflector is used to shrink the sleeves onto the wire or cable to achieve a permanent mark. After shrinking, HT-SCE markers meet the print performance requirements of SAE AS81531 4.6.2 and MIL-STD-202F. HT-SCE markers are supplied in boxes of 1000 sleeves and are available in nine diameter sizes. These cover substrates from 0.8 mm to 34.0 mm. Because of this versatility, customers need not carry a large inventory of markers. Temperature rating Operating temperature range –55°C to +225°C –67°F to +437°F Minimum recovery temperature +200°C +392°F Maximum storage temperature +40°C +104°F Features and benefits n Permanent identification sleeves. n High continuous operating temperature. n Extreme fluid resistance. n Low-vacuum outgassing. n Wide range of sleeve sizes for several wire Heat Shrink/Cable Markers and bundle diameters. 12 Specifications/approvals Tyco Electronics Military RW2512 SAE AS 81531 4.6.2 MIL-STD-202F Method 215J Printer information Tyco Electronics printer T312M (thermal transfer) Tyco Electronics ribbon TMS-RJS-RIBBON-4HT (thermal transfer) Part numbering system HT-SCE - 1K-1/4 - 2.0 - S1 - 0 Color Scoring (optional) Sleeve length (in.) Expanded inside diameter (in.) Pack size Product family Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 HT-SCE High temperature, low outgassing heat shrinkable wire identification sleeves (Cont’d) Ordering information 50mm (nom) SOG-ER33-3 BT-M D SOG-ER32-3 BT-M d SOG-ER13-3 BT-M Available sizes and formats Inside diameter Ordering description D (min) As supplied d (max) After recovery Recommended use range mm inches mm inches HT-SCE-1K- 3/32 -2.0- 2.36 0.093 0.79 0.031 0.81 - 1.90 mm inches HT-SCE-1K - 1/8 -2.0- 3.18 0.125 1.58 0.062 1.75 - 2.66 0.069 - 0.105 HT-SCE-1K- 3/16 -2.0- 4.75 0.187 2.36 0.093 2.54 - 4.06 0.100 - 0.160 HT-SCE-1K- 1/4 -2.0- 6.35 0.250 3.18 0.125 3.40 - 6.00 0.134 - 0.236 HT-SCE-1K- 3/8 -2.0- 9.53 0.375 4.75 0.187 5.30 - 8.10 0.209 - 0.319 HT-SCE-1K- 1/2 -2.0- 12.70 0.500 6.35 0.250 6.60 - 11.40 0.260 - 0.449 HT-SCE-1K- 3/4 -2.0- 18.00 0.709 9.00 0.354 9.90 - 15.30 0.390 - 0.602 HT-SCE-1K-1-2.0- 25.40 1.000 12.70 0.500 13.30 - 23.00 0.524 - 0.906 HT-SCE-1K-11/2 -2.0- 38.10 1.500 19.05 0.750 Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width. 20.95 - 34.00 0.825 -1.339 0.032 - 0.075 Wire and Harness ID Products Heat Shrink/Cable Markers Options Perforated score to produce multiple marker sleeves from each HT-SCE sleeve Number of prescores 1 prescore 2 prescores 3 prescores Code S1 S2 S3 Package size Standard 1K - 1000 piece packs Nonstandard Larger pack sizes are available. Please contact Tyco Electronics. Colors Standard White Code 9 0 Nonstandard Pink Blue Yellow Code 2L 6 4 Heat Shrink/Cable Markers Prescoring Black Ordering information: Specify product name, pack size, sleeve size, prescore, format and color. Ordering example: HT-SCE-1K-1/4-2.0-S1-9 Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 13 Wire and Harness ID Products Heat Shrink/Cable Markers HT-SCE High temperature, low outgassing heat shrinkable wire identification sleeves Tyco Electronics’s HT-SCE wire markers are designed for use in high temperature applications or where extreme resistance to fuels, lubricants and cleaning solvents is required. They are also ideal for applications in which low-vacuum outgassing is of high importance. The marker sleeves are made of highly flame retarded, heat-shrinkable fluoropolymer tubing. HT-SCE markers are supplied as a thin, flat “ladder” of sleeves held horizontally between two polyester strips. This configuration feeds directly from the storage box into standard Tyco Electronics recommended printers, with no modifications necessary. A strip of adhesive tape on each side of the sleeves holds them securely in place for printing and kitting, yet the sleeves pull easily from the carrier strips. A standard heat gun with reflector is used to shrink the sleeves onto the wire or cable to achieve a permanent mark. After shrinking, HT-SCE markers meet the print performance requirements of SAE AS81531 4.6.2 and MIL-STD-202F. HT-SCE markers are supplied in boxes of 1000 sleeves and are available in nine diameter sizes. These cover substrates from 0.8 mm to 34.0 mm. Because of this versatility, customers need not carry a large inventory of markers. Temperature rating Operating temperature range –55°C to +225°C –67°F to +437°F Minimum recovery temperature +200°C +392°F Maximum storage temperature +40°C +104°F Features and benefits n Permanent identification sleeves. n High continuous operating temperature. n Extreme fluid resistance. n Low-vacuum outgassing. n Wide range of sleeve sizes for several wire Heat Shrink/Cable Markers and bundle diameters. 12 Specifications/approvals Tyco Electronics Military RW2512 SAE AS 81531 4.6.2 MIL-STD-202F Method 215J Printer information Tyco Electronics printer T312M (thermal transfer) Tyco Electronics ribbon TMS-RJS-RIBBON-4HT (thermal transfer) Part numbering system HT-SCE - 1K-1/4 - 2.0 - S1 - 0 Color Scoring (optional) Sleeve length (in.) Expanded inside diameter (in.) Pack size Product family Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 HT-SCE High temperature, low outgassing heat shrinkable wire identification sleeves (Cont’d) Ordering information 50mm (nom) SOG-ER33-3 BT-M D SOG-ER32-3 BT-M d SOG-ER13-3 BT-M Available sizes and formats Inside diameter Ordering description D (min) As supplied d (max) After recovery Recommended use range mm inches mm inches HT-SCE-1K- 3/32 -2.0- 2.36 0.093 0.79 0.031 0.81 - 1.90 mm inches HT-SCE-1K - 1/8 -2.0- 3.18 0.125 1.58 0.062 1.75 - 2.66 0.069 - 0.105 HT-SCE-1K- 3/16 -2.0- 4.75 0.187 2.36 0.093 2.54 - 4.06 0.100 - 0.160 HT-SCE-1K- 1/4 -2.0- 6.35 0.250 3.18 0.125 3.40 - 6.00 0.134 - 0.236 HT-SCE-1K- 3/8 -2.0- 9.53 0.375 4.75 0.187 5.30 - 8.10 0.209 - 0.319 HT-SCE-1K- 1/2 -2.0- 12.70 0.500 6.35 0.250 6.60 - 11.40 0.260 - 0.449 HT-SCE-1K- 3/4 -2.0- 18.00 0.709 9.00 0.354 9.90 - 15.30 0.390 - 0.602 HT-SCE-1K-1-2.0- 25.40 1.000 12.70 0.500 13.30 - 23.00 0.524 - 0.906 HT-SCE-1K-11/2 -2.0- 38.10 1.500 19.05 0.750 Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width. 20.95 - 34.00 0.825 -1.339 0.032 - 0.075 Wire and Harness ID Products Heat Shrink/Cable Markers Options Perforated score to produce multiple marker sleeves from each HT-SCE sleeve Number of prescores 1 prescore 2 prescores 3 prescores Code S1 S2 S3 Package size Standard 1K - 1000 piece packs Nonstandard Larger pack sizes are available. Please contact Tyco Electronics. Colors Standard White Code 9 0 Nonstandard Pink Blue Yellow Code 2L 6 4 Heat Shrink/Cable Markers Prescoring Black Ordering information: Specify product name, pack size, sleeve size, prescore, format and color. Ordering example: HT-SCE-1K-1/4-2.0-S1-9 Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 13 Wire and Harness ID Products Heat Shrink/Cable Markers HTCM-SCE High temperature tie-on-cable marker tags HTCM-SCE markers are flat, rigid, non-adhesive labels that can be used to identify large cables and wire bundles in high temperature environments and outer space applications where low vacuum outgassing is required. Marker tags are applied to cables or wire bundles using cable ties. Print performance meets or exceeds the requirements of SAE AS81531 4.6.2 and MIL-STD-202F. Features and benefits n Side entry provides access to big size cables and wire bundles as well as retrofit and repair capability. n High temperature use. n Highly flame-retardant. n Highly resistant to abrasion, mechanical abuses, fluids, Temperature rating lubricants and solvents. n Low vacuum outgassing for outer space applications. n Ease of use: markers can be easily removed from the carrier. n Easy installation: only standard cable tie-wraps are Operating temperature range –67°F to +437°F Specifications/approvals Tyco Electronics needed to install markers. No extra steps required. n –55°C to +225°C Military Excellent print permanence when printing on the rough side of RW25244 Mark permanence: SAE AS81531 4.6.2 Solvent resistance: MIL-STD-202F Method 215J the marker. Heat Shrink/Cable Markers Printer information 14 Tyco Electronics printer T312M (thermal transfer) Tyco Electronics ribbon TMS-RJS-RIBBON-4HT (thermal transfer) Part numbering system HTM-SCE - 2.5K -1/ 4 - 4H-9 Color Tie-wrap holes Markable height of marker (in.) Pack size Product family Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 HTCM-SCE High temperature tie-on-cable marker tags (Cont’d) Ordering information Figure 1 HTCM-SCE- 1/4 INCH Available sizes and formats Ordering description Size Markable length mm inches 6.40 0.250 50.80 2.000 5.08 – 12.50 0.200 – 0.492 /2 12.70 0.500 50.80 2.000 12.50 and up 0.492 and up /2 12.70 0.500 50.80 2.000 12.50 and up 0.492 and up 1 HTCM-SCE-TP- 1/2 -4H- 1 HTCM-SCE-TP- /2 -6H- 1 mm Recommended use range /4 HTCM-SCE -TP- 1/4 -4H- 1 Markable height inches mm inches Wire and Harness ID Products Heat Shrink/Cable Markers Tie-wrap holes 1 Four holes standard 1 Four holes Six holes Code 4H 6H Code Fx (substitute package size code for “x”) /4 - inch tags /2 - inch tags Fanfold Package sizes Standard 250 pieces Colors Standard White Code 9 Nonstandard Yellow Code 4 Heat Shrink/Cable Markers Options Ordering information: Specify product name, markable height of marker, pack size, number of tie wraps and color. Ordering example: HTCM-SCE - 2.5K --1/4 --4H-9 Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 15 Wire and Harness ID Products Heat Shrink/Cable Markers HX-SCE High Performance Low Fire Hazard Identification Solution Thin wall, zero-halogen, low smoke, low toxicity, radiation crosslinked, UV stabilised polyolefin heat-shrinkable tubing, assembled as cut sleeves organized in a ladder format. Identification of wires and cables by computer-based printing onto sleeves. Ideal for applications where limited fire hazard characteristics are necessary. The zero halogen material coupled with low smoke and low toxic fume emissions make this product is best used in enclosed spaces such as mass transit, marine and industrial installations. This product is not recommended where strain relief properties are required.. Features and benefits n Low fire hazard properties, low smoke, low toxicity, low flammability:- meets industry standard BS 6853 (1999) Vehicle Category 1a. n n Temperature rating Superb print quality to give crisp clear identification Operating temperature range –30°C to +105°C –22°F to +221°F marker sleeve. Minimum recovery temperature +120°C +248°F Excellent print permanence when tested in demanding Maximum storage temperature +40°C +104°F industry related fluids. n Choice of printer options. n Sleeve diameters from 2.4mm to 38.1mm. Specifications/approvals Tyco Electronics n Sleeve length from 12.7mm to 50.8mm. n Sleeves are printable on both sides for ease of n RW 2072 SAE AS81531 4.6.2 MIL-STD-202F Method 215J Industry BS 6853 [1999] – Vehicle Category 1a identification or inclusion of additional information LUL toxic fume (LUL E1042:A6 [2002}) to the marker sleeve. - No halogen, O, N or S sources Shrink ratio of 2:1 - recovers to half of the original Heat Shrink/Cable Markers diameter. 16 Military Printer information Tyco Electronics printers T312M & T212M (thermal transfer) Tyco Electronics ribbons 1966 - Ribbon (T312M) T200 - Ribbon 1966 (T212M) Part numbering system HX-SCE- 1K-4.8 - 50 - S1 - 4 Color Scoring (optional) Sleeve length (mm) Expanded inside diameter (in) Pack size Product family Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 HX-SCE Zero halogen heat shrinkable wire identification sleeves (Cont’d) Ordering information Available sizes and formats Inside diameter Ordering description D (min) as supplied d (max) after recovery Recommended use range mm inches mm inches 2.40 0.094 1.19 0.047 1.75 - 2.66 0.069 - 0.105 HX-SCE-1K-3.2 - 50- 3.20 0.126 1.58 0.060 2.54 - 4.06 0.100 - 0.160 HX-SCE-1K-4.8 - 50- > 4.80 0.189 2.36 0.090 3.81 - 5.46 0.150 - 0.215 HX-SCE-1K-6.4 - 50- 6.40 0.250 3.18 0.125 5.59 - 8.12 0.220 - 0.320 HX-SCE-1K-9.5 - 50- 9.50 0.375 4.75 0.187 6.99 - 10.79 0.275 - 0.425 HX-SCE-1K-2.4 - 50- mm inches HX-SCE-1K-12.7 - 50- 12.70 0.500 6.35 0.250 10.16 - 16.25 0.400 - 0.640 HX-SCE-1K-19.0 - 50- 19.00 0.730 9.53 0.375 14.29 - 21.59 0.563 - 0.850 HX-SCE-1K-25.4 - 50- 25.40 1.000 12.70 0.500 20.95 - 33.02 0.825 - 1.300 HX-SCE-1K-38.1 - 50- 38.10 1.500 19.05 0.750 14.29 - 21.59 0.563 - 0.850 Wire and Harness ID Products Heat Shrink/Cable Markers Options Package sizes Perforated score to produce multiple marker sleeves from each HX-SCE sleeve. Standard Side scored Number of prescores 1 prescore 2 prescores 3 prescores Code S1 S2 S3 Standard 1K - 1000 piece packages available for all HX-SCE sizes up to 25.4 Nonstandard 2.5K - 2500 pieces available for 4.8 and 6.4 HX-SCE sizes Heat Shrink/Cable Markers Prescoring 5K - 5000 pieces available for 2.4 and 3.2 HX-SCE sizes 250 piece package available for all HX-SCE sizes Colors Standard Yellow White Code 4 9 Nonstandard Red Green Blue Orange Code 2 5 6 3 Ordering information: Specify product name, pack size, sleeve size, prescore, format and color. Ordering example: HX-SCE-1K--50-S1-4 Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 17 Wire and Harness ID Products Heat Shrink/Cable Markers HLX Low fire hazard cable marker tags HLX cable markers are made from zero halogen, low smoke, low toxicity, radiation cross-linked, UV stabilized polyolefin sheet, formed into punched organized cable markers on a paper carrier. They are used for identification of cables and wire bundles by computer-based printing onto markers. Markers are attached using cable ties. HLX markers are ideal for applications where limited fire hazard characteristics are necessary. Features and benefits n Recommended for use where combustion of products may endanger personnel or place delicate electronics at risk. n Several printable heights and widths available. Temperature rating Operating temperature range –30°C to +105°C –22°F to +221°F Specifications/approvals Tyco Electronics RW 2523 Military SAE AS81531 4.6.2 MIL-STD-202F Method 215J Industry UL 224 (clause 14) BS 4G 198 Part 3 ASTM D 2671 Heat Shrink/Cable Markers Printer information 20 Tyco Electronics printer T312M (thermal transfer) Tyco Electronics ribbon 1966-RIBBON Part numbering system HLX 150 YW 1 TS 033 B Pack size Printable width (mm) Format Scoring Color Marker height Product family Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Ordering information Available sizes and formats Ordering description Marker dimensions (W X H) mm inches Printable area (W X H) mm inches Pack size TS HLX1041025B 45.00 x 10.40 1.800 x 0.400 25.00 x 10.40 1.000 x 0.400 HLX1041033B 52.00 x 10.40 2.100 x 0.400 33.00 x 10.40 1.300 x 0.400 1000 1000 HLX1041038B 58.00 x 10.40 2.300 x 0.400 38.00 x 10.40 1.500 x 0.400 1000 HLX1041050B 70.00 x 10.40 2.750 x 0.400 50.00 x 10.40 2.000 x 0.400 1000 HLX1041070B 90.00 x 10.40 3.500 x 0.400 70.00 x 10.40 2.750 x 0.400 1000 HLX1501025B 45.00 x 15.00 1.800 x 0.600 25.00 x 15.00 1.000 x 0.600 500 HLX1501033B 52.00 x 15.00 2.100 x 0.600 33.00 x 15.00 1.300 x 0.600 500 HLX1501038B 58.00 x 15.00 2.300 x 0.600 38.00 x 15.00 1.500 x 0.600 500 HLX1501050B 70.00 x 15.00 2.750 x 0.600 50.00 x 15.00 2.000 x 0.600 500 HLX1501070B 90.00 x 15.00 3.500 x 0.600 70.00 x 15.00 2.750 x 0.600 500 HLX2031025B 45.00 x 20.30 1.800 x 0.800 25.00 x 20.30 1.000 x 0.800 500 HLX2031033B 52.00 x 20.30 2.100 x 0.800 33.00 x 20.30 1.300 x 0.800 500 HLX2031038B 58.00 x 20.30 2.300 x 0.800 38.00 x 20.30 1.500 x 0.800 500 HLX2031050B 70.00 x 20.30 2.750 x 0.800 50.00 x 20.30 2.000 x 0.800 500 HLX2031070B 90.00 x 20.30 3.500 x 0.800 70.00 x 20.30 2.750 x 0.800 500 HLX2531025B 45.00 x 25.30 1.800 x 1.000 25.00 x 25.30 1.000 x 1.000 250 HLX2531033B 52.00 x 25.30 2.100 x 1.000 33.00 x 25.30 1.300 x 1.000 250 HLX2531038B 58.00 x 25.30 2.300 x 1.000 38.00 x 25.30 1.500 x 1.000 250 HLX2531050B 70.00 x 25.30 2.750 x 1.000 50.00 x 25.30 2.000 x 1.000 250 HLX2531070B 90.00 x 25.30 3.500 x 1.000 70.00 x 25.30 2.750 x 1.000 250 Options Prescoring Not available on these products – this should always be 1. Package sizes Standard B Colors Standard White Code WE YW Nonstandard Red Blue Code RD BE Format TS – Thermal transfer (reel/single sided) Printable width on marker 025 Yellow 25mm (1”) 033 33mm (1.3”) 038 38mm (1.5”) 050 50mm (2”) 070 70mm (2.75”) Wire and Harness ID Products HLX Low fire hazard cable marker tags (Cont’d) Heat Shrink/Cable Markers Heat Shrink/Cable Markers Ordering information: Specify product name, marker height, color, scoring option (always 1), format, printable width, and pack size. Ordering example: HLX150YW1TS033B Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 21 Wire and Harness ID Products Heat Shrink/Cable Markers D-SCE Fluid resistant computer-printable permanent wire identification sleeves D-SCE markers are used to identify wires and cables where exposure to organic fluids, especially oils, is required. D-SCE markers are designed to operate in these conditions at elevated temperatures for extended periods of time, making them ideal in aerospace, rail and construction industries. The D-SCE markers are suitable for use in environments with temperatures of – 55°C to +135°C (– 67°F to +275°F), and will provide strain relief, insulation and protection from mechanical abuse. The 3:1 shrink ratio markers* are assembled in a ladder format enabling sleeves to be printed on both sides for maximum data content and readability. *See ordering description. Features and benefits n Resistance to organic fluids, common fuels, lubricants Temperature rating and solvents. n n n Operating temperature range 3:1 shrink ratio. Wide range of sizes for several wire and bundle diameters. –67°F to +275°F +135°C +275°F Maximum storage temperature +40°C +104°F Formulated for use in aerospace, rail and construction equipment. n –55°C to +135°C Minimum recovery temperature Specifications/approvals Dot matrix and thermal transfer printable — both print Tyco Electronics RW 2519 technologies meet all specifications and approvals listed. Military SAE-AMS-DTL-23053/6, Class 1 (material and performance requirements) SAE AS81531 4.6.2 MIL-STD-202F Method 215J Industry NF F 00 608 Category A and H Printer information Tyco Electronics printer AM6310 (dot matrix) Tyco Electronics ribbon 1892BK04-RIBBON (dot matrix) Heat Shrink/Cable Markers T312M (thermal transfer) 22 1966-RIBBON Part numbering system D-SCE - 5K - 3.2 - 50 - S1- 4 Color Scoring (optional) Sleeve length (mm) Expanded inside diameter (mm) Large packaging (optional) Product family Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 D-SCE Fluid resistant computer-printable permanent wire identification sleeves (Cont’d) Ordering information 50mm (nom) SOG-ER33-3 BT-M D SOG-ER32-3 BT-M d SOG-ER13-3 BT-M Available sizes and formats Inside diameter Ordering description D (min) As supplied mm inches d (max) After recovery mm inches Recommended use range mm inches D-SCE-1K-2.4-50- 2.39 0.094 0.79 0.031 0.81 - 1.90 0.032 - 0.075 D-SCE-1K-3.2-50- 3.18 0.125 1.07 0.043 1.11 - 2.66 0.044 - 0.105 D-SCE-1K-4.8-50- 4.75 0.187 1.57 0.063 1.75 - 4.06 0.069 - 0.160 D-SCE-1K-6.4-50- 6.35 0.250 2.11 0.084 2.31 - 5.46 0.091 - 0.215 D-SCE-1K-9.5-50- 9.53 0.375 3.18 0.125 3.47 - 8.12 0.137 - 0.320 D-SCE-1K-12-50- 12.70 0.500 4.22 0.167 4.64 - 10.79 0.183 - 0.425 D-SCE-1K-18-50- 19.05 0.750 6.35 0.250 6.99 - 16.25 0.275 - 0.640 D-SCE-1K-25-50- 25.40 1.000 8.46 0.333 9.29 - 21.59 0.366 - 0.850 D-SCE-1K-38-50-* 38.10 1.500 19.05 0.750 20.95 - 33.02 0.825 - 1.300 Wire and Harness ID Products Heat Shrink/Cable Markers * 2:1 shrink ratio Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width. Options Perforated score to produce multiple marker sleeves from each D-SCE sleeve. Standard Side scored Number of prescores 1 prescore 2 prescores 3 prescores Code S1 S2 S3 Package sizes Standard 1K - 1000 piece packages available for all D-SCE sizes Nonstandard Larger pack sizes are available. Please contact Tyco Electronics. Colors Standard White Code 9 4 Nonstandard Pink Blue Code 2L 6 Heat Shrink/Cable Markers Prescoring Yellow Ordering information: Specify product name, pack size, sleeve size, prescore, format and color. Ordering example: D-SCE-1K-6.4-50-S2-4 Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 23 Wire and Harness ID Products Heat Shrink/Cable Markers NMX Flame retarded polyaramid cable marker tags NMX cable marker tags are used for identification of cables and wire bundles by computer-based printing onto markers. The markers are attached using cable ties. They are ideal for aerospace and other cases where resistance to harsh environments and light weight are important. Features and benefits n Extremely light weight. n Ultimate tensile strength and tear resistance. n Flame retardant. n Resistant to several avionics fluids, solvents and cleaners. n Dot matrix printable. n Available in white and yellow printable areas. Temperature rating Operating temperature range –40°C to +135°C –40°F to +275°F Specifications/approvals Tyco Electronics TTDS-030 Military SAE AS81531 4.6.2, MIL-STD-202F Method 215J Industry DMS 2325, DMS 2409 Printer information Tyco Electronics printer AM6310 (dot matrix) Tyco Electronics ribbon 1892 BK01 (dot matrix) Part numbering system Heat Shrink/Cable Markers NMX 25625 WE 2.5 24 Pack size Color Product size Product family Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 NMX Flame retarded polyaramid cable marker tags (Cont’d) Ordering information 3.500 2.500 0.625 Available sizes and formats Ordering description Label width NMX256252.5 Label height Printable width Weight mm inches mm inches mm inches (g/10 pcs.) 63.50 2.500 15.87 0.625 50.80 2.000 2.5 Wire and Harness ID Products Heat Shrink/Cable Markers Options Package sizes Colors Standard 2500 pieces per pack Nonstandard Larger pack sizes are available. Please contact Tyco Electronics. White Yellow WE YE Ordering information: Specify product name, product size, color and pack size. Heat Shrink/Cable Markers Ordering example: NMX25625WE2.5 Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 25 Wire and Harness ID Products Heat Shrink/Cable Markers RPS Commercial grade wire identification sleeves RPS markers are heat shrinkable marking sleeves for wire and cable identification. When RPS is printed with Tyco Electronics recommended printers and ink ribbons, the marks remain legible, without any post printing process, even when exposed to abrasion, aggressive cleaning solvents, and industrial fluids. RPS markers are designed to meet the wire identification needs of commercial and industrial customers. Features and benefits n Permanent identification sleeves. n Computer printable. n Excellent print performance. n Configured for ease of kitting. n Good chemical and solvent resistance. n 3:1 shrink ratio. n CSA Certified, UL Recognized. Temperature rating Operating temperature range –30°C to +105°C –22°F to +221°F Minimum recovery temperature +85°C +185°F Maximum storage temperature +40°C +104°F Specifications/approvals Tyco Electronics Military RW 2510 SAE AS81531 4.6.2 MIL-STD-202F Method 215J Industry UL Recognized – standard 224, file E35586 CSA Certified – file 31929 Printer information Heat Shrink/Cable Markers Tyco Electronics printer 26 AM6310 (dot matrix) T208M (thermal transfer – low volume) T312M (thermal transfer) Tyco Electronics ribbon 1892BK04-RIBBON (dot matrix) TMS-101-RIBBON-4RPSCE (thermal transfer for T208M) TMS-RJS-RIBBON-4RPSCE (thermal transfer for T312M) Part numbering system RPS-1K-22-18/2.0-S1-9 Color Scoring (optional) Sleeve length (in) US wire gauge size Pack size Product family Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 RPS Commercial grade wire identification sleeves (Cont’d) Ordering information 50mm (nom) SOG-ER33-3 BT-M D SOG-ER32-3 BT-M d SOG-ER13-3 BT-M Available sizes and formats Inside diameter Ordering description D (min) as supplied RPS-1K-22-18/2.0- d (max) after recovery Recommended use range mm inches mm inches mm 3.18 0.125 1.07 0.042 1.17 - 2.66 0.046 - 0.105 inches RPS-1K-18-12/2.0- 4.75 0.187 1.57 0.062 1.75 - 4.06 0.069 - 0.160 RPS-1K-16-10/2.0- 6.35 0.250 2.11 0.083 2.31 - 5.46 0.091 - 0.215 RPS-1K-8-4/2.0- 9.53 0.375 3.18 0.125 3.47 - 8.12 0.137 - 0.320 RPS-1K-10-2/2.0- 12.70 0.500 4.22 0.166 4.64 - 10.79 0.183 - 0.425 RPS-1K-6-250/2.0- 19.05 0.750 6.35 0.250 6.99 - 16.25 0.275 - 0.640 RPS-1K-1-400/2.0- 25.40 1.000 8.46 0.333 9.29 - 21.59 0.366 - 0.850 RPS-1K-400-1000/2.0- 38.10 1.500 19.05 0.750 Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width. 20.95 - 33.02 0.825 - 1.300 Wire and Harness ID Products Heat Shrink/Cable Markers Options Prescoring Perforated score to produce multiple marker sleeves from each RPS sleeve. 1 prescore 2 prescores 3 prescores Code S1 S2 S3 Package sizes Standard 1K -1000 piece packs Nonstandard Smaller and larger pack sizes are available. Please contact Tyco Electronics. Colors Standard White Yellow Code 9 4 Heat Shrink/Cable Markers Number of prescores Ordering information: Specify product name, pack size, sleeve size, prescore, format and color. Ordering example: RPS-1K-22-18/2.0-S2-9 Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 27 Wire and Harness ID Products Heat Shrink/Cable Markers NBC-SCE Nuclear, biological & chemical heat shrinkable wire identification sleeves Tyco Electronics NBC-SCE is used to identify wire and cables where extreme resistance to cleaning solvents is needed. The markers are suitable for use in wire harness systems requiring high fluid resistance and resistance to the effects of nuclear, biological and chemical agent exposure and decontamination. The markers should be used with an appropriate transparent oversleeve whose ends are sealed with an appropriate epoxy adhesive. NBC-SCE marker sleeves are suitable for use in environments with temperatures from –55°C to +225°C (–67°F to +275°F). Features and benefits n Permanent identification sleeves. n Computer-printable. n 2:1 shrink ratio. n NBC application with the appropriate adhesive and oversleeve. Temperature rating Operating temperature range –55°C to +225°C –67°F to +437°F Minimum recovery temperature +200°C +392°F Maximum storage temperature +40°C +104°F Specifications/approvals Tyco Electronics RW2514 Military SAE AS81531 4.6.2 MIL-STD-202F Method 215J Heat Shrink/Cable Markers Printer information 28 Tyco Electronics printer T312M (thermal transfer) Tyco Electronics ribbon TMS-RJS-RIBBON-4HT (thermal transfer) Part numbering system NBC-SCE - 1K-1/4 - 2.0 - S1 - 9 Color Scoring (optional) Sleeve length (in) Expanded inside diameter (in) Large packaging (optional) Product family Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 NBC-SCE Nuclear, biological & chemical heat shrinkable wire identification sleeves (Cont’d) Ordering information 50mm (nom) SOG-ER33-3 BT-M D SOG-ER32-3 BT-M d SOG-ER13-3 BT-M Available sizes and formats Inside diameter Expanded Recovered D (minimum) d (maximum) Ordering description Recommended use range Recovered wall thickness mm inches mm inches mm 3.43 0.135 1.59 0.062 1.75-2.66 0.069 -0.105 0.38 ± 0.08 0.015 ± 0.003 NBC-SCE-1K-1/4- 2.0 6.35 0.250 3.18 0.125 3.81-5.46 0.150-0.215 0.38 ± 0.08 0.015 ± 0.003 NBC-SCE-1K-1/2- 2.0 12.70 0.500 6.35 0.250 6.99-10.79 0.275-0.425 0.38 ± 0.08 0.015 ± 0.003 NBC-SCE-1K-3/4- 2.0 19.05 0.750 9.53 0.375 10.16-16.25 0.400-0.640 0.38 ± 0.08 0.015 ± 0.003 NBC-SCE-1K-1- 2.0 25.40 1.000 12.70 0.500 14.70-21.50 0.578-0.846 0.43 ± 0.10 0.017 ± 0.004 NBC-SCE-1K-1-1/2- 2.0 38.10 1.500 19.05 0.750 20.95-33.02 0.825-1.300 0.43 ± 0.10 0.017 ± 0.004 NBC-SCE-1K-1/8- 2.0 inches mm inches Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width. Wire and Harness ID Products Heat Shrink/Cable Markers Options Prescoring Perforated score to produce multiple marker sleeves from each NBC-SCE sleeve. Number of prescores 1 prescore 2 prescores 3 prescores Code S1 S2 S3 Package sizes Standard 1000 piece packages available for all NBC-SCE sizes Colors Standard White Code 9 Heat Shrink/Cable Markers Ordering information: Please specify product name, pack size, sleeve size, prescore, format and color. Ordering example: NBC-SCE-1K-1/8-2.0-9 Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 29 Wire and Harness ID Products Heat Shrink/Cable Markers TMS-CCUV Heat shrinkable UV protection sleeves TMS-CCUV clear heat shrinkable sleeves are designed for over protection of TMS System Six identification products, to give increased protection for permanent, long-term environmental exposure. The clear CCUV heat-shrinkable sleeves are formulated to combine a long-term barrier to the effects of ultra-violet, with tough resistance to abrasion and industrial fluids. They are available in packs which match the product sizes and pack quantities of TMS System Six heat-shrinkable identification sleeves and cable markers. The TMS CCUV sleeves are inherently low profile and use the action of heat-shrink to lock in place over the previously installed identification sleeves; except for cable markers which use a slide fitting CCUV sleeve which is held in place by the cable ties. The action of heat-shrink locking of the CCUV sleeves means there is no reliance on the long term performance of adhesives to hold the outer protection layer in place, and also gives the ability to accommodate cables and wire bundles which may be bent or flexed during use. Features and benefits n Temperature rating Operating temperature range –55°C to +150°C –67°F to 302°F Minimum recovery temperature +150°C +302°F Maximum storage temperature +40°C +104°F Specifications/approvals Exceptional clarity and stability. Tyco Electronics RW 2525 Military UL VW-1 rated SAE-AMS-DTL-23053/18, Class 2 n Added UV-resistant sleeves. n Not printable. n Tough resistance to abrasion and industrial fluids. Part numbering system n Heat-shrink locking in place (no reliance on adhesives). TMS-CCUV- SLEEVE-1- X- 65mm n Low profile. n Accommodates bent or flexing cable/wire bundles. n Can work as an NBC (nuclear, biological, chemical) System with Sleeve length (mm)** Color (clear for all)** Sleeve reference Loose sleeves CCUV sleeve Heat Shrink/Cable Markers NBC-SCE sleeves and appropriate adhesive. ** not used in NBC-SCE 76mm (3") length sleeve options Ordering information Before shrinking After shrinking over TMS cable sleeve TMS IDENT SLEEVE D 60mm to65mm Wiredia. L After sliding over TMS cable marker After shrinking over TMS cable marker TMS CABLE MARKER TMS CABLEM ARKER 32mm Cable dia. 60mm to65mm 30 Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 TMS-CCUV Heat shrinkable UV protection sleeves (Cont’d) Available sizes and formats (For use with heat shrink sleeves) Inside diameter minimum mm inches Recovered diameter maximum mm inches TMS-CCUV-SLEEVE-1-X-65mm 65 3.20 0.125 1.60 0.063 1.80-2.80 0.071-0.110 2.40 0.094 N/A TMS-CCUV-SLEEVE-1-X-65mm 65 3.20 0.125 1.60 0.063 1.80-2.80 0.071-0.110 3.20 0.125 22-18 TMS-CCUV-SLEEVE-2-X-65mm 65 4.80 0.187 2.40 0.094 2.60-3.70 0.102-0.146 4.80 0.188 18-12 TMS-CCUV-SLEEVE-2-X-65mm 65 4.80 0.187 2.40 0.094 2.60-3.70 0.102-0.146 6.40 0.250 16-10 TMS-CCUV-SLEEVE-3-X-65mm 65 6.40 0.250 3.20 0.126 3.50-5.10 0.138-0.201 9.50 0.375 8-4 TMS-CCUV-SLEEVE-4-X-65mm 65 9.50 0.375 4.80 0.189 5.00-7.00 0.197-0.275 12.70 0.500 10-2 TMS-CCUV-SLEEVE-5-X-65mm 65 12.70 0.500 6.40 0.252 6.90-10.60 0.272-0.417 19.00 0.750 6-250 TMS-CCUV-SLEEVE-6-X-65mm 65 19.00 0.750 9.50 0.374 10.00-14.00 0.394-0.551 25.40 1.000 1-400 TMS-CCUV-SLEEVE-7-X-65mm 65 25.40 1.000 12.70 0.500 13.30-21.00 0.524-0.827 25.40 1.000 1-400 38.10 1.500 400-1000 Sleeve length mm Wire size diameter mm inches TMS-CCUV-SLEEVE-8-X-65mm 65 38.10 1.500 19.00 0.748 21.00-33.80 0.827-1.331 Some TMS-SCE and RPS sleeve sizes may need to be recovered partially before CCUV sleeve is applied to protect them. (For use with cable markers to secure / protect without cable ties) Inside Ordering Sleeve diameter description length minimum mm inches Recovered diameter maximum mm inches TMS-CCUV-SLEEVE-4-X-65mm 65 9.50 0.375 4.80 0.189 TMS-CCUV-SLEEVE-5-X-65mm 65 12.70 0.500 6.40 TMS-CCUV-SLEEVE-6-X-65mm 65 19.00 0.750 9.50 TMS-CCUV-SLEEVE-7-X-65mm 65 25.40 1.000 12.70 (For use with cable markers to protect with cable ties) Inside Ordering Sleeve diameter description length minimum mm mm inches Wire size diameter mm inches Marker height mm inches 6.40 0.250 0.275-0.433 6.40 0.250 0.472-0.669 12.70 0.500 0.590-0.905 12.70 0.500 5.00-8.00 0.197-0.315 0.252 7.00-11.00 0.374 12.00-17.00 0.500 15.00-23.00 Recovered diameter maximum mm inches Sleeve size expanded diameter TMS-SCE RPS mm inches US Wire gauge Wire size diameter mm inches Marker height mm inches TMS-CCUV-SLEEVE-9-X-32mm 32 6.40 0.250 3.20 0.126 N/A 6.40 0.250 TMS-CCUV-SLEEVE-10-X-32mm 32 12.70 0.500 6.40 0.252 N/A 12.70 0.500 (For use with NBC-SCE sleeves and adhesives sealing*) Ordering description Sleeve length mm Inside diameter minimum mm inches Recovered diameter maximum mm inches Wire size diameter NBC-SCE mm inches Sleeve size expanded diameter NBC-SCE mm inches TMS-CCUV-SLEEVE-15 76 3.20 0.125 1.60 0.063 1.80-2.80 0.071-0.110 3.20 0.125 TMS-CCUV-SLEEVE-16 76 4.80 0.187 2.40 0.094 2.60-3.70 0.102-0.146 4.80 0.188 TMS-CCUV-SLEEVE-17 76 6.40 0.250 3.20 0.126 3.50-5.10 0.138-0.201 6.40 0.250 TMS-CCUV-SLEEVE-18 76 9.50 0.375 4.80 0.189 5.00-7.00 0.197-0.275 9.50 0.375 TMS-CCUV-SLEEVE-19 76 12.70 0.500 6.40 0.252 6.90-10.60 0.272-0.417 12.70 0.500 TMS-CCUV-SLEEVE-20 76 19.00 0.750 9.50 0.374 10.00-14.00 0.394-0.551 19.00 0.750 TMS-CCUV-SLEEVE-21 76 25.40 1.000 12.70 0.500 13.30-21.00 0.524-0.827 25.40 1.000 38.10 1.500 TMS-CCUV-SLEEVE-22 76 38.10 1.500 19.00 0.748 21.00-33.80 0.827-1.331 *For use with adhesives such as S-1255-04 and S-1264 please refer to RT1012 and RT1014 for specifications and adhesive details. Options Prescoring Not available — supplied as cut pieces. Package Sizes Standard 250 piece bags only Colors Standard Clear only Ordering information: Specify product name, loose sleeve, sleeve reference, color and sleeve length. Ordering example: For all Heat Shrink sleeves except NBC-SCE TMS-CCUV-SLEEVE-1-X- 65mm For NBC-SCE TMS-CCUV-SLEEVE-22 Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Heat Shrink/Cable Markers Ordering description Wire and Harness ID Products Heat Shrink/Cable Markers 31 Wire and Harness ID Products Heat Shrink/Cable Markers MultiMark Strip & Carriers insert marker for post termination identification MultiMark is comprised of a polyolefin printed strip, which is inserted into a protective PVC carrier. The carrier can be applied to wires or cables pre-termination to allow post termination printed strip insertion or the strips can be replaced post termination when re-labeling is required. The PVC carrier protects the markers from dust and grime. These carriers are available in a number of sizes to cover a wide range of cable diameters. The printable strips are presented as organized markers assembled onto fanfolded paper carrier for ease of selection and kitting. The strips are available in a variety of lengths. Available for printing by dot matrix only. Features and benefits n Suitable for post termination labeling and re-labeling n Marker lengths 10mm to 30mm n Clear carriers to fit cable diameters 1.8mm to 8.0mm Temperature rating Operating temperature range –45°C to +70°C –49°F to 158°F Specifications/approvals Military MIL-STD 202F method 215J SAE-AS81531 4.6.2 Printer information Tyco Electronics Printer Tyco Electronics Ribbon AM6310 (dot matrix) 1892BK04 (dot matrix) Heat Shrink/Cable Markers Part numbering system 32 082 - 5 - 99 - 19A Size (pack quantity & length) Color Format Number (Height) Material Type Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Ordering Information Type Format Number Color Size Pack Qty Marker length 082 = Polyolefin Label 5 = Height 4mm 99 = White 01A 880 pcs. 15.0mm 94 = Yellow 03A 880 pcs. 30.0mm 05A 792 pcs. 10.0mm MultiMark . 02A 1760 pcs. 15.0mm 04A 1760 pcs. 30.0mm 06A 1848 pcs. 10.0mm 17A 1320 pcs. 20.0mm 18A 2640 pcs. 20.0mm 19A 3520 pcs. 15.0mm Legends Order Code Marker Length Marker Height mm inches mm inches Pack Quantity Color White 08259905A 10.2 0.4 4 0.16 792 08259906A 10.2 0.4 4 0.16 1848 White 08259901A 15.2 0.6 4 0.16 880 White 08259902A 15.2 0.6 4 0.16 1760 White 08259919A 15.2 0.6 4 0.16 3520 White 08259917A 20.2 0.8 4 0.16 1320 White 08259918A 20.2 0.8 4 0.16 2640 White 08259903A 30.2 1.2 4 0.16 880 White 08259904A 30.2 1.2 4 0.16 1760 White Yellow 08259405A 10.2 0.4 4 0.16 792 08259406A 10.2 0.4 4 0.16 1848 Yellow 08259401A 15.2 0.6 4 0.16 880 Yellow 08259402A 15.2 0.6 4 0.16 1760 Yellow 08259419A 15.2 0.6 4 0.16 3520 Yellow 08259417A 20.2 0.8 4 0.16 1320 Yellow 08259418A 20.2 0.8 4 0.16 2640 Yellow 08259403A 30.2 1.2 4 0.16 880 Yellow 08259404A 30.2 1.2 4 0.16 1760 Yellow Carriers For Cable Size (mm2) Carrier Size 0825001 1.8 - 4.0 0.5 - 1.5 0 ----- 50m coil 0825016 1.8 - 4.0 0.5 - 1.5 0 16 1200 pcs 0825032 1.8 - 4.0 0.5 - 1.5 0 32 600 pcs 0825201 2.6 - 6.0 1.5 - 6.0 2 ----- 30m coil 0825216 2.6 - 6.0 1.5 - 6.0 2 16 800 pcs 0825232 2.6 - 6.0 1.5 - 6.0 2 32 400 pcs 0825416 5.2 - 8.0 4.0 - 16.0 4 16 400 pcs 0825432 5.2 - 8.0 4.0 - 16.0 4 32 200 pcs Order Code Catalog 1654227 Revised 1-05 www.tycoelectronics.com For Cable Diameter (mm) Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 Carrier Length Pack Quantity South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Wire and Harness ID Products MultiMark Strip & Carriers insert marker for post termination identification (Cont’d) Heat Shrink/Cable Markers Heat Shrink/Cable Markers 33 Wire and Harness ID Products Heat Shrink/Cable Markers iMC Laser or hand writable marking clip Tyco iMC are marking clips designed for the identification of wires and can be permanently attached to wires, post termination. They can be quickly and simply clipped on the wire or cable. The polyester insert strip which can be printed using a laser printer or written by hand is then inserted in the clip. The marking clips are fastened without the need of cable ties. Features and benefits n Protects against damp, dust and dirt n IMC polyester strip can be marked with a laser printer or by hand n Quick and flexible n iMC strip is a dual color label with white on one side and yellow on the other Temperature rating Operating temperature +80°C (+176°F) Printer Information Standard laser printer with auto/manual sheet feed Heat Shrink/Cable Markers Contact Tyco Electronics Electronics Identification for more information. 34 Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 iMC Laser or hand writable marking clip (Cont’d) Ordering Information Marker Clips Ordering Description iMC02 Clips per pack 500 Recommended Use Range mm (in) Typical Cross Section mm2 0.75 - 2.00 0.20 - 0.75 (0.03 - 0.08) iMC04 500 1.75 - 3.25 500 3.00 - 4.50 0.50 - 1.50 500 4.25 - 6.00 15 x 7.8. (0.59 - 0.31) 1.50 - 6.00 (0.12- 0.18) iMC08 15 x 7.8 (0.59 - 0.31) (0.07 - 0.13) iMC06 Dimensions Length x Width mm (in) 15 x 9.5 (0.59 - 0.37 6.00 - 10.00 (0.17 - 0.24) 15 x 9.5 (0.59 - 0.37) Legend Strips (A4 Sheets) Ordering Description 560 Color Label Size Height x Width mm (in) 1 side White 6.4 x 12.2 1 side Yellow (0.25 x 0.48) Heat Shrink/Cable Markers iMCA4ES-4/9 Labels per sheet Wire and Harness ID Products Heat Shrink/Cable Markers Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 35 Wire and Harness ID Products Heat Shrink/Cable Markers iKC/iKB Laser or hand writable cable clip Tyco iKC/iKB are cable clips designed for the identification of wires and cables in rough, damp and dusty environments. The legend strip (iKB) with the printable information is embedded in the cable clip (iKC) and therefore has all- round protection. The cable clips are fastened on using cable ties. . Features and benefits n Protects against damp, dust and dirt n iKB legend strip marked with a laser printer or by hand n Universal application on various cable diameters n iKB legend strip is a dual color label with white on one side and yellow on the other Temperature rating Operating temperature -26°C to +130°C (-15°F to +266°F) Printer Information Standard laser printer with auto/manual sheet feed Heat Shrink/Cable Markers Contact Tyco Electronics Electronics Identification for more information. 36 Catalog 1654227 Revised 1-05 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Wire and Harness ID Products Heat Shrink/Cable Markers iKC/iKB Laser or hand writable cable clip (Cont’d) Ordering Information Cable Clips iKC Ordering Description Clips per pack iKC01 25 Dimensions Length x Width mm (in) 44 x 21 (1.73 - 0.83) iKC02 25 34 x10.5 (1.34 - 0.41) iKC03 25 68 x 10.5 Heat Shrink/Cable Markers (2.68 x - 0.41) Ordering Information Legend Strips iKB (A4 Sheets) Ordering Description Labels per sheet iKB01P-9/4 60 iKB02P-9/4 iKB03P-9/4 Catalog 1654227 Revised 1-05 www.tycoelectronics.com 240 120 Dimensions not italicized are in millimeters while dimensions in inches are italicized. Color Label Size Height x Width mm (in) 1 side White 16 x 40 1 side Yellow (0.63 x 1.57) 1 side White 6.2 x 30 1 side Yellow (0.24 x 0.41) 1 side White 6.2 x 64 1 side Yellow (0.24 x 0.41) Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 37