4-1609158-4

HP Series UL Recognized ENEC Approved ROHS Compliant The HP series is the new power entry module developed for medical as well as general purpose applications with EMI suppression up to 12 A. Three options are available within this series: General Purpose, HG option with 1 MOPP(Means of Patient Protection) and NG option with 2 MOOP(Means of Operator Protection) compliance with UL60601. A total of 96 variants are offered for a wide range of different applications, with versatile features, and protection for medical patients & operators. The HP series is suitable for use in Class I or Class II medical equipment (UL60601), such as Dental Lighting, Medical Imaging Equipment, Therapeutic Equipment, Medical X-Ray Equipment, Medical Imaging Systems, Ultrasound Equipment etc. Corcom HP PEM is designed using Eco-design principles, and its housing is made of post-consumer recycled material. Features Applications High Protection Power Entry Module Compatible with V-Lock plug Compact / Light Weight 2 MOOP (double insulated, 3 kV) UL60601 -NG 1 MOPP (grounded, 5 µA leakage) UL60601 -HG DPST Switch with rocker-guard option Compact, flanged or Snap-In Single- or Dual-Fusing Shrouded FASTONs (for Class II protection) General purpose Medical devices Instruments Portable electrical/electronic devices Laboratory equipment Home appliances Office equipment Telecom devices Electrical Schematics Class I, 1 MOOP, General Purpose option Class I, 1 MOPP, -HG Class II, 2 MOOP, -NG INDUSTRIAL/ HP SERIES EMI PEM FILTERS Page 1 Electrical Specifications Maximum leakage current per Line to Ground @120V, 60Hz @250V, 50 Hz General Purpose -HG, -NG 70 µA 140 µA 2 µA 5 µA HIPOT rating (2 s) L-G Class I L-G Class II, (-NG) Line to Line 2250 VAC 3000 VAC 1500 VDC 120/250 VAC 50/60 Hz DPST, 10,000 operations at 51 A max. Inrush 2 X Rated for 8 second † 21 days, 40C @95% RH -40C to 40C† -40C to 85C With IEC 60320 C14 or C18 socket Rated Voltage Operating Frequency Switch Current Overload Humidity Operating Ambient Temperature Storage Temperature Compatible with V-lock Plug † Use 14 AWG power cord for current over 6 A. Limit fault current to 12 A at 40C. Case Styles HPE – Flange type HPS – Snap-In type Class II, IEC 60320 C18 Class I, IEC 60320 C14 6.3 x 0.8 mm output terminals comply with IEC61210. Case Dimensions Part # HPE HPS A 52 34 B 60.5 60.5 INDUSTRIAL/ HP SERIES PEM EMI FILTERS C 43.6 43.6 D 50.7 52.2 E 11.9 10.0 Page 2 Typical Insertion Loss General purpose versions Measured in closed 50-ohm system 3A 6A db db 70 60 50 40 30 20 10 0 70 60 50 40 30 20 10 0 0.01 0.1 1 COMMON MODE 10 0.01 100 10 100 DIFFERENTIAL MODE 12A 10A db 70 70 60 60 50 50 40 40 30 30 20 20 10 10 0 0.1 1 COMMON MODE 10 100 0 0.01 DIFFERENTIAL MODE Typical Insertion Loss 0.1 1 COMMON MODE 10 100 DIFFERENTIAL MODE -NG and -HG versions 3A 6A db db 70 60 50 40 30 20 10 0 70 60 50 40 30 20 10 0 0.01 1 COMMON MODE DIFFERENTIAL MODE db 0.01 0.1 0.1 COMMON MODE 1 10 100 DIFFERENTIAL MODE INDUSTRIAL/ HP SERIES PEM EMI FILTERS 0.01 0.1 COMMON MODE 1 10 100 DIFFERENTIAL MODE Page 3 10A 12A db db 70 70 60 60 50 50 40 40 30 30 20 20 10 10 0 0 0.01 0.1 1 10 COMMON MODE 0.01 100 1 10 COMMON MODE DIFFERENTIAL MODE Minimum Insertion Loss 0.1 100 DIFFERENTIAL MODE General purpose versions INSERTION LOSS [dB] COMMON MODE/ Asymmetrical (Line to Ground) -__ 3 6 10 DIFFERENTIAL MODE / Symmetrical (Line to Line) 12 3 6 10 12 MHz TYP MIN TYP MIN TYP MIN TYP MIN TYP MIN TYP MIN TYP MIN TYP 0.05 9 3 0 0 0 0 0 0 14 8 13 7 14 8 14 MIN 8 0.15 18 12 3 0 1 0 1 0 23 17 23 17 23 17 23 17 0.3 24 18 7 1 3 0 3 0 29 23 29 23 29 23 29 23 0.5 29 23 12 6 6 0 6 0 33 27 34 28 34 28 34 28 1 34 24 17 7 10 0 10 0 37 27 39 29 40 30 40 30 3 45 35 26 16 19 9 19 9 38 28 47 37 56 46 56 46 5 53 43 30 20 24 14 24 14 44 34 47 37 56 46 56 46 10 49 34 36 21 30 15 30 15 60 45 59 44 35 20 35 20 30 30 15 37 22 33 18 33 18 50 35 49 34 47 32 47 32 Minimum Insertion Loss -NG, -HG versions INSERTION LOSS [dB] -NG and COMMON MODE/ Asymmetrical (Line to Ground) -HG MHz 3A TYP 6A 10A DIFFERENTIAL MODE / Symmetrical (Line to Line) 12A 3A MIN TYP MIN TYP MIN TYP MIN TYP 6A MIN TYP 10A MIN TYP 12A MIN TYP MIN 0.05 9 3 0 0 0 0 0 0 14 8 14 8 14 8 14 8 0.15 18 12 3 0 1 0 1 0 23 17 23 17 23 17 23 17 0.3 24 18 7 1 3 0 3 0 29 23 29 23 29 23 29 23 0.5 28 22 11 5 6 0 6 0 33 27 34 28 34 28 34 28 1 31 21 14 4 9 0 9 0 38 28 40 30 40 30 40 30 3 34 24 18 8 12 2 12 2 41 31 48 38 53 43 53 43 5 33 23 18 8 12 2 12 2 41 31 50 40 60 50 60 50 10 30 15 16 1 10 0 10 0 40 25 51 36 51 36 51 36 30 24 9 14 0 9 0 9 0 39 24 46 31 43 28 43 28 INDUSTRIAL/ HP SERIES PEM EMI FILTERS Page 4 Ordering Information (Part Description) EXAMPLE: 12HPENS1 12 A ** FLANGED NO SWITCH GUARD SINGLE-FUSE GENERAL PURPOSE *Class II with insulated FASTONS. ** RATED 12 A UL/CSA, 10 A ENEC. Available Part Numbers Class I, 1 MOOP, General purpose Part Description Part Number Snap-In, Guarded, Single Fuse 3HPSGS1 1-1609158-4 6HPSGS1 1-1609158-5 10HPSGS1 1-1609158-6 12HPSGS1 1-1609158-7 Flanges, Guarded, Single Fuse 3HPEGS1 2-1609158-2 6HPEGS1 2-1609158-3 10HPEGS1 2-1609158-4 12HPEGS1 2-1609158-5 Snap-In, Non-Guarded, Single Fuse 3HPSNS1 3-1609158-0 6HPSNS1 3-1609158-1 10HPSNS1 3-1609158-2 12HPSNS1 3-1609158-3 Flanges, Non-Guarded, Single Fuse 3HPENS1 3-1609158-8 6HPENS1 3-1609158-9 10HPENS1 4-1609158-0 12HPENS1 4-1609158-1 Weight, g 68 68 68 68 80 80 80 80 68 68 68 68 80 80 80 80 Part Description Part Number Snap-In, Guarded, Double Fuse 3HPSGD1 1-1609158-0 6HPSGD1 1-1609158-1 10HPSGD1 1-1609158-2 12HPSGD1 1-1609158-3 Flanges, Guarded, Double Fuse 3HPEGD1 1-1609158-8 6HPEGD1 1-1609158-9 10HPEGD1 2-1609158-0 12HPEGD1 2-1609158-1 Snap-In, Non-Guarded, Double Fuse 3HPSND1 2-1609158-6 6HPSND1 2-1609158-7 10HPSND1 2-1609158-8 12HPSND1 2-1609158-9 Flanges, Non-Guarded, Double Fuse 3HPEND1 3-1609158-4 6HPEND1 3-1609158-5 10HPEND1 3-1609158-6 12HPEND1 3-1609158-7 Weight, g 68 68 68 68 80 80 80 80 68 68 68 68 80 80 80 80 Continued … INDUSTRIAL/ HP SERIES PEM EMI FILTERS Page 5 HG, Class I, 1 MOPP Part Description Part Number Snap-In, Guarded, Double Fuse 3HPSGD1-HG 7-1609158-4 6HPSGD1-HG 7-1609158-5 10HPSGD1-HG 7-1609158-6 12HPSGD1-HG 7-1609158-7 Flanges, Guarded, Double Fuse 3HPEGD1-HG 8-1609158-2 6HPEGD1-HG 8-1609158-3 10HPEGD1-HG 8-1609158-4 12HPEGD1-HG 8-1609158-5 Snap-In, Non-Guarded, Double Fuse 3HPSND1-HG 9-1609158-0 6HPSND1-HG 9-1609158-1 10HPSND1-HG 9-1609158-2 12HPSND1-HG 9-1609158-3 Flanges, Non-Guarded, Double Fuse 3HPEND1-HG 9-1609158-8 6HPEND1-HG 9-1609158-9 10HPEND1-HG 1-1609157-0 12HPEND1-HG 1-1609157-1 Weight, g Weight, g 68 68 68 68 Part Description Part Number Snap-In, Guarded, Double Fuse 3HPSGD1-NG 4-1609158-2 6HPSGD1-NG 4-1609158-3 10HPSGD1-NG 4-1609158-4 12HPSGD1-NG 4-1609158-5 Flanges, Guarded, Single Fuse 3HPEGS1-NG 5-1609158-4 6HPEGS1-NG 5-1609158-5 10HPEGS1-NG 5-1609158-6 12HPEGS1-NG 5-1609158-7 80 80 80 80 Flanges, Guarded, Double Fuse 3HPEGD1-NG 5-1609158-0 6HPEGD1-NG 5-1609158-1 10HPEGD1-NG 5-1609158-2 12HPEGD1-NG 5-1609158-3 80 80 80 80 Snap-In, Non-Guarded, Single Fuse 3HPSNS1-NG 6-1609158-2 6HPSNS1-NG 6-1609158-3 10HPSNS1-NG 6-1609158-4 12HPSNS1-NG 6-1609158-5 68 68 68 68 Snap-In, Non-Guarded, Double Fuse 3HPSND1-NG 5-1609158-8 6HPSND1-NG 5-1609158-9 10HPSND1-NG 6-1609158-0 12HPSND1-NG 6-1609158-1 68 68 68 68 Flanges, Non-Guarded, Single Fuse 3HPENS1-NG 7-1609158-0 6HPENS1-NG 7-1609158-1 10HPENS1-NG 7-1609158-2 12HPENS1-NG 7-1609158-3 80 80 80 80 Flanges, Non-Guarded, Double Fuse 3HPEND1-NG 6-1609158-6 6HPEND1-NG 6-1609158-7 10HPEND1-NG 6-1609158-8 12HPEND1-NG 6-1609158-9 80 80 80 80 Part Description Part Number Snap-In, Guarded, Single Fuse 3HPSGS1-HG 7-1609158-8 6HPSGS1-HG 7-1609158-9 10HPSGS1-HG 8-1609158-0 12HPSGS1-HG 8-1609158-1 Flanges, Guarded, Single Fuse 3HPEGS1-HG 8-1609158-6 6HPEGS1-HG 8-1609158-7 10HPEGS1-HG 8-1609158-8 12HPEGS1-HG 8-1609158-9 Snap-In, Non-Guarded, Single Fuse 3HPSNS1-HG 9-1609158-4 6HPSNS1-HG 9-1609158-5 10HPSNS1-HG 9-1609158-6 12HPSNS1-HG 9-1609158-7 Flanges, Non-Guarded, Single Fuse 3HPENS1-HG 1-1609157-2 6HPENS1-HG 1-1609157-3 10HPENS1-HG 1-1609157-4 12HPENS1-HG 1-1609157-5 Weight, g 68 68 68 68 80 80 80 80 68 68 68 68 80 80 80 80 68 68 68 68 80 80 80 80 68 68 68 68 80 80 80 80 NG, Class II, 2 MOOP (Insulated FASTON) Part Description Part Number Snap-In, Guarded, Single Fuse 3HPSGS1-NG 4-1609158-6 6HPSGS1-NG 4-1609158-7 10HPSGS1-NG 4-1609158-8 12HPSGS1-NG 4-1609158-9 Weight, g 68 68 68 68 te.com Corcom, TE Connectivity, TE, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2022 TE Connectivity. All Rights Reserved. Version 07/2022 INDUSTRIAL/ HP SERIES PEM EMI FILTERS Page 6