PLASTI-GRIP TERMINALS
& SPLICES
Quick Reference Guide
INDUSTRIAL /// PLASTI-GRIP TERMINALS & SPLICES
FEATURES AND BENEFITS
• PVC Insulation sleeve provides good dielectric strength and supports the wire insulation so that no
bare wire is exposed
• Accepted in various markets
• Crimp performance guaranteed with with TE tooling
• Funneled wire entry on terminal prevents turned back wire strands and permits rapid wire insertion
during high speed production
• Serrations in the crimp barrel provide maximum contact and tensile strength after crimping
• Most UL listed/CSA approved; insulation is 94V-0 rated
PRODUCT APPLICATIONS
•
Panel Boxes
•
Motors
Switchgear
•
Power Supplies
600V
105
UL/CSA
•
•
Instruments/Controls
Operating
Voltage
Max Operating
Temperature (Celsius)
UL and CSA
Approval
•
Lighting
•
Transportation
•
HVAC
•
Repair, Service & Installation
INDUSTRIAL /// PLASTI-GRIP TERMINALS & SPLICES
WHAT’S INSIDE
Pre-insulated PLASTI-GRIP solderless terminals and splices are designed specifically to answer the
need for low-cost, insulated electrical terminations. They consist of a high conductivity copper body
and color coded PVC insulation that can be used in almost all commercial applications. Carefully
engineered Application Tooling has been designed in conjunction with the terminal to promote ease
and speed of application. The wire and wire barrel together form a connection of high conductivity and
tensile strength, while the tin plating provides good resistance to corrosion. The quality, performance,
and ease of installation make them ideal for many industrial applications. Most PLASTI-GRIP products
are UL and CSA approved, and are available in various tongue styles, stud sizes, and wire ranges from
22 AWG through 2/0.
TE.COM/PRODUCTS/PLASTIGRIP
PAGE 3
TE Connectivity
PLASTI-GRIP Terminals & Splices
MATERIAL
Insulation: Vinyl, UL 94V-0
Terminal Body: Copper per ASTM B-152
Plating: Tin per ASTM B-545
L
L
W
L
W
W
A
B
C
Ring Tongue Terminals
Manual Hand Tools
Wire Size
AWG
mm2
22 - 16
0.26 - 1.65
Studsize
U.S.
mm
1.04 - 2.62
Color
inch
mm
inch
mm
Wire Barrel Also available
in4
Min. Inside Dia
inch
mm
Tape & Small
Reel
Pack
ProCrimper
CertiTetra(SDE)
ReCrimp
Crimp
marks Hand Tool Hand Tool Hand Tool
(best)
(better)
(good)
SDE
Die Set
SDE
Die Set
(Premium) (Commercial)
M2
34140
.218
5.54
.684
17.37
m
.140
3.56
✔
✔
A
47386
59824-1
58433-3
2063030-1
58423-1
M3
34141
.218
5.54
.684
17.37
m
.140
3.56
✔
✔
A
47386
59824-1
58433-3
2063030-1
58423-1
5
M3
34143
.281
7.14
.809
20.55
m
.140
3.56
✔
–
A
47386
59824-1
58433-3
2063030-1
58423-1
6
M3.5
32945
.218
5.54
.684
17.37
m
.125
3.18
✔
–
A
47386
59824-1
58433-3
2063030-1
58423-1
6
M3.5
34142
.218
5.54
.684
17.37
m
.140
3.56
✔
–
A
47386
59824-1
58433-3
2063030-1
58423-1
6
M3.5
32947
.281
7.14
.809
20.55
m
.125
3.18
✔
✔
A
47386
59824-1
58433-3
2063030-1
58423-1
6
M3.5
34144
.281
7.14
.809
20.55
m
.140
3.56
✔
✔
A
47386
59824-1
58433-3
2063030-1
58423-1
6
M3.5
34147
.281
7.14
.809
20.55
m
.140
3.56
✔
✔
A
47386
59824-1
58433-3
2063030-1
58423-1
8
M4
32948
.281
7.14
.809
20.55
m
.125
3.18
✔
–
A
47386
59824-1
58433-3
2063030-1
58423-1
8
M4
34145
.281
7.14
.809
20.55
m
.140
3.56
✔
✔
A
47386
59824-1
58433-3
2063030-1
58423-1
8
M4
32951
.312
7.92
.856
21.74
m
.125
3.18
✔
✔
A
47386
59824-1
58433-3
2063030-1
58423-1
8
M4
34148
.312
7.92
.856
21.74
m
.140
3.56
✔
✔
A
47386
59824-1
58433-3
2063030-1
58423-1
10
34146
.281
7.14
.809
20.55
m
.140
3.56
✔
✔
A
47386
59824-1
58433-3
2063030-1
58423-1
10
35451
.281
7.14
.809
20.55
m
.170
4.32
✔
–
A
47386
59824-1
58433-3
2063030-1
58423-1
10
32952
.312
7.92
.856
21.74
m
.125
3.18
✔
✔
A
47386
59824-1
58433-3
2063030-1
58423-1
10
34149
.312
7.92
.856
21.74
m
.140
3.56
✔
✔
A
47386
59824-1
58433-3
2063030-1
58423-1
58423-1
M5
130014
.315
8.00
.858
21.80
m
.140
3.56
✔
–
A
47386
59824-1
58433-3
2063030-1
1/4
M6
32953
.469
11.91
1.090
27.69
m
.125
3.18
✔
✔
A
47386
59824-1
58433-3
2063030-1
58423-1
1/4
M6
34150
.469
11.91
1.090
27.69
m
.140
3.56
✔
✔
A
47386
59824-1
58433-3
2063030-1
58423-1
1/4
M6
130054
.469
11.91
1.095
27.81
m
.140
3.56
–
–
A
47386
59824-1
58433-3
2063030-1
58423-1
5/16
M8
34151
.469
11.91
1.090
27.69
m
.140
3.56
✔
✔
A
47386
59824-1
58433-3
2063030-1
58423-1
34152
.531
13.49
1.230
31.24
m
.140
3.56
✔
✔
A
47386
59824-1
58433-3
2063030-1
58423-1
6
M3.5
34158
.250
6.35
.715
18.16
m
.170
4.32
✔
✔
A
47387
59824-1
58433-3
2063030-1
58423-1
6
M3.5
34159
.343
8.71
.871
22.12
m
.170
4.32
✔
✔
A
47387
59824-1
58433-3
2063030-1
58423-1
8
M4
328527
.312
7.92
.825
20.96
m
.170
4.32
✔
✔
A
47387
59824-1
58433-3
2063030-1
58423-1
8
M4
32959
.343
8.71
.871
22.12
m
.145
3.68
✔
✔
A
47387
59824-1
58433-3
2063030-1
58423-1
8
M4
10
1/4
5/16
6
34160
.343
8.71
.871
22.12
m
.170
4.32
✔
✔
A
47387
59824-1
58433-3
2063030-1
58423-1
32960
.343
8.71
.871
22.12
m
.145
3.68
✔
✔
A
47387
59824-1
58433-3
2063030-1
58423-1
34161
.343
8.71
.871
22.12
m
.170
4.32
✔
✔
A
47387
59824-1
58433-3
2063030-1
58423-1
M5
130102
.343
8.70
.878
22.30
m
.193
4.90
✔
–
A
47387
59824-1
58433-3
2063030-1
58423-1
M6
34162
.469
11.91
1.090
27.69
m
.170
4.32
✔
✔
A
47387
59824-1
58433-3
2063030-1
58423-1
M6
130126
.469
11.90
1.098
27.90
m
.193
4.90
✔
-
A
47387
59824-1
58433-3
2063030-1
58423-1
34163
.469
11.91
1.090
27.69
m
.170
4.32
✔
✔
A
47387
59824-1
58433-3
2063030-1
58423-1
34164
.531
13.49
1.248
31.70
m
.170
4.32
–
–
A
47387
59824-1
58433-3
2063030-1
58423-1
M10
160136
.657
16.70
1.244
31.60
m
.193
4.90
–
–
A
47387
59824-1
58433-3
2063030-1
58423-1
M3.5
34852
.281
7.14
.953
24.21
m
.250
6.35
✔
✔
A
59239-4
59824-1
58433-3
2063030-1
58423-1
M8
3/8
2.62 - 6.64
Length (L)
2
10
12-10
Width (W)
(see Note 1 for
Tool Options)
5
3/8
16-14
Standard
Part
Number
Dies for Powered Tools
INDUSTRIAL /// PLASTI-GRIP TERMINALS & SPLICES
TE Connectivity
PLASTI-GRIP Terminals & Splices
Ring Tongue Terminals (continued)
Manual Hand Tools
Wire Size
AWG
Studsize
mm2
U.S.
mm
8
M4
6.64 - 10.50
10.5 - 16.8
inch
mm
inch
mm
Tape & Small
Reel
Pack
(best)
(better)
(good)
SDE
Die Set
(Premium) (Commercial)
9.53
1.098
27.89
m
.250
6.35
✔
✔
A
59239-4
59824-1
58433-3
2063030-1
58423-1
7.92
1.052
26.72
m
.230
5.84
✔
–
A
59239-4
59824-1
58433-3
2063030-1
58423-1
10
34854
.375
9.53
1.098
27.89
m
.250
6.35
✔
✔
A
59239-4
59824-1
58433-3
2063030-1
58423-1
M5
160292
.374
9.50
1.098
27.90
m
.252
6.40
✔
–
A
59239-4
59824-1
58433-3
2063030-1
58423-1
1/4
M6
165035
.500
12.70
1.184
30.07
m
.267
6.78
✔
–
A
59239-4
59824-1
58433-3
2063030-1
58423-1
1/4
M6
34855
.531
13.49
1.327
33.71
m
.250
6.35
✔
✔
A
59239-4
59824-1
58433-3
2063030-1
58423-1
5/16
M8
34856
.531
13.49
1.327
33.71
m
.250
6.35
✔
✔
A
59239-4
59824-1
58433-3
2063030-1
58423-1
M8
160296
.500
12.70
1.185
30.10
m
.248
6.30
–
–
A
59239-4
59824-1
58433-3
2063030-1
58423-1
34173
.593
15.06
1.421
36.09
m
.230
5.84
✔
✔
A
59239-4
59824-1
58433-3
2063030-1
58423-1
M10
160300
.594
15.09
1.433
36.40
m
.248
6.30
–
–
A
59239-4
59824-1
58433-3
2063030-1
58423-1
1/2
M12
34837
.750
19.05
1.594
40.49
m
.250
6.35
✔
✔
A
59239-4
59824-1
58433-3
2063030-1
58423-1
8
M4
52041
.478
12.14
1.586
40.28
m
.360
9.14
✔
–
C
B
10
52263
.431
10.95
1.556
39.52
m
.360
9.14
✔
–
10
52263-1
.431
10.95
1.576
40.03
m
.330
8.38
✔
–
B
52041-1
.478
12.14
1.586
40.28
m
.360
9.14
✔
–
C
1/4
M6
5/16
M8
52291
.587
14.91
1.696
43.08
m
.360
9.14
✔
–
C
52291-1
.587
14.91
1.696
43.08
m
.360
9.14
✔
–
C
1/2
M12
52262-1
.875
22.23 1.860
47.24
m
.330
8.38
–
–
A
8
M4
52042-2
.500
12.70
1.869
47.47
m
.436
11.07
–
–
C
52265
.468
11.89
1.719
43.66
m
.436
11.07
✔
✔
B
52042-1
.500
12.70
1.869
47.47
m
.436
11.07
–
–
C
52264
.625
15.88
1.906
48.41
m
.450
11.43
–
–
B
52264-1
.625
15.88
1.906
48.41
m
.450
11.43
–
–
B
1/4
M6
5/16
M8
M12
10
52350
.815
20.70
1.851
47.02
m
.436
11.07
–
–
C
52043-2
.546
13.87
1.948
49.48
m
.450
11.43
✔
–
B
1/4
M6
52043-3
.546
13.87
1.948
49.48
m
.450
11.43
✔
–
B
5/16
M8
52266
.679
17.25
2.014
51.16
m
.515
13.08
–
–
B
B
3/8
26.7 - 42.4
mm
SDE
Die Set
.312
1/2
2
inch
ProCrimper
TetraCerti(SDE)
ReCrimp
Crimp
marks Hand Tool Hand Tool Hand Tool
.375
3/8
16.8 - 26.7
Color
Wire Barrel Also available
in4
Min. Inside Dia
34853
10
4
Length (L)
330518
3/8
6
Width (W)
(see Note 1 for
Tool Options)
10
3/8
8
Standard
Part
Number
Dies for Powered Tools
52266-4
.679
17.25
2.014
51.16
m
.450
11.43
✔
–
1/4
M6
52267-1
.675
17.15
2.071
52.60
m
.560
14.22
–
–
B
1/4
M6
52267
.675
17.15
2.071
52.60
m
.632
16.05
–
–
B
5/16
M8
3/8
52044-1
.711
18.06 2.089
53.06
m
.632
16.05
–
–
B
52044-2
.711
18.06 2.089
53.06
m
.632
16.05
–
–
B
L
W
Multiple Studsize Ring Tongue
Manual Hand Tools
Wire Size
AWG
mm2
Studsize
U.S.
22 - 16
0,26 - 1,65 6 - 10
16- 14
1,04 - 2,62 6 - 10
mm
M3.5
- M5
M3.5
- M5
Standard
Part
Number
Width (W)
Length (L)
Color
inch
mm
inch
mm
54774-1
.325
8.26
.969
24.61
54775-1
.325
8.26
.969
24.61
Wire Barrel Also available
in4
Min. Inside Dia
Tape & Small
Reel
Pack
inch
mm
m
.125
3.18
✔
m
.145
3.68
✔
ProCrimper
CertiTetra(SDE)
ReCrimp
Crimp
marks Hand Tool Hand Tool Hand Tool
Dies for Powered Tools
(see Note 1 for
Tool Options)
SDE
Die Set
SDE
Die Set
(Premium) (Commercial)
(best)
(better)
(good)
–
47386
59824-1
58433-3
2063030-1
58423-1
–
47387
59824-1
58433-3
2063030-1
58423-1
TE.COM/PRODUCTS/PLASTIGRIP
PAGE 5
TE Connectivity
PLASTI-GRIP Terminals & Splices
L
W
Spades: Standard Spade
Manual Hand Tools
Wire Size
Studsize
AWG
mm2
U.S.
22-16
0,26 - 1,65
4
mm
1,04 - 2,62
Length (L)
Color
inch
mm
inch
mm
165004
.218
5.54
.784
19.91
Wire Barrel Also available
in4
Min. Inside Dia
Tape & Small
Reel
Pack
inch
mm
m
.160
4.06
–
ProCrimper
CertiTetra(SDE)
ReCrimp
Crimp
marks Hand Tool Hand Tool Hand Tool
SDE
Die Set
SDE
Die Set
(Premium) (Commercial)
(best)
(better)
(good)
–
47386
59824-1
58433-3
2063030-1
58423-1
M3.5
327043
.250
6.35
.858
21.79
m
.140
3.56
✔
✔
47386
59824-1
58433-3
2063030-1
58423-1
6
M3.5
320665
.297
7.54
.765
19.43
m
.140
3.56
✔
✔
47386
59824-1
58433-3
2063030-1
58423-1
8
M4
34155
.375
9.53
.920
23.37
m
.140
3.56
✔
✔
47386
59824-1
58433-3
2063030-1
58423-1
8
M4
165008
.280
7.11
.831
21.11
m
.142
3.61
✔
–
47386
59824-1
58433-3
2063030-1
58423-1
34156
.375
9.53
.920
23.37
m
.140
3.56
✔
✔
47386
59824-1
58433-3
2063030-1
58423-1
6
M3.5
322994
.297
7.54
.765
19.43
m
.145
3.68
✔
✔
47387
59824-1
58433-3
2063030-1
58423-1
6
M3.5
34165
.385
9.78
.920
23.37
m
.170
4.32
–
–
47387
59824-1
58433-3
2063030-1
58423-1
8
M4
326741
.297
7.54
.765
19.43
m
.170
4.32
✔
–
47387
59824-1
58433-3
2063030-1
58423-1
8
M4
34166
.385
9.78
.920
23.37
m
.170
4.32
✔
✔
47387
59824-1
58433-3
2063030-1
58423-1
8
M4
165012
.250
6.40
.788
20.00
m
.195
4.95
✔
–
47387
59824-1
58433-3
2063030-1
58423-1
34167
.385
9.78
.920
23.37
m
.170
4.32
✔
✔
47387
59824-1
58433-3
2063030-1
58423-1
M5
160171
.385
9.78
.933
23.70
m
.193
4.90
–
–
47387
59824-1
58433-3
2063030-1
58423-1
M4.5
165015
.315
8.00
1.238
31.45
m
.252
6.40
–
–
59239-4
59824-1
58433-3
2063030-1
58423-1
34176
.406
10.31
1.095
27.81
m
.230
5.84
✔
✔
59239-4
59824-1
58433-3
2063030-1
58423-1
165019
.530
13.46
1.307
33.19
m
.252
6.40
–
–
59239-4
59824-1
58433-3
2063030-1
58423-1
10
12-10
Width (W)
(see Note 1 for
Tool Options)
6
10
16-14
Standard
Part
Number
Dies for Powered Tools
2,62 - 6,64
10
1/4
M6
L
W
Spades: Flanged Spade
Manual Hand Tools
Wire Size
Studsize
Standard
Part
Number
AWG
mm2
U.S.
mm
22-16
0,26 - 1,65
6
M3.5
322249
8
M4
10
16-14
1,04 - 2,62
Width (W)
Length (L)
Color
inch
mm
inch
mm
.296
7.52
.749
19.02
324169
.416
10.57
.842
328516
.296
7.52
.749
Wire Barrel Also available
in4
Min. Inside Dia
Tape & Small
Reel Pack
ProCrimper
CertiTetra(SDE)
ReCrimp
Crimp
marks Hand Tool Hand Tool Hand Tool
Dies for Powered Tools
(see Note 1 for
Tool Options)
SDE
Die Set
SDE
Die Set
(Premium) (Commercial)
(best)
(better)
(good)
–
47386
59824-1
58433-3
2063030-1
58423-1
✔
✔
47386
59824-1
58433-3
2063030-1
58423-1
✔
✔
47386
59824-1
58433-3
2063030-1
58423-1
inch
mm
m
.140
3.56
✔
21.39
m
.140
3.56
19.02
m
.140
3.56
6
M3.5
324165
.294
7.47
.749
19.02
m
.170
4.32
✔
✔
47387
59824-1
58433-3
2063030-1
58423-1
8
M4
53874-1
.284
7.21
.749
19.02
m
.170
4.32
✔
–
47387
59824-1
58433-3
2063030-1
58423-1
INDUSTRIAL /// PLASTI-GRIP TERMINALS & SPLICES
TE Connectivity
PLASTI-GRIP Terminals & Splices
Spades: Flanged Spade (continued)
Manual Hand Tools
Wire Size
AWG
12-10
Studsize
mm2
U.S.
2,62 - 6,64
mm
Standard
Part
Number
Width (W)
Length (L)
Color
inch
mm
inch
mm
Wire Barrel Also available
in4
Min. Inside Dia
inch
mm
Tape & Small
Reel Pack
ProCrimper
TetraCerti(SDE)
ReCrimp
Crimp
marks Hand Tool Hand Tool Hand Tool
(best)
(better)
(good)
Dies for Powered Tools
(see Note 1 for
Tool Options)
SDE
Die Set
SDE
Die Set
(Premium) (Commercial)
M5
160213
.294
7.47
.749
19.02
m
.173
4.39
–
–
47387
59824-1
58433-3
2063030-1
58423-1
6
M3.5
324581
.296
7.52
1.017
25.83
m
.230
5.84
✔
✔
59239-4
59824-1
58433-3
2063030-1
58423-1
8
M4
324172
.416
10.57
1.017
25.83
m
.230
5.84
✔
✔
59239-4
59824-1
58433-3
2063030-1
58423-1
52856
.416
10.57
1.017
25.83
m
.250
6.35
✔
–
59239-4
59824-1
58433-3
2063030-1
58423-1
10
L
W
Short Spring Spade
Manual Hand Tools
Wire Size
Studsize
Standard
Part
Number
Width (W)
Length (L)
inch
mm
inch
mm
ProWire Barrel Also available
Crimper
CertiTetrain4
Min. Inside Dia
(SDE)
ReCrimp
Crimp
Color
marks Hand Tool Hand Tool Hand Tool
Tape & Small
(good)
(best)
(better)
inch
mm
Reel
Pack
Dies for Powered Tools
(see Note 1 for
Tool Options)
SDE
Die Set
SDE
Die Set
(Premium) (Commercial)
AWG
mm2
U.S.
mm
22-16
0,26 - 1,65
4
M2.5
52947
.203
5.16
.811
20.60
m
.140
3.56
✔
–
2
47386
59824-1
58433-3
2063030-1
58423-1
5
M3
52948
.250
6.35
.811
20.60
m
.140
3.56
✔
✔
2
47386
59824-1
58433-3
2063030-1
58423-1
6
M3.5
52949
.250
6.35
.811
20.60
m
.140
3.56
✔
✔
2
47386
59824-1
58433-3
2063030-1
58423-1
6
M3.5
53240-1
.234
5.94
.811
20.60
m
.140
3.56
✔
–
2
47386
59824-1
58433-3
2063030-1
58423-1
8
M4
10
16-14
1,04 - 2,62
2,62 - 6,64
.244
6.20
.872
22.15
m
.140
3.56
✔
–
2
47386
59824-1
58433-3
2063030-1
58423-1
.294
7.47
.920
23.37
m
.140
3.56
✔
–
2
47386
59824-1
58433-3
2063030-1
58423-1
6
M3.5
52955
.250
6.35
.811
20.60
m
.170
4.32
✔
✔
2
47387
59824-1
58433-3
2063030-1
58423-1
8
M4
53244-1
.244
6.20
.872
22.15
m
.170
4.32
✔
✔
2
47387
59824-1
58433-3
2063030-1
58423-1
52957
.406
10.31
.920
23.37
m
.170
4.32
✔
✔
2
47387
59824-1
58433-3
2063030-1
58423-1
10
12-10
53241-1
53242-1
6
M3.5
52961
.250
6.35
.959
24.36
m
.200
5.08
✔
–
2
59239-4
59824-1
58433-3
2063030-1
58423-1
8
M4
53247-1
.312
7.92
1.052
26.72
m
.250
6.35
✔
✔
2
59239-4
59824-1
58433-3
2063030-1
58423-1
52963-2
.406
10.31
1.100
27.94
m
.250
6.35
✔
–
2
59239-4
59824-1
58433-3
2063030-1
58423-1
.250
6.35
.945
24.00
m
.140
3.56
✔
✔
2
47386
59824-1
58433-3
2063030-1
58423-1
10
Long Spring Spade
22-16
0,26 - 1,65
6
M3.5
52453
8
M4
52454
.281
7.14
.991
25.17
m
.140
3.56
✔
✔
2
47386
59824-1
58433-3
2063030-1
58423-1
52455
.343
8.71
1.017
25.83
m
.140
3.56
✔
✔
2
47386
59824-1
58433-3
2063030-1
58423-1
10
16-14
1,04 - 2,62
6
M3.5
52463
.250
6.35
.945
24.00
m
.170
4.32
✔
–
2
47387
59824-1
58433-3
2063030-1
58423-1
8
M4
52464
.281
7.14
.991
25.17
m
.170
4.32
✔
✔
2
47387
59824-1
58433-3
2063030-1
58423-1
52465
.343
8.71
1.017
25.83
m
.170
4.32
✔
–
2
47387
59824-1
58433-3
2063030-1
58423-1
52474
.375
9.53
1.174
29.82
m
.200
5.08
✔
–
2
59239-4
59824-1
58433-3
2063030-1
58423-1
52475
.375
9.53
1.219
30.96
m
.200
5.08
✔
–
2
59239-4
59824-1
58433-3
2063030-1
58423-1
10
12-10
2,62 - 6,64
8
10
M4
TE.COM/PRODUCTS/PLASTIGRIP
PAGE 7
TE Connectivity
PLASTI-GRIP Terminals & Splices
L
W
Butt Splices
Manual Hand Tools
Wire Size
Studsize
AWG
mm2
U.S.
26-22
0,10-0,41
n.a.
321026
22-16
0,26 - 1,65
n.a.
n.a.
16-14
12-10
1,04 - 2,62
2,62 - 6,64
mm
Standard
Part
Number
Width (W)
Length (L)
Color
inch
mm
inch
mm
n.a.
.620
15.75
34067
n.a.
1.065
34070
n.a.
1.076
Wire Barrel Also available
in4
Min. Inside Dia
Tape & Small
Reel
Pack
ProCrimper
CertiTetra(SDE)
ReCrimp
Crimp
marks Hand Tool Hand Tool Hand Tool
(best)
(better)
(good)
Dies for Powered Tools
(see Note 1 for
Tool Options)
SDE
Die Set
SDE
Die Set
(Premium) (Commercial)
inch
mm
m
.080
2.03
–
✔
46121
27.05
m
.120
3.05
✔
✔
45160
58433-3
58423-1
27.33
m
.140
3.56
✔
–
45160
58433-3
58423-1
.170
4.32
✔
✔
45160
58433-3
58423-1
–
–
45160
58433-3
58423-1
58423-1
n.a.
34243
n.a.
1.065
27.05
m
n.a.
34203
n.a.
1.065
27.05
m
n.a.
34068
n.a.
1.065
27.05
m
.140
3.56
✔
✔
45575-1
58433-3
58423-1
n.a.
34071
n.a.
1.065
27.05
m
.170
4.32
✔
✔
45575-1
58433-3
58423-1
n.a.
35244
n.a.
1.065
27.05
m
.215
5.46
✔
✔
45575-1
58433-3
58423-1
n.a.
34204
n.a.
1.065
27.05
m
✔
✔
45575-1
58433-3
58423-1
n.a.
34069
n.a.
1.160
29.46
m
.200
5.08
–
–
59489
58433-3
58423-1
n.a.
34072
n.a.
1.160
29.46
m
.230
5.84
✔
✔
59489
58433-3
58423-1
n.a.
34945
n.a.
1.160
29.46
m
.250
6.35
✔
✔
59489
58433-3
58423-1
.083x.171 2.11x4.34
.135x.245 3.43x6.22
1
1
Parrallel Splices
22-16
16-14
12-10
0,26 - 1,65
1,04 - 2,62
2,62 - 6,64
n.a.
34131
n.a.
.760
19.30
m
.120
3.05
–
–
45449
58423-1
n.a.
34132
n.a.
.760
19.30
m
.140
3.56
–
–
45449
58423-1
n.a.
34133
n.a.
.760
19.30
m
.140
3.56
–
–
45450
58423-1
n.a.
34134
n.a.
.760
19.30
m
.170
4.32
–
–
45450
58423-1
n.a.
34135
n.a.
.843
21.41
m
.200
5.08
–
–
59270
58423-1
n.a.
34136
n.a.
.870
22.10
m
.230
5.84
–
–
59270
58423-1
INDUSTRIAL /// PLASTI-GRIP TERMINALS & SPLICES
TE Connectivity
PLASTI-GRIP Terminals & Splices
L
W
Wire Pins (formed)
Manual Hand Tools
Wire Size
Studsize
AWG
mm2
U.S.
mm
22-16
0,26 - 1,65
n.a.
6.71
n.a.
Standard
Part
Number
Width (W)
Length (L)
Color
inch
mm
inch
mm
165143
.071
1.80
.807
20.50
9.91
165167
.071
1.80
.937
6.71
165075
.071
1.80
Wire Barrel Also available
in4
Min. Inside Dia
Tape & Small
Reel
Pack
ProCrimper
CertiTetra(SDE)
ReCrimp
Crimp
marks Hand Tool Hand Tool Hand Tool
Dies for Powered Tools
(see Note 1 for
Tool Options)
SDE
Die Set
SDE
Die Set
(Premium) (Commercial)
(best)
(better)
(good)
–
47386
59824-1
58433-3
2063030-1
58423-1
–
–
47386
59824-1
58433-3
2063030-1
58423-1
–
–
47387
59824-1
58433-3
2063030-1
58423-1
inch
mm
m
.146
3.71
–
23.80
m
.146
3.71
.815
20.70
m
.193
4.90
16-14
1,04 - 2,62
n.a.
n.a.
9.91
165171
.071
1.80
.933
23.70
m
.193
4.90
–
–
47387
59824-1
58433-3
2063030-1
58423-1
12-10
2,62 - 6,64
n.a.
9.91
165085
.102
2.60
1.150
29.21
m
.252
6.40
✔
–
59239-4
59824-1
58433-3
2063030-1
58423-1
L
W
Wire Pins (flat)
Manual Hand Tools
Wire Size
Studsize
AWG
mm2
U.S.
mm
22-16
0,26 - 1,65
n.a.
8.10
16-14
1,04 - 2,62
n.a.
12-10
2,62 - 6,64
n.a.
Standard
Part
Number
Width (W)
Length (L)
Color
inch
mm
inch
mm
131443
.116
2.95
.906
23.00
8.10
131444
.116
2.95
.906
8.40
131445
.165
4.20
1.157
Wire Barrel Also available
in4
Min. Inside Dia
Tape & Small
Reel
Pack
ProCrimper
TetraCerti(SDE)
ReCrimp
Crimp
marks Hand Tool Hand Tool Hand Tool
Dies for Powered Tools
(see Note 1 for
Tool Options)
SDE
Die Set
SDE
Die Set
(Premium) (Commercial)
(best)
(better)
(good)
–
47386
59824-1
58433-3
2063030-1
58423-1
–
–
47387
59824-1
58433-3
2063030-1
58423-1
–
–
59239-4
59824-1
58433-3
2063030-1
58423-1
inch
mm
m
.142
3.60
–
23.00
m
.193
4.90
29.40
m
.252
6.40
L
W
Shur Plugs
Manual Hand Tools
Wire Size
Studsize
AWG
mm2
U.S.
16-14
1,04 - 2,62
n.a.
n.a.
mm
Standard
Part
Number
Width (W)
Length (L)
Color
inch
mm
inch
mm
324227
.156
3.96
.800
20.32
324228
.180
4.57
.773
19.63
Wire Barrel Also available
in4
Min. Inside Dia
Tape & Small
Reel
Pack
inch
mm
m
.193
4.90
–
–
m
.193
4.90
–
–
ProCrimper
CertiTetra(SDE)
ReCrimp
Crimp
marks Hand Tool Hand Tool Hand Tool
Dies for Powered Tools
(see Note 1 for
Tool Options)
SDE
Die Set
SDE
Die Set
(Premium) (Commercial)
(best)
(better)
(good)
3
47387
59824-1
58433-3
2063030-1
58423-1
3
47387
59824-1
58433-3
2063030-1
58423-1
TE.COM/PRODUCTS/PLASTIGRIP
PAGE 9
TE Connectivity
PLASTI-GRIP Terminals & Splices
REMARKS
NOTE 1
A, B, C
SDE die sets can be used with the following powered
tools:
C
ode referring to shape of terminal, see on top
of Ring Tongue Terminals chapter (page 2)
1. O
val expansion
1. 1.75 Ton Battery Tools 2217480-1 or 2217480-2
2. B
rass per ASTM B-36
2. Pro-Crimper Adapter 679304-1 for the 626 Pneumatic
Tool System
3. R
eceptacles only available in PIDG version. Part
numbers 165399-1 and 165429-1 are preferred
4. – S
tandard Part Number also available in Tape & Reel
and/or Small Pack
3. AT-300 Bench Terminator with SDE Adapter 1673663-2
4. A
T-SC MK II Pneumatic Safety Crimping Machine
1-528050-0 with SDE Die Holder 2-525051-8
–S
tandard Part Number is not available in Tape &
Reel and/or Small Pack
For all remarks and additional information see Customer
Drawing on te.com
FREQUENTLY ASKED QUESTIONS TOOLING
Can wires be combined in PLASTI-GRIP terminals?
Yes they can, as long total CMA and insulation
diameter fall within specification.
1
2
Are TE PLASTI-GRIP terminals MIL specified?
No, PLASTI-GRIP terminals are not Military qualified;
Most PIDG and SOLISTRAND terminals are qualified to
SAE AS7928.
What terminal should be used in applications above
above 105 Celsius?
Use STRATO-THERM terminals (catalog 82011).
Why can PLASTI-GRIP terminals handle 600V and
PIDG terminals just 300V?
There is no additional metallic sleeve to support the
crimp (see picture).
Why is there no crimp height given for PLASTI-GRIP
terminals?
It is the geometry of the TE crimping tools which
guarantees the perfect crimp on PLASTI-GRIP
terminals.
INDUSTRIAL /// PLASTI-GRIP TERMINALS & SPLICES
4
3
1. The conical sleeve serves for easier conductor insertion.
2. The coloured insulating sleeve facilitates assignment to
the respective wire range and crimp tooling.
3. Serrations inside the wire sleeve ensure high tensile
strength and conductivity.
4. The insulating sleeve protects and supports the wire
after crimping. The widened insulating sleeve allows a
large number of insulation diameters.
TE Connectivity
PLASTI-GRIP Terminals & Splices
UNDERSTAND YOUR TE TOOLING OPTIONS
Commerical Portable Tools
Premium Portable Tools
CERTI Crimp HHHT
58433-3 - PRO-CRIMPER
Commercial Hand Tool
(crimps most 26-10
AWG SOLISTRAND)
SDE Micro
Battey Tool
CERTI Crimp 1.5
TOA Battery Tool
SDE
Die Sets
CERTI Crimp DAHT
Hydraulic Tooling
Shenk Dies
U Dies
Battery Tools
Medium Duty Crimp Heads
Hydraulic Pump
http://tooling.te.com
For questions about our connectivity solutions, please go to te.com.
TE.COM/PRODUCTS/PLASTIGRIP
PAGE 11
www.te.com/products/industrial-terminals-splices
© 2018 TE Connectivity Ltd. family of companies All Rights Reserved.
TE Connectivity and TE Connectivity (logo) are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE
Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth
in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages
arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such
product for the specific application.
6-1773465-8 09/18
INDUSTRIAL /// PLASTI-GRIP TERMINALS & SPLICES
工商网监
湘ICP备2023018690号
