350810-2

GLOW WIRE, V-0 UNIVERSAL MATE-N-LOK CONNECTOR HOUSINGS AND HEADERS Meet the requirement of IEC 60335-1 and UL V-0 Place hero product image here shorter square image space available. Wire-to-wire/wire-to-panel/wire-to-board types Universal MATE-N-LOK cap and plug housings, as well as headers, are now available in material meeting the Glow Wire test (GWT) requirement according to IEC 60335-1 5th edition (750°C, without flame), plus the requirements of UL 94 V-0. Based on the well-established 6.35mm (0.25”) centerline pitch, the new housings are compatible with standard Universal MATE-N-LOK pins and sockets. Given that they meet both the GWT and V-0 requirements, the new housings and headers are targeted for use by manufacturers of appliances and other goods for the European and American markets. The housings are offered with 2, 3, 4, 5 and 10 positions in a single row configuration. Additionally, there are two row, 6 position models, three row, 9 position models and four row, 12 position models. All are natural color, PA 66 material. The caps are designed for panel mounting, but can also be used in free-hanging applications. The headers are offered with either pins or sockets. Single row models with 2, 3, 4, 5, 6 or 8 positions are offered in vertical and right angle versions. Double row 6 position and triple row 9 position models are offered as vertical headers. CAP AND PLUG HOUSINGS KEY FEATURES ELECTRICAL • Familiar locking latch • Voltage rating: 600VAC • Pins and sockets can be intermixed in the same housing • Current rating: 19A max. • Positive polarization & rear cavity identification MECHANICAL • For wire-to-wire and wire-to-panel application • Compatible with standard MATE-N-LOK contacts for 3010 AWG (.05-5.0 mm2) wire sizes • Positions: • May be upgraded to splash proof (IP57) system by using optional seals and contacts. • Centerline pitch: 6.35mm (0.25”) • Operating temperature: -55 to 125°C • Compliant with Glow Wire test required by IEC/EN 60335-1 5th edition: Household and Similar AppliancesSafety and UL 94 V-0. • Panel thickness: Caps will accommodate .76 - 2.29mm (.03 - .09”) APPLICATIONS • HVAC equipment • Nylon (PA 66) meeting Glow Wire test (750°C, without flame) required by IEC/EN 60335-1 5th edition and UL 94 V-0. • Industrial machinery STANDARDS • Other products requiring compliance to IEC 60335-1 and UL 94 V-0 • IEC/EN 60335-1 5th edition: Household and Similar Appliances-Safety SPECIFICATIONS • UL 94 V-0 • Insulation capability to .200 (5.08) diameter • Household appliances • Product specification: 108-1031 • Application specification: 114-1010 2, 3, 4, 5 and 10, single row; 6, dual row; 9, three row; 12, four row MATERIAL • UL Recognized, file E28476 • CSA Certified, file LR7189 • VDE Approved, certificate 40023469 APPLIANCES /// UNIVERSAL MATE-N-LOK CONNECTORS MEETING GWT AND V-0 REG.-Nr. 6328 GLOW WIRE, V-0 HOUSINGS AND HEADERS Universal MATE-N-LOK Connectors HOUSINGS PRODUCT OFFERING Positions Rows Cap Housing Meeting GWT and V-0* Plug Housing Meeting GWT and V-0* 2 1 1-1703062-2 1-1703061-2 3 1 2178474-2 2178473-2 4 1 926305-7 926298-7 5 1 350810-2 350809-3 6 2 2178773-1 1-1644055-2 9 3 927231-7 1-1863003-2 10 1 926309-7 1-1863004-2 12 4 1-1863006-2 1-1863005-2 *Glow Wire test required by IEC/EN 60335-1 5th edition: Household and Similar Appliances-Safety and UL 94 V-0. HEADERS KEY FEATURES ELECTRICAL • Choice of pin or socket headers • Voltage rating: 600VAC • For wire-to-board applications • Current rating: 18A (wire to board vertical) • Compatible with standard MATE-N-LOK housings and contacts for 30-10 AWG (.05-5.0 mm2) wire sizes • Nylon (PA66) glow wire compliant 750°C no flame meets IEC 60335-1 5th edition and UL 94 V-0 MECHANICAL • Positions: 2-6, 8 & 9 • Centerline pitch: 6.35mm (0.25”) APPLICATIONS • Household appliances • Desktop computers • Indoor / outdoor lighting • Security systems • Industrial controls • HVAC control systems • Storage and networking systems SPECIFICATIONS • Product specification 108-1053 • Operating temperature: -55 to 125°C MATERIAL • Nylon (PA 66) meeting Glow Wire test (750°C, without flame) required by IEC/EN 60335-1 5th edition and UL 94 V-0. STANDARDS • IEC/EN 60335-1 5th edition: Household and Similar Appliances-Safety • UL 94 V-0 • UL recognized, file E28476 • Application specification 114-1010 • Instruction sheet 408-7714 APPLIANCES /// UNIVERSAL MATE-N-LOK CONNECTORS MEETING GWT AND V-0 PAGE 2 GLOW WIRE, V-0 HOUSINGS AND HEADERS Universal MATE-N-LOK Connectors HEADERS PRODUCT OFFERING Positions Type Configuration Header Meeting GWT and V-0* 2 Pin 1 x 2, right angle 1969796-1 2 Pin 1 x 2, vertical 1969798-1 2 Pin 1 x 2, vertical, polarized 1969799-1 2 Socket 1 x 2, right angle 1969797-1 2 Socket 1 x 2, vertical, with drain holes 1969795-1 3 Pin 1 x 3, right angle 1586892-3 3 Pin 1 x 3, vertical 1969803-1 3 Socket 1 x 3, right angle 1586893-3 3 Socket 1 x 3, vertical 1969800-1 4 Pin 1 x 4, right angle 1969805-1 4 Pin 1 x 4, vertical 1969807-1 4 Socket 1 x 4, right angle 1969806-1 4 Socket 1 x 4, vertical, with drain holes 1969804-1 5 Pin 1 x 5, right angle 1969808-1 5 Pin 1 x 5, vertical 1969809-1 6 Pin 1 x 6, right angle 1969812-1 6 Socket 1 x 6, right angle 1969813-1 6 Socket 1 x 6, vertical 1969830-1 6 Pin 2 x 3, vertical 1969814-1 6 Socket 2 x 3, vertical 1969811-1 8 Pin 1 x 8, right angle 1969815-1 8 Socket 1 x 8, right angle 1969816-1 9 Pin 3 x 3, vertical 1969818-1 9 Socket 3 x 3, vertical 1969817-1 *Glow Wire test required by IEC/EN 60335-1 5th edition: Household and Similar Appliances-Safety and UL 94 V-0. TE Connectivity, TE, TE connectivity (logo) and MATE-N-LOK are trademarks of the TE Connectivity Ltd. family of companies. Other products, logos and company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES REGARDING THE I NFORMATION CONTAINED HEREIN, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. In no event will TE be liable for any direct, indirect, incidental, special or consequential damages arising from or related to recipient’s use of the information. It is the sole responsibility of recipient of this information to verify the results of this information using their engineering and product environment. Recipient assumes any and all risks associated with the use of the information. www.te.com © 2016 TE Connectivity Ltd. family of companies. All Rights Reserved. 1-1773863-2 APP CS 6/2016 APPLIANCES /// UNIVERSAL MATE-N-LOK CONNECTORS MEETING GWT AND V-0