3560680KJT

SMD High Powered Resistors - AEC-Q200 QUALIFIED Type 3560 Series Key Features 6W@70°C in 4527 size package Suitable for auto placement Available from distribution Terminal finish matte sn over ni barrier AEC-Q200 Qualified TE Connectivity is pleased to announce that our 3560 high power Thick Film Chip Resistor is now AEC-Q200 Qualified. This sister to our popular 3522 series is suitable for auto placement in volume and for most applications. Supplied as standard on 7 inch Reels of 1000 pieces per reel. Characteristics – Electrical Power Rating @ 70°C Resistance Range Resistance Tolerance 6W Ω ~ MΩ ±1%, ±5% Ω≦R≤ Ω ≤± 400PPM/℃ Temperature Coefficient of Resistance 10Ω< R ≦100Ω≤±200PPM/℃ (TCR) Ω< R ≦ MΩ≤± PPM/℃ Max. Working Voltage 300V Max. Overload Voltage 600V Dielectric Withstanding Voltage 600V Operating Temperature Range -55℃ ～ 155℃ Resistors shall have a rated direct-current (DC) continuous working voltage or an approximate sine-wave root-mean-square (RMS) alternating-current (AC) continuous working voltage at commercial line frequency and waveform corresponding to the power rating, as determined from the following formula : RCWV = √P R Where the calculated RCWV is greater than the stated Max. Working Voltage, the Max. Working Voltage will apply. te.com 1773204-7 Rev. B 04/2023 © 2023 TE Connectivity. All Rights Reserved. TE Connectivity, TE connectivity (logo) and Every Connection Counts are trademarks owned or licensed by TE Connectivity. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. SMD High Powered Resistors - AEC-Q200 QUALIFIED Power Rating and Derating Resistors shall have a power rating based on continuous load operation at an ambient temperature of 70 ℃ . For temperature in excess of 70 ℃ , The load shall derate as shown in chart below. Construction and Dimensions: Type 3560 te.com L 11.6 ± 0.30 Dimensions (mm) W H ℓ 6.85 ± 0.25 1.10 ± 0.10 1.00 ± 0.20 ℓ 2.50 ± 0.20 1773204-7 Rev. B 04/2023 © 2023 TE Connectivity. All Rights Reserved. TE Connectivity, TE connectivity (logo) and Every Connection Counts are trademarks owned or licensed by TE Connectivity. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. SMD High Powered Resistors - AEC-Q200 QUALIFIED Environmental Characteristics Characteristics Operational Life Electrical Characterization External Visual Physical Dimension Resistance To Solvent Terminal Strength High Temperature Exposure (storage) Temperature Cycling Limits ± (1.0% + . Ω Max Test Methods 125℃, at 35% of operating power, 1000H(1.5 hours ON , . hour OFF . (MIL-STD-202)