AMPMODU Interconnection System
Mod IV Receptacle Assemblies, Single-Row, Outrigger Design
.100 x .100 [2.54 x 2.54] Centerline, End To End Stackable
Dual Entry, End Stackable,
Low Profile, .100 x .100
[2.54 x 2.54] Centerline,
.200 [5.08] Tine Spacing
.125±.010
[3.17±0.25]
Typ.
.020
[0.51]
(Standoffs)
.245
[6.22]
.148
[3.77]
Typ.
A
Point of
Contact
.107
[2.72]
(Localized Gold
Plate Area)
.200±.003
[5.08±0.08]
Typ.
Material and Finish
.140
[3.56]
.053
[1.34]
Typ.
.100
[2.54]
Typ.
B
.075 +.005
-.000
1.90 +0.13
-.000
[
Vertical Mount,
Receptacle Assemblies
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-0.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
]
.200
[5.08]
.140
[3.56]
.035±.003
Dia.
[0.89±0.08]
.100
[2.54]
Typ.
5
Recommended PC Board Hole Layout
No. of
Pos.
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
30
40
Note: All part numbers are RoHS
compliant.
Dimensions
A
B
.300 [7.62]
.200 [5.08]
.400 [10.16]
.300 [7.62]
.500 [12.70]
.400 [10.16]
.600 [15.24]
.500 [12.70]
.700 [17.78]
.600 [15.24]
.800 [20.32]
.700 [17.78]
.900 [22.86]
.800 [20.32]
1.000 [25.40]
.900 [22.86]
1.100 [27.94]
1.000 [25.40]
1.200 [30.48]
1.100 [27.94]
1.300 [33.02]
1.200 [30.48]
1.400 [35.56]
1.300 [33.02]
1.500 [38.10]
1.400 [35.56]
1.600 [40.64]
1.500 [38.10]
1.700 [43.18]
1.600 [40.64]
1.800 [45.72]
1.700 [43.18]
1.900 [48.26]
1.800 [45.72]
2.000 [50.80]
1.900 [48.26]
3.000 [76.20]
2.900 [73.66]
4.000 [101.60]
3.900 [99.06]
Plating A
5-147720-2
5-147720-3
5-147720-4
5-147720-5
5-147720-6
5-147720-7
5-147720-8
5-147720-9
6-147720-0
6-147720-1
6-147720-2
6-147720-3
6-147720-4
6-147720-5
6-147720-6
6-147720-7
6-147720-8
7-147720-8
8-147720-8
8-147720-9
Contact Plating/Part Nos.
Plating B
5-147726-2
5-147726-3
5-147726-4
5-147726-5
5-147726-6
5-147726-7
5-147726-8
5-147726-9
6-147726-0
6-147726-1
6-147726-2
6-147726-3
6-147726-4
6-147726-5
6-147726-6
6-147726-7
6-147726-8
7-147726-8
8-147726-8
8-147726-9
Plating C
5-147727-2
5-147727-3
5-147727-4
5-147727-5
5-147727-6
5-147727-7
5-147727-8
5-147727-9
6-147727-0
6-147727-1
6-147727-2
6-147727-3
6-147727-4
6-147727-5
6-147727-6
6-147727-7
6-147727-8
7-147727-8
8-147727-8
8-147727-9
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension and add .062 [1.57] for recommended board thickness if used in
bottom entry application.
181
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod IV Receptacle Assemblies, Double-Row, Outrigger Design,
.100 x .100 [2.54 x 2.54] Centerline, End to End Stackable
Dual Entry, End Stackable,
Low Profile, .100 x .100
[2.54 x 2.54] Centerline,
.300 [7.62] Tine Spacing
.020
[0.51]
(Standoffs)
.245
[6.22]
Typ.
A
.148
[3.77]
Typ.
.050
[1.27]
Max.
Typ.
Vertical Mount,
Receptacle Assemblies
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze,
plated as follows:
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
5
.107
[2.72]
Typ.
(Localized Gold
Plate Area)
.100±.003
[2.54±0.08]
Material and Finish
Point of
Contact
.300
[7.62]
Typ.
.198
[5.03]
.125±.010
[3.17±0.25]
.100
[2.54]
Typ.
.100
[2.54]
Typ.
B
.100
[2.54]
Typ.
.100
[2.54]
Typ.
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 174
Technical Documents — page 276
Product Specification
108-25022
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult Tyco Electronics.
Keying Plug
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
+.005
-0.00 Dia.
.075
.035±.003 Dia.
[0.89±0.08] Typ.
.060+0.13
1.90
[
-0.00 ]
Typ.
.100
[2.54]
Typ.
Recommended PC Board Hole Layout
No. of
Pos.
2
4
6
8
14
18
20
24
30
36
40
48
50
60
76
80
Dimensions
A
B
.100 [2.54]
—
.200 [5.08]
.100 [2.54]
.300 [7.62]
.200 [5.08]
.400 [10.16]
.300 [7.62]
.700 [17.78]
.600 [15.24]
.900 [22.86]
.800 [20.32]
1.000 [25.40]
.900 [22.86]
1.200 [30.48]
1.100 [27.94]
1.500 [38.10]
1.400 [35.56]
1.800 [45.72]
1.700 [43.18]
2.000 [50.80]
1.900 [48.26]
2.400 [60.96]
2.300 [58.42]
2.500 [63.50]
2.400 [60.96]
3.000 [76.20]
2.900 [73.66]
3.800 [96.52]
3.700 [93.98]
4.000 [101.60]
3.900 [99.06]
Plating A
6-534267-3
6-534267-7
6-534267-4
5-534267-5
5-534267-1
6-534267-0
5-534267-2
5-534267-9
6-534267-2
6-534267-5
5-534267-7
6-534267-1
6-534267-8
5-534267-8
6-534267-6
5-534267-4
Contact Plating/Part Nos.
Plating B
5-147099-1
5-147099-2
5-147099-3
5-147099-4
5-147099-7
5-147099-9
6-147099-0
6-147099-2
6-147099-5
6-147099-8
7-147099-0
7-147099-4
7-147099-5
8-147099-0
8-147099-8
9-147099-0
Plating C
8-147100-9
9-147100-0
5-147100-1
5-147100-2
5-147100-5
5-147100-7
5-147100-8
6-147100-0
6-147100-3
6-147100-6
6-147100-8
7-147100-2
7-147100-3
7-147100-8
8-147100-6
8-147100-8
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the
maximum point-of-contact dimension and .062 for recommended board thickness if used in bottom entry
application.
Note: All part numbers are RoHS compliant.
182
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod. IV Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
.020
[0.51]
Typ.
(Standoffs)
Closed Dual Entry, Side and
End Stackable Low Profile,
.100 x .100 [2.54 x 2.54]
Centerline, .150 [3.81] Tine
Spacing
.245
[6.22]
Typ.
A
.050
[1.27]
Max.
Typ.
Material and Finish
.100±.003
[2.54±0.08]
Technical Documents — page 276
Product Specification
108-25022
Application Specification
114-25018
Note: All part numbers are RoHS
compliant.
.150
[3.81]
Typ.
.198
[5.03]
.107
[2.72]
Typ.
(Localized Gold
Plate Area)
.100
[2.54]
.130±.010
[3.30±0.25]
Typ.
B
.075+.005
-.000
.060
1.90+0.13
-0.00
[
]
B
.100*
[2.54]
Typ.
Dia.
Typ.
No. of
Pos.
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
.100
[2.54]
Typ.
.100
[2.54]
Typ.
Recommended PC Board Hole Layout
for Bottom Entry or Pass Through Applications
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 174
Point of
Contact
Vertical Mount,
Receptacle Assemblies
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze,
plated as follows:
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
.148
[3.77]
Typ.
B
—
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
5
Recommended PC Board Hole Layout
for Top Entry
Dimensions
A
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
.150
[3.81]
Typ.
.035±.003
Dia. Typ.
[0.89±0.08]
Plating A
5-535542-1
5-535542-2
5-535542-3
5-535542-4
5-535542-5
5-535542-6
5-535542-7
5-535542-8
5-535542-9
6-535542-0
6-535542-1
6-535542-2
6-535542-3
6-535542-4
6-535542-5
6-535542-6
6-535542-7
6-535542-8
6-535542-9
7-535542-0
Contact Plating/Part Nos.
Plating B
5-147095-1
5-147095-2
5-147095-3
5-147095-4
5-147095-5
5-147095-6
5-147095-7
5-147095-8
5-147095-9
6-147095-0
6-147095-1
6-147095-2
6-147095-3
6-147095-4
6-147095-5
6-147095-6
6-147095-7
6-147095-8
6-147095-9
7-147095-0
Plating C
5-147096-1
5-147096-2
5-147096-3
5-147096-4
5-147096-5
5-147096-6
5-147096-7
5-147096-8
5-147096-9
6-147096-0
6-147096-1
6-147096-2
6-147096-3
6-147096-4
6-147096-5
6-147096-6
6-147096-7
6-147096-8
6-147096-9
7-147096-0
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension, and .062 [1.57] for recommended board thickness if used in bottom entry application.
183
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod. IV Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
No. of
Pos.
Plating A
7-535542-1
7-535542-2
7-535542-3
7-535542-4
7-535542-5
7-535542-6
7-535542-7
7-535542-8
7-535542-9
8-535542-0
8-535542-1
8-535542-2
8-535542-3
8-535542-4
8-535542-5
8-535542-6
8-535542-7
8-535542-8
8-535542-9
9-535542-0
Contact Plating/Part Nos.
Plating B
7-147095-1
7-147095-2
7-147095-3
7-147095-4
7-147095-5
7-147095-6
7-147095-7
7-147095-8
7-147095-9
8-147095-0
8-147095-1
8-147095-2
8-147095-3
8-147095-4
8-147095-5
8-147095-6
8-147095-7
8-147095-8
8-147095-9
9-147095-0
Plating C
7-147096-1
7-147096-2
7-147096-3
7-147096-4
7-147096-5
7-147096-6
7-147096-7
7-147096-8
7-147096-9
8-147096-0
8-147096-1
8-147096-2
8-147096-3
8-147096-4
8-147096-5
8-147096-6
8-147096-7
8-147096-8
8-147096-9
9-147096-0
Vertical Mount,
Receptacle Assemblies
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
Dimensions
A
B
2.100 [53.34]
2.000 [50.80]
2.200 [55.88]
2.100 [53.34]
2.300 [58.42]
2.200 [55.88]
2.400 [60.96]
2.300 [58.42]
2.500 [63.50]
2.400 [60.96]
2.600 [66.04]
2.500 [63.50]
2.700 [68.58]
2.600 [66.04]
2.800 [71.12]
2.700 [68.58]
2.900 [73.66]
2.800 [71.12]
3.000 [76.20]
2.900 [73.66]
3.100 [78.74]
3.000 [76.20]
3.200 [81.28]
3.100 [78.74]
3.300 [83.82]
3.200 [81.28]
3.400 [86.36]
3.300 [83.82]
3.500 [88.90]
3.400 [86.36]
3.600 [91.44]
3.500 [88.90]
3.700 [93.98]
3.600 [91.44]
3.800 [96.52]
3.700 [93.98]
3.900 [99.06]
3.800 [96.52]
4.000 [101.60]
3.900 [99.06]
5
Note: All part numbers are RoHS compliant.
184
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod IV Surface Mount Vertical Receptacle Assemblies,
.100 x .100 [2.54 x 2.54] Centerline
Product Facts
Surface Mount Leads
■
Contact Material:
phosphor bronze
■
High temperature, black
thermoplastic housings,
94V-0 rated, capable of
withstanding IR or vaporphase reflow
■
Gold/tin duplex plating
for reliable mating
interconnection and solder
interface
■
Metallic hold downs provide
retention in the PC board
prior to and during the
reflow process … and strain
relief after soldering
■
Hold downs provide for
proper lead-to-pad
registration
■
Closed-entry receptacle
housings provide lead-in
ramp for positive mating
■
Receptacle contacts employ
dual cantilever beams for
reliable connections
■
Recognized under the
Component Program
of Underwriters
Laboratories Inc.
File No. E28476
R
■
Certified by
Canadian Standards
Association,
File No. LR 7189
R
The AMPMODU 0.025 [0.64]
square interconnection
system is an industry
standard that has provided
level III and IV thru-hole
interconnections to almost
every industry and
marketplace for years.
As technology advances,
so has the AMPMODU
product line.
Surface mount vertical
receptacle assemblies are
available to meet your level
II packaging needs as
process technologies
evolve from wave soldering
to surface mount reflow
(infrared and vapor-phase)
processes. AMPMODU
surface mount receptacle
assemblies are offered in
vertical dual entry
configurations. These
receptacles are available in
single-row and double-row
configurations with a
contact centerline spacing
of .100 x .100 [2.54 x 2.54].
AMPMODU surface mount
vertical receptacle
assemblies continue to
provide the proven features
and benefits of their
thru-hole counterparts in the
AMPMODU product family.
Closed-entry style housing
design provides a lead-in
ramp for positive mating of
contacts, virtually eliminating
the possibility of stubbing.
The dual-beam receptacle
contact design, coupled with
gold plating in the contact
area, provides a reliable
interface. Tin plating on the
solder tails also enhances
solderability.
Surface Mount Receptacle
Assemblies
■
downs are soldered during
the reflow process and
serve as a strain relief for
the solder joints during
mating/unmating.
The design of the hold
downs results in an
excellent ratio of
insertion/extraction forces
(into the PC board); 20 lb.
[89 N] maximum insertion
force per pair and 10 lb.
[44.5 N] minimum extraction
force per pair (unsoldered).
No tools are required for
insertion.
5
The incorporation of
compliant metallic hold
downs on receptacle
assemblies offers multiple
benefits. The hold downs
provide for proper lead-topad registration and provide
retention to the PC board
prior to and during
processing. Used with a
plated thru-hole, the hold
185
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod IV Surface Mount Vertical Receptacle Assemblies,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Voltage Rating: 250 VAC
Current Rating: 3.0 amperes (max.) for single contact;
2.0 amperes (max.) per contact when connector is fully energized
Operating Temperature Range (Receptacle Assemblies): –65°C to +125°C
Operating Temperature Range (Headers): -65°C to +105°C
Dielectric Withstanding Voltage: 750 VAC
Termination Resistance: 12 milliohms (max.)
Insulation Resistance: 5000 megohms (min.)
Mating Force (Receptacle Assemblies): 9.0 oz. [2.50N] (max.) per contact
Unmating Force (Receptacle Assemblies): 1.5 oz. [0.42N] (min.) per contact
Durability: Tested to 200 cycles (min.) for .000030 [0.00076] gold plated contacts
Surface Mount Receptacle
Assemblies
Performance Specifications
5
186
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod IV Receptacle Assemblies, Single-Row, Surface Mount,
.100 [2.54] Centerline with Compliant Pin Hold Downs
Surface Mount, Single-Row,
Dual Entry with Compliant
Pin Holddowns
[ ]
.030 0.76
.025 0.64
Typ.
.038
[0.97]
.020 Standoffs
[0.51] Typ.
.265
[6.73]
Typ.
.107
[2.72]
D
C
Material and Finish
.100
[2.54] Typ.
D
B
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
3.200 [81.28]
4.300 [109.22]
.228
[5.78]
.075
[1.91]
.042±.003 Dia.
[1.07±0.08]
.090
[2.28] Typ.
.110
[2.79]
.040±.003
C
.060
[1.02±0.08]
[1.52] Min.
Dia. Typ.
(For bottom Recommended PC Board Pad Pattern
entry or pass
(.008 [0.20] thick stencil)
thru applications)
Dimensions
B
C
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.900 [73.66]
4.100 [104.14]
.100
[2.54]
See note 3
See note 3
See note 3
See note 3
See note 3
See note 3
See note 3
See note 3
See note 3
See note 3
See note 3
See note 3
See note 3
See note 3
See note 3
See note 3
See note 3
See note 3
See note 3
2.100 [53.34]
D
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
3.100 [78.74]
4.200 [106.68]
Surface Mount Receptacle
Assemblies
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
30
40
Point of
Contact
.069
[1.75]
P.C. Board
Mateable Headers —
Refer to Mating Post Selection Guide —
page 90
Performance Specifications —
page 186
A
.148
[3.77]
A
Related Product Data
No. of
Pos.
.208
[5.28] Max.
(Depressed)
.140
[3.56]
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
as follows:
Plating A — Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
(Localized Gold
Plate Area)
Packaged in Tubes
Contact Plating/ Part Nos.
Plating A
Plating B
Plating C
5-147744-1 5-147743-1 5-147742-1
5-147744-2 5-147743-2 5-147742-2
5-147744-3 5-147743-3 5-147742-3
5-147744-4 5-147743-4 5-147742-4
5-147744-5 5-147743-5 5-147742-5
5-147744-6 5-147743-6 5-147742-6
5-147744-7 5-147743-7 5-147742-7
5-147744-8 5-147743-8 5-147742-8
5-147744-9 5-147743-9 5-147742-9
6-147744-0 6-147743-0 6-147742-0
6-147744-1 6-147743-1 6-147742-1
6-147744-2 6-147743-2 6-147742-2
6-147744-3 6-147743-3 6-147742-3
6-147744-4 6-147743-4 6-147742-4
6-147744-5 6-147743-5 6-147742-5
6-147744-6 6-147743-6 6-147742-6
6-147744-7 6-147743-7 6-147742-7
6-147744-8 6-147743-8 6-147742-8
7-147744-8 7-147743-8 7-147742-8
8-147744-8 8-147743-8 8-147742-8
.042±.003 Dia.
[1.07±0.08]
.042±.003 Dia.
[1.07±0.08]
5
Packaged in Tape & Reel
Contact Plating/ Part Nos.
Plating A
Plating B
Plating C
5-147724-1
5-147730-1 5-147731-1
5-147724-2
5-147730-2 5-147731-2
5-147724-3
5-147730-3 5-147731-3
5-147724-4
5-147730-4 5-147731-4
5-147724-5
5-147730-5 5-147731-5
5-147724-6
5-147730-6 5-147731-6
5-147724-7
5-147730-7 5-147731-7
5-147724-8
5-147730-8 5-147731-8
5-147724-9
5-147730-9 5-147731-9
6-147724-0
6-147730-0 6-147731-0
6-147724-1
6-147730-1 6-147731-1
6-147724-2
6-147730-2 6-147731-2
6-147724-3
6-147730-3 6-147731-3
6-147724-4
6-147730-4 6-147731-4
6-147724-5
6-147730-5 6-147731-5
6-147724-6
6-147730-6 6-147731-6
6-147724-7
6-147730-7 6-147731-7
6-147724-8
6-147730-8 6-147731-8
7-147724-8
7-147730-8 7-147731-8
8-147724-8
8-147730-8 8-147731-8
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension, and
.062 [1.57] for recommended board thickness if used in bottom entry application
3. No center hold down.
Note: All part numbers are RoHS compliant.
187
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod IV Receptacle Assemblies, Single-Row, Surface Mount, .100 [2.54] x
.100 [2.54] Centerline End To End Stackable without Compliant Pin Holddowns
.020
[0.51] Standoff Typ.
Surface Mount,Single-Row,
Dual Entry, End to End
Stackable
.265
[6.73]
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
as follows:
Plating A — Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Surface Mount Receptacle
Assemblies
.107
[2.72]
Typ.
(Localized Gold
Plate Area)
A
Material and Finish
.100
[2.54] Typ.
.208
[5.28] Max.
.140
[3.56]
.148
[3.77]
Point of
Contact
.040±.003 Dia. Typ.
[1.02±0.08]
(For bottom entry or pass
through applications)
B
.100
[2.54]
.228
[5.78]
Related Product Data
Mateable Headers —
Refer to Mating Post Selection Guide —
page 90
Performance Specifications —
page 186
5
No. of
Pos.
A
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
30
40
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
3.000 [76.20]
4.000 [101.60]
.060
[1.52] Min.
.090
[2.28]
Recommended PC Board Pad Pattern
(.008 [0.20] thick stencil)
Dimensions
B
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.900 [73.66]
3.900 [99.06]
Packaged in Tubes
Contact Plating/ Part Nos.
Plating A
Plating B
Plating C
5-147738-2
5-147737-2
5-147736-2
5-147738-3
5-147737-3
5-147736-3
5-147738-4
5-147737-4
5-147736-4
5-147738-5
5-147737-5
5-147736-5
5-147738-6
5-147737-6
5-147736-6
5-147738-7
5-147737-7
5-147736-7
5-147738-8
5-147737-8
5-147736-8
5-147738-9
5-147737-9
5-147736-9
6-147738-0
6-147737-0
6-147736-0
6-147738-1
6-147737-1
6-147736-1
6-147738-2
6-147737-2
6-147736-2
6-147738-3
6-147737-3
6-147736-3
6-147738-4
6-147737-4
6-147736-4
6-147738-5
6-147737-5
6-147736-5
6-147738-6
6-147737-6
6-147736-6
6-147738-7
6-147737-7
6-147736-7
6-147738-8
6-147737-8
6-147736-8
6-147738-9
6-147737-9
6-147736-9
7-147738-9
7-147737-9
7-147736-9
8-147738-9
8-147737-9
8-147736-9
Packaged in Tape & Reel
Contact Plating/ Part Nos.
Plating A
Plating B
Plating C
5-147723-2
5-147728-2
5-147729-2
5-147723-3
5-147728-3
5-147729-3
5-147723-4
5-147728-4
5-147729-4
5-147723-5
5-147728-5
5-147729-5
5-147723-6
5-147728-6
5-147729-6
5-147723-7
5-147728-7
5-147729-7
5-147723-8
5-147728-8
5-147729-8
5-147723-9
5-147728-9
5-147729-9
6-147723-0
6-147728-0
6-147729-0
6-147723-1
6-147728-1
6-147729-1
6-147723-2
6-147728-2
6-147729-2
6-147723-3
6-147728-3
6-147729-3
6-147723-4
6-147728-4
6-147729-4
6-147723-5
6-147728-5
6-147729-5
6-147723-6
6-147728-6
6-147729-6
6-147723-7
6-147728-7
6-147729-7
6-147723-8
6-147728-8
6-147729-8
6-147723-9
6-147728-9
6-147729-9
7-147723-9
7-147728-9
7-147729-9
8-147723-9
8-147728-9
8-147729-9
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension, and .062 [1.57] for recommended board thickness if used in bottom entry application.
Note: All part numbers are RoHS compliant.
188
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod IV Surface Mount Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centers
Surface Mount,Double Row,
Dual Entry with Holddowns
A
.100
[2.54]
Typ.
.050
[1.27]
Typ.
.198
[5.03]
Material and Finish
.083
[2.12]
Typ.
.020
[0.51]
Typ.
.027±.002
[0.69±0.05] Typ.
.110
[2.79]
Typ.
B
.040±.003
[1.02±0.08]
.100
[2.54] Typ.
.266
[6.75]
.238
[6.05]
Typ.
Surface Mount Receptacle
Assemblies
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
as follows:
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
.107
[2.72]
Typ.
(Localized Gold
Plate Area)
.148 Point of
[3.76] Contact
Typ.
.265
[6.73]
Typ.
.100
[2.54]
Typ.
.004
[0.10]
Typ.
Related Product Data
Mateable Headers —
Refer to Mating Post Selection Guide —
page 90
Performance Specifications —
page 186
.075
[1.91]
Typ.
.090
[2.29]
Typ.
.040±.003
[1.02±0.08]
.040
[1.02]
Typ.
D
(For bottom entry or
pass thru applications)
Technical Documents — page 276
5
.060
[1.52]
Typ.
C
Product Specification
108-25022
Application Specification
114-25018
Recommended PC Board Layout
(.008 [0.20] thick stencil)
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult Tyco Electronics.
Keying Plug
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Note: All part numbers are RoHS compliant.
189
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod IV Surface Mount Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centers (Continued)
No. of
A
Pos.
10
.700 [17.78]
14
.900 [22.86]
20 1.200 [30.48]
22 1.300 [33.02]
26 1.500 [38.10]
30 1.700 [43.18]
34 1.900 [48.26]
36 2.000 [50.08]
40 2.200 [55.88]
46 2.500 [63.50]
50 2.700 [68.58]
62 3.300 [83.82]
64 3.400 [86.36]
66 3.500 [88.90]
70 3.700 [95.98]
80 4.300 [109.22]
Dimensions
B
.400 [10.16]
.600 [15.24]
.900 [22.86]
1.000 [25.40]
1.200 [30.48]
1.400 [35.56]
1.600 [40.64]
1.700 [43.18]
1.900 [48.26]
2.200 [55.88]
2.400 [60.96]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.400 [86.36]
3.900 [99.06]
C
D
.600 [15.24]
.800 [20.32]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
1.600 [40.64]
1.800 [45.72]
1.900 [48.26]
2.100 [53.34]
2.400 [60.96]
2.600 [66.04]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.600 [91.44]
4.200 [106.68]
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
2.100 [53.34]
Packaged in Tubes
Contact Plating/Part Nos.
Plating A
Plating B
Plating C
5-147102-5
5-147101-5 5-147103-5
5-147102-7
5-147101-7 5-147103-7
6-147102-0
6-147101-0 6-147103-0
6-147102-1
6-147101-1 6-147103-1
6-147102-3
6-147101-3 6-147103-3
6-147102-5
6-147101-5 6-147103-5
6-147102-7
6-147101-7 6-147103-7
6-147102-8
6-147101-8 6-147103-8
7-147102-0
7-147101-0 7-147103-0
7-147102-3
7-147101-3 7-147103-3
7-147102-5
7-147101-5 7-147103-5
8-147102-1
8-147101-1 8-147103-1
8-147102-2
8-147101-2 8-147103-2
8-147102-3
8-147101-3 8-147103-3
8-147102-5
8-147101-5 8-147103-5
9-147102-0
9-147101-0 9-147103-0
Packaged in Tape and Reel
Contact Plating/Part Nos.
Plating A
Plating B
Plating C
5-147747-5 5-147746-5 5-147745-5
5-147747-7 5-147746-7 5-147745-7
6-147747-0 6-147746-0 6-147745-0
6-147747-1 6-147746-1 6-147745-1
6-147747-3 6-147746-3 6-147745-3
6-147747-5 6-147746-5 6-147745-5
6-147747-7 6-147746-7 6-147745-7
6-147747-8 6-147746-8 6-147745-8
7-147747-0 7-147746-0 7-147745-0
7-147747-3 7-147746-3 7-147745-3
7-147747-5 7-147746-5 7-147745-5
8-147747-1 8-147746-1 8-147745-1
8-147747-2 8-147746-2 8-147745-2
8-147747-3 8-147746-3 8-147745-3
8-147747-5 8-147746-5 8-147745-5
9-147747-0 9-147746-0 9-147745-0
Surface Mount Receptacle
Assemblies
Notes: 1. No center holddown.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension and
.062 [1.57] for recommended board thickness in bottom entry applications.
5
Note: All part numbers are RoHS compliant.
190
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod IV Surface Mount Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
Surface Mount,Double Row,
Dual Entry
End to End Stackable
A
.100
[2.54] Typ.
.100
[2.54] Typ.
.198±.002
[5.03±0.05]
.050
[1.27]
Max.
.148 Point of
[3.76] Contact
.265
[6.73]
Typ.
Material and Finish
.020
[0.51]
Typ.
.027±.002 Typ.
[0.69±0.05]
.266
[6.75]
Surface Mount Receptacle
Assemblies
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
as follows:
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] tin-lead over
.000050 [0.00127] nickel
.107
[2.72]
(Localized Gold
Plate Area)
.238
[6.05]
Typ.
B
.100
[2.54]
Typ.
.100
[2.54]
Typ.
.004
[0.10]
Typ.
Related Product Data
.090
[2.29]
Mateable Headers —
Refer to Mating Post Selection Guide —
page 90
Performance Specifications —
page 186
.060
[1.52] Typ.
.040
[1.02] Typ.
5
Recommended PC Board Pad Layout
(.008 [0.20] thick stencil)
(for Bottom Entry and Pass Through applications)
Technical Documents — page 276
Product Specification
108-25022
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult Tyco Electronics.
Keying Plug
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Note: All part numbers are RoHS compliant.
191
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod IV Surface Mount Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
No. of
Pos.
Dimensions
A
10
14
20
22
26
30
34
36
40
46
50
62
64
66
70
80
.500 [12.70]
.700 [17.78]
1.000 [25.40]
1.100 [27.94]
1.300 [33.02]
1.500 [38.10]
1.700 [43.18]
1.800 [45.72]
2.000 [50.80]
2.300 [58.42]
2.500 [63.50]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.500 [88.90]
4.000 [101.60]
B
.400 [10.16]
.600 [15.24]
.900 [22.86]
1.000 [25.40]
1.200 [30.48]
1.400 [35.56]
1.600 [40.64]
1.700 [43.18]
1.900 [48.26]
2.200 [55.88]
2.400 [60.96]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.400 [86.36]
3.900 [99.06]
Packaged in Tubes
Contact Plating/ Part Nos.
Plating A
Plating B
Plating C
5-147741-5
5-147740-5
5-147739-5
5-147741-7
5-147740-7
5-147739-7
6-147741-0
6-147740-0
6-147739-0
6-147741-1
6-147740-1
6-147739-1
6-147741-3
6-147740-3
6-147739-3
6-147741-5
6-147740-5
6-147739-5
6-147741-7
6-147740-7
6-147739-7
6-147741-8
6-147740-8
6-147739-8
7-147741-0
7-147740-0
7-147739-0
7-147741-3
7-147740-3
7-147739-3
7-147741-5
7-147740-5
7-147739-5
8-147741-1
8-147740-1
8-147739-1
8-147741-2
8-147740-2
8-147739-2
8-147741-3
8-147740-3
8-147739-3
8-147741-5
8-147740-5
8-147739-5
9-147741-0
9-147740-0
9-147739-0
Packaged in Tape & Reel
Contact Plating/ Part Nos.
Plating A
Plating B
Plating C
5-147105-5
5-147104-5
5-147106-5
5-147105-7
5-147104-7
5-147106-7
6-147105-0
6-147104-0
6-147106-0
6-147105-1
6-147104-1
6-147106-1
6-147105-3
6-147104-3
6-147106-3
6-147105-5
6-147104-5
6-147106-5
6-147105-7
6-147104-7
6-147106-7
6-147105-8
6-147104-8
6-147106-8
7-147105-0
7-147104-0
7-147106-0
7-147105-3
7-147104-3
7-147106-3
7-147105-5
7-147104-5
7-147106-5
8-147105-1
8-147104-1
8-147106-1
8-147105-2
8-147104-2
8-147106-2
8-147105-3
8-147104-3
8-147106-3
8-147105-5
8-147104-5
8-147106-5
9-147105-0
9-147104-0
9-147106-0
Surface Mount Receptacle
Assemblies
Notes: 1. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension and
.062 [1.57] for recommended board thickness in bottom entry applications.
5
Note: All part numbers are RoHS compliant.
192
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Two-Piece Printed Circuit Board Connectors
Product Facts
Two-Piece reliability
■
Two- and three-row systems
available
■
Short signal path for VLSI
applications
■
Receptacles employ dual
cantilever beams and builtin anti-overstress to provide
reliable connections
■
Built-in guides provide
alignment before contact
engagement
■
Closed entry receptacle
housings provide lead-in
ramp for positive mating of
contacts
■
Shrouded headers provide
full pin protection
■
Polarized headers
■
Vertical headers available
with ACTION PIN posts or
.025 [0.64] square solder
posts
■
Repairable ACTION PIN
posts
■
Simple seating tooling for
headers with ACTION PIN
posts
■
Recognized under the
Component Program
of Underwriters
Laboratories Inc.,
File No. E28476
■
Printed Circuit Board
Connectors
■
ACTION PIN Posts
Solder Posts
5
R
Certified by Canadian
Standards
Association,
File No. LR 7189
Receptacle Contact
(Double Beam with Anti-Overstress)
Board Retention Feature Available
R
3-Row Closed Entry
Receptacle 5-534974-8
3-Row Header
5-103264-3
5-532956-3 Horizontal
Receptacle
5-534972-2 Vertical
Receptacle
5-102690-3
Vertical Header
with ACTION PIN
Posts
Double-Row
Make First/Break
Last Header
(Part Nos. available
upon request)
6-102589-2 3/4 Shroud,
Right Angle Header
Note: All part numbers are RoHS
compliant.
5-532956-3 Horizontal
Receptacle
For drawings, technical data or samples,
contact your Tyco Electronics sales engineer or call the Tyco Electronics Product
Information Center: 1-800-522-6752
193
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Two-Piece Printed Circuit Board Connectors (Continued)
AMPMODU Two-Piece
Printed Circuit Board
connectors are designed
to reliably and economically
meet the packaging and
interconnection requirements
of today’s sophisticated
electronics.
The double row system is
produced in 10 thru 200
positions in the vertical
headers and horizontal
receptacles, and 10 thru
160 positions in the right
angle headers and vertical
receptacles.
Performance Specifications
Printed Circuit Board
Connectors
Current Rating —
3 amperes max. for single contact;
2 amperes max. per contact for fully
energized connector
Voltage Rating — 250 VAC
Dielectric Rating — 750 VAC rms
between contacts for one minute
Termination Resistance —
12 milliohms max. at 100 milliamperes
test current, and 50 millivolts open circuit voltage
Insulation Resistance — 1000
megohms after temperature/humidity
cycling
The AMPMODU three-row
connector system is
produced in 30 through 300
positions (straight post
headers and mating
horizontal receptacles).
Both two- and three-row
vertical headers are
available with press-fit
ACTION PIN posts or
standard .025 [0.64] square
solder posts. There is a
simple seating tool for
headers with ACTION PIN
posts.
A board retention feature
is offered in the two-row
horizontal receptacles,
two-row right angle headers
and two- and three-row
vertical headers. Built-in
guides assure accurate
header and receptacle
alignment before contact
engagement.
Closed entry receptacle
housings provide a lead-in
ramp for positive mating of
contacts.
Temperature Rating —
Headers and Receptacles —
–65°C to +125°C (black thermoplastic
housings, 94V-0 rated)
Durability (Tested to) — 200 cycles
for .000030 [0.00076] gold plating;
75 cycles for .000015 [0.00038] gold
plating
Mating Force — 8 oz. [2.22N]
maximum per contact
Unmating Force — .75 oz. [0.2N]
minimum per contact during third
mating cycle
5
194
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Receptacle Assemblies, Board Mount, Double-Row,
Closed Entry, .100 x .100 [2.54 x 2.54] Centerline
Horizontal Mount (with Guide
Pin Slots and Standoffs)
.320
[8.13]
.174
Max.
[4.42]
(Point of Contact)
A
Material and Finish
.179
[4.55]
Typ.
B
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050.000100 [0.00127-0.00254] matte tin on
solder area, with entire contact underplated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000050-.000100 [0.00127-0.00254]
matte tin on solder area, with entire contact underplated .000050 [0.00127]
nickel
.100
[2.54]
.238
[6.05]
.144
Dia.
[3.66]
(2 Plc.)
.069
[1.75]
.115 or .145
[2.92 or 3.68]
(See Note 1)
Related Product Data
.035±.003
[0.89±0.08] Typ. Dia.
(Finished Hole)
12
14
16
20
24
30
36
40
50
60
70
72
80
86
90
96
100
110
120
130
200
.858 [21.79]
.958 [24.33]
1.058 [26.87]
1.258 [31.95]
1.458 [37.03]
1.758 [44.65]
2.058 [52.27]
2.258 [57.35]
2.758 [70.05]
3.258 [82.75]
3.758 [95.45]
3.858 [97.99]
4.258 [108.15]
4.558 [115.77]
4.758 [120.85]
5.058 [128.47]
5.258 [133.55]
5.758 [146.25]
6.258 [158.95]
6.758 [171.65]
10.258 [260.55]
CL
.310±.010
[7.88±0.25]
B
.500 [12.70]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.100 [27.94]
1.400 [35.56]
1.700 [43.18]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
3.400 [86.36]
3.500 [88.90]
3.900 [99.06]
4.200 [106.68]
4.400 [111.76]
4.700 [119.38]
4.900 [124.46]
5.400 [137.16]
5.900 [149.86]
6.400 [162.56]
9.900 [251.46]
Keying Plug
.065±.005
[1.65±0.13]
to
.100±.005
[2.54±0.13]
.100±.003
[2.54±0.08]
Tolerances not to accumulate within
one connector pattern.
Dimensions
A
Board Retention Tails
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Additional receptacle assembly
sizes and solder tail lengths
are available; minimum order
quantities may apply. Consult
Tyco Electronics.
No. of
Pos.
CL
Printed Circuit Board
Connectors
Standard Solder Tails
.310±.002
[7.87±0.05]
Technical Documents — page 276
.125
[3.17]
(Localized
Gold Plate Area)
.115
[2.92]
(See Note 2)
.115 or .145
[2.92 or 3.68]
(See Note 2)
Mateable Headers — pages 198, 199
Performance Specifications —
page 194
Product Specification
108-25017
Application Specification
114-9009
.256
Min.
[6.50]
(See Note 3.)
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
5
Receptacle Assembly Part Nos.
Receptacle Assembly Part Nos.
with .115 [2.92] Solder Tail Lengths
with .145 [3.68] Solder Tail Lengths
Standard Solder Tails
Board Retention Tails
Standard Solder Tails
Plating A
Plating B
Plating A
Plating B
Plating A
5-532956-1
5-532955-1
5-534204-2
5-534975-5
5-533009-1
—
7-532955-5
—
—
—
5-532956-2
—
6-534204-0
6-534975-5
—
5-532956-3
5-532955-3
5-534204-9
5-534975-6
—
5-532956-4
5-532955-4
6-534204-1
5-534975-7
—
5-532956-5
5-532955-5
5-534204-4
5-534975-8
5-533009-5
5-532956-6
5-532955-6
5-534204-3
5-534975-9
—
5-532956-7
5-532955-7
6-534204-2
6-534975-0
—
5-532956-8
5-532955-8
5-534204-1
6-534975-1
5-533009-8
5-532956-9
5-532955-9
5-534204-5
6-534975-2
5-533009-9
6-532956-0
6-532955-0
6-534204-3
6-534975-3
6-533009-0
6-532956-1
6-532955-1
6-534204-4
—
—
6-532956-2
6-532955-2
5-534204-8
6-534975-4
6-533009-2
6-532956-3
6-532955-3
—
—
6-533009-3
6-532956-4
6-532955-4
—
—
—
6-532956-5
6-532955-5
6-534204-5
—
6-533009-5
6-532956-6
6-532955-6
5-534204-6
5-534975-1
6-533009-6
6-532956-7
6-532955-7
6-534204-6
—
—
6-532956-8
6-532955-8
5-534204-7
5-534975-2
6-533009-8
7-532956-0
7-532955-0
6-534204-7
—
—
7-532956-3
7-532955-3
7-534204-0
5-534975-4
—
Notes: 1. .115 [2.92] tail length is for use with .062 [1.57] PC boards; .145 [3.68] tail length is for use with .093 [2.36] PC boards.
Notes: 2. Receptacle assemblies with low force contacts are available, consult Tyco Electronics.
Note: All part numbers are RoHS compliant.
3. .256 [6.50] minimum positive pin stop to prevent shorting between rows.
195
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Receptacle Assemblies, Board Mount, Double-Row,
Closed Entry, .100 x .100 [2.54 x 2.54] Centerline (Continued)
Vertical Mount
(with Guide Pin Slots and
Standoffs)
.115
[2.92]
.129
Typ.
[3.28]
.410
[10.41]
.320
[8.13]
Material and Finish
.100
Typ.
[2.54]
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, duplex
plated .000030 [0.00076] gold on
contact area, .000050-.000100
[0.00127-0.00254] matte tin on solder
area, with entire contact underplated
.000050 [0.00127] nickel
±.008
B [±0.20]
.238
[6.05]
.144
[3.68]
Dia.
.069
[1.75]
Typ.
A
Related Product Data
Printed Circuit Board
Connectors
.100
[2.54]
.100
[2.54]
.100±.003
[2.54±0.08]
Mateable Headers — pages 198, 199
Performance Specifications —
page 194
.035±.003
Typ. Dia.
[0.89±0.08]
.100±.003
[2.54±0.08]
Technical Documents — page 276
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Product Specification
108-25017
Tolerances not to accumulate within one
connector pattern.
Application Specification
114-9009
5
.125
[3.18]
(Localized
Gold Plate Area)
.179
Typ.
[4.55]
Additional receptacle assembly
sizes and solder tail lengths
are available; minimum order
quantities may apply. Consult
Tyco Electronics.
No. of
Pos.
30
40
50
60
70
80
90
100
120
Keying Plug
Dimensions
A
B
1.758 [44.65]
1.400 [35.56]
2.258 [57.35]
1.900 [48.26]
2.758 [70.05]
2.400 [60.96]
3.258 [82.75]
2.900 [73.66]
3.758 [95.45]
3.400 [86.36]
4.258 [108.15]
3.900 [99.06]
4.758 [120.85]
4.400 [111.76]
5.258 [133.55]
4.900 [124.46]
6.258 [158.95]
5.900 [149.86]
Receptacle Assembly
Part Nos.
5-534972-1
5-534972-2
5-534972-3
5-534972-4
5-534972-5
5-534972-6
5-534972-7
5-534972-8
6-534972-0
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Note: All part numbers are RoHS compliant.
196
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Receptacle Assemblies, Board Mount, Triple-Row,
Closed Entry, .100 x .100 [2.54 x 2.54] Centerline
Horizontal Mount
(with Guide Pin Slots and
Standoffs)
A
.410
[10.41]
.179
Typ.
[4.55]
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
.000030 [0.00076] gold in mating area,
.000050-.000100 [0.00127-0.00254]
matte tin on solder area, with entire
contact underplated .000050 [0.00127]
nickel
.100
Typ.
[2.54]
.125
[3.18]
(Localized
Gold Plate Area)
B
.100
[2.54]
.338
[8.59]
.144
[3.66]
Dia.
Typ.
.069
[1.75]
.100
[2.54]
.115
[2.92]
.145
[3.68]
.300
[7.62]
.400
[10.16]
Related Product Data
.115
[2.92]
.145
[3.68]
Printed Circuit Board
Connectors
Mateable Headers — page 201
Performance Specifications —
page 194
Tail Length
Technical Documents — page 276
.035±.003
Typ. Dia.
[0.89±0.08]
.100±.003
[2.54±0.08]
Product Specification
108-25017
Application Specification
114-9009
.400
[10.16]
Additional receptacle assembly
sizes and solder tail lengths
are available; minimum order
quantities may apply. Consult
Tyco Electronics.
.300
[7.62]
.065±.005
[1.65±0.13]
5
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Tolerances not to accumulate within one
connector pattern.
No. of
Pos.
72
93
96
150
210
Keying Plug
Dimensions
A
B
2.658 [67.51]
2.300 [58.42]
3.358 [85.29]
3.000 [76.20]
3.458 [87.83]
3.100 [78.74]
5.258 [133.55]
4.900 [124.46]
7.258 [184.35]
6.900 [175.26]
Receptacle Assembly Part Nos.
Plating A
5-534974-3
15-534974-4
1-5-534974-5
1-5-534974-8
6-534974-1
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Note: All part numbers are RoHS compliant.
197
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Headers, Straight Post, Double-Row, .100 x .100 [2.54 x 2.54] Centerline
Solder Posts and
ACTION PIN Posts
(with Pin Protection
and Guide Pins)
Pos.
Ref.
.065
R
[1.66]
(2 Plc.)
1 2 3
.100
[2.54]
.515
[13.08]
.085
[2.16]
.200
[5.08]
.130
[3.30]
(2 Plc.)
B
.040
[1.02]
(4 Sides)
A
Material and Finish
Printed Circuit Board
Connectors
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Plating C — Selectively plated .000030
[0.00076] gold on contact area and
.000015 [0.00038] gold on termination
end, with gold flash over .000050
[0.00127] nickel on entire post
.200
[5.08]
(Localized
Gold Plate
Area)
.110
[2.79]
.320
[8.13]
.440
[11.18]
.130
[3.30]
Board Retention Tails
(where indicated)
.040±.003
[1.02±0.08]
(Finished Hole)
.100±.003
[2.54±0.08]
.090
[2.29]
.180
[4.57]
.180
[4.57]
.0453±.001
[1.02±0.03]
(Drilled Hole)
.100±.003
[2.54±0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
.025 [0.64] Square
Board Retention Tails
Tolerances not to accumulate within one connector pattern.
5
Related Product Data
Mateable Receptacles —
pages 195, 196
Performance Specifications —
page 194
ACTION PIN Posts —pages 150, 151
Application Tooling —pages 152
Technical Documents — page 276
Product Specification
108-25017
Application Specification
114-9009
Additional header sizes are
available; minimum order
quantities may apply. Consult
Tyco Electronics.
Dimensions
No. of
Pos.
12
14
16
20
24
30
36
40
50
60
70
72
80
86
90
96
100
110
120
130
200
A
.980 [24.89]
1.080 [27.43]
1.180 [29.97]
1.380 [35.05]
1.580 [40.13]
1.880 [47.75]
2.180 [55.37]
2.380 [60.45]
2.880 [73.15]
3.380 [85.85]
3.880 [98.55]
3.980 [101.09]
4.380 [111.25]
4.680 [118.87]
4.880 [123.95]
5.180 [131.57]
5.380 [136.65]
5.880 [149.35]
6.380 [162.05]
6.880 [174.75]
10.380 [263.65]
B
.500 [12.70]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.100 [27.94]
1.400 [35.56]
1.700 [43.18]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
3.400 [86.36]
3.500 [88.90]
3.900 [99.06]
4.200 [106.68]
4.400 [111.76]
4.700 [119.38]
4.900 [124.46]
5.400 [137.16]
5.900 [149.86]
6.400 [162.56]
9.900 [251.46]
Header Part Nos. with .180 [4.57] Tail Length
Standard Solder Tails
Board Retention Tails
Plating A
Plating B
Plating A
Plating B
5-102692-1 5-102567-1
6-534978-6
5-534257-5
—
7-102567-3
—
—
6-102692-5
—
5-534978-2
6-534257-4
6-102692-6
6-102567-1
5-534978-3
5-534257-6
5-102692-2
5-102567-2
5-534978-4
5-534257-7
6-102692-7
6-102567-3
5-534978-5
5-534257-8
5-102692-3
5-102567-3
5-534978-6
5-534257-9
6-102692-3
6-102567-2
5-534978-7
6-534257-0
5-102692-4
5-102567-6
5-534978-8
6-534257-5
5-102692-5
5-102567-4
5-534978-9
6-534257-1
6-102692-4
6-102567-0
6-534978-5
6-534257-2
6-102692-8
6-102567-6
6-534978-0
—
5-102692-6
5-102567-8
6-534978-1
5-534257-1
6-102692-9
6-102567-7
—
—
6-102692-2
6-102567-4
—
—
5-102692-7
5-102567-5
6-534978-7
—
5-102692-8
5-102567-9
6-534978-8
5-534257-2
6-102692-0
6-102567-5
6-534978-2
—
5-102692-9
5-102567-7
6-534978-3
5-534257-3
7-102692-0
6-102567-9
6-534978-9
—
6-102692-1
7-102567-1
5-534978-1
6-534257-9
Note: Headers with make first/break last posts can be made available, consult Tyco Electronics.
Note: All part numbers are RoHS compliant.
198
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Headers, Straight Post, Double-Row, .100 x .100 [2.54 x 2.54]
Centerline (Continued)
See chart
below
.025 [0.64] Square
ACTION PIN Tails
Dimensions
A
12
14
20
24
36
40
50
60
70
80
90
96
100
120
130
.980 [24.89]
1.080 [27.43]
1.380 [35.05]
1.580 [40.13]
2.180 [55.37]
2.380 [60.45]
2.880 [73.15]
3.380 [85.85]
3.880 [98.55]
4.380 [111.25]
4.880 [123.95]
5.180[131.57]
5.380 [136.65]
6.380 [162.05]
6.880 [174.75]
B
.500 [12.70]
.600 [15.24]
.900 [22.86]
1.100 [27.94]
1.700 [43.18]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
3.400 [86.36]
3.900 [99.06]
4.400 [111.76]
4.700 [119.38]
4.900 [124.46]
5.900 [149.86]
6.400 [162.56]
Header Part Nos. with ACTION PIN Posts
.250 [6.35] Tail Length .480 [12.19] Tail Length
.680 [17.27] Tail Length
Plating A
Plating B
Plating A
Plating C
Plating C
5-102690-1 5-103291-4
—
—
—
—
5-103291-3
—
—
—
6-102690-3 5-103291-6
—
—
—
5-102690-2 5-103291-7
—
—
—
5-102690-3 5-103291-9
—
—
—
6-102690-6 5-103291-2
—
—
—
5-102690-4 6-103291-0
—
—
—
5-102690-5 6-103291-1
—
—
—
6-102690-7 6-103291-2
—
—
—
5-102690-6 6-103291-4
—
—
—
6-102690-1 6-103291-6
—
—
—
5-102690-7 6-103291-8
—
—
—
5-102690-8 6-103291-9
—
—
102777-3
5-102690-9 7-103291-1 5-102691-9 1-102666-1
102777-1
—
—
—
102666-9
—
Printed Circuit Board
Connectors
No. of
Pos.
Notes: 1. Other header sizes can be made available upon request.
Headers with ACTION PIN posts are for use with .093 [2.36] nominal or thicker PC boards.
2. Application tooling for installing headers with ACTION PIN posts is shown on pages 152 and 153.
3. Headers with .250 [6.35] tail length can be made available with make first/break last contacts,
consult Tyco Electronics.
4. Plated through holes to be prepared per recommendations found on page 151.
5
Note: All part numbers are RoHS compliant.
199
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Headers, Right-Angle Post, Double-Row, .100 x .100 [2.54 x 2.54]
Centerline
Card Extender
(with Pin Protection
and Guide Pins)
.762
Max.
[19.35]
.599
[15.21]
.040
[1.02]
Typ.
.100
[2.54]
Material and Finish
Printed Circuit Board
Connectors
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
.320
[8.13]
.320
[8.13]
.065
R
[1.65]
(2 Plc.)
Board Retention Tails
(where indicated)
Pos.
Ref.
B
.125
[3.18]
.157
[3.99]
.100
[2.54]
.185
[4.70]
Typ.
.040±.003
[1.02±0.08] .100±.003
(Finished [2.54±0.08]
Hole
w/Bd. Ret.)
.157
[3.99]
.035±.003
Dia. Typ.
[0.89±0.08]
(Standard
Finished Hole)
Mateable Receptacles —
pages 195, 196
Performance Specifications —
page 194
.100
[2.54]
(Localized
Gold Plate
Area)
2 3 4
.200
[5.08]
Typ.
Related Product Data
5
A
.100±.003
[2.54±0.08]
.125
[3.18]
.025 [0.64] Square
Board Retention Tails
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Tolerances not to accumulate within one
connector pattern.
Technical Documents — page 276
Product Specification
108-25017
Application Specification
114-9009
Header Part Nos. with .125 [3.18] Tail Length
Standard Solder Tails
Board Retention Tails
Plating A
Plating B
Plating A
12
.980 [24.89]
.500 [12.70]
6-102802-2
5-102589-8
5-534245-5
16
1.180 [29.97]
.700 [17.78]
6-102802-4
—
5-534245-4
20
1.380 [35.05]
.900 [22.86]
6-102802-5
6-102589-2
5-534245-6
24
1.580 [40.13]
1.100 [27.94]
6-102802-3
5-102589-6
5-534245-7
30
1.880 [47.75]
1.400 [35.56]
6-102802-6
5-102589-4
5-534245-2
36
2.180 [55.37]
1.700 [43.18]
5-102802-3
5-102589-2
5-534245-8
40
2.380 [60.45]
1.900 [48.26]
5-102802-8
6-102589-3
—
50
2.880 [73.15]
2.400 [60.96]
5-102802-4
5-102589-5
5-534245-1
60
3.380 [85.85]
2.900 [73.66]
5-102802-9
5-102589-7
—
72
3.980 [101.09]
3.500 [88.90]
6-102802-7
6-102589-7
—
80
4.380 [111.25]
3.900 [99.06]
5-102802-5
5-102589-1
6-534245-0
90
4.880 [123.95]
4.400 [111.76]
6-102802-0
6-102589-4
—
100
5.380 [136.65]
4.900 [124.46]
5-102802-6
5-102589-3
6-534245-1
120
6.380 [162.05]
5.900 [149.86]
5-102802-2
6-102589-1
5-534245-3
130
6.880 [174.75]
6.400 [162.56]
6-102802-9
6-102589-9
6-534245-3
Note: Headers with make first/break last posts can be made available, consult Tyco Electronics.
No. of
Pos.
Additional header sizes are
available; minimum order
quantities may apply. Consult
Tyco Electronics.
Dimensions
A
B
Note: All part numbers are RoHS compliant.
200
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Headers, Straight Post, Triple-Row, .100 x .100 [2.54 x 2.54] Centerline
Solder Posts
(with Pin Protection
and Guide Pins)
Pos.
Ref.
1 2
.065
R
[1.65]
(2 Plc.)
3
.100
[2.54]
.615
[15.62]
.100
[2.54]
.200
[5.08]
.085
[2.16]
.040
[1.02]
(4 Sides)
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
B
A
.200
[5.08]
(Localized
Gold Plate
Area)
.210
[5.33]
.090
[2.29]
.440
[11.18]
.320
[8.13]
.180
[4.57]
Board Retention Tails
(where indicated)
Mateable Receptacles — page 197
Performance Specifications —
page 194
.040±.003
[1.66±0.08]
(Finished Hole)
.0453±.001
[1.151±0.03]
(Drilled Hole)
.200
[5.08]
Printed Circuit Board
Connectors
Related Product Data
.180
[4.57]
Technical Documents — page 276
Product Specification
108-25017
.100±.003
[2.54±0.08]
Application Specification
114-9009
.100
[2.54]
.025 [0.64] Square
Board Retention Tails
5
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Additional header assembly sizes
are available; minimum order
quantities may apply. Consult
Tyco Electronics.
Tolerances not to accumulate within one
connector pattern.
Dimensions
No. of
Pos.
A
B
72
96
150
210
2.780 [70.61]
3.480 [88.39]
5.380 [136.65]
7.380 [187.45]
2.300 [58.42]
3.000 [76.20]
4.900 [124.46]
6.900 [175.26]
Header Part Nos.
with .180 [4.57] Tail Length
Standard
Board
Solder Tails
Retention Tails
Plating A
Plating A
5-103264-1
5-534258-1
—
5-534258-3
5-103264-3
—
5-103264-4
—
Note: All part numbers are RoHS compliant.
201
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Headers, VRM (Voltage Regulator Module),
.100 x .100 [2.54 x 2.54] Centerline
Solder Posts and
ACTION PIN Posts (with
Pin Protection, Guide
Ribs, and Latching)
A
B
.515
[13.08]
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Posts — Copper alloy, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
.110
[2.79]
.120
[3.05]
.320
[8.13]
.440
[11.18]
Related Product Data
Printed Circuit Board
Connectors
Mateable Receptacles —
pages 195, 196
Performance Specifications —
page 194
ACTION PIN Posts —
page 150, 151
Application Tooling —
pages 152
Housing Outline
B
.100
[2.54]
.125
[3.18]
.290
[7.37]
.040 +.003
[1.02 +.08]
.100
[2.54]
.525
[13.33]
Technical Documents — page 276
Product Specification
108-25017
Application Specification
114-9009
5
Recommended PC Board Hole Layout
No
of
Pos
30
40
Header Part No.
Dimensions
A
B
Standard Solder Tails
.250 Length ACTION PIN Tails
2.450 [62.23]
3.095 [78.62]
3.100 [78.74]
1.400 [35.56]
1.900 [48.26]
1.900 [48.26]
5-146205-1
—
5-146315-1
—
5-147254-1
—
Note: All part numbers are RoHS compliant.
202
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Accessories: End Shrouds for Machine-Applied Posts
Single-Row, .100 [2.54] Centers
Part No. 102338-1
Mating Polarized
Housing
Material — Black thermoplastic, flame
retardant
.066
[1.68]
.164
[4.17]
.290
[7.37]
End
Shroud
.712
[18.08]
Board Mounted
Straight Posts
.050
[1.27]
.059
[1.50] .350
Max. [8.89]
PC Board
Typical Assembly
Break Line for 7 Pos.
or Larger Header
.066
[1.68]
.029
[0.74]
Dia.
Printed Circuit Board
Connectors
Technical Documents — page 276
Double-Row, .100 x .100 [2.54 x 2.54] Centers
Part No. 102114-1
5
Material — Black glass-filled
polyester
.405
[10.29]
.280
[7.11]
.050
[1.27]
.150
[3.81]
.890
[22.61]
.059
[1.50]
Max.
Break Line for 14 Pos.
or Larger Header
.066
[1.68]
.350
[8.89]
.029
[0.74]
Dia.
Note: All part numbers are RoHS compliant.
203
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Accessories: Barrier Insert, Part No. 87743-1
Material
.340
[8.64]
.446
[11.33]
.037
[0.94]
Black polyester
Technical Documents — page 276
The barrier insert can be
used on double row headers
(.100 x .100 [2.54 x 2.54]
centers), including shrouded
versions—3 and 4 sides,
as well as unshrouded
straight post headers. With
one barrier insert several
configurations can be
obtained, providing headers
with capabilities of accepting various combinations of
polarized and non-polarized
AMPMODU connectors.
Printed Circuit Board
Connectors
For unshrouded headers,
the barrier insert is used
to establish polarization
and to compartmentalize
the header. For shrouded
headers, the barrier insert is
used to compartmentalize
the header, while maintaining
polarization. The barrier
insert itself is notched to
facilitate cutting off the
ends with a simple tool
such as tin snips or scissors
to achieve the desired
configuration.
5
.030
[0.76]
.090
[2.29]
.314
[7.98]
.031-.043
[0.79-1.09]
Dia. x .250[
[6.35]
.030
[0.76]
.127
[3.23]
Deep—
remainder
.029±.001
[0.74±0.03]
Dia.
Thru Typ. (2)
.100
[2.54]
.087
[2.21]
45°
.094
[2.39]
.047
[1.19]
Barrier Insert Cutoffs
Fig. 1
Partial Cutoff
(Left and Right Sides)
Fig. 2
Partial Cutoff
(Left Side)
Complete Cutoff
(Right Side)
Fig. 3
Complete Cutoff
(Left Side)
Partial Cutoff
(Right Side)
Fig. 4
Complete Cutoff
(Left and Right Sides)
Typical Barrier Insert Applications
For Unshrouded Double-Row, Straight Post Headers,
.100 x .100 [2.54 x 2.54] Centers
See Fig. 3
See Fig. 4
See Fig. 1
See Fig. 2
Note: All configurations of barrier inserts compartmentalize headers and maintain polarization,
except bar (Fig. 4) configuration, which is used primarily for compartmentalizing headers.
For Shrouded Double-Row, 3 and 4 Sided Headers,
.100 x .100 [2.54 x 2.54] Centers
See Fig. 2
See Fig. 4
See Fig. 1
See Fig. 3
Note: Right-angle (Figs. 2 and 3) and “T” (Fig. 1) configurations of barrier insert establish
polarization; bar (Fig. 4) configuration of barrier insert compartmentalizes header.
Note: All part numbers are RoHS compliant.
204
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Accessories: Snap-In Polarizer for Low Profile Headers
Material
Black thermoplastic, flame retardant
.134
[3.40]
Part Numbers
.335
[8.51]
499991-2 (Packaged 50 per bag)
499991-3 (Packaged 1000 per bag)
Break Line
(See below.)
Related Product Data
Low Profile Headers used with —
pages 135-140
.335
[8.51]
Break Line
(See below.)
.134
[3.40]
The snap-in polarizer provides military polarization for low
profile headers. Installation of the polarizer is as follows:
Printed Circuit Board
Connectors
Orient the polarizer so that the
polarizer latch is on the same side
as the inner wall (post side) of the
header housing.
Slide the polarizer over the
polarizing slot of the housing until
the latch engages the hole. Snap
off the tab at the break line next to
the housing. Using the remaining
polarizer, repeat the process for the
other housing location.
5
Break Line
Note: For Post Shunts, contact Tyco Electronics.
Note: All part numbers are RoHS compliant.
205
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Locking Clip Contacts and Housings
Locking Clip
Contacts and Housings
Product Facts
■
Self-retaining contacts
provide permanent
connection with quick
connect and disconnect
■
Fast, easy installation with
no additional locking
hardware required
■
Mates with .025 [0.64]
square posts in a variety
of configurations
■
Single- and double-row
configurations in up to
20 positions on .100 [2.54]
centers
■
Modular design permits
end-to-end stacking
(double- row only) for
circuit grouping
■
Choice of tin or select gold
plating
■
Housings made of 94V-0
rated glass-filled polyester
■
Recognized under the
Component Program
of Underwriters
Laboratories Inc.,
File No. E28476
R
■
5
Typical Application
Certified by Canadian
Standards
Association,
File No. LR 7189
Single
Contact
(Page 207)
R
Performance
Characteristics
Contact Current Rating —
3 amperes
Termination Resistance —
12 milliohms (max.) — Gold plated
contacts
16 milliohms (max.) — Tin plated
contacts
Durability — Ref. Product
Specification 108-36028 and
108-36028-1
Both Ends
Closed
(for specified
no. of circuits—
housing size)
(Page 209)
Single Row
Both Ends
Closed
(Page 208)
Left End
Open (for
stacking to
left side)
(Page 209)
Right End
Open (for
stacking to
right side)
(Page 209)
PC Board
.100 x .100
[2.54 x 2.54]
.200/.277*
[5.08/7.04]
(without
housing
Extraction
Tool Slot
Contact
Clearance
Hole
.025
[0.64]
Sq. Posts
.273/.350*
[6.93/8.89]
(with housing)
*If post is longer than maximum specified, post tip may butt against wire ends.
Dimension defines .025 x .025 [0.64 x 0.64] portion of post.
206
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Locking Clip Contacts
Wire Crimp Contacts
with Insulation Support
Body
Material and Finish
Contact Spring — Stainless steel
Pating A — Selectively plated
.000050 [0.00127] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Pating B — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Pating C — .000100-.000200
[0.00254-0.00508] bright tin over
.000050 [0.00127] nickel on entire
contact
Wire Size
Range
AWG
[mm2]
Spring
A
Ins.
Dia.
Range
Dimension
A
0.05-0.09
.029-.039 [0.74-0.99]
.550 [13.97]
26-22
0.12-0.4
.038-.062 [0.97-1.57]
.584 [14.83]
20
0.5-0.6
.038-.062 [0.97-1.57]
.584 [14.83]
Plating B
Plating C
Plating A
Plating B
Plating C
Plating B
Plating C
Part Nos.
Strip Form
Loose Piece
87190-1
5-87190-2
87124-3
87124-1
5-87124-2
867052-2
5-867052-1
87191-1
5-87191-2
87165-3
87165-1
5-87165-2
—
—
Heavy Duty Miniature
Applicator for
AMP-O-LECTRIC
Machine*
Hand
Tool
No.
567310-2
90295-1
466721-2
91533-1
679996-2
90431-1
Locking Clip
Contacts and Housings
30-28
Finish
*For use with AMP-O-LECTRIC Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Notes: 1. These contacts must be crimped in accordance with Tyco Electronics Specification No. 114-25006 in order to function properly in a connector housing.
2. Extraction Tool No. 91084-1 is used for removing individual contacts from connector housings and for detaching contacts from mating posts.
5
Related Product Data
Housings Used With —
pages 208, 209
Application Tooling — page 272
Technical Documents —
pages 277, 278
Product Specification
108-36028, 108-36028-1
Application Specification
114-25006
Wire Harnessing
If necessary, wires can be
grouped with cable ties and
secured to a panel with
fixed clamps. However,
locking clip contacts must
be free to float within the
connector housings to
allow proper extraction.
Therefore, harnessing
hardware or the use of
multiple terminations per
contact must not restrict
the free-floating action of
contacts in the housing.
Fixed
Clamp
Unrestricted
Wires for
Free-Floating
Contacts
Cable
Tie
For more information
request Insulation and
Bundling Products Catalog
124132.
Extraction Tool
No. 91084-1
Note: All part numbers are RoHS compliant.
207
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Wire-Applied Housings for Locking Clip Contacts,
Single-Row, .100 [2.54] Centerline
Single-Row
.060
[1.52]
.700
[17.78]
.350
.273 (Post
8.89 Length)
6.93
[ ]
Material
Glass-filled polyester, 94V-0 rated
.145
[3.68]
Related Product Data
A
Contacts — page 207
Mateable Headers and Posts —
Refer to the Mating Post Selection
Guide — page 90
.085
[2.16]
.175
[4.44]
C
Typ.
.100
Typ.
[2.54]
Technical Documents —
pages 277, 278
Locking Clip
Contacts and Housings
.025 [0.64]
Sq. Post
(Shown for
Ref. only)
B
Product Specification
108-36028, 108-36028-1
Application Specification
114-25006
Note: Housing illustrated above is the “Both Ends Closed” version.
.125 [3.18] centerline single-row,
2 and 3 position housings are
available, Base Part No. 104905.
They are designed to be stackable
end-to-end and side-by-side.
Consult Tyco Electronics.
5
No. of
Pos.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Keying Plug
A
.108 [2.74]
.216 [5.49]
.316 [8.03]
.416 [10.57]
.516 [13.11]
.616 [15.65]
.716 [18.19]
.816 [20.73]
.916 [23.27]
1.016 [25.81]
1.116 [28.35]
1.216 [30.89]
1.316 [33.43]
1.416 [35.97]
1.516 [38.51]
Dimensions
B
—
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
C
.054 [1.37]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
Housing Part No.
Unstamped
Stamped
87175-2
—
87175-6
—
87175-8
—
1-87175-0
—
1-87175-2
—
1-87175-4
1-87175-3
1-87175-6
1-87175-5
1-87175-8
1-87175-7
2-87175-0
1-87175-9
2-87175-2
2-87175-1
2-87175-4
2-87175-3
2-87175-6
2-87175-5
2-87175-8
2-87175-7
3-87175-0
2-87175-9
87175-4
87175-3
Part No. 87179-1
(Plugs directly into housings for
.025 [0.64] square post contacts)
Material — Yellow, nylon
Note: All part numbers are RoHS compliant.
208
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Wire-Applied Housings for Locking Clip Contacts,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
Double-Row
.300
[7.62]
.700
[17.78]
.350 Max.
[8.89]
(Post Length)
Material
Glass-filled polyester, 94V-0 rated
.270
[6.86]
Related Product Data
.025 [0.64]
Sq. Post
(Shown for
Ref. only)
A
.100
Typ.
[2.54]
.100
[2.54]
Contacts — page 207
Mateable Headers and Posts —
Refer to the Mating Post Selection
Guide — page 90
.058
[1.47]
Technical Documents —
B
Locking Clip
Contacts and Housings
pages 277, 278
Note: Housing illustrated above is the “Both Ends Closed” version.
Product Specification
108-36028, 108-36028-1
Application Specification
114-25006
Both Ends Closed
5
Key
Right End Open
Housing
Configuration
Keying Plug
Both Ends Closed
Right End Open
Part No. 87179-1
(Plugs directly into housings for
.025 [0.64] square post contacts)
Material — Yellow, nylon
Left End Open
No. of
Pos.
2
4
6
8
10
12
16
18
20
4
10
20
4
10
20
Keyway
Dimensions
A
B
.116 [2.95]
—
.216 [5.49]
.100 [2.54]
.316 [8.03]
.200 [5.08]
.416 [10.57]
.300 [7.62]
.516 [13.11]
.400 [10.16]
.616 [15.65]
.500 [12.70]
.816 [20.73]
.700 [17.78]
.916 [23.27]
.800 [20.32]
1.016 [25.81]
.900 [22.86]
.216 [5.49]
.100 [2.54]
.516 [13.11]
.400 [10.16]
1.016 [25.81]
.900 [22.86]
.216 [5.49]
.100 [2.54]
.516 [13.11]
.400 [10.16]
1.016 [25.81]
.900 [22.86]
Left End Open
Housing Part No.
Unstamped
Stamped
87176-2
—
87133-1
—
87133-7
87133-8
87133-9
1-87133-0
87133-2
87133-5
1-87133-1
1-87133-2
1-87133-3
1-87133-4
1-87133-5
1-87133-6
87133-3
87133-6
87132-1
—
87132-2
87132-5
87132-3
87132-6
87131-1
—
87131-2
87131-5
87131-3
87131-6
Note: All part numbers are RoHS compliant.
209
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod IV Wire-Applied Contacts and Housings
Mod IV Wire-Applied
Contacts and Housings
Product Facts
■
Terminates 32-20 AWG
[0.03-0.6mm2] discrete wire
■
Contacts have insulation
support
■
Choice of three contact
mating pressures
■
Available in a variety of
gold and tin platings
■
Receptacles mate with .025
[0.64] square or round posts
■
Dual cantilever contact
beam with built-in
anti-overstress feature
for reliable matings
■
Housings accept a variety of
receptacle and pin contacts
■
Housing sizes range up to
100 positions
■
Housing configurations
include single- and doublerows on .100 [2.54]
centerlines
■
Housing options include
detent latching, polarization
and bonded strain relief/
pull tabs
■
5
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
1-87631-5 D-R Housing, Polarized with Detent
6-87756-6 Std. Pressure Contacts
Wire-to-Board
1-87456-5 D-R Housing, Plain
6-87756-6 Std. Pressure Contacts
102387-1 D-R Ejection Housing,
Center Polarized
6-87756-6 Std. Pressure Contacts
87483-3 D-R Housing with Mounting Ears
6-87756-6 Std. Pressure Contacts
R
■
Certified by Canadian
Standards
Association,
File No. LR 7189
102241-8 S-R Housing Polarized with
Detent
102128-1 High Pressure Contacts
1825851-1 Latch
5102154-1 Hdr
R
5-103166-8 Hdr
103168-8
Hdr
1-87756-6 Std. Pressure Plain
6-87456-6 D-R Housing, Contacts
3-87977-5 D-R Housing, Polarized
6-87756-6 Std. Pressure Contacts
1-87232-0
Hdr
5-103166-8 Hdr
Performance
Characteristics
1-87499-8 S-R Housing, Plain
102128-1 High Pressure Contacts
5-102202-7 Hdr
Contact Current Rating —
3 amperes
Termination Resistance —
12 milliohms (max.) — Beryllium
copper contacts
20 milliohms (max.) — Copper-tinphosphor bronze contacts
Durability — Ref. Product
Specification 108-25020
Note: All part numbers are RoHS compliant.
210
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod IV Pin and Receptacle Contacts
Crimp Snap-In (No-strip)
Receptacles and Crimp
Snap-In Pins with
Insulation Support
(Standard Pressure)
.058
[1.47]
No-Strip
Receptacle
.470
[11.94]
.165
[4.19]
.016
[0.41]
Gap Max.
Pin with
Insulation Support
.815
[20.70]
.068
[1.73]
Crimp Snap-In (No-strip) Receptacles
Ins.
Dia.
Range
Finish
.040-.055 [1.02-1.40]
Plating A
Plating C
Part Nos.
Strip Form
Loose Piece
87107-5
87107-6
102348-2
102348-3
Heavy Duty Miniature
Applicator No.
for AMP-O-LECTRIC
Machine*
Hand
Tool
Part No.
567307-2
90381-1
Standard Pressure
Configuration
Material and Finish
Crimp Snap-In Pins with Insulation Support
Wire
Size
Range
AWG
[mm2]
Ins.
Dia.
(Max.)
Finish
26-22
.061
[1.55]
Plating A
Plating B
Plating C
0.12-0.4
Mod IV Contacts
Beryllium copper, phosphor bronze, or
copper-tin-phosphor bronze (see
charts), plated as follows:
Plating A — Selectively plated .000030
[0.00076] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating B — Selectively plated .000015
[0.00038] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000030
[0.00076] nickel on entire
contact
Hand
Heavy Duty Miniature
Tool
Applicator No.
Part
No.
Loose Piece for AMP-O-LECTRIC
Machine*
Premium Commercial
102107-2
102107-1
466812-2
91517-1
58641-1†
5-102107-3
Part Nos.
Strip Form
102095-3
102095-2
5-102095-4
*For use with AMP-O-LECTRIC Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos.
of applicators for use with the AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench
machines and fully automatic AMPOMATOR lead making machines.
†PRO-CRIMPER II hand tool frame with die set assembly.
Die Set Part No. 58641-2
5
Related Product Data
Housings Used With —
pages 214-220
Performance Characteristics —
page 210
Application Tooling —
page 270-272
Technical Documents —
pages 276-278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
Additional header sizes are
available; minimum order
quantities may apply.
Consult Tyco Electronics.
Note: All part numbers are RoHS compliant.
211
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod IV Receptacle Contacts
Crimp Snap-In Receptacles
with Insulation Support
(Standard, Intermediate
and High Pressure)
Standard Pressure
A
.058
[1.47]
Material and Finish
Mod IV Contacts
Beryllium copper, phosphor bronze or
copper-tin-phosphor bronze (see charts,
on following page), plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100.000200 [0.00254-0.00508] tin on crimp
area, with entire contact underplated
.000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100.000200 [0.00254-0.00508] tin on crimp
area, with entire contact underplated
.000050 [0.00127] nickel
Plating D — Selectively plated .000050
[0.00127] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating E — Selectively plated .000030
[0.00076] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating F — Selectively plated .000015
[0.00038] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating G — .000100-.000200
[0.00254-0.00508] tin over .000030
[0.00076] nickel on entire contact
5
.165
[4.19]
A
.068
[1.73]
Intermediate Pressure
A
High Pressure
A
Related Product Data
Housings Used With —
pages 214-220
Performance Characteristics —
page 210
Application Tooling —
pages 270-272
Technical Documents —
pages 277, 278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
Standard Pressure
Intermediate Pressure
High Pressure
Mating Force
9 oz. Max.
16 oz. Max.
20 oz. Max.
Unmating Force
1.5 oz. Min.
2 oz. Min.
3 oz. Min.
A-Gap Dimension
.008/.014
.008/.014
.013±.002
212
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod IV Receptacle Contacts (Continued)
Standard Pressure (Mod IV)
Wire
Size
Range
AWG [mm2]
Ins.
Dia.
(Max.)
Dimension
A
32-27 0.03-0.1
.040 [1.02]
.445 [11.30]
26-22 0.12-0.4
.061 [1.55]
.445 [11.30]
24-20 0.2-0.6
.069 [1.75]
.470 [11.94]
Material
Cu-Sn-Ph Bz
Cu-Sn-Ph Bz
Be Cu
Be Cu
Be Cu
Cu-Sn-Ph Bz
Cu-Sn-Ph Bz
Cu-Sn-Ph Bz
Cu-Sn-Ph Br
Be Cu
Be Cu
Be Cu
Be Cu
Cu-Sn-Ph Bz
Cu-Sn-Ph Bz
Be Cu
Be Cu
Cu-Sn-Ph Br
Be Cu
Finish
Hand
Tool
Part Nos.
Premium Commercial
Plating A 5-102316-8
Plating B 5-102316-6
Plating D 1-102917-1
Plating E
102917-1
Plating F
102917-5
Plating G
102316-5
Plating A
6-87756-7
Plating B
6-87756-2
Plating G
87756-6
Plating D 1-87666-6
Plating E
87666-2
Plating F
87666-5
Plating G
87666-3
Plating A
6-87523-8
Plating B
2-87523-3
Plating E
85969-8
Plating F
85969-6
Plating G
87523-5
Plating G
85969-9
Heavy Duty Miniature Applicator for
Applicator for
Stripper/
AMP-O-LECTRIC
Crimper
Machine*
Machine
Hand
Tool
Part Nos.
Premium Commercial
91541-1
—
91517-1
58641-1†
91516-1
—
Mod IV Contacts
Heavy Duty Miniature Applicator for
Applicator for
Stripper/
AMP-O-LECTRIC
Crimper
Machine*
Machine
6-102316-4
6-102316-3
1-102917-2
466655-2
466921-1
102917-2
102917-6
1-102316-2
6-87756-8
6-87756-6
87756-7
87667-5
466571-2
466918-1
87667-2
87667-5
87667-3
6-87523-9
2-87523-4
86016-2
466562-2
466905-1
86016-5
87523-6
86016-3
Part Nos.
Strip Form Loose Piece
Intermediate Pressure (Mod IV.v)
Wire
Size
Range
AWG [mm2]
Ins.
Dia.
(Max.)
Dimension
A
32-27 0.03-0.1
.040 [1.02]
.445 [11.30]
26-22 0.12-0.4
.061 [1.55]
.445 [11.30]
24-20 0.2-0.6
.069 [1.75]
.470 [11.94]
Material
Cu-Sn-Ph Bz
Be Cu
Cu-Sn-Ph Bz
Cu-Sn-Ph Bz
Be Cu
Be Cu
Cu-Sn-Ph Bz
Cu-Sn-Ph Bz
Be Cu
Be Cu
Be Cu
Finish
Part Nos.
Strip Form Loose Piece
Plating A 5-102920-1 5-102920-2
Plating E
102918-1
102918-2
Plating A 5-103171-4 5-103171-5
Plating B 5-103171-1 5-103171-2
Plating E
102548-5
102548-6
Plating F
102548-1
102548-3
Plating A 2-87195-3 2-87195-6
Plating B 2-87195-4 2-87195-5
Plating E
86492-6
87046-3
Plating F
86492-2
87046-1
Plating G
86492-9
87046-4
466655-2
466921-1
91541-1
—
466571-2
466918-1
91517-1
58641-1†
466562-2
466905-1
91516-1
—
5
High Pressure (Mod V)**
Wire
Size
Range
AWG
[mm2]
32-27 0.03-0.1
Ins.
Dia.
(Max.)
Dimension
A
Material
Finish
.040 [1.02]
.445 [11.30]
26-22 0.12-0.4
.061 [1.55]
.445 [11.30]
24-20
.069 [1.75]
.470 [11.94]
Ph Bz
Ph Bz
Ph Bz
Ph Bz
Ph Bz
Plating E
Plating E
Plating G
Plating E
Plating G
0.2-0.6
Part Nos.
Strip Form Loose Piece
103455-1
103455-2
87809-1
102128-1
87809-2
102128-2
87309-9
1-87309-4
87309-8
1-87309-3
Heavy Duty Miniature
Applicator for
AMP-O-LECTRIC
Machine*
466655-2
Applicator for
AMP-O-MATIC
Stripper/Crimper
Machine
466921-1
Hand
Tool
Part Nos.
466571-2
466918-1
91517-1
466562-2
466905-1
91516-1
91541-1
**For use with AMP-O-LECTRIC Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
**Contact material is phosphor bronze.
†PRO-CRIMPER II hand tool frame with die set assembly.
Die Set Part No. 58641-2
Note: All part numbers are RoHS compliant.
213
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod IV Wire-Applied Housings, Single-Row, .100 [2.54] Centerline
Non-Polarized
.600
[15.24]
Material
Black thermoplastic, flame retardant
.050
[1.27]
Typ.
Related Product Data
Contacts — pages 211-213
Mateable Headers and Posts —
pages 93-95, 101-103
.175
[4.45]
A
Max.
.070
[1.78]
Typ.
B ±.003
[±0.08]
.100
Typ.
[2.54]
C ±.003
[±0.08]
.072
[1.83]
.140
[3.56]
X
X
Section X-X
Technical Documents —
pages 277, 278
Mod IV Wire-Applied Housings
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
5
Keying Plugs
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Material — Natural color nylon
Part No. 87077-2
(Plugs directly into housing)
No. of
Pos.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
A
.105 [2.67]
.205 [5.21]
.305 [7.75]
.405 [10.29]
.505 [12.83]
.605 [15.37]
.705 [17.91]
.805 [20.45]
.905 [22.99]
1.005 [25.53]
1.105 [28.01]
1.205 [30.61]
1.305 [33.15]
1.405 [35.69]
1.505 [38.23]
1.605 [40.77]
1.700 [43.18]
1.805 [45.85]
1.900 [48.26]
2.005 [50.93]
2.100 [53.34]
2.205 [56.01]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.605 [66.17]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.005 [76.33]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.500 [88.98]
3.600 [91.44]
Dimensions
B
—
.100 [2.54]
.100 [2.54]
.200 [5.08]
.200 [5.08]
.300 [7.62]
.300 [7.62]
.400 [10.16]
.400 [10.16]
.500 [12.70]
.500 [12.70]
.600 [15.24]
.600 [15.24]
.700 [17.78]
.700 [17.78]
.800 [20.32]
.800 [20.32]
.900 [22.86]
.900 [22.86]
1.000 [25.40]
1.000 [25.40]
1.100 [27.94]
1.100 [27.94]
1.200 [30.48]
1.200 [30.48]
1.300 [33.02]
1.300 [33.02]
1.400 [35.56]
1.400 [35.56]
1.500 [38.10]
1.500 [38.10]
1.600 [40.64]
1.600 [40.64]
1.700 [43.18]
1.700 [43.18]
1.800 [45.72]
Part No.
C
—
—
.100 [2.54]
.100 [2.54]
.200 [5.08]
.200 [5.08]
.300 [7.62]
.300 [7.62]
.400 [10.16]
.400 [10.16]
.500 [12.70]
.500 [12.70]
.600 [15.24]
.600 [15.24]
.700 [17.78]
.700 [17.78]
.800 [20.32]
.800 [20.32]
.900 [22.86]
.900 [22.86]
1.000 [25.40]
1.000 [25.40]
1.100 [27.94]
1.100 [27.94]
1.200 [30.48]
1.200 [30.48]
1.300 [33.02]
1.300 [33.02]
1.400 [35.56]
1.400 [35.56]
1.500 [38.10]
1.500 [38.10]
1.600 [40.64]
1.600 [40.64]
1.700 [43.18]
1.700 [43.18]
Stamped*
—
87499-3
87499-5
87499-7
87499-9
1-87499-1
87499-1
1-87499-3
1-87499-5
1-87499-7
1-87499-9
2-87499-1
2-87499-3
2-87499-5
2-87499-7
2-87499-9
—
—
—
3-87499-7
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Unstamped**
7-87499-2
87499-4
87499-6
87499-8
1-87499-0
1-87499-2
87499-2
1-87499-4
1-87499-6
1-87499-8
2-87499-0
2-87499-2
2-87499-4
2-87499-6
2-87499-8
3-87499-0
3-87499-2
3-87499-4
3-87499-6
3-87499-8
4-87499-0
4-87499-2
4-87499-4
4-87499-6
4-87499-8
5-87499-0
5-87499-2
5-87499-4
5-87499-6
5-87499-8
6-87499-0
6-87499-2
6-87499-4
6-87499-6
6-87499-8
7-87499-0
**Cavity identification, part number and date code stamped on housing where size permits.
**No marking on housing.
Notes: 1. Strain reliefs are available and may be purchased separately. Consult Tyco Electronics.
Notes: 2. Contact Extraction/Lance Reset Tool No. 843996-3.
Note: All part numbers are RoHS compliant.
214
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod IV Wire-Applied Housings, Single-Row, .100 [2.54] Centerline (Continued)
Recessed Area
Polarized (with
Detent Latching)
.175
[4.45]
A
Material
.050 Typ.
[1.27]
Black thermoplastic, flame retardant
B ±.003
[±0.08]
.071
[1.80]
Related Product Data
Contacts — pages 211-213
Mateable Headers and Posts —
pages 115, 116
Flexible Film Connectors,
Single-Row Pin Assemblies —
Catalog 82007
pages 277, 278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
Keying Plugs
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Material — Natural color nylon
.600
[15.24]
X
.072
[1.83]
.182
[4.62]
X
.056
[1.42]
No. of
Pos.
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
.100
[2.54]
Typ.
A
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.500 [88.90]
3.600 [91.44]
.100
[2.54]
Typ.
Dimensions
B
.100 [2.54]
.200 [5.08]
.200 [5.08]
.300 [7.62]
.300 [7.62]
.400 [10.16]
.400 [10.16]
.500 [12.70]
.500 [12.70]
.600 [15.24]
.600 [15.24]
.700 [17.78]
.700 [17.78]
.800 [20.32]
.800 [20.32]
.900 [22.86]
.900 [22.86]
1.000 [25.40]
1.000 [25.40]
1.100 [27.94]
1.100 [27.94]
1.200 [30.48]
1.200 [30.48]
1.300 [33.02]
1.300 [33.02]
1.400 [35.56]
1.400 [35.56]
1.500 [38.10]
1.500 [38.10]
1.600 [40.64]
1.600 [40.64]
1.700 [43.18]
1.700 [43.18]
1.800 [45.72]
.127
[3.23]
C
.100 [2.54]
.100 [2.54]
.200 [5.08]
.200 [5.08]
.300 [7.62]
.300 [7.62]
.400 [10.16]
.400 [10.16]
.500 [12.70]
.500 [12.70]
.600 [15.24]
.600 [15.24]
.700 [17.78]
.700 [17.78]
.800 [20.32]
.800 [20.32]
.900 [22.86]
.900 [22.86]
1.000 [25.40]
1.000 [25.40]
1.100 [27.94]
1.100 [27.94]
1.200 [30.48]
1.200 [30.48]
1.300 [33.02]
1.300 [33.02]
1.400 [35.56]
1.400 [35.56]
1.500 [38.10]
1.500 [38.10]
1.600 [40.64]
1.600 [40.64]
1.700 [43.18]
1.700 [43.18]
Section X-X
Mod IV Wire-Applied Housings
Technical Documents —
C ±.003
[±0.08]
Part Nos.
Unstamped*
102241-1
102241-2
102241-3
102241-4
102241-5
102241-6
102241-7
102241-8
102241-9
1-102241-0
1-102241-1
1-102241-2
1-102241-3
1-102241-4
1-102241-5
1-102241-6
1-102241-7
1-102241-8
1-102241-9
2-102241-0
2-102241-1
2-102241-2
2-102241-3
2-102241-4
2-102241-5
2-102241-6
2-102241-7
2-102241-8
2-102241-9
3-102241-0
3-102241-1
3-102242-2
3-102241-3
3-102241-4
5
*No marking on housing.
Note: Contact Extraction/Lance Reset Tool No. 843996-3.
Part No. 87077-2
(Plugs directly into housing)
Note: All part numbers are RoHS compliant.
215
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod IV Wire-Applied Housings, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
Non-Polarized
.175
[4.45]
A
Material
Black thermoplastic, flame retardant
.100 Typ.
[2.54]
.050
[1.27]
Typ.
.240
[6.10]
B
X
C
.100
[2.54]
R
Optional
Related Product Data
Contacts — pages 211-213
Mateable Headers and Posts —
pages 96-99, 104, 105, 117-120
Mod IV Wire-Applied Housings
.070
[1.78]
No.
of
Pos.
Technical Documents —
pages 277, 278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
5
X
Keying Plugs
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Material — Natural color nylon
Part No. 87077-1
(for .645 high housings)
Part No. 87077-2
(for .600 high housings)
(Plugs directly into housing)
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
48
50
52
54
56
58
60
64
66
70
72
Dimensions
A
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.200 [81.28]
3.300 [83.82]
3.500 [88.90]
3.600 [91.44]
B
—
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.100 [78.74]
3.200 [81.28]
3.400 [86.36]
3.500 [88.90]
Section X-X
Part Nos.
C = .600 [15.24]
Stamped*
Unstamped**
—
5-87456-3
5-87456-0
4-87456-9
87456-2
87456-1
87456-4
87456-3
87456-6
87456-5
87456-8
87456-7
1-87456-0
87456-9
1-87456-2
1-87456-1
1-87456-4
1-87456-3
1-87456-6
1-87456-5
—
1-87456-7
2-87456-0
1-87456-9
2-87456-2
2-87456-1
2-87456-4
2-87456-3
2-87456-6
2-87456-5
2-87456-8
2-87456-7
3-87456-0
2-87456-9
3-87456-2
3-87456-1
—
3-87456-3
3-87456-6
3-87456-5
4-87456-4
4-87456-3
3-87456-8
3-87456-7
6-87456-0
5-87456-9
4-87456-0
3-87456-9
4-87456-2
4-87456-1
—
4-87456-5
—
6-87456-1
—
6-87456-3
5-87456-2
5-87456-1
6-87456-6
6-87456-5
5-87456-4
5-87456-7
—
5-87456-5
4-87456-8
4-87456-7
.072
[1.83]
C = .645 [16.38]
Unstamped**
—
2-86177-5
1-86177-8
2-86177-0
1-86177-2
1-86177-3
1-86177-4
1-86177-5
1-86177-6
86177-1
86177-2
86177-3
86177-4
86177-5
86177-6
86177-7
86177-8
86177-9
1-86177-0
1-86177-1
—
1-86177-7
2-86177-3
2-86177-1
1-86177-9
—
—
—
—
—
—
2-86177-4
—
**Cavity identification, part number and date code stamped on housing where size permits.
**No marking on housing.
Notes: 1. Strain reliefs are available and may be purchased separately. Consult Tyco Electronics.
Notes: 2. Contact Extraction/Lance Reset Tool No. 843996-3.
Note: All part numbers are RoHS compliant.
216
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod IV Wire-Applied Housings, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Strain Relief Locators
(on Housings 20 Positions
and Larger)
Polarized
.175
[4.45]
Material
Black thermoplastic, flame retardant
A
±.003
B [±0.08]
Related Product Data
.100
[2.54]
Typ.
Contacts — pages 211-213
Mateable Headers and Posts—
pages 117-131
C ±.003
[±0.08]
.100
[2.54]
X
Typ.
.050
[1.27]
Typ.
.600
[15.24]
.070 Typ.
[1.78]
R
Optional
.240
[6.10]
Technical Documents —
Section X-X
X
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
Keying Plugs
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Material — Natural color nylon
Part No. 87077-2
(Plugs directly into housing)
No. of
Pos.
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
48
50
52
54
56
58
60
64
66
70
72
A
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.200 [81.28]
3.300 [83.82]
3.500 [88.90]
3.600 [91.44]
Dimensions
B
.100 [2.54]
.200 [5.08]
.200 [5.08]
.300 [7.62]
.300 [7.62]
.400 [10.16]
.400 [10.16]
.500 [12.70]
.500 [12.70]
.600 [15.24]
.600 [15.24]
.700 [17.78]
.700 [17.78]
.800 [20.32]
.800 [20.32]
.900 [22.86]
.900 [22.86]
1.000 [25.40]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.200 [30.48]
1.300 [33.02]
1.300 [33.02]
1.400 [35.56]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
C
.100 [2.54]
.100 [2.54]
.200 [5.08]
.200 [5.08]
.300 [7.62]
.300 [7.62]
.400 [10.16]
.400 [10.16]
.500 [12.70]
.500 [12.70]
.600 [15.24]
.600 [15.24]
.700 [17.78]
.700 [17.78]
.800 [20.32]
.800 [20.32]
.900 [22.86]
.900 [22.86]
1.000 [25.40]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.200 [30.48]
1.300 [33.02]
1.300 [33.02]
1.400 [35.56]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.700 [43.18]
Mod IV Wire-Applied Housings
.100
[2.54]
pages 277, 278
Stamped*
87977-1
87977-2
87977-3
87977-4
87977-5
87977-6
—
87977-8
—
1-87977-0
1-87977-1
—
—
—
—
—
—
1-87977-8
—
—
—
2-87977-1
—
—
—
—
2-87977-4
—
—
—
—
Part Nos.
Unstamped**
2-87977-8
2-87977-9
3-87977-0
3-87977-1
3-87977-2
3-87977-3
3-87977-4
3-87977-5
3-87977-6
3-87977-7
3-87977-8
3-87977-9
4-87977-0
4-87977-1
4-87977-2
4-87977-3
4-87977-4
4-87977-5
4-87977-6
4-87977-7
5-87977-6
4-87977-8
4-87977-9
5-87977-0
5-87977-8
6-87977-0
5-87977-1
6-87977-2
5-87977-2
5-87977-3
5-87977-4
5
**Cavity identification, part number and date code stamped on housing where size permits.
**No marking on housing or strain relief.
Notes: 1. Strain reliefs are available and may be purchased separately. Consult Tyco Electronics.
Notes: 2. Contact Extraction/Lance Reset Tool No. 843996-3.
Note: All part numbers are RoHS compliant.
217
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod IV Wire-Applied Housings, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Polarized (with Detent
Latching, with and without
Strain Relief/Pull Tab)
Strain Relief Locators
(on Housings 20 Positions
and Larger)
.175
[4.45]
A
Material
B ±.003
C ±.003
[±0.08]
Black thermoplastic, flame retardant
[±0.08]
.100 Typ.
[2.54]
.100 Typ.
[2.54]
Related Product Data
.050
[1.27]
Typ.
X
Contacts — pages 211-213
Mateable Headers and Posts —
pages 117-125, 127-133
.240
[6.10]
.070
[1.78]
Typ.
.100
[2.54]
Mod IV Wire-Applied Housings
.600
[15.24]
Technical Documents —
Section X-X
X
pages 277, 278
.500
[12.70]
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
R
Optional
1.000
[25.40]
.095
[2.41]
Dia.
1.150
[29.21]
1.900
[48.26]
.095
[2.41]
Dia.
5
Housing with
Strain Relief/Pull Tab
Strain Relief Part No. 87921-1
(10 thru 18 positions)
Keying Plugs
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Material — Natural color nylon
Housing with
Strain Relief/Pull Tab
Strain Relief Part No. 87710-1
(20 positions and larger)
Dimensions
No. of
Pos.
A
6
8
10
12
14
16
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
C
No. of
Detents
.100 [2.54]
.100 [2.54]
.200 [5.08]
.200 [5.08]
.300 [7.62]
.300 [7.62]
1
1
1
1
1
1
B
.100 [2.54]
.200 [5.08]
.200 [5.08]
.300 [7.62]
.300 [7.62]
.400 [10.16]
Part Nos.
Without Strain Relief
With Strain Relief
Stamped*
Unstamped**
Stamped*
87631-2
87631-1
—
87631-4
87631-3
—
87631-6
87631-5
87922-1
87631-8
87631-7
87922-2
1-87631-0
87631-9
87922-3
1-87631-2
1-87631-1
87922-4
**Cavity identification, part number and date code stamped on housing and/or strain relief where size permits.
**No marking on housing or strain relief.
Notes: 1. The Strain Relief/Pull Tab can be bonded to any thermoplastic connector housing.
Notes: 2. Strain reliefs may be purchased separately.
Notes: 3. Contact Extraction/Lance Reset Tool No. 843996-3.
Part No. 87077-2
(Plugs directly into housing)
Note: All part numbers are RoHS compliant.
218
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod IV Wire-Applied Housings, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Dimensions
No. of
Pos.
A
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.900 [73.66]
3.000 [76.20]
3.200 [81.28]
3.300 [83.82]
3.500 [88.90]
3.800 [96.52]
B
C
.400 [10.16]
.500 [12.70]
.500 [12.70]
.600 [15.24]
.600 [15.24]
.700 [17.78]
.700 [17.78]
.800 [20.32]
.800 [20.32]
.900 [22.86]
.900 [22.86]
1.000 [25.40]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.200 [30.48]
1.300 [33.02]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
.400 [10.16]
.400 [10.16]
.500 [12.70]
.500 [12.70]
.600 [15.24]
.600 [15.24]
.700 [17.78]
.700 [17.78]
.800 [20.32]
.800 [20.32]
.900 [22.86]
.900 [22.86]
1.000 [25.40]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.700 [43.18]
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Part Nos.
Without Strain Relief
With Strain Relief
Stamped*
Unstamped**
Stamped*
1-87631-4
1-87631-3
87922-5
1-87631-6
1-87631-5
87733-1
1-87631-8
1-87631-7
—
2-87631-0
1-87631-9
87733-3
2-87631-2
2-87631-1
87733-4
2-87631-4
2-87631-3
—
2-87631-6
2-87631-5
87733-6
2-87631-8
2-87631-7
87733-7
3-87631-0
2-87631-9
87733-8
3-87631-2
3-87631-1
—
—
3-87631-3
—
3-87631-6
3-87631-5
1-87733-1
3-87631-8
3-87631-7
—
4-87631-0
3-87631-9
—
—
5-87631-9
—
4-87631-2
4-87631-1
1-87733-4
—
4-87631-3
—
4-87631-6
4-87631-5
—
—
6-87631-3
—
5-87631-2
5-87631-1
1-87733-7
6-87631-6
6-87631-5
—
—
5-87631-3
—
—
5-87631-5
—
5-87631-8
5-87631-7
—
Mod IV Wire-Applied Housings
18
20
22
24
26
28
30
32
34
36
38
40
42
44
48
50
52
54
58
60
64
66
70
72
No. of
Detents
**Cavity identification, part number and date code stamped on housing and/or strain relief where size permits.
**No marking on housing or strain relief.
Notes: 1. The Strain Relief/Pull Tab can be bonded to any thermoplastic connector housing.
Notes: 2. Strain reliefs may be purchased separately.
Notes: 3. Contact Extraction/Lance Reset Tool No. 843996-3.
5
Note: All part numbers are RoHS compliant.
219
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mod IV Wire-Applied Housings, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Center Polarized
Position No. 1 Indicator
.030
[0.76]
.150†
[3.81]
.570
[14.88]
.130
[3.30]
.130
[3.30]
B
A
Material
Black thermoplastic, flame retardant
Related Product Data
Mod IV Wire-Applied Housings
Contacts — pages 211-213
Mateable Headers and Posts —
AMP-LATCH Low Profile Headers,
Shrouded — pages 135-140
.120
[3.05]
C
.072
[1.83]
X
.285
[7.24]
.227
[5.77]
X
.100
[2.54]
Technical Documents —
.600
[15.24]
R Optional
Section X-X
pages 277, 278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
5
Keying Plugs
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Dimensions
Part Nos.
No. of
Pos.
A
B
C
(Stamped*)
8
.580 [14.73]
.225 [5.72]
.300 [7.62]
1-102387-4
10
.680 [17.27]
.275 [6.98]
.400 [10.16]
102387-1
14
.880 [22.35]
.375 [9.53]
.600 [15.24]
102387-2
16
.980 [24.89]
.425 [10.80]
.700 [17.78]
102387-3
20
1.180 [29.97]
.525 [13.34]
.900 [22.86]
102387-4
22
1.280 [32.51]
.575 [14.61]
1.000 [25.40]
1-102387-5
24
1.380 [35.05]
.625 [15.88]
1.100 [27.94]
102387-5
26
1.480 [37.59]
.675 [17.15]
1.200 [30.48]
102387-6
30
1.680 [42.67]
.775 [19.69]
1.400 [35.56]
102387-7
34
1.880 [47.75]
.875 [22.23]
1.600 [40.64]
102387-8
40
2.180 [55.37]
1.025 [26.04]
1.900 [48.26]
102387-9
44
2.380 [60.45]
1.125 [28.58]
2.100 [53.34]
1-102387-3
50
2.680 [68.07]
1.275 [32.39]
2.400 [60.96]
1-102387-0
60
3.180 [80.77]
1.525 [38.74]
2.900 [73.66]
1-102387-1
64
3.380 [85.85]
1.625 [41.28]
3.100 [78.74]
1-102387-2
*Cavity identification and Tyco Electronics stamped on housing.
†Non-functional slot is used for gating purposes during injection molding process. This gating feature is not inherent in
all production molds. Therefore, the depicted slot will only be present on housings produced on mold tooling requiring
this gating feature.
Note: Contact Extraction/Lance Reset Tool No. 843996-3.
Material — Natural color nylon
Part No. 87077-2
(Plugs directly into housing)
Note: All part numbers are RoHS compliant.
220
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Short Point, Crimp Snap-In Wire-Applied Contacts and Housings
Product Facts
Short point of contact
mates with .169 [4.29]
to .259 [6.58] long post
■
Double-row housings are
end-to-end and side-to-side
stackable
■
Terminates 32-20 AWG
[0.03-0.6 mm2] discrete
wire
■
Contacts have insulation
support to accept a
maximum insulation
diameter of .060 [1.52]
■
Available with .000015
[0.00038] or .000030
[0.00076] gold duplex,
or tin plating
■
Mates with .025 [0.64]
square posts
■
Dual cantilever contact
beams for reliable matings
■
Locking retention latch
provides approximately
3 lb [13.34 N] of retention
force
■
Unique locking latch design
helps prevent latch from
protruding through latch
window
■
Contacts snap into
AMPMODU MTE single-row
housings
■
Double-row housing
configurations include
.100 [2.54] centerline,
plain and polarized
Housing sizes range from
4 to 52 positions
■
Recognized under the
Component Program
of Underwriters
Laboratories Inc.,
File No. E28476
5
104482-9 Short Point Recept. Housing
5-104481-6 Short Point Contact
AMPMODU Short Point
receptacle contacts are
designed to mate with .025
[0.64] square posts. They
will mate with posts as short
as .169 [4.29].
Certified by
Canadian Standards
Association,
File No. LR7189
R
Produced under a Quality
Management System
certified to ISO
9001
ISO900e1d
i
A copy of the
certificate is available
upon request
Wire-to-Board
1-87232-0 Hdr
103688-9 MTE Recept. Housing
1-104479-1 Short Point Contact
R
■
5-104450-3 MTE Hdr
104257-5 MTE Recept. Housing
1-104480-5 Short Point Contact
■
■
104257-3 MTE Recept. Housing
1-104480-4 Short Point Contact
Short Point, Crimp Snap-In WireApplied Contacts and Housings
■
rtif
Ce
Short Point double-row
housings are end-to-end
and side-to-side stackable
on .100 [2.54] centers.
Contacts also can be used
in single-row AMPMODU
MTE housings to provide
a complete wire-crimp
system, or to serve as
replacement contacts.
Performance
Characteristics
Contact Current Rating —
3 amperes
Termination Resistance —
12 milliohms (max.)
Durability — Ref. Product
Specification 108-1472
Note: All part numbers are RoHS compliant.
221
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Short Point Crimp Snap-In Receptacle Contacts
Material and Finish
.068
[1.73]
Copper alloy C7025, plated as follows:
Plating A — Duplex plated .000030
[0.00076] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating B — Duplex plated .000015
[0.00038] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating C — .000100 [0.00254] min.
tin over .000050 [0.00127] min. nickel
on entire contact
.060
[1.52]
.460
[11.68]
Related Product Data
Short Point Contacts
Performance Characteristics —
page 221
Housings used in —
Short Point—pages 223, 224
AMPMODU MTE Unloaded
Housings — pages 228-233
Application Tooling —
page 270-272
C
C
.012
[0.30]
Gap
Technical Documents —
pages 276-278
Product Specification
108-1472
Application Specification
114-25038
Section C - C
5
Keying Plug
Part No. 104072-1
Ten plugs are supplied per strip.
Order quantity reflects the number
of strips required.
Wire Size
Range
AWG
[mm2]
Extraction/Lance Reset
Tool No. 843477-1
Ins.
Dia.
Range
Finish
32-28
0.03-0.08
.025-.060 [0.64-1.52]
26-22
0.13-0.3
.
.025-.060 [0.64-1.52]
24-20
0.2-0.5
.
.025-.060 [0.64-1.52]
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
Quick-Change
Applicator for
AMP-O-LECTRIC
Machine*
Contact Part No.
(Standard Pressure)
Strip Form Loose Piece
1-104481-1
1-104481-0
5-104481-2
1-104480-3
1-104480-2
1-104480-7
1-104479-0
104479-9
104479-8
1-104481-3
1-104481-2
5-104481-6
1-104480-6
1-104480-5
1-104480-4
1-104479-3
1-104479-2
1-104479-1
Applicator for
AMP-O-MATIC
Stripper/Crimper
Machine
Hand
Tool
Nos.
567296-2
466980-1
91518-1
567297-2
466981-1
91518-1
567298-2
466982-1
91551-1
*For use with Model “K” machines. Call the Tooling/Technical Assistance Center (1-800-722-1111) for part nos. of applicators for use with the Model “G”
machines (shown on page 288), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Note: All part numbers are RoHS compliant.
222
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Short Point Wire-Applied Housings, Double-Row, Non-Polarized,
.100 x .100 [2.54 x 2.54] Centerline
A
Material
Black thermoplastic, flame retardant,
94V-0 rated
Related Product Data
Performance Characteristics —
page 221
Contacts — page 222
Mateable Headers —
pages 104, 105
B
.049
[1.24]
X
.049
[1.24] 2 Plc.
.036
[0.91]
.600
[15.24]
.198
[5.03]
.100
[2.54]
.100
[2.54] Typ.
0.72
[1.83]
X
Section X-X
Short Point
Wire-Applied Housings
Technical Documents —
pages 276-278
Product Specification
108-1472
Application Specification
114-25038
No. of
Pos.
4
6
8
10
12
14
16
18
20
22
26
28
30
32
34
36
38
40
44
52
Dimensions
A
B
.198 [5.03]
.100 [2.54]
.298 [7.57]
.200 [5.08]
.398 [10.11]
.300 [7.62]
.498 [12.65]
.400 [10.16]
.598 [15.19]
.500 [12.70]
.698 [17.73]
.600 [15.24]
.798 [20.27]
.700 [17.78]
.898 [22.81]
.800 [20.32]
.998 [25.35]
.900 [22.86]
1.098 [27.89]
1.000 [25.40]
1.298 [32.97]
1.200 [30.48]
1.398 [35.51]
1.300 [33.02]
1.498 [38.05]
1.400 [35.56]
1.598 [40.59]
1.500 [38.10]
1.698 [43.13]
1.600 [40.64]
1.798 [45.67]
1.700 [43.18]
1.898 [48.21]
1.800 [45.72]
1.998 [50.75]
1.900 [48.26]
2.198 [55.83]
2.100 [53.34]
2.598 [65.99]
2.500 [63.50]
Housing
Part No.
104482-1
104482-2
104482-3
104482-4
104482-5
104482-6
104482-7
104482-8
104482-9
1-104482-0
1-104482-1
1-104482-2
1-104482-3
1-104482-4
1-104482-5
1-104482-6
1-104482-7
1-104482-8
1-104482-9
2-104482-0
5
Note: All part numbers are RoHS compliant.
223
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Short Point Wire-Applied Housings, Double-Row, Polarized, .100 x .100
[2.54 x 2.54] Centerline
A
Material
Black thermoplastic, flame retardant,
94V-0 rated
.100
[2.54]
.049
[1.24]
Short Point
Wire-Applied Housings
.049
[1.24] 2 Plc.
X
Related Product Data
Performance Characteristics —
page 221
Contacts — page 222
Mateable Headers —
pages 104, 105, 135-138
.100
[2.54]
.600
[15.24]
.095
[2.41]
.036
[0.91]
.198
[5.03]
.100
[2.54]
.100
[2.54] Typ.
0.72
[1.83]
X
Section X-X
B
Technical Documents —
pages 276-278
Product Specification
108-1472
Application Specification
114-25038
No.of
Pos.
8
10
12
14
18
20
26
30
38
50
52
54
64
5
Dimensions
A
B
.398 [10.11]
.300 [7.62]
.498 [12.65]
.400 [10.16]
.598 [15.19]
.500 [12.70]
.698 [17.73]
.600 [15.24]
.898 [22.81]
.800 [20.32]
.998 [25.35]
.900 [22.86]
1.298 [32.97]
1.200 [30.48]
1.498 [38.05]
1.400 [35.56]
1.898 [48.21]
1.800 [45.72]
2.498 [63.45]
2.400 [60.96]
2.598 [65.99]
2.500 [63.50]
2.698 [68.53]
2.600 [66.04]
3.198 [81.23]
3.100 [78.74]
Housing
Part No.
104483-1
1-104483-1
1-104483-2
104483-9
104483-2
104483-3
104483-4
104483-5
104483-6
1-104483-3
1-104483-0
104483-7
104483-8
Note: Other sizes can be made available on request.
Note: All part numbers are RoHS compliant.
224
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Interconnection System
Product Facts
Receptacle assemblies mate
with .025 [0.64] sq. posts;
mating post length is .200
[5.08] min., .250 [6.35] max.
■
Proven AMPMODU receptacle
contact design; dual
cantilever beams, built-in
anti-overstress, completely
enclosed “box” design,
standard or high-pressure
■
Insulation displacement
technology
■
Two contact sizes for
terminating 30-22 AWG [0.050.3 mm2] wire range; .054
[1.37] max. insulation diameter with an insulation wall
thickness of .015 [0.38] max.
■
Choice of gold duplex or tin
plated contacts
■
Interchangeable crimp
snap-in pin and receptacle
contacts available
■
Housing sizes 2 through
25 positions, single-row .100
[2.54] centers
■
Plain housings are end-to-end
and/or back-to-back stackable
for open pin field applications
■
Optional header with
“swaged tail” feature helps
prevent movement prior to
flow soldering
■
Integral latch provides
positive retention between
header and receptacle
housing
■
Coupling shrouds permit
ganging of smaller connectors
with guide ribs to form larger
single- or double-row
latching connectors
■
Mass terminating tooling
provides lowest applied cost
for most production needs
■
SMT and SMT compatible,
high-temp headers available
■
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
R
■
Certified by Canadian
Standards
Association,
File No. LR7189
R
MTE Interconnection System
■
The AMPMODU MTE
Interconnection System
offers both wire-to-board
and wire-to-wire connectors
using .025 [0.64] sq. post
technology.
The AMPMODU MTE
Interconnection System
consists of single-row
housings with contacts
preloaded on .100 [2.54]
centers. Housings are
furnished with contacts
partially inserted, leaving
the termination areas
exposed. Final contact
insertion can be
accomplished automatically
with Tyco Electronics
application equipment, and
manually when terminated
with the Tyco Electronics
pistol grip hand tool.
The heart of the system is
the insulation displacement
contact design, featured in
both pin and receptacle
contacts. The receptacle
contact, available in either
standard or high-pressure,
features dual cantilever
beams in an enclosed
“box.” The post stop helps
prevent a mating post from
disturbing the wire
termination and also limits
the mating depth of a long
post to protect a wrap-type
termination at the base of
the post. The forward
contact stop helps prevent
contact overinsertion prior
to termination. All contacts
are furnished on carrier
strips which are interlocked
for stability and positive
location during termination.
Single-row housings are
available in sizes 2 through
25 positions. Included are
three styles of receptacle
housings—plain, polarized/
latching and ribbed and two
styles of pin housings,
shrouded with polarizing/
latching feature and ribbed.
5
Performance
Specifications
Electrical Characteristics
Contact Current Rating —
3 amperes for single contact in free air
(Amperage could vary due to ambient
temperature, wire size and duty cycles.)
Contact Termination
Resistance — 15 milliohms (max.)
Dielectric Withstanding Voltage —
At Sea Level–600 VAC, rms
At 70,000 Ft. [21 336 m]–225 VAC, rms
Insulation Resistance —
5,000 megohms (min.)
Environmental Characteristics
Operating Temperature —
-65°C to +105°C
Vibration — 15 G’s (gold), 10 G’s (tin)
Physical Shock — 50 G’s
Industrial Mixed Flow Gasing —
Class 1 (20 days) (gold)
Product Specification
108-25034
Application Specification
114-25026
225
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Interconnection System (Continued)
Wire-to-Board
Receptacle Assemblies
with Guide Ribs
(See pages 232 & 233)
High-Temp Headers,
Polarized/Latching, Straight
and Right Angle Post,
with or without Holddown
2
(See pages 249 & 250)
Receptacle Assemblies
Polarized/Latching
(See pages 230 & 231)
Double-Row Coupling
Shroud (See page 241)
Receptacle
Assemblies,
Polarized/Latching (See
pages 230 & 231)
AMPMODU Shrouded
Headers, Double-Row,
Straight or Right Angle
Post1 (See pages
119-121, 124, 125, 127,
128, 131-133 & 149)
Headers,
Polarized/Latching,
Straight Post, with or
without Swaged Tail
2
(See pages 244 & 245)
MTE Interconnection System
Headers,
Polarized/Latching,
Right Angle Post, with
or without Holddown
(See pages 246 & 247)
Receptacle Assemblies Plain
(See pages 228 and 229)
High Pressure Receptacle Assemblies,
Plain (See page 234)
Receptacle Assemblies
with Guide Ribs
(See pages 232 & 233)
Receptacle Contact,
Insulation Displacement
(Used in all
Receptacle Assemblies)
5
Single-Row Coupling
Shroud (See page 240)
AMPMODU Breakaway Headers,
Single- or Double-Row, Straight
or Right–Angle Post, with or
without Board Retention Feature
(See pages 102-105)
Mating AMPMODU Double-Row Shrouded Header Assemblies must have .318 [8.08] mating post length and .150 [3.81] dimension from centerline of last
post to inside of end shroud wall.
Surface Mount Right-Angle and Vertical Headers are also available (see pages 251 and 252)
1
1
2
226
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Interconnection System (Continued)
Wire-to-Wire
Pin Assemblies, Shrouded
Polarized/Latching
(See pages 236 & 237)
Receptacle Assemblies,
Polarized/Latching
(See pages 230 & 231)
Receptacle Contact,
Insulation Displacement
(Used in all
Receptacle Assemblies)
Pin Contact,
Insulation
Displacement
(Used in all Pin
Assemblies)
Pin Assemblies
with Guide Ribs (See
pages 238 & 239)
Panel Mount
Pin Shroud
(See page 242)
MTE Interconnection System
Receptacle Assemblies Single-Row
with Guide Ribs
Coupling
(See pages 232 & 233) Shroud (See
page 240)
Crimp Snap-In
Receptacle Contact
(Used with Unloaded
Housings—
See page 253)
Crimp Snap-In Pin
Contact (Used with
Unloaded Housings—
See page 254)
Note: For wire-to-wire applications shown above, all pin and receptacle assembly combinations are intermateable.
5
227
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Receptacle Assemblies—Plain, Single-Row, .100 [2.54] Centerline
Receptacle Contacts
(See Note 1)
.520
[13.21]
1.120
[28.45]
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recommended when using the
Tyco Electronics Manual Pistol
Grip Tool.
Material and Finish
MTE Receptacle Assemblies
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze,
plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insulation wall thickness of .015 [0.38] max.
Mating post length for preloaded housings
is .200 [5.08] min., .250 [6.35] max.
5
.600
[15.24]
B
Typ.
A
Position No. 1 Indicator
(Farside)
.100
[2.54] Typ.
.098
[2.49]
Related Product Data
Mateable AMPMODU Products
Breakaway Headers — pages 102110 (with .230 mating length)
Reeled Breakaway Headers —
pages 106, 107 (with .230 mating
length)
Machine Applied Bandolier
Posts — page 163
Single-Row Shrouded Headers
with .066 [1.68] End Dimension —
pages 115, 116
Interchangeable Crimp Contacts
(Short Point) — page 253
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
These receptacle assemblies
with plain housings can be
stacked end-to-end and/or sideto-side for single or double-row
connections to an open pin field
with a .100 [2.54] centerline grid.
228
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Receptacle Assemblies—Strip Form Plain,
Single-Row, .100 [2.54] Centerline (Continued)
Dimensions
No. of
Pos.
2
3
4
5
6
7
8
9
10
11
12
A
B
2.000 [50.80]
.198 [5.03]
2.400 [60.96]
.298 [7.57]
1.990 [50.55] .398 [10.11]
1.990 [50.55] .498 [12.65]
2.390 [60.71] .598 [15.19]
1.400 [35.56] .698 [17.73]
1.600 [40.64] .798 [20.27]
1.800 [45.72] .898 [22.81]
2.000 [50.80] .998 [23.35]
2.200 [55.88] 1.098 [27.89]
2.400 [60.96] 1.198 [30.43]
Housing
Quantities
Per Strip
Segment
10
8
5
4
4
2
2
2
2
2
2
Strip Form Receptacle Assembly
30-26 AWG [0.05-0.15mm2] Wire
Plating A
Plating B
Plating C
5-103979-1
5-103979-2
5-103979-3
5-103979-4
5-103979-5
5-103979-6
5-103979-7
5-103979-8
5-103979-9
6-103979-0
6-103979-1
5-103978-1
5-103978-2
5-103978-3
5-103978-4
5-103978-5
5-103978-6
5-103978-7
5-103978-8
5-103978-9
6-103978-0
6-103978-1
5-103977-1
5-103977-2
5-103977-3
5-103977-4
5-103977-5
5-103977-6
5-103977-7
5-103977-8
5-103977-9
6-103977-0
6-103977-1
Strip Form Receptacle Assembly
26-22 AWG [0.12-0.3mm2] Wire
Plating A
Plating B
Plating C
5-103976-1
5-103976-2
5-103976-3
5-103976-4
5-103976-5
5-103976-6
5-103976-7
5-103976-8
5-103976-9
6-103976-0
6-103976-1
5-103975-1
5-103975-2
5-103975-3
5-103975-4
5-103975-5
5-103975-6
5-103975-7
5-103975-8
5-103975-9
6-103975-0
6-103975-1
5-103974-1
5-103974-2
5-103974-3
5-103974-4
5-103974-5
5-103974-6
5-103974-7
5-103974-8
5-103974-9
6-103974-0
6-103974-1
Unloaded
Housings
103688-1
103688-2
103688-3
103688-4
103688-5
103688-6
103688-7
103688-8
103688-9
1-103688-0
1-103688-1
MTE Receptacle Assemblies
MTE Receptacle Assemblies—Individual Form Plain,
Single-Row, .100 [2.54] Centerline
No. of
Pos.
Dimensions
B
13
14
15
16
17
18
19
20
21
22
23
24
25
1.298 [32.96]
1.398 [35.51]
1.498 [38.05]
1.598 [40.59]
1.698 [43.13]
1.798 [45.67]
1.898 [48.20]
1.998 [50.75]
2.098 [53.29]
2.198 [55.83]
2.298 [58.37]
2.398 [60.91]
2.498 [63.45]
Individual Receptacle Assembly
30-26 AWG [0.05-0.15mm2] Wire
Individual Receptacle Assembly
26-22 AWG [0.12-0.3mm2] Wire
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
6-103903-2
6-103903-3
6-103903-4
6-103903-5
6-103903-6
6-103903-7
6-103903-8
6-103903-9
7-103903-0
7-103903-1
7-103903-2
7-103903-3
7-103903-4
6-103684-2
6-103684-3
6-103684-4
6-103684-5
6-103684-6
6-103684-7
6-103684-8
6-103684-9
7-103684-0
7-103684-1
7-103684-2
7-103684-3
7-103684-4
6-103685-2
6-103685-3
6-103685-4
6-103685-5
6-103685-6
6-103685-7
6-103685-8
6-103685-9
7-103685-0
7-103685-1
7-103685-2
7-103685-3
7-103685-4
6-103902-2
6-103902-3
6-103902-4
6-103902-5
6-103902-6
6-103902-7
6-103902-8
6-103902-9
7-103902-0
7-103902-1
7-103902-2
7-103902-3
7-103902-4
6-103686-2
6-103686-3
6-103686-4
6-103686-5
6-103686-6
6-103686-7
6-103686-8
6-103686-9
7-103686-0
7-103686-1
7-103686-2
7-103686-3
7-103686-4
6-103687-2
6-103687-3
6-103687-4
6-103687-5
6-103687-6
6-103687-7
6-103687-8
6-103687-9
7-103687-0
7-103687-1
7-103687-2
7-103687-3
7-103687-4
Unloaded
Housings
1-103688-2
1-103688-3
1-103688-4
1-103688-5
1-103688-6
1-103688-7
1-103688-8
1-103688-9
2-103688-0
2-103688-1
2-103688-2
2-103688-3
2-103688-4
5
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into
housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts.
3. Keying plugs are available, see page 253.
Note: All part numbers are RoHS compliant.
229
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Receptacle Assemblies—Polarized/Latching,
Single-Row, .100 [2.54] Centerline
Receptacle Contacts
(See Note 1)
.520
[13.21]
Preassembled housings in strip
form are available in positions 2 thru
12. For ease of handling, positions
2 thru 5 are recommended when
using the Tyco Electronics Manual
Pistol Grip Tool.
1.120
[28.45]
.600
[15.24]
Material and Finish
MTE Receptacle Assemblies
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze, plated
as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insulation wall thickness of .015 [0.38] max.
Mating post length for preloaded housings
is .200 [5.08] min., .250 [6.35] max.
5
B
Typ.
A
Position No. 1 Indicator
(Farside)
.100
[2.54] Typ.
.098
[2.49]
Related Product Data
Mateable AMPMODU Products
Pin Assemblies (Polarized/
Latching) — pages 236, 237
Pin Assemblies with Guide
Ribs (installed in Panel Mount
Pin Shroud) — pages 238, 239, 242
Headers (Polarized/Latching) —
pages 244-252
Interchangeable Crimp Contacts
(Short Point) — page 253
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
230
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Receptacle Assemblies—Strip Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline (Continued)
Dimensions
No. of
Pos.
2
3
4
5
6
7
8
9
10
11
12
A
B
2.000 [50.80]
.198 [5.03]
2.400 [60.96]
.298 [7.57]
1.990 [50.55] .398 [10.11]
1.990 [50.55] .498 [12.65]
2.390 [60.71] .598 [15.19]
1.400 [35.56] .698 [17.73]
1.600 [40.64] .798 [20.27]
1.800 [45.72] .898 [22.81]
2.000 [50.80] .998 [23.35]
2.200 [55.88] 1.098 [27.89]
2.400 [60.96] 1.198 [30.43]
Housing
Quantities
Per Strip
Segment
10
8
5
4
4
2
2
2
2
2
2
Strip Form Receptacle Assembly
30-26 AWG [0.05-0.15mm2] Wire
Plating A
Plating B
Plating C
5-103961-1
5-103961-2
5-103961-3
5-103961-4
5-103961-5
5-103961-6
5-103961-7
5-103961-8
5-103961-9
6-103961-0
6-103961-1
5-103960-1
5-103960-2
5-103960-3
5-103960-4
5-103960-5
5-103960-6
5-103960-7
5-103960-8
5-103960-9
6-103960-0
6-103960-1
5-103959-1
5-103959-2
5-103959-3
5-103959-4
5-103959-5
5-103959-6
5-103959-7
5-103959-8
5-103959-9
6-103959-0
6-103959-1
Strip Form Receptacle Assembly
26-22 AWG [0.12-0.3mm2] Wire
Plating A
Plating B
Plating C
5-103958-1
5-103958-2
5-103958-3
5-103958-4
5-103958-5
5-103958-6
5-103958-7
5-103958-8
5-103958-9
6-103958-0
6-103958-1
5-103957-1
5-103957-2
5-103957-3
5-103957-4
5-103957-5
5-103957-6
5-103957-7
5-103957-8
5-103957-9
6-103957-0
6-103957-1
5-103956-1
5-103956-2
5-103956-3
5-103956-4
5-103956-5
5-103956-6
5-103956-7
5-103956-8
5-103956-9
6-103956-0
6-103956-1
Unloaded
Housings
104257-1
104257-2
104257-3
104257-4
104257-5
104257-6
104257-7
104257-8
104257-9
1-104257-0
1-104257-1
MTE Receptacle Assemblies
MTE Receptacle Assemblies—Individual Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline
No. of
Pos.
Dimensions
B
13
14
15
16
17
18
19
20
21
22
23
24
25
1.298 [32.96]
1.398 [35.51]
1.498 [38.05]
1.598 [40.59]
1.698 [43.13]
1.798 [45.67]
1.898 [48.20]
1.998 [50.75]
2.098 [53.29]
2.198 [55.83]
2.298 [58.37]
2.398 [60.91]
2.498 [63.45]
Individual Receptacle Assembly
30-26 AWG [0.05-0.15mm2] Wire
Individual Receptacle Assembly
26-22 AWG [0.12-0.3mm2] Wire
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
6-103897-2
6-103897-3
6-103897-4
6-103897-5
6-103897-6
6-103897-7
6-103897-8
6-103897-9
7-103897-0
7-103897-1
7-103897-2
7-103897-3
7-103897-4
6-103640-2
6-103640-3
6-103640-4
6-103640-5
6-103640-6
6-103640-7
6-103640-8
6-103640-9
7-103640-0
7-103640-1
7-103640-2
7-103640-3
7-103640-4
6-103641-2
6-103641-3
6-103641-4
6-103641-5
6-103641-6
6-103641-7
6-103641-8
6-103641-9
7-103641-0
7-103641-1
7-103641-2
7-103641-3
7-103641-4
6-103734-2
6-103734-3
6-103734-4
6-103734-5
6-103734-6
6-103734-7
6-103734-8
6-103734-9
7-103734-0
7-103734-1
7-103734-2
7-103734-3
7-103734-4
6-103644-2
6-103644-3
6-103644-4
6-103644-5
6-103644-6
6-103644-7
6-103644-8
6-103644-9
7-103644-0
7-103644-1
7-103644-2
7-103644-3
7-103644-4
6-103645-2
6-103645-3
6-103645-4
6-103645-5
6-103645-6
6-103645-7
6-103645-8
6-103645-9
7-103645-0
7-103645-1
7-103645-2
7-103645-3
7-103645-4
Unloaded
Housings
1-104257-2
1-104257-3
1-104257-4
1-104257-5
1-104257-6
1-104257-7
1-104257-8
1-104257-9
2-104257-0
2-104257-1
2-104257-2
2-104257-3
2-104257-4
5
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into
housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts.
3. Keying plugs are available, see page 253.
Note: All part numbers are RoHS compliant.
231
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Receptacle Assemblies—Guide Ribs,
Single-Row, .100 [2.54] Centerline
Receptacle Contacts
(See Note 1)
.520
[13.21]
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recommended
when using the Tyco Electronics
Manual Pistol Grip Tool.
1.120
[28.45]
.600
[15.24]
Material and Finish
MTE Receptacle Assemblies
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze,
plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insulation wall thickness of .015 [0.38] max.
Mating post length for preloaded housings
is .200 [5.08] min., .250 [6.35] max.
5
B
Typ.
A
Position No. 1 Indicator
(Farside)
.100
[2.54] Typ
.098
[2.49]
Related Product Data
Coupling Shrouds used with —
Single-Row — page 240
Double-Row — page 241
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Single-Row Coupling
Shrouds) —
Pin Assemblies (Polarized/
Latching) — pages 236, 237
Pin Assemblies with Guide Ribs
(installed in Panel Mount Pin
Shroud) — pages 238, 239, 242
Headers (Polarized/Latching) —
pages 244-252
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Double-Row Coupling
Shrouds) —
Headers, Shrouded, Double-Row
(.318 [8.08] mating post length,
.150 [3.81] end dimension) —
pages 119-121, 124, 125, 128, 129,
131-133
Interchangeable Crimp Contacts—
(Short Point) — page 253
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
232
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Receptacle Assemblies—Strip Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline (Continued)
Dimensions
No. of
Pos.
2
3
4
5
6
7
8
9
10
11
12
A
B
2.000 [50.80]
.198 [5.03]
2.400 [60.96]
.298 [7.57]
1.990 [50.55] .398 [10.11]
1.990 [50.55] .498 [12.65]
2.390 [60.71] .598 [15.19]
1.400 [35.56] .698 [17.73]
1.600 [40.64] .798 [20.27]
1.800 [45.72] .898 [22.81]
2.000 [50.80] .998 [23.35]
2.200 [55.88] 1.098 [27.89]
2.400 [60.96] 1.198 [30.43]
Housing
Quantities
Per Strip
Segment
10
8
5
4
4
2
2
2
2
2
2
Strip Form Receptacle Assembly
30-26 AWG [0.05-0.15mm2] Wire
Plating A
Plating B
Plating C
5-103973-1
5-103973-2
5-103973-3
5-103973-4
5-103973-5
5-103973-6
5-103973-7
5-103973-8
5-103973-9
6-103973-0
6-103973-1
5-103972-1
5-103972-2
5-103972-3
5-103972-4
5-103972-5
5-103972-6
5-103972-7
5-103972-8
5-103972-9
6-103972-0
6-103972-1
5-103971-1
5-103971-2
5-103971-3
5-103971-4
5-103971-5
5-103971-6
5-103971-7
5-103971-8
5-103971-9
6-103971-0
6-103971-1
Strip Form Receptacle Assembly
26-22 AWG [0.12-0.3mm2] Wire
Plating A
Plating B
Plating C
5-103970-1
5-103970-2
5-103970-3
5-103970-4
5-103970-5
5-103970-6
5-103970-7
5-103970-8
5-103970-9
6-103970-0
6-103970-1
5-103969-1
5-103969-2
5-103969-3
5-103969-4
5-103969-5
5-103969-6
5-103969-7
5-103969-8
5-103969-9
6-103969-0
6-103969-1
5-103968-1
5-103968-2
5-103968-3
5-103968-4
5-103968-5
5-103968-6
5-103968-7
5-103968-8
5-103968-9
6-103968-0
6-103968-1
Unloaded
Housings
103648-1
103648-2
103648-3
103648-4
103648-5
103648-6
103648-7
103648-8
103648-9
1-103648-0
1-103648-1
MTE Receptacle Assemblies
MTE Receptacle Assemblies—Individual Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline
No. of
Pos.
Dimensions
B
13
14
15
16
17
18
19
20
21
22
23
24
25
1.298 [32.96]
1.398 [35.51]
1.498 [38.05]
1.598 [40.59]
1.698 [43.13]
1.798 [45.67]
1.898 [48.20]
1.998 [50.75]
2.098 [53.29]
2.198 [55.83]
2.298 [58.37]
2.398 [60.91]
2.498 [63.45]
Individual Receptacle Assembly
30-26 AWG [0.05-0.15mm2] Wire
Individual Receptacle Assembly
26-22 AWG [0.12-0.3mm2] Wire
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
6-103901-2
6-103901-3
6-103901-4
6-103901-5
6-103901-6
6-103901-7
6-103901-8
6-103901-9
7-103901-0
7-103901-1
7-103901-2
7-103901-3
7-103901-4
6-103649-2
6-103649-3
6-103649-4
6-103649-5
6-103649-6
6-103649-7
6-103649-8
6-103649-9
7-103649-0
7-103649-1
7-103649-2
7-103649-3
7-103649-4
6-103650-2
6-103650-3
6-103650-4
6-103650-5
6-103650-6
6-103650-7
6-103650-8
6-103650-9
7-103650-0
7-103650-1
7-103650-2
7-103650-3
7-103650-4
6-103900-2
6-103900-3
6-103900-4
6-103900-5
6-103900-6
6-103900-7
6-103900-8
6-103900-9
7-103900-0
7-103900-1
7-103900-2
7-103900-3
7-103900-4
6-103651-2
6-103651-3
6-103651-4
6-103651-5
6-103651-6
6-103651-7
6-103651-8
6-103651-9
7-103651-0
7-103651-1
7-103651-2
7-103651-3
7-103651-4
6-103652-2
6-103652-3
6-103652-4
6-103652-5
6-103652-6
6-103652-7
6-103652-8
6-103652-9
7-103652-0
7-103652-1
7-103652-2
7-103652-3
7-103652-4
Unloaded
Housings
1-103648-2
1-103648-3
1-103648-4
1-103648-5
1-103648-6
1-103648-7
1-103648-8
1-103648-9
2-103648-0
2-103648-1
2-103648-2
2-103648-3
2-103648-4
5
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully
inserted into housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics
pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts.
3. Keying plugs are available, see page 253.
Note: All part numbers are RoHS compliant.
233
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE High Pressure Receptacle Assemblies—Plain,
Single-Row, .100 [2.54] Centerline
Receptacle Contacts
(See Note 1)
.520
[13.21]
1.120
[28.45]
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recommended when using the
Tyco Electronics Manual Pistol
Grip Tool.
.600
[15.24]
Material and Finish
B
Typ.
MTE Receptacle Assemblies
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze, duplex
plated .000030 [0.00076] gold on
contact area, .000050 [0.00127] min.
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an
insulation wall thickness of .015 [0.38]
max. Mating post length for preloaded
housings is .200 [5.08] min., .250 [6.35]
max.
A
Position No. 1 Indicator
(Farside)
.100
[2.54] Typ.
.098
[2.49]
Related Product Data
5
Mateable AMPMODU Products
Breakaway Headers — pages 102110, (with .230 mating length)
Reeled Breakaway Headers —
pages 106, 107 (with .230 mating
length)
Machine Applied Bandolier
Posts — page 163
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278)
Product Specification
108-25034
Application Specification
114-25026
No. of
Pos.
A
B
Housings
Quantities Per
Strip Segment
2
3
4
5
6
7
8
9
10
11
12
1.980 [50.29]
1.490 [37.85]
1.990 [50.55]
1.990 [50.55]
2.390 [60.71]
1.400 [35.56]
1.600 [40.64]
1.800 [45.72]
2.000 [50.80]
2.200 [55.88]
2.400 [60.96]
.198 [5.03]
.298 [7.57]
.398 [10.11]
.498 [12.65]
.598 [15.19]
.698 [17.73]
.798 [20.27]
.898 [22.81]
.998 [23.35]
1.098 [27.89]
1.198 [30.43]
10
5
5
4
4
2
2
2
2
2
2
Dimensions
Strip Form
Receptacle
Assembly
30-26 AWG
[.05-.15mm2] Wire
5-104438-1
5-104438-2
5-104438-3
5-104438-4
5-104438-5
5-104438-6
5-104438-7
5-104438-8
5-104438-9
6-104438-0
6-104438-1
Strip Form
Receptacle
Assembly
26-22 AWG
[.12-.30mm2] Wire
5-104439-1
5-104439-2
5-104439-3
5-104439-4
5-104439-5
5-104439-6
5-104439-7
5-104439-8
5-104439-9
6-104439-0
6-104439-1
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched
into “preload” windows. Contacts are fully inserted into housings automatically when terminated with
Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol grip
hand tool.
2. High pressure receptacle contacts can be made available in other housing styles and position sizes.
Contact your Tyco Electronics sales representative.
Note: All part numbers are RoHS compliant.
234
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE High Pressure Receptacle Assemblies – Guide Ribs
Receptacle Contacts
(See Note 1)
.520
[13.21]
1.120
[28.45]
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recommended when using the
Tyco Electronics Manual Pistol
Grip Tool.
.600
[15.24]
B
Typ.
Material and Finish
A
Housing — Thermoplastic, black,
94V-0 rated
Contacts — Phosphor Bronze,
duplex plated .000030 [0.00076] gold
on contact area, .000050 [0.00127] min.
tin on crimp area, with entire contact
underplated .000050 [0.00127] nickel.
Position No. 1 Indicator
(Farside)
.100
[2.54] Typ
MTE Pin Assemblies
Related Product Data
Coupling Shrouds used with —
Single-Row — page 240
Double-Row — page 241
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Single-Row Coupling
Shrouds) —
Pin Assemblies (Polarized/
Latching) — pages 236, 237
Pin Assemblies with Guide Ribs
(installed in Panel Mount Pin
Shroud) — pages 238, 239, 242
Headers (Polarized/Latching) —
pages 244-252
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Double-Row Coupling
Shrouds) —
Headers, Shrouded, Double-Row
(.318 [8.08] mating post length,
.150 [3.81] end dimension) —
pages 119-121, 124, 125, 128, 129,
131-133
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
.098
[2.49]
5
No. of
Pos.
A
B
Housings
Quantities Per
Strip Segment
2
3
4
5
6
7
8
9
10
11
12
1.980 [50.29]
1.490 [37.85]
1.990 [50.55]
1.990 [50.55]
2.390 [60.71]
1.400 [35.56]
1.600 [40.64]
1.800 [45.72]
2.000 [50.80]
2.200 [55.88]
2.400 [60.96]
.198 [5.03]
.298 [7.57]
.398 [10.11]
.498 [12.65]
.598 [15.19]
.698 [17.73]
.798 [20.27]
.898 [22.81]
.998 [23.35]
1.098 [27.89]
1.198 [30.43]
10
5
5
4
4
2
2
2
2
2
2
Dimensions
Strip Form
Receptacle
Assembly
30-26 AWG
[.05-.15mm2] Wire
5-147396-1
5-147396-2
5-147396-3
5-147396-4
5-147396-5
5-147396-6
5-147396-7
5-147396-8
5-147396-9
6-147396-0
6-147396-1
Strip Form
Receptacle
Assembly
26-22 AWG
[.12-.30mm2] Wire
5-147030-3
5-147030-4
5-147030-1
5-147030-2
5-147030-5
5-147030-6
5-147030-7
5-147030-8
5-147030-9
6-147030-0
6-147030-1
Note: All part numbers are RoHS compliant.
235
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Pin Assemblies, Shrouded—Polarized/Latching,
Single-Row, .100 [2.54] Centerline
Pin Contacts
(See Note 1)
.520
[13.21]
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recommended when using the
Tyco Electronics Manual Pistol
Grip Tool.
1.470
[37.34]
Material and Finish
MTE Pin Assemblies
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze, plated
as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insulation wall thickness of .015 [0.38] max.
5
.950
[24.13]
B
Typ.
Position No. 1
Indicator
A
.260
[6.60]
.100
[2.54] Typ.
.200
[5.08]
Related Product Data
Mateable AMPMODU Products —
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
Interchangeable Crimp Contacts —
page 254
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
236
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Pin Assemblies, Shrouded—Strip Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline (Continued)
Dimensions
No. of
Pos.
2
3
4
5
6
7
8
9
10
11
12
A
B
2.360 [59.94]
.295 [7.49]
1.980 [50.29] .395 [10.03]
1.980 [50.29] .495 [12.57]
2.380 [60.45] .595 [15.11]
1.390 [35.31] .695 [17.65]
2.390 [60.71] .795 [20.19]
1.790 [45.47] .895 [22.73]
1.990 [50.57] .995 [25.27]
2.190 [55.63] 1.095 [27.81]
2.390 [60.71] 1.195 [30.35]
2.590 [65.79] 1.295 [32.89]
Housing
Quantities
Per Strip
Segment
8
5
4
4
2
3
2
2
2
2
2
Strip Form Pin Assembly
30-26 AWG [0.05-0.15mm2] Wire
Plating A
Plating B
Plating C
5-103949-1
5-103949-2
5-103949-3
5-103949-4
5-103949-5
5-103949-6
5-103949-7
5-103949-8
5-103949-9
6-103949-0
6-103949-1
5-103948-1
5-103948-2
5-103948-3
5-103948-4
5-103948-5
5-103948-6
5-103948-7
5-103948-8
5-103948-9
6-103948-0
6-103948-1
5-103947-1
5-103947-2
5-103947-3
5-103947-4
5-103947-5
5-103947-6
5-103947-7
5-103947-8
5-103947-9
6-103947-0
6-103947-1
Strip Form Pin Assembly
26-22 AWG [0.12-0.3mm2] Wire
Plating A
Plating B
Plating C
5-103946-1
5-103946-2
5-103946-3
5-103946-4
5-103946-5
5-103946-6
5-103946-7
5-103946-8
5-103946-9
6-103946-0
6-103946-1
5-103945-1
5-103945-2
5-103945-3
5-103945-4
5-103945-5
5-103945-6
5-103945-7
5-103945-8
5-103945-9
6-103945-0
6-103945-1
5-103944-1
5-103944-2
5-103944-3
5-103944-4
5-103944-5
5-103944-6
5-103944-7
5-103944-8
5-103944-9
6-103944-0
6-103944-1
Unloaded
Housings
103653-1
103653-2
103653-3
103653-4
103653-5
103653-6
103653-7
103653-8
103653-9
1-103653-0
1-103653-1
MTE Pin Assemblies
MTE Pin Assemblies, Shrouded—Individual Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline
No. of
Pos.
Dimensions
B
13
14
15
16
17
18
19
20
21
22
23
24
25
1.395 [35.43]
1.495 [37.97]
1.595 [40.51]
1.695 [43.05]
1.795 [45.59]
1.895 [48.13]
1.995 [50.67]
2.095 [53.21]
2.195 [55.75]
2.295 [58.29]
2.395 [60.83]
2.495 [63.37]
2.595 [65.91]
Individual Pin Assembly
30-26 AWG [0.05-0.15mm2] Wire
Individual Pin Assembly
26-22 AWG [0.12-0.3mm2] Wire
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
6-103894-2
6-103894-3
6-103894-4
6-103894-5
6-103894-6
6-103894-7
6-103894-8
6-103894-9
7-103894-0
7-103894-1
7-103894-2
7-103894-3
7-103894-4
6-103658-2
6-103658-3
6-103658-4
6-103658-5
6-103658-6
6-103658-7
6-103658-8
6-103658-9
7-103658-0
7-103658-1
7-103658-2
7-103658-3
7-103658-4
6-103659-2
6-103659-3
6-103659-4
6-103659-5
6-103659-6
6-103659-7
6-103659-8
6-103659-9
7-103659-0
7-103659-1
7-103659-2
7-103659-3
7-103659-4
6-103893-2
6-103893-3
6-103893-4
6-103893-5
6-103893-6
6-103893-7
6-103893-8
6-103893-9
7-103893-0
7-103893-1
7-103893-2
7-103893-3
7-103893-4
6-103660-2
6-103660-3
6-103660-4
6-103660-5
6-103660-6
6-103660-7
6-103660-8
6-103660-9
7-103660-0
7-103660-1
7-103660-2
7-103660-3
7-103660-4
6-103661-2
6-103661-3
6-103661-4
6-103661-5
6-103661-6
6-103661-7
6-103661-8
6-103661-9
7-103661-0
7-103661-1
7-103661-2
7-103661-3
7-103661-4
Unloaded
Housings
1-103653-2
1-103653-3
1-103653-4
1-103653-5
1-103653-6
1-103653-7
1-103653-8
1-103653-9
2-103653-0
2-103653-1
2-103653-2
2-103653-3
2-103653-4
5
Notes: 1. Pin assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted
into housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol
grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove pin contacts.
Note: All part numbers are RoHS compliant.
237
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Pin Assemblies—Guide Ribs,
Single-Row, .100 [2.54] Centerline
Pin Contacts
(See Note 1)
.520
[13.21]
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recommended when using the
Tyco Electronics Manual Pistol
Grip Tool.
Material and Finish
MTE Pin Assemblies
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze,
plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insulation wall thickness of .015 [0.38] max.
5
1.120
[28.45]
.600
[15.24]
B
Typ.
Position No. 1 Indicator
(Farside)
A
.100
[2.54] Typ.
.098
[2.49]
Related Product Data
Mateable AMPMODU MTE Products
(with Pin Assembly Installed in
Panel Mount Pin Shroud) —
pages 242, 243
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single Row
Coupling Shroud) — pages 232, 233,
235, 240
Interchangeable Crimp Contacts —
page 254
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
238
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Pin Assemblies—Strip Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline (Continued)
Dimensions
No. of
Pos.
A
2
3
4
5
6
7
8
9
10
11
12
1.980 [50.29]
1.490 [37.85]
1.990 [50.55]
1.990 [50.55]
2.390 [60.71]
1.400 [35.56]
1.600 [40.64]
1.800 [45.72]
2.000 [50.80]
2.200 [55.88]
2.400 [60.96]
B
0.198 [5.03]
0.298 [7.57]
0.398 [10.11]
0.498 [12.65]
0.598 [15.19]
0.698 [17.73]
0.798 [20.27]
0.898 [22.81]
0.998 [25.35]
1.098 [27.89]
1.198 [30.43]
Housing
Quantities
Per Strip
Segment
10
5
5
4
4
2
2
2
2
2
2
Strip Form Pin Assembly
30-26 AWG [0.05-0.15mm2] Wire
Plating A
Plating B
Plating C
5-103955-1
5-103955-2
5-103955-3
5-103955-4
5-103955-5
5-103955-6
5-103955-7
5-103955-8
5-103955-9
6-103955-0
6-103955-1
5-103954-1
5-103954-2
5-103954-3
5-103954-4
5-103954-5
5-103954-6
5-103954-7
5-103954-8
5-103954-9
6-103954-0
6-103954-1
5-103953-1
5-103953-2
5-103953-3
5-103953-4
5-103953-5
5-103953-6
5-103953-7
5-103953-8
5-103953-9
6-103953-0
6-103953-1
Strip Form Pin Assembly
26-22 AWG [0.12-0.3mm2] Wire
Plating A
Plating B
Plating C
5-103952-1
5-103952-2
5-103952-3
5-103952-4
5-103952-5
5-103952-6
5-103952-7
5-103952-8
5-103952-9
6-103952-0
6-103952-1
5-103951-1
5-103951-2
5-103951-3
5-103951-4
5-103951-5
5-103951-6
5-103951-7
5-103951-8
5-103951-9
6-103951-0
6-103951-1
5-103950-1
5-103950-2
5-103950-3
5-103950-4
5-103950-5
5-103950-6
5-103950-7
5-103950-8
5-103950-9
6-103950-0
6-103950-1
Unloaded
Housings
104503-1
104503-2
104503-3
104503-4
104503-5
104503-6
104503-7
104503-8
104503-9
1-104503-0
1-104503-1
MTE Pin Assemblies
MTE Pin Assemblies—Individual Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline
No. of
Pos.
Dimensions
B
13
14
15
16
17
18
19
20
21
22
23
24
25
1.398 [35.51]
1.498 [38.05]
1.598 [40.59]
1.698 [43.13]
1.798 [45.67]
1.898 [48.20]
1.998 [50.75]
2.098 [53.29]
2.198 [55.83]
2.298 [58.37]
2.398 [60.91]
2.498 [63.45]
2.598 [65.99]
Individual Pin Assembly
30-26 AWG [0.05-0.15mm2] Wire
Individual Pin Assembly
26-22 AWG [0.12-0.3mm2] Wire
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
6-103896-2
6-103896-3
6-103896-4
6-103896-5
6-103896-6
6-103896-7
6-103896-8
6-103896-9
7-103896-0
7-103896-1
7-103896-2
7-103896-3
7-103896-4
6-103657-2
6-103657-3
6-103657-4
6-103657-5
6-103657-6
6-103657-7
6-103657-8
6-103657-9
7-103657-0
7-103657-1
7-103657-2
7-103657-3
7-103657-4
6-103656-2
6-103656-3
6-103656-4
6-103656-5
6-103656-6
6-103656-7
6-103656-8
6-103656-9
7-103656-0
7-103656-1
7-103656-2
7-103656-3
7-103656-4
6-103895-2
6-103895-3
6-103895-4
6-103895-5
6-103895-6
6-103895-7
6-103895-8
6-103895-9
7-103895-0
7-103895-1
7-103895-2
7-103895-3
7-103895-4
6-103655-2
6-103655-3
6-103655-4
6-103655-5
6-103655-6
6-103655-7
6-103655-8
6-103655-9
7-103655-0
7-103655-1
7-103655-2
7-103655-3
7-103655-4
6-103654-2
6-103654-3
6-103654-4
6-103654-5
6-103654-6
6-103654-7
6-103654-8
6-103654-9
7-103654-0
7-103654-1
7-103654-2
7-103654-3
7-103654-4
Unloaded
Housings
1-104503-2
1-104503-3
1-104503-4
1-104503-5
1-104503-6
1-104503-7
1-104503-8
1-104503-9
2-104503-0
2-104503-1
2-104503-2
2-104503-3
2-104503-4
5
Notes: 1. Pin assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted
into housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol grip
hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove pin contacts.
Note: All part numbers are RoHS compliant.
239
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Coupling Shrouds for MTE Receptacle Assemblies with Guide Ribs
Single-Row
.307
[7.80]
A
Material
Black thermoplastic, 94V-0 rated
.582
[14.78]
Technical Documents —
pages 277, 278
No. of
Pos.
4
5
6
7
8
9
10
11
12
13
14
Dimension
A
.485 [12.32]
.585 [14.86]
.685 [17.40]
.785 [19.94]
.885 [22.48]
.985 [25.02]
1.085 [27.56]
1.185 [30.10]
1.285 [32.64]
1.385 [35.18]
1.485 [37.72]
Single-Row
Coupling Shroud
103680-1
103680-2
103680-3
103680-4
103680-5
103680-6
103680-7
103680-8
103680-9
1-103680-0
1-103680-1
MTE Coupling Shrouds
Product Specification
108-25034
Application Specification
114-25026
No. of
Pos.
15
16
17
18
19
20
21
22
23
24
25
Dimension
A
1.585 [40.26]
1.685 [42.80]
1.785 [45.34]
1.885 [47.88]
1.985 [50.42]
2.085 [52.96]
2.185 [55.50]
2.285 [58.04]
2.385 [60.58]
2.485 [63.12]
2.585 [65.66]
Single-Row
Coupling Shroud
1-103680-2
1-103680-3
1-103680-4
1-103680-5
1-103680-6
1-103680-7
1-103680-8
1-103680-9
2-103680-0
2-103680-1
2-103680-2
Pin Assemblies with Guide
Ribs, Installed in Panel
Mount Pin Shroud (Refer to
pages 238, 239 & 242)
Pin Assembly,
Shrouded
Polarized/Latching
(Refer to pages
236 & 237)
5
Receptacle
Assemblies with Guide
Ribs (Refer to pages
232, 233, 235)
Single-Row
Coupling Shroud
Headers, Polarized/Latching,
Straight and Right Angle Post,
with or without Holddown
(See pages 244-252)
Typical Application of Single-Row Coupling Shroud and Mating AMPMODU MTE Products
Note: All part numbers are RoHS compliant.
240
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Coupling Shrouds for MTE Receptacle Assemblies with Guide Ribs (Continued)
Double-Row
Material
.735
[18.67]
Black thermoplastic, 94V-0 rated
Technical Documents —
Position No. 1
Identification
pages 277, 278
A
Product Specification
108-25034
Application Specification
114-25026
Dimension
A
.585 [14.86]
.685 [17.40]
.785 [19.94]
.885 [22.48]
.985 [25.02]
1.085 [27.56]
1.185 [30.10]
1.285 [32.64]
1.385 [35.18]
1.485 [37.72]
1.585 [40.26]
1.685 [42.80]
1.785 [45.34]
1.885 [47.88]
2.185 [55.50]
2.685 [68.20]
Double-Row
Coupling Shroud
103681-1
103681-2
103681-3
103681-4
103681-5
104500-1
104500-2
104500-3
104500-4
104500-5
104500-6
104500-7
104500-8
104500-9
1-104500-0
1-104500-1
MTE Coupling Shrouds
No. of
Pos.
8
10
12
14
16
18
20
22
24
26
28
30
32
34
40
50
5
AMPMODU Shrouded
Headers Double-Row, Straight
or Right–Angle Post1
Double-Row
Coupling Shroud
Receptacle
Assemblies with Guide
Ribs (Refer to pages
232, 233 & 235)
Mating AMPMODU Double-Row Shrouded Headers must have .318 [8.08] mating post length and .150 [3.81] dimension from centerline
of last post to inside of end shroud wall.
1
1
Typical Application of Double-Row Coupling Shroud and Mating AMPMODU Products
Note: All part numbers are RoHS compliant.
241
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Panel Mount Pin Shrouds for MTE Pin Assemblies
with Guide Ribs, Single-Row
Material
.310
[7.87]
Black thermoplastic, 94V-0 rated
A
.250
[6.35]
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
.990
[25.15]
Position No. 1
Identification
MTE Panel Mount
Pin Shrouds
.320
[8.13]
.270
[6.86]
.320
[8.13]
B
5
No. of
Pos.
2
3
4
5
6
7
8
9
10
11
12
13
Dimensions
A
B
.735 [18.67]
.625 [15.88]
.835 [21.21]
.725 [18.42]
.935 [23.75]
.825 [20.96]
1.035 [26.29]
.925 [23.50]
1.135 [28.83]
1.025 [26.04]
1.235 [31.37]
1.125 [28.58]
1.335 [33.91]
1.225 [31.12]
1.435 [36.45]
1.325 [33.66]
1.535 [38.99]
1.425 [36.20]
1.635 [41.53]
1.525 [38.74]
1.735 [44.07]
1.625 [41.28]
1.835 [46.61]
1.725 [43.82]
Panel Mount
Pin Shroud
103682-1
103682-2
103682-3
103682-4
103682-5
103682-6
103682-7
103682-8
103682-9
1-103682-0
1-103682-1
1-103682-2
No. of
Pos.
14
15
16
17
18
19
20
21
22
23
24
25
Dimensions
A
B
1.935 [49.15]
1.825 [46.36]
2.035 [51.69]
1.925 [48.90]
2.135 [54.23]
2.025 [51.44]
2.235 [56.77]
2.125 [53.98]
2.335 [59.31]
2.225 [56.52]
2.435 [61.85]
2.325 [59.06]
2.535 [64.39]
2.425 [61.60]
2.635 [66.93]
2.525 [64.14]
2.735 [69.47]
2.625 [66.68]
2.835 [72.01]
2.725 [69.22]
2.935 [74.55]
2.825 [71.76]
3.035 [77.09]
2.925 [74.30]
Panel Mount
Pin Shroud
1-103682-3
1-103682-4
1-103682-5
1-103682-6
1-103682-7
1-103682-8
1-103682-9
2-103682-0
2-103682-1
2-103682-2
2-103682-3
2-103682-4
Note: All part numbers are RoHS compliant.
242
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Panel Mount Pin Shrouds for MTE Pin Assemblies
with Guide Ribs, Single-Row (Continued)
Material
Black thermoplastic, 94V-0 rated
Technical Documents —
pages 277, 278
Pin Assembly with
Guide Ribs (Refer to
pages 238 & 239)
Product Specification
108-25034
Application Specification
114-25026
Panel Mount
Pin Shroud
Receptacle Assemblies with Guide
Ribs, Installed in
Single-Row Coupling Shroud
(Refer to pages 232, 233, 235 & 240)
Rear of Panel
MTE Panel Mount
Pin Shrouds
Receptacle Assembly,
Polarized/Latching (Refer
to pages 230 & 231)
Typical Application of Panel Mount Pin Shroud and Mating AMPMODU Products
5
243
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Headers, Shrouded Polarized/Latching,
Single-Row .100 [2.54] Centerline
.025 [0.64] Square
Straight Post (With or
Without Swaged Tail)
.535
[13.59]
Swaged Retention Tail
(See Note)
Position No. 1 Indicator
A
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
post
MTE Headers
.230
[5.84]
B
C
.060
[1.52]
X
.200
[5.08]
.120
[3.05]
.100
Typ.
[2.54]
.200
Ref.
[5.08]
(Contact Area)
.100
[2.54]
.130
[3.30]
.275
[6.98]
.350
[8.89]
X
.060
[1.52]
Section X-X
C
.100*
Typ.
[2.54]
Related Product Data
5
Mateable AMPMODU MTE
Products —
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
pages 232, 233, 235, 240
.035±.003
Dia. Typ.
[0.89±0.08]
or
.040±.003
Dia. Typ.
[1.02±0.08]
(for Retention Tails)
Recommended PC Board Hole Layout
*±.003 [±0.08]; tolerances not to accumulate within one connector pattern.
Note: Swaged retention tails are provided in a minimum of two locations per header.
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
244
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Headers, Shrouded Polarized/Latching,
Single-Row .100 [2.54] Centerline (Continued)
A
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
Dimensions
B
C
.220 [5.59]
.100 [2.54]
.320 [8.13]
.200 [5.08]
.420 [10.67]
.300 [7.62]
.520 [13.21]
.400 [10.16]
.620 [15.75]
.500 [12.70]
.720 [18.29]
.600 [15.24]
.820 [20.83]
.700 [17.78]
.920 [23.37]
.800 [20.32]
1.020 [25.91]
.900 [22.86]
1.120 [28.45] 1.000 [25.40]
1.220 [30.99] 1.100 [27.94]
1.320 [33.53] 1.200 [30.48]
1.420 [36.07] 1.300 [33.02]
1.520 [38.61] 1.400 [35.56]
1.620 [41.15] 1.500 [38.10]
1.720 [43.69] 1.600 [40.64]
1.820 [46.23] 1.700 [43.18]
1.920 [48.77] 1.800 [45.72]
2.020 [51.31] 1.900 [48.26]
2.120 [53.85] 2.000 [50.80]
2.220 [56.39] 2.100 [53.34]
2.320 [58.93] 2.200 [55.88]
2.420 [61.47] 2.300 [58.42]
2.520 [64.01] 2.400 [60.96]
Polarized/Latching Header With Swage
Plating A
Plating B
Plating C
5-103908-1
5-104362-1
5-103669-1
5-103908-2
5-104362-2
5-103669-2
5-103908-3
5-104362-3
5-103669-3
5-103908-4
5-104362-4
5-103669-4
5-103908-5
5-104362-5
5-103669-5
5-103908-6
5-104362-6
5-103669-6
5-103908-7
5-104362-7
5-103669-7
5-103908-8
5-104362-8
5-103669-8
5-103908-9
5-104362-9
5-103669-9
6-103908-0
6-104362-0
6-103669-0
6-103908-1
6-104362-1
6-103669-1
6-103908-2
6-104909-2
6-103669-2
6-103908-3
6-104909-3
6-103669-3
6-103908-4
6-104909-4
6-103669-4
6-103908-5
6-104909-5
6-103669-5
6-103908-6
6-104909-6
6-103669-6
6-103908-7
6-104909-7
6-103669-7
6-103908-8
6-104909-8
6-103669-8
6-103908-9
6-104909-9
6-103669-9
7-103908-0
7-104909-0
7-103669-0
7-103908-1
7-104909-1
7-103669-1
7-103908-2
7-104909-2
7-103669-2
7-103908-3
7-104909-3
7-103669-3
7-103908-4
7-104909-4
7-103669-4
Polarized/Latching Header Without Swage
Plating A
Plating B
Plating C
5-103735-1
5-104363-1
5-103639-1
5-103735-2
5-104363-2
5-103639-2
5-103735-3
5-104363-3
5-103639-3
5-103735-4
5-104363-4
5-103639-4
5-103735-5
5-104363-5
5-103639-5
5-103735-6
5-104363-6
5-103639-6
5-103735-7
5-104363-7
5-103639-7
5-103735-8
5-104363-8
5-103639-8
5-103735-9
5-104363-9
5-103639-9
6-103735-0
6-104363-0
6-103639-0
6-103735-1
6-104363-1
6-103639-1
6-103735-2
6-104910-2
6-103639-2
6-103735-3
6-104910-3
6-103639-3
6-103735-4
6-104910-4
6-103639-4
6-103735-5
6-104910-5
6-103639-5
6-103735-6
6-104910-6
6-103639-6
6-103735-7
6-104910-7
6-103639-7
6-103735-8
6-104910-8
6-103639-8
6-103735-9
6-104910-9
6-103639-9
7-103735-0
7-104910-0
7-103639-0
7-103735-1
7-104910-1
7-103639-1
7-103735-2
7-104910-2
7-103639-2
7-103735-3
7-104910-3
7-103639-3
7-103735-4
7-104910-4
7-103639-4
MTE Headers
No. of
Pos.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Notes: 1. Selectively loaded headers are available, consult Tyco Electronics.
2. Use Keying Tool No. 91417-1 to remove post for keying.
5
Note: All part numbers are RoHS compliant.
245
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline
.025 [0.64] Square
Right-Angle Post
With Holddown
.535
[13.59]
Position No. 1 Indicator
A
B
C
Material and Finish
MTE Headers
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
post
.060
[1.52]
.100
Typ.
[2.54]
X
.100
[2.54]
.230
[5.84]
.200
Ref.
[5.08]
(Contact Area)
.200
[5.08]
.365
[9.27]
.275
[6.99]
.130
[3.30]
.120
[3.05]
X
.060
[1.52]
.134±.003
Dia.
[3.40±0.08]
(2 Plc.)
.340±.003
Typ.
[8.64±0.08]
.100*
Typ.
[2.54]
.350
[8.89]
.145
[3.68]
Section X-X
.055±.003
Typ.
[1.40±0.08]
.035±.003
Dia. Typ.
[0.89±0.08]
C
Recommended PC Board Hole Layout
(PC board thickness (for Holddown Feature) is .062±.008 [1.57±0.20])
*±.003 [±0.08]; tolerance not to accumulate within one connector pattern.
5
Without Holddown
.535
[13.59]
Related Product Data
Position No. 1 Indicator
Mateable AMPMODU MTE
Products —
Receptacle Assemblies
(Latching) — pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
pages 232, 233, 235, 240
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
A
B
.060
[1.52]
C
.100
Typ.
[2.54]
X
.100
[2.54]
.230
[5.84]
.200
Ref.
[5.08]
(Contact Area)
.200 .275
[5.08] [6.99]
.130
[3.30]
.120
[3.05]
.060
[1.52]
X
.350
[8.89]
C
.145
[3.68]
Section X-X
.100*
Typ.
[2.54]
.035±.003
Dia. Typ.
[0.89±0.08]
Recommended PC Board Hole Layout
*±.003 [±0.08]; tolerance not to accumulate within one connector pattern.
246
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline (Continued)
No. of
Pos.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
A
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
Dimensions
B
C
.220 [5.59]
.100 [2.54]
.320 [8.13]
.200 [5.08]
.420 [10.67]
.300 [7.62]
.520 [13.21]
.400 [10.16]
.620 [15.75]
.500 [12.70]
.720 [18.29]
.600 [15.24]
.820 [20.83]
.700 [17.78]
.920 [23.37]
.800 [20.32]
1.020 [25.91]
.900 [22.86]
1.120 [28.45] 1.000 [25.40]
1.220 [30.99] 1.100 [27.94]
1.320 [33.53] 1.200 [30.48]
1.420 [36.07] 1.300 [33.02]
1.520 [38.61] 1.400 [35.56]
1.620 [41.15] 1.500 [38.10]
1.720 [43.69] 1.600 [40.64]
1.820 [46.23] 1.700 [43.18]
1.920 [48.77] 1.800 [45.72]
2.020 [51.31] 1.900 [48.26]
2.120 [53.85] 2.000 [50.80]
2.220 [56.39] 2.100 [53.34]
2.320 [58.93] 2.200 [55.88]
2.420 [61.47] 2.300 [58.42]
2.520 [64.01] 2.400 [60.96]
Latching Header With Hold Down
Plating A
Plating B
Plating C
5-103904-1
5-103673-1
5-103672-1
5-103904-2
5-103673-2
5-103672-2
5-103904-3
5-103673-3
5-103672-3
5-103904-4
5-103673-4
5-103672-4
5-103904-5
5-103673-5
5-103672-5
5-103904-6
5-103673-6
5-103672-6
5-103904-7
5-103673-7
5-103672-7
5-103904-8
5-103673-8
5-103672-8
5-103904-9
5-103673-9
5-103672-9
6-103904-0
6-103673-0
6-103672-0
6-103904-1
6-103673-1
6-103672-1
6-103904-2
6-103673-2
6-103672-2
6-103904-3
6-103673-3
6-103672-3
6-103904-4
6-103673-4
6-103672-4
6-103904-5
6-103673-5
6-103672-5
6-103904-6
6-103673-6
6-103672-6
6-103904-7
6-103673-7
6-103672-7
6-103904-8
6-103673-8
6-103672-8
6-103904-9
6-103673-9
6-103672-9
7-103904-0
7-103673-0
7-103672-0
7-103904-1
7-103673-1
7-103672-1
7-103904-2
7-103673-2
7-103672-2
7-103904-3
7-103673-3
7-103672-3
7-103904-4
7-103673-4
7-103672-4
Latching Header Without Hold Down
Plating A
Plating B
Plating C
5-104935-5
5-103635-1
5-103634-1
5-104935-3
5-103635-2
5-103634-2
5-104935-1
5-103635-3
5-103634-3
5-104935-6
5-103635-4
5-103634-4
5-104935-7
5-103635-5
5-103634-5
5-104935-8
5-103635-6
5-103634-6
5-104935-2
5-103635-7
5-103634-7
5-104935-9
5-103635-8
5-103634-8
6-104935-0
5-103635-9
5-103634-9
6-104935-1
6-103635-0
6-103634-0
5-104935-4
6-103635-1
6-103634-1
6-104935-2
6-103635-2
6-103634-2
6-104935-3
6-103635-3
6-103634-3
6-104935-4
6-103635-4
6-103634-4
6-104935-5
6-103635-5
6-103634-5
6-104935-6
6-103635-6
6-103634-6
6-104935-7
6-103635-7
6-103634-7
6-104935-8
6-103635-8
6-103634-8
6-104935-9
6-103635-9
6-103634-9
7-104935-0
7-103635-0
7-103634-0
7-104935-1
7-103635-1
7-103634-1
7-104935-2
7-103635-2
7-103634-2
7-104935-3
7-103635-3
7-103634-3
7-104935-4
7-103635-4
7-103634-4
MTE Headers
Notes: 1. Selectively loaded headers are available, consult Tyco Electronics.
2. Use Keying Tool No. 91417-1 to remove post for keying.
5
Note: All part numbers are RoHS compliant.
247
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline
.025 [0.64] Square Straight
Post (With Swaged Tails
and PC Board Orientation)
.535
[13.59]
Swaged Retention Tail
(See Note)
Position No. 1 Indicator
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, plated .000100
[0.00254] tin over .000050 [0.00127]
nickel on entire post
.120
[3.05]
MTE Headers
.070
[1.78]
X
.100
[2.54]
.050
[1.27]
Dia.
.260
[6.60]
.200
[5.08]
.060
[1.52]
Mateable AMPMODU MTE
Products —
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
pages 232, 233, 235, 240
X
.050
[1.27]
.100
[2.54]
Typ.
C
.100*
Typ.
[2.54]
Technical Documents —
.230
[5.84]
.065±.003
Dia.
[1.65±0.08]
.130
[3.30]
.135±.003
[3.43±0.08]
.040±.003
Dia. Typ.
[1.02±0.08]
(for Retention Tails)
pages 277, 278
5
B
C
Related Product Data
Product Specification
108-25034
Application Specification
114-25026
A
.060
[1.52]
(2 Plc.)
Material and Finish
.075±.003
[1.91±0.08]
.350
[8.89]
Section X-X
Recommended PC Board Hole Layout
*±.003 [±0.08]; tolerances not to accumulate within one connector pattern.
Note: Swaged retention tails are provided in a minimum of two locations per header.
No. of
Pos.
2
3
4
5
6
7
8
9
10
A
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
Dimensions
B
.220 [5.59]
.320 [8.13]
.420 [10.67]
.520 [13.21]
.620 [15.75]
.720 [18.29]
.820 [20.83]
.920 [23.37]
1.020 [25.91]
C
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
Latching
Header
5-104450-1
5-104450-2
5-104450-3
5-104450-4
5-104450-5
5-104450-6
5-104450-7
5-104450-8
5-104450-9
Note: All part numbers are RoHS compliant.
248
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Headers, Through-hole, Surface Mount Compatible,
Shrouded Polarized/Latching, Single-Row .100 [2.54] Centerline
.025 [0.64] Square Straight
Post (With Swaged Tails
and PC Board Orientation)
.535
[13.59]
Swaged Retention Tail
(See Note)
Position No. 1 Indicator
A
B
Material and Finish
C
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min tin on solder tail, with
entire post underplated .000050
[0.00127] nickel
.060
[1.52]
.230
[5.84]
.100
[2.54]
.200
Ref.
[5.08]
(Contact Area)
X
.262
[6.65]
.120
[3.05]
.060
[1.52]
.200
[5.08]
.100 Typ.
[2.54]
.350
[8.89]
.130
[3.30]
X
Related Product Data
Section X-X
.040±.002 Typ.
[1.02±0.05]
.100*
Typ.
[2.54]
.065±.003
[1.65±0.08]
.180±.002
[4.57±0.05]
.135±.003
[3.43±0.08]
.040±.003 Dia. Typ.
[1.02±0.08]
Plated-Thru Hole
Technical Documents —
.020±.002
[0.51±0.05]
Typ.
Header Profile (Shown for
orientation purposes only)
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
MTE Headers
Mateable AMPMODU MTE
Products —
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
pages 232, 233, 235, 240
Receptacle Assemblies (Polarized
Latching) — pages 230, 231
5
.075±.003
[1.90±0.08]
Recommended PC Board Hole Layout
(Stencil Thickness = .010 [0.25])
*±.003 [±0.08] tolerance not to accumulate within one connector pattern
No. of
Pos.
2
3
4
5
6
7
8
9
10
11
12
A
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
Dimensions
B
.220 [5.59]
.320 [8.13]
.420 [10.67]
.520 [13.21]
.620 [15.75]
.720 [18.29]
.820 [20.83]
.920 [23.37]
1.020 [25.91]
1.120 [28.45]
1.220 [30.99]
C
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
Polarized/Latching
Header, High-Temp
5-104809-1
5-104809-2
5-104809-3
5-104809-4
5-104809-5
5-104809-6
5-104809-7
5-104809-8
5-104809-9
6-104809-0
6-104809-1
Note: All part numbers are RoHS compliant.
249
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Headers, Polarized/Latching, Through-Hole,
Surface Mount Compatible, Single-Row, .100 [2.54] Centerline
.025 [0.64] Square
Right-Angle Post (With
Holddown)
.535
[13.59]
Position No. 1 Indicator
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min. tin on solder tail, with
entire post underplated .000050
[0.00127] nickel
.230
[5.84]
A
.060
[1.52]
(2 Plc.)
B
C
.100 Typ.
[2.54]
.120
[3.05]
.100
[2.54]
X
.262
[6.65]
.145
[3.68]
X
.350
[8.89]
.145
[3.68]
Section X-X
.093+.003
-.000 Dia.
.093
2.36+0.08
-.000
(2 Plc.)
.093
Mateable AMPMODU MTE
Products —
Receptacle Assemblies (Polarized/
Latching) — pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
MTE Headers
.200
[5.08]
.180
[4.57]
.060
[1.52]
Related Product Data
[
.340±.003
[8.64±0.08]
.035±.003
Dia. Typ.
[0.89±0.08]
Plated-Thru Hole
Technical Documents —
5
.200
Ref.
[5.08]
(Contact Area)
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
]
.090±.002
[2.29±0.05]
.100* Typ.
[2.54]
.070±.002 Typ.
[1.78±0.51]
C
.058±.003
[1.47±0.08]
(2 Plc.)
Recommended PC Board
(Stencil Thickness = .010 [0.25])
*±.003 [±0.08]; tolerance is not to accumulate within one connector pattern.
No. of
Pos.
A
Dimensions
B
C
2
3
4
5
6
7
8
9
10
11
12
13
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
.220 [5.59]
.320 [8.13]
.420 [10.67]
.520 [13.21]
.620 [15.75]
.720 [18.29]
.820 [20.83]
.920 [23.37]
1.020 [25.91]
1.120 [28.44]
1.220 [30.99]
1.320 [33.53]
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
Right-Angle
Header
with Hold Down
5-104361-1
5-104361-2
5-104361-3
5-104361-4
5-104361-5
5-104361-6
5-104361-7
5-104361-8
5-104361-9
6-104361-0
6-104361-1
6-104361-2
No. of
Pos.
A
Dimensions
B
C
14
15
16
17
18
19
20
21
22
23
24
25
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
1.420 [36.07]
1.520 [38.61]
1.620 [41.15]
1.720 [43.69]
1.820 [46.23]
1.920 [48.77]
2.020 [51.31]
2.120 [53.85]
2.220 [56.39]
2.320 [58.93]
2.420 [61.47]
2.520 [64.01]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
Right-Angle
Header
with Hold Down
6-104361-3
6-104361-4
6-104361-5
6-104361-6
6-104361-7
6-104361-8
6-104361-9
7-104361-0
7-104361-1
7-104361-2
7-104361-3
7-104361-4
Note: All part numbers are RoHS compliant.
250
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Headers, Right-Angle, Polarized/Latching, Surface Mount
E
.025
[0.64] Typ.
.120
[3.05]
Ø.085±.002
[2.16±0.05]
.065 Min Pad on
[1.65] Underside 2 Plc
.140
[3.56]
.535
[13.59]
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Posts — Brass, plated as follows:
Plating A — Duplex plated .000030
[.00076] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
Plating B — Duplex plated .000015
[.00038] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
Plating C — .000100 [.00254] tin over
.000050 [.00127] nickel on entire post
.133
[3.38]
.070±.002 Typ
[1.78±0.05]
Position No. 1 Indicator
A
.120
[3.05]
.200
[5.08]
D
.002
[0.05]
(Tangent
of heel)
Product Specification
108-25034
Application Specification
114-25026
Note: All part numbers are RoHS
compliant.
.076
[1.93]
.288
[7.32]
Ref
]
+ 0.05
- 0.07
.038 2 Plc
[0.97]
.350
[8.89]
.200
[5.08] Ref
Contact Area
K
K
[1.19
.457
[11.61]
Ref
See L
Section K-K
MTE Headers
Technical Documents —
C
B
.262
[6.65]
.047 -.003
(Plated thru hole)
Recommended PC Board Layout
(Refer to MTE Application Spec.
114-25026 for Stencil Aperture Layout
Using .006 [0.152] or .008 [0.203]
Stencil Thickness)
pages 277, 278
+ .002
Ø
Recommended
PC Board Layout
Mateable AMPMODU MTE
Products —
Receptacle Assemblies (Polarized/
Latching) — pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
.190±.001
[4.83±0.02]
2 Plc
.265
[6.73]
.165±.003
[4.19±0.07]
C
Related Product Data
.136±.001
[3.45±0.02]
2 Plc
.054/.039
[1.37/0.99]
View L
5
.140±.002
[3.56±0.05]
No. of
Pos.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
A
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
B
.220 [5.59]
.320 [8.13]
.420 [10.67]
.520 [13.21]
.620 [15.75]
.720 [18.29]
.820 [20.83]
.920 [23.37]
1.020 [25.91]
1.120 [28.45]
1.220 [30.99]
1.320 [33.53]
1.420 [36.07]
1.520 [38.61]
1.620 [41.15]
1.720 [43.69]
1.820 [46.23]
1.920 [48.77]
2.020 [51.31]
2.120 [53.85]
2.220 [56.39]
2.320 [58.93]
2.420 [61.47]
2.520 [64.01]
Dimensions
C
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
D
.140 [3.56]
.190 [4.83]
.240 [6.10]
.290 [7.37]
.340 [8.64]
.390 [9.91]
.440 [11.18]
.490 [12.45]
.540 [13.72]
.590 [14.99]
.640 [16.26]
.690 [17.53]
.740 [18.80]
.790 [20.07]
.840 [21.34]
.890 [22.61]
.940 [23.88]
.990 [25.15]
1.040 [26.42]
1.090 [27.69]
1.140 [28.96]
1.190 [30.23]
1.240 [31.50]
1.290 [32.77]
E
.290 [7.37]
.390 [9.91]
.490 [12.45]
.590 [14.99]
.690 [17.53]
.790 [20.07]
.890 [22.61]
.990 [25.15]
1.090 [27.69]
1.190 [30.23]
1.290 [32.77]
1.390 [35.31]
1.490 [37.85]
1.590 [40.39]
1.690 [42.93]
1.790 [45.47]
1.890 [48.01]
1.990 [50.55]
2.090 [53.09]
2.190 [55.63]
2.290 [58.17]
2.390 [60.71]
2.490 [63.25]
2.590 [65.79]
Right-Angle Latching SMT Headers
Plating A
Plating B
Plating C
5-147323-1
5-147278-1 5-147324-1
5-147323-2
5-147278-2 5-147324-2
5-147323-3
5-147278-3 5-147324-3
5-147323-4
5-147278-4 5-147324-4
5-147323-5
5-147278-5 5-147324-5
5-147323-6
5-147278-6 5-147324-6
5-147323-7
5-147278-7 5-147324-7
5-147323-8
5-147278-8 5-147324-8
5-147323-9
5-147278-9 5-147324-9
6-147323-0
6-147278-0 6-147324-0
6-147323-1
6-147278-1 6-147324-1
6-147323-2
6-147278-2 6-147324-2
6-147323-3
6-147278-3 6-147324-3
6-147323-4
6-147278-4 6-147324-4
6-147323-5
6-147278-5 6-147324-5
6-147323-6
6-147278-6 6-147324-6
6-147323-7
6-147278-7 6-147324-7
6-147323-8
6-147278-8 6-147324-8
6-147323-9
6-147278-9 6-147324-9
7-147323-0
7-147278-0 7-147324-0
7-147323-1
7-147278-1 7-147324-1
7-147323-2
7-147278-2 7-147324-2
7-147323-3
7-147278-3 7-147324-3
7-147323-4
7-147278-4 7-147324-4
251
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Headers, Vertical, Polarized/Latching, Surface Mount
E
.075
[1.90]
.025 Typ.
[0.62]
.535
[13.59]
.313
[7.62]
Material and Finish
MTE Headers
Housing — Black thermoplastic, 94V-0
rated
Posts — Brass, plated as follows:
Plating A — Duplex plated .000030
[.00076] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
Plating B — Duplex plated .000015
[.00038] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
Plating C — .000100 [.00254] tin
over .000050 [.00127] nickel on entire
post
.063
Position No. 1 Indicator [1.52]
A
.230
[5.84]
B
.025 Typ.
[0.64]
K
.100
[2.54]
.120
[3.05]
K
Pick and Place Cap
.200
[5.08]
Section K-K
.100 Typ.
[2.54]
.055±.003
[1.40±0.08]
+ .002
Ø .052 – .003
[1.32
.088±.003
[2.25±0.08]
]
+ 0.05
– 0.07
Plated Thru-Hole
Recommended
PC Board Layout
Ø .070±.002
[1.78±0.05]
(Refer to MTE Application Spec.
114-25026 for Stencil Aperature Layout
using .006 [0.152] or .008 [0.203]
stencil thickness
5
.113
[2.88]
C
.227
[5.76]
0.06
[1.53]
D
Position No. 1
Recommended PC Board Layout
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies (Polarized/
Latching) — pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
Note: All part numbers are RoHS
compliant.
Dimensions
No. of
Pos.
A
2
.300[7.62]
.220[5.59]
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
.400[10.16]
.500[12.70]
.600[15.24]
.700[17.78]
.800[20.32]
.900[22.86]
1.000[25.40]
1.100[27.94]
1.200[30.48]
1.300[33.02]
1.400[35.56]
1.500[38.10]
1.600[40.64]
1.700[43.18]
1.800[45.72]
1.900[48.26]
2.000[50.80]
2.100[53.34]
2.200[55.88]
2.300[58.42]
2.400[60.96]
2.500[63.50]
2.600[66.04]
.320[8.13]
.420[10.67]
.520[13.21]
.620[15.75]
.720[18.29]
.820[20.83]
.920[23.37]
1.020[25.91]
1.120[28.45]
1.220[30.99]
1.320[33.53]
1.420[36.07]
1.520[38.61]
1.620[41.15]
1.720[43.69]
1.820[46.23]
1.920[48.77]
2.020[51.31]
2.120[53.85]
2.220[56.39]
2.320[58.93]
2.420[61.47]
2.520[64.01]
B
C
Vertical SMT Headers
D
E
Plating A
.100[2.54]
.220[5.60]
Plating B
Plating C
.110[2.80]
5-1375583-1
5-1375582-1
5-1375549-1
.200[5.08]
.300[7.62]
.400[10.16]
.500[12.70]
.600[15.24]
.700[17.78]
.800[20.32]
.900[22.86]
1.000[25.40]
1.100[27.94]
1.200[30.48]
1.300[33.02]
1.400[35.56]
1.500[38.10]
1.600[40.64]
1.700[43.18]
1.800[45.72]
1.900[48.26]
2.000[50.80]
2.100[53.34]
2.200[55.88]
2.300[58.42]
2.400[60.96]
.320[8.14]
.420[10.68]
.520[13.22]
.620[15.76]
.720[18.30]
.820[20.84]
.920[23.38]
1.020[25.92]
1.120[28.46]
1.220[31.00]
1.320[33.54]
1.420[36.08]
1.520[38.62]
1.620[41.16]
1.720[43.70]
1.820[46.24]
1.920[48.78]
2.020[51.32]
2.120[53.86]
2.220[56.40]
2.320[58.94]
2.420[61.48]
2.520[64.02]
.160[4.07]
.210[5.34]
.260[6.61]
.310[7.88]
.360[9.15]
.410[10.42]
.460[11.69]
.510[12.96]
.560[14.23]
.610[15.50]
.660[16.77]
.710[18.04]
.760[19.31]
.810[20.58]
.860[21.85]
.910[23.12]
.960[24.39]
1.010[25.66]
1.060[26.93]
1.110[28.20]
1.160[29.47]
1.210[30.74]
1.260[32.01]
5-1375583-2
5-1375583-3
5-1375583-4
5-1375583-5
5-1375583-6
5-1375583-7
5-1375583-8
5-1375583-9
6-1375583-0
6-1375583-1
6-1375583-2
6-1375583-3
6-1375583-4
6-1375583-5
6-1375583-6
6-1375583-7
6-1375583-8
6-1375583-9
7-1375583-0
7-1375583-1
7-1375583-2
7-1375583-3
7-1375583-4
5-1375582-2
5-1375582-3
5-1375582-4
5-1375582-5
5-1375582-6
5-1375582-7
5-1375582-8
5-1375582-9
6-1375582-0
6-1375582-1
6-1375582-2
6-1375582-3
6-1375582-4
6-1375582-5
6-1375582-6
6-1375582-7
6-1375582-8
6-1375582-9
7-1375582-0
7-1375582-1
7-1375582-2
7-1375582-3
7-1375582-4
5-1375549-2
5-1375549-3
5-1375549-4
5-1375549-5
5-1375549-6
5-1375549-7
5-1375549-8
5-1375549-9
6-1375549-0
6-1375549-1
6-1375549-2
6-1375549-3
6-1375549-4
6-1375549-5
6-1375549-6
6-1375549-7
6-1375549-8
6-1375549-9
7-1375549-0
7-1375549-1
7-1375549-2
7-1375549-3
7-1375549-4
252
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Interchangeable Contacts, Wire Crimp (Snap-In)
Material and Finish
Short Point Receptacles
.068
[1.73]
Copper alloy C7025, plated as follows:
Plating A — Duplex plated .000030
[0.00076] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating B — Duplex plated .000015
[0.00038] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating C — .000100 [0.00254] min.
tin over .000050 [0.00127] min. nickel
on entire contact
.060
[1.52]
.460
[11.68]
C
Keying Plug
Part No. 104072-1
Ten plugs are supplied per strip.
Order quantity reflects the number
of strips required.
C
MTE Headers
.012
[0.30]
Gap
Section C - C
Extraction/Lance Reset
Tool No. 843477-1
Related Product Data
Performance Characteristics —
page 221
Housings used in —
Short Point—pages 223, 224
AMPMODU MTE Unloaded
Housings — pages 228-233
Application Tooling—
pages 270-272
Wire Size
Range
AWG
[mm2]
5
Technical Documents —
Ins.
Dia.
Range
32-28
0.03-0.08
.025-.060
0.64-1.52
26-22
0.13-0.3
.025-.060
0.64-1.52
24-20
0.2-0.5
.025-.060
0.64-1.52
pages 277, 278
Product Specification
108-1472, 108-1472-1
Application Specification
114-25038
Finish
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
Contact Part No.
(Standard Pressure)
Strip Form Loose Piece
1-104481-1
1-104481-0
5-104481-2
1-104480-3
1-104480-2
1-104480-7
1-104479-0
104479-9
104479-8
1-104481-3
1-104481-2
5-104481-6
1-104480-6
1-104480-5
1-104480-4
1-104479-3
1-104479-2
1-104479-1
Heavy Duty Miniature
Applicator for
AMP-O-LECTRIC
Machine*
Applicator for
AMP-O-MATIC
Stripper/Crimper
Machine
Hand
Tool
Nos.
567296-2
466980-1
91518-1
567297-2
466981-1
91518-1
567298-2
466982-1
91551-1
*For use with Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the Model “G” machines (shown
on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Note: These wire crimp contacts can be intermixed with insulation displacement crimp contacts.
Note: All part numbers are RoHS compliant.
253
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Interchangeable Contacts, Wire Crimp (Snap-In) (Continued)
Material and Finish
Pins
Phosphor bronze, plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000030
[0.00076] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000030
[0.00076] min. tin on solder area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
.025
[0.64]
.025
[0.64]
MTE Contacts
Extraction/Lance Reset
Tool No. 843477-1
.810
[20.57]
Related Product Data
Performance Characteristics —
page 221
AMPMODU MTE Unloaded
Housings — pages 228-233
Application Tooling —
pages 270-272
5
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
Wire Size
Range
AWG
[mm2]
Ins. Dia.
Range
32-28
0.03-0.08
.025-.054
0.64-1.37
26-22
0.14-0.32
.036-.054
0.91-1.37
Finish
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
Contact
Part No.
(Standard Pressure)
Strip
Loose
Form
Piece
5-104506-6
5-104506-7
5-104506-4
5-104506-5
5-104506-2
5-104506-3
5-104505-6
5-104505-7
5-104505-4
5-104505-5
5-104505-2
5-104505-3
Applicator for
Heavy Duty
Miniature Applicator AMP-O-MATIC
Stripper/
for AMP-O-LECTRIC
Crimper
Machine*
Machine
Hand
Tool
Nos.
—
—
58342-2
567239-2
466983-1
91531-1
*For use with AMP-O-LECTRIC Model “K” machines. Call Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Note: These wire crimp contacts can be intermixed with insulation displacement crimp contacts.
Note: All part numbers are RoHS compliant.
254
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MT and Shielded MT Interconnection System
Product Facts
Full line of mass
termination tooling offers
lowest installed cost for
most production needs
■
Dual cantilever beams with
anti-overstress features
provide redundant contact
of mating post and limit
beam deflection, preventing
permanent deformation
■
Redundant insulation
displacement slots provide
for maximum reliability
■
Integral wire strain relief
on contact can prevent wire
motion from being
transmitted to wire
termination areas
■
Built-in contact post stop
can protect terminated wire
from being disturbed by
over-insertion of mating
post, prevents wire from
entering contact area and
positively limits mating
connector depth
■
Cover styles include
low profile (polarized,
non-polarized, latching and
ejection) and standard
profile (hermaphroditic
and ejection)
Connector housings may
be stacked end-to-end
within one pair of covers.
All varieties of covers in
this catalog are suitable for
multiple housing stacking
applications similar to the
example illustrated in the
photograph to the right
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
R
Certified by Canadian
Standards
Association,
File No. LR 7189
5-102398-8 D-R Assembly
102537-8 Ejection Cover
102536-8 Back Cover
5-102398-8 D-R Assembly
102541-8 Non-Polarizing Cover
102536-8 Back Cover
102185-2 Latch
5-102398-8 D-R Assembly
102681-5 Latching Cover
102536-8 Back Cover
■
■
5-102398-8 D-R Assembly
102540-8 Polarizing Cover
102536-8 Back Cover
5102154-4 Header
Complete serviceability
with replacement contacts
■
Wire-to-Board
5-102398-8 D-R Assembly
102396-8 Hermaphroditic Covers
5-103168-8 Hdr
Insulation displacement
contacts and crimp,
snap-in contacts are
interchangeable
■
■
Typical Application of End-to-End Stacking
MT and Shielded MT
Interconnection System
■
R
5-103166-8 Header
5-103166-8 Header
5-102398-8 D-R Assembly
102396-8 Hermaphroditic Covers
The AMPMODU MT and
Shielded MT Interconnection
System offers labor and
cost savings through mass
termination technology,
while maintaining the timeproven reliability of the
AMPMODU product family.
The MT system is comprised
of preloaded, double-row
receptacle assemblies with
snap-on covers and a variety
of shielding hardware and
accessories. The system is
supported by a full line of
mass termination tooling to
meet virtually most production needs.
system, features a mating
interface that is the same as
the conventional AMPMODU
crimp, snap-in contact, featuring dual cantilever beams,
built-in overstress protection
and a completely enclosed
“box” design.
To reduce EMI/ESD (electromagnetic interference/
electrostatic discharge) at
the input-output interface,
add-on metal shields can be
used to convert standard
MT connectors to shielded
MT connectors.
5
Performance
Characteristics
Contact Current Rating —
3 amperes for single contact in free air.
(Amperage could vary due to ambient
temperature, wire size and duty cycles.)
Operating Temperature —
-65°C to +105°C
Termination Resistance —
12 milliohms max.
Max. Mating Force —
High pressure - 26 oz. [7.23 N]
Standard pressure - 9 oz. [2.50 N]
Min. Unmating Force —
High pressure — 5 oz. [1.39 N]
Standard pressure — 1.5 oz. [0.417 N]
Contact Retention in Housing —
5 lb. [22.24 N] per contact min.
The insulation displacement
contact, the heart of the MT
Note: All part numbers are RoHS compliant.
255
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
MT Receptacle Assemblies, Double-Row
.100 x .100 [2.54 x 2.54] Centerline
Housings Pre-loaded with
Standard Pressure Contacts
Contact
I.D. No.
1
1
1
1
1
.125
[3.18]
1
.600
[15.24]
.270
[6.86]
1
Circuit No. 1
Identifier
A Max.
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy, duplex
plated .000030 [0.00076] gold in mating
area, .000050 [0.00127] tin on solder
tail, with entire contact underplated
.000050 [0.00127] nickel
.070
[1.78]
.050
[1.27]
B
.100
Typ.
[2.54]
MT Receptacle Assemblies
Mateable Connectors — pages 117,
122, 126, 130, 264
Cable Insulation Wall
Thickness — .015 [0.39] max.
Cable Insulation Diameter —
.050 [1.27] max.
Mating Post Length —
.222-.273 [5.64-6.94] max.
Performance Characteristics —
page 255
Replacement Contacts — page 265
Connector Covers —
pages 258, 259
Application Tooling —
pages 273-275
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
MT Receptacle
Assembly
Right-Angle
Header
.300
[7.62]
.240
[6.10]
Related Product Data
5
.100
[2.54]
Dimensions
A
B
No. of
Pos.
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
40
50
60
64
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
2.000 [50.80]
2.500 [63.50]
3.000 [76.20]
3.200 [81.28]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
3.100 [78.74]
PC
Board
Part Nos. (Stamped)
Wire Size Range
30-26 AWG
26-22 AWG
[0.05-0.15 mm2]
[0.12-0.3 mm2]
5-102393-1
5-102398-1
5-102393-2
5-102398-2
5-102393-3
5-102398-3
5-102393-4
5-102398-4
5-102393-5
5-102398-5
5-102393-6
5-102398-6
5-102393-7
5-102398-7
5-102393-8
5-102398-8
5-102393-9
5-102398-9
6-102393-0
6-102398-0
6-102393-1
6-102398-1
6-102393-2
6-102398-2
6-102393-3
6-102398-3
6-102393-4
6-102398-4
6-102393-5
6-102398-5
6-102393-8
6-102398-8
7-102393-3
7-102398-3
7-102393-8
7-102398-8
8-102393-0
8-102398-0
.270
[6.86]
22-20 AWG
[0.3-0.6 mm2]
5-102448-1
5-102448-2
5-102448-3
5-102448-4
5-102448-5
5-102448-6
5-102448-7
5-102448-8
5-102448-9
6-102448-0
6-102448-1
6-102448-2
6-102448-3
6-102448-4
6-102448-5
6-102448-8
7-102448-3
7-102448-8
8-102448-0
Unloaded
Housings
102394-1
102394-2
102394-3
102394-4
102394-5
102394-6
102394-7
102394-8
102394-9
1-102394-0
1-102394-1
1-102394-2
1-102394-3
1-102394-4
1-102394-5
1-102394-8
2-102394-3
2-102394-8
3-102394-0
Note: Contact Extraction/Lance Reset Tool No. 843477-3, see page 265.
Keying Plugs
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Part No. 87077-2
(Plugs directly into housing)
Note: All part numbers are RoHS compliant.
256
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
MT Receptacle Assemblies, Double-Row
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Housings Pre-loaded with
High Pressure Contacts
Contact
I.D. No.
4
4
4
4
4
4
4
4
4
4
.125
[3.18]
.600
[15.24]
.270
[6.86]
1
Material and Finish
A Max.
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy, duplex
plated .000030 [0.00076] gold in mating
area, .000050 [0.00127] tin on solder
tails, with entire contact underplated
.000050 [0.00127] nickel
Circuit No. 1
Identifier
.050
[1.27]
Related Product Data
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
.300
[7.62]
.100
[2.54]
.100
Typ.
[2.54]
Dimensions
No. of
Pos.
6
8
10
12
14
16
18
20
A
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
B
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
30-26 AWG
[0.05-0.15 mm2]
5-102693-1
5-102693-2
5-102693-3
5-102693-4
5-102693-5
5-102693-6
5-102693-7
5-102693-8
PC
Board
MT Receptacle Assemblies
Mateable Connectors — pages 117,
122, 126, 130, 264
Cable Insulation Wall
Thickness — .015 [0.39] max.
Cable Insulation Diameter —
.050 [1.27] max.
Mating Post Length —
.200-.273 [5.64-6.94] max.
Performance Characteristics —
page 255
Replacement Contacts — page 265
Connector Covers —
pages 258, 259
Application Tooling —
pages 273-275
MT Receptacle
Assembly
Right-Angle
Header
.240
[6.10]
B
.270
[6.86]
Part Nos. (Stamped*)
Wire Size Range
26-22 AWG
[0.12-0.3 mm2]
5-102694-1
5-102694-2
5-102694-3
5-102694-4
5-102694-5
5-102694-6
5-102694-7
5-102694-8
5
22-20 AWG
[0.3-0.6 mm2]
5-102695-1
5-102695-2
5-102695-3
5-102695-4
5-102695-5
5-102695-6
5-102695-7
5-102695-8
*Cavity identification — first cavity (one side); Tyco Electronics Part No. and date code stamped on housing where size permits.
Note: Contact Extraction/Lance Reset Tool No. 843477-3, see page 265.
Keying Plugs
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Part No. 87077-2
(Plugs directly into housing)
Note: All part numbers are RoHS compliant.
257
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Low Profile Covers for Double-Row MT Receptacle Assemblies
Material
Front Covers
Black thermoplastic, flame retardant
A - Polarizing Cover
(Mates with AMPMODU 4-sided shrouded
headers. Refer to pages 117, 122, 126, 130.)
Related Product Data
For use on Double-Row MT Receptacle
Assemblies — pages 256, 257
B - Latching Cover
(Mates with AMPMODU 4-sided shrouded
headers with extraction slot. Refer to
pages 117, 122, 126, 130.)
.750
[19.05]
.750
[19.05]
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
L
MT Low Profile Covers
Note: See page 259 for Low Profile
Cover Part Nos.
L
C - Ejection Cover
(Mates with AMP-LATCH universal ejection
style pin headers equipped with latching
ears, Part No. 102185-2 (with push tabs)
or Part No. 102312-2 (without push tabs),
see Tyco Electronics Catalog 82012.
D - Non-Polarizing Cover
(Designed for use with shielded connectors,
pages 261 & 262; or for non-polarizing
applications.)
.750
[19.05]
Assembled*
.750
[19.05]
.480
[12.19]
.095
Typ.
[2.41]
5
.150
[3.81]
.468
[11.89]
*Dimension applies to cover when
installed on connector housing.
Back Covers
E - For Shielding and
Non-Shielding Applications
(For use with any low profile cover.)
L
F - For Shielding Applications
(For use with Non-Polarizing Cover only.)
L
Note: All part numbers are RoHS compliant.
258
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Standard Profile Covers for Double-Row MT Receptacle Assemblies
Material
Black thermoplastic, flame retardant
G - Hermaphroditic Cover
(Two hermaphroditic covers can be used or
one hermaphroditic cover can be used with
an H Ejection Cover.)
Related Product Data
1.120 Assembled*
[28.45]
For use on Double-Row MT Receptacle
Assemblies — pages 256, 257
.850
[21.59]
Technical Documents —
H - Ejection Cover
(Mates with AMP-LATCH universal ejection style
pin headers equipped with latching ears, Part No.
102185-2 (with push tabs) or Part No. 102312-2
(without push tabs), see Tyco Electronics Catalog
82012.
Top View
1.120
[28.45]
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
.095
[2.41]
Typ.
Bottom View
.150
[3.81]
*Dimension applies to cover when
installed on connector housing.
.468
[11.89]
MT Standard Profile Covers
L
Low Profile Covers
Front Covers
No. of
Pos.
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
40
50
60
64
Dimension
L
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
2.000 [50.80]
2.500 [63.50]
3.000 [76.20]
3.200 [81.28]
A
Polarizing
B
Latching
102540-1
102540-2
102540-3
102540-4
102540-5
102540-6
102540-7
102540-8
102540-9
1-102540-0
1-102540-1
1-102540-2
1-102540-3
—
—
—
—
—
—
—
—
—
102681-1
102681-2
102681-3
102681-4
102681-5
102681-6
102681-7
102681-8
102681-9
1-102681-0
1-102681-1
1-102681-2
1-102681-5
2-102681-0
—
—
Standard Profile Covers
Back Covers
C
Ejection
D
Non-Polarizing
102537-1
102537-2
102537-3
102537-4
102537-5
102537-6
102537-7
102537-8
102537-9
1-102537-0
1-102537-1
1-102537-2
1-102537-3
1-102537-4
1-102537-5
1-102537-8
2-102537-3
2-102537-8
3-102537-0
102541-1
102541-2
102541-3
102541-4
102541-5
102541-6
102541-7
102541-8
102541-9
1-102541-0
1-102541-1
1-102541-2
1-102541-3
1-102541-4
1-102541-5
1-102541-8
2-102541-3
2-102541-8
3-102541-0
E
Shielding and
Non-Shielding
Applications
102536-1
102536-2
102536-3
102536-4
102536-5
102536-6
102536-7
102536-8
102536-9
1-102536-0
1-102536-1
1-102536-2
1-102536-3
1-102536-4
1-102536-5
1-102536-8
2-102536-3
2-102536-8
3-102536-0
F
Shielding
Applications
—
—
—
102823-5
102823-6
102823-7
102823-1
102823-4
102823-8
102823-9
1-102823-0
1-102823-1
1-102823-2
1-102823-3
1-102823-4
102823-2
102823-3
—
—
G
Hermaphroditic
102396-1
102396-2
102396-3
102396-4
102396-5
102396-6
102396-7
102396-8
102396-9
1-102396-0
1-102396-1
1-102396-2
1-102396-3
1-102396-4
1-102396-5
1-102396-8
2-102396-3
2-102396-8
3-102396-0
H
Ejection
—
—
—
—
—
—
—
103268-6
—
103268-7
103268-8
—
103268-9
—
1-103268-0
—
1-103268-3
—
—
5
Note: All part numbers are RoHS compliant.
259
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Shielding Hardware and Accessories for MT Interconnection System
MT Shielding
Hardware and Accessories
Product Facts
■
Add-on shielding
accessories for existing
AMPMODU Standard MT
and PC board mounted
headers
■
Compact design
■
Tin plated copper alloy
material
■
Redundant cantilever
beams provide for good
peripheral contact,
eliminating the need for
a separate RF gasket
■
Polarized mating
■
360° cable braid
termination with cable
jacket support
■
Cable shielding hardware
permits molded cable
terminations after assembly
■
Must be used with braided
shielded cables
■
Solder tabs on right-angle
header shields are
self-retaining in a PC board
Shielded MT Receptacles
5
Shielded Right-Angle Headers
The shielded AMPMODU
MT system features add-on
metal shielding kits for
double-row standard MT
receptacle assemblies and
double-row right-angle
headers.
Cable shielding hardware
consists of a ferrule and two
stamped and formed shell
halves. The inner shell half
has a series of integral
cantilever beams to provide
good peripheral contact
with the mating outer shell
half. This feature also
eliminates the need for a
separate RF gasket.
Detents in the cantilever
beam provide a positive
lock when the two halves
are mated. During assembly
the inner and outer shell
halves are snapped
together over a terminated
standard MT connector.
Shields for right-angle
headers have integral
cantilever beams which
provide good contact with
the mating shielded MT
receptacle assembly,
without the use of a
separate RF gasket.
260
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Shielding Hardware and Accessories for
Double-Row MT Receptacle Assemblies
Two-Piece Shields—
Straight Exit
Outer Shell Half
Material and Finish
Shell Halves — Copper alloy, .020
[0.51] thick; pretinned .000030
[0.00076] min.
A
C
Related Product Data
Double-Row MT Receptacle
Assemblies — pages 256, 257
Non-Polarizing Covers (Part No.
Series 102541 with back cover
102536 or 102823) —
pages 258, 259
Shield Ferrules — page 263
B
.326
[8.28]
Ferrule Purchased
separately
(See page 263)
Technical Documents —
pages 277, 278
Flare braid over
assembled shells for
crimping under ferrule
Standard MT
Receptacle Assembly
Purchased separately
(Refer to pages 256 & 257)
MT Shielding
Hardware and Accessories
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
Inner Shell Half
5
No. of
Pos.
A
Dimensions
B
6
10
16
26
40
50
.410 [10.41]
.610 [15.49]
.910 [23.11]
1.410 [35.81]
2.110 [53.59]
2.610 [66.29]
.817 [20.75]
.817 [20.75]
.950 [24.13]
.950 [24.13]
1.325 [33.66]
.950 [24.13]
C
1.268 [32.21]
1.667 [42.34]
1.925 [48.90]
1.925 [48.90]
2.468 [62.69]
2.468 [62.69]
Part Nos.
Outer
Shell
102988-2
103137-2
103153-2
103341-2
104272-1
103158-2
Inner
Shell
102987-6
103136-2
103152-2
103340-2
104271-1
103157-2
Note: Match shield size to number of connector positions.
Note: All part numbers are RoHS compliant.
261
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Shielding Hardware and Accessories for
Double-Row MT Receptacle Assemblies (Continued)
Two-Piece Shields—
Right-Angle Exit
.125
Dia.
[3.18]
(See Note 2)
Material and Finish
C
Outer Shell Half
Shell Halves — Copper alloy, .020
[0.51] thick; pretinned .000030
[0.00076] min.
A
Related Product Data
Double-Row MT Receptacle
Assemblies — pages 256, 257
Non-Polarizing Covers (Part No.
Series 102541 with back cover
102536 or 102823) —
pages 258, 259
Shield Ferrules — page 263
B
Flare braid over
assembled shells for
crimping under ferrule
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
MT Shielding
Hardware and Accessories
.326
[8.28]
Ferrule Purchased
separately
(See page 263)
Standard MT
Receptacle Assembly
Purchased separately
(Refer to pages 256 & 257)
Inner Shell Half
5
No. of
Pos.
18
26
40
50
60
A
1.010 [25.65]
1.410 [35.81]
2.110 [53.59]
2.610 [66.29]
3.110 [78.99]
Dimensions
B
1.120 [28.45]
1.166 [29.62]
1.135 [28.83]
.983 [24.97]
1.118 [28.40]
C
1.413 [35.89]
1.975 [50.17]
2.633 [66.88]
3.133 [79.58]
3.606 [91.59]
Part Nos.
Outer Shell
Inner Shell
102784-2
102783-2
103139-2
103138-2
102786-2
102785-2
102788-2
102787-2
103141-2
103140-2
Notes: 1. Match shield size to number of connector positions.
2. Hole is provided in 26 through 60-position cable shields for application of optional cable tie pull ring after
assembly.
Note: All part numbers are RoHS compliant.
262
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Shielding Hardware and Accessories for
Double-Row MT Receptacle Assemblies (Continued)
Ferrules for Shielding Kits
Material and Finish
Soft copper, tin plated
Related Product Data
Used with Shielding Kits —
pages 261, 262
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
Application Tooling
6
Straight-Exit Shields
Outer
Inner
102988-2 102987-6
10
103137-2
103136-2
—
—
16
103153-2
103152-2
—
—
18
—
—
102784-2
102783-2
26
103341-2
103340-2
103139-2
103138-2
40
104272-1
104271-1
102786-2
102785-2
50
103158-2
103157-2
102788-2
102787-2
60
—
—
103141-2
103140-2
No. of
Pos.
Right-Angle Exit Shields
Outer
Inner
—
—
MT Shielding
Hardware and Accessories
AMP-O-LECTRIC Model
“G” Terminating Machine
Tyco Electronics Hand Tool 91410-1
(Die Set required, see table below)
Cable Dia.
Range
Ferrule
Part Number
0.200-0.250 [5.08-6.35]
0.250-0.300 [6.35-7.62]
0.310-0.360 [7.87-9.14]
0.370-0.420 [9.40-10.67]
0.190-0.240 [4.83-6.10]
0.250-0.300 [6.35-7.62]
0.310-0.360 [7.87-9.14]
0.370-0.420 [9.40-10.67]
0.190-0.240 [4.83-6.10]
0.250-0.300 [6.35-7.62]
0.310-0.360 [7.87-9.14]
0.370-0.420 [9.40-10.67]
0.320-0.370 [8.13-9.40]
0.430-0.460 [10.92-11.68]
0.320-0.370 [8.13-9.40]
0.430-0.460 [10.92-11.68]
0.380-0.420 [9.65-10.67]
0.430-0.460 [10.92-11.68]
0.470-0.520 [11.94-13.21]
0.470-0.520 [11.94-13.21]
0.500-0.545 [12.70-13.84]
0.550-0.600 [13.97-15.24]
102985-4
5-102903-2
5-102903-1
5-102789-1
5-102903-3
5-102903-2
5-102903-1
5-102789-1
5-102903-3
5-102903-2
5-102903-1
5-102903-1
5-102903-4
5-102789-2
5-102903-4
5-102789-2
5-102903-6
5-102903-5
5-102789-3
5-102903-8
5-102903-7
5-102789-4
Hand Tool Die Sets
Applicator Die*
Assembly Part No. Insulation
Braid
812665-2
1-527116-8
527116-4
812665-5
1-527116-6
527116-3
812665-4
1-527116-5
527116-3
812665-3
1-527116-4
527116-3
812665-6
1-527116-7
527116-3
812665-5
1-527116-6
527116-3
812665-4
1-527116-5
527116-3
812665-3
1-527116-4
527116-3
812665-6
1-527116-7
527116-3
812665-5
1-527116-6
527116-3
812665-4
1-527116-5
527116-3
812665-3
1-527116-4
527116-3
812665-9
1-527116-3
527116-2
812665-7
1-527116-1
527116-2
812665-9
1-527116-3
527116-2
812665-7
1-527116-1
527116-2
1-812665-5
1-527116-2
527116-1
1-812665-4
1-527116-1
527116-1
1-812665-3
1-527116-0
527116-1
1-812665-8
—
—
1-812665-7
—
—
1-812665-6
—
—
5
*For use with Model “K” machines. Call the Tyco Electronics Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC Model “G” machines (also shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Notes: 1. Ferrules are used with shielding kits shown on pages 261 & 262, and are purchased separately.
2. Individual anvils and crimpers also may be purchased separately.
3. Ferrule Part Number 1-102903-8 also requires Spacer Part Number 527116-9.
Note: All part numbers are RoHS compliant.
263
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Shielded MT Headers for use with Shielded MT Receptacle Assemblies
AMPMODU Right-Angle
Headers PC Board Mounted
.755
[19.18]
C
Material and Finish
Housing — Black thermoplastic,
flame retardant
Posts — Copper alloy, plated .000030
[0.00076] gold over .000050 [0.00127]
nickel on entire post
Shield — Copper alloy, .020 [0.51]
thick; pretinned .000030 [0.00076] min.
.460
[11.68]
Shield
Right-Angle
Header
B
.550
[13.97]
.125
[3.18]
Related Product Data
Mating Connectors — Double-Row
MT Receptacle Assemblies with
Shielding Hardware — pages 256-263
.434
[11.02]
.025
[0.64] Sq. Posts
.030
[0.76]
.290
[7.37]
A
Technical Documents —
pages 277, 278
MT Shielded Headers
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032.
Instruction Sheet
408-6532
.145±.003
[3.68±0.08]
2 Plc.
.145±.003
[3.68±0.08]
2 Plc.
A
A
.050±.003
[1.27±0.08]
5
.135
[3.43]
.318
[8.08]
.725
[18.45]
.550±.003
[13.97±0.08]
.100±.003
[2.54±0.08]
±.003
D [±0.08]
.040±.003
Dia.
[1.02±0.08]
(All holes)
±.003
D [±0.08]
±.003
2D [±0.08]
Recommended PC Board Hole Layout
for 6, 8 and 10 Positions
.100±.003
[2.54±0.08]
±.003
2D [±0.08]
Recommended PC Board Hole Layout
for 16 thru 50 Positions
D - Contact centerline is .100 [2.54]; ±.003 [0.08] tolerances
not to accumulate within one connector pattern.
No. of
Pos.
6
8
10
16
18
20
26
50
A
.200 [5.08]
.300 [7.62]
.400 [10.16]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.200 [30.48]
2.400 [60.96]
Dimensions
B
.430 [10.92]
.530 [13.46]
.630 [16.00]
.930 [23.62]
1.030 [26.16]
1.130 [28.70]
1.430 [36.32]
2.630 [66.80]
C
.510 [12.95]
.610 [15.49]
.710 [18.03]
1.010 [25.65]
1.110 [28.19]
1.210 [30.73]
1.510 [38.35]
2.710 [68.83]
Header
Part Nos.
102792-6
102792-8
102792-1
102792-7
102792-2
102792-5
102792-9
102792-4
Shield
Part Nos.
102991-1
102991-2
102791-2
102791-3
102791-4
1-102791-0
102791-1
102791-8
Note: All part numbers are RoHS compliant.
264
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Replacement MT Receptacle Contacts
Insulation Displacement
Contacts
Contact
Identification
Material and Finish
Copper alloy, duplex plated .000030
[0.00076] gold in mating area, .000100.000200 [0.00254-0.00508] tin in crimp
area, with entire contact underplated
.000050 [0.00127] nickel
.050
Max.
[1.27]
Insulation
Diameter
Related Product Data
Performance Characteristics —
page 255
Application Tooling —
pages 273-275
Technical Documents —
Wire Size Range
AWG
[mm2]
30-26
26-22
22-20
0.05-0.15
0.12-0.3
0.3-0.6
Standard Pressure
Receptacle
Contact Ident.
Part No.
1
5-102395-2
2
5-102399-1
3
5-102449-6
High Pressure
Receptacle
Contact Ident.
Part No.
4
5-102641-6
5
5-102642-6
—
—
Note: Termination tooling for MT receptacle insulation displacement contacts is shown on pages 273-275.
pages 277, 278
MT receptacle contacts
incorporate the following
features.
Cantilever
Beams
Antioverstress
Wide
Misalignment
Tolerance
The MT receptacle contact
cross-section is primarily
rectangular, with rounded
corners. Two integral
cantilever beams contact
the mating square male
posts. Deflection of these
spring members is limited
by anti-overstress and
excessive permanent
deformation is prevented.
This feature allows a wide
range for tolerance of
misalignment of mating
contacts.
The configuration of the
receptacle completely
encloses the spring
members helping to prevent
damage during handling
and assembly, and makes
the system compatible with
automatic application
techniques.
MT Contacts
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
5
Extraction/Lance Reset Tool
No. 843477-3
Note: All part numbers are RoHS compliant.
265
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mini-Tandem Spring Receptacle Housings and Contacts
Mini Tandem Spring
Housings and Contacts
Product Facts
■
Individual contacts mate
with .025 [0.64] sq. posts,
.125 [3.18] long
■
Crimp snap-in contacts
accept 32-22 AWG
[0.03-0.32 mm2] wire
■
Retention latch provides for
positive installation
■
No insertion tool required
■
High durability design
provides long life
■
Available with .000015
[0.00038] or .000030
[0.00076] thick gold inlay
in contact areas, or bright
tin plated
■
Closed-entry housings
■
Mini-contact box size:
.060 [1.52] sq.
■
Mini-Tandem Spring
Housings can be stacked
on .100 [2.54] centers in
either direction
■
Mini-Tandem
Spring Housings are
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
R
5
■
Certified by Canadian
Standards
Association,
File No. LR 7189
R
Mini-Tandem Spring
Receptacle Contacts are
designed to mate with .025
[0.64] posts. When used
individually, they will mate
with posts as short as .125
[3.18] and when used in a
housing, they will mate with
.140 [3.55] long posts.
These versatile contacts
may be used for
interconnecting posted
pc panels, I/O wiring and
cross-connecting pin
arrays.
Mini-Tandem Spring
Receptacle Contacts are
used in single- or doublerow housings with .100
[2.54] centerline spacing.
Single-row housings can be
converted into double-row
connectors on .100 x .200
[2.54 x 5.08] centers with
the use of stacking clips.
Specifications
Contact Current Rating —
3 amperes
Termination Resistance —
12 milliohms (max.) — gold plated
contacts
18 milliohms (max.) — tin plated
contacts
Durability — Ref. Product
Specification 108-25031
Mini-Tandem Spring
Housings can be stacked
side-by-side or end-to-end
on .100 [2.54] centers.
The receptacle contact's
box configuration provides
for long contact life with
controlled contact mating
forces which minimize wear.
An external retention spring
facilitates quick assembly
and provides firm seating in
a contact housing.
266
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mini-Tandem Spring Housings, Single-Row
.100 [2.54] Centerline
.550
[13.97]
.030
[0.76]
Material — Black glass-filled polyester, 94V-0 rated
.036
[0.91]
.066
[1.68]
Technical Documents —
pages 277, 278
.050
[1.27]
Product Specification
108-25031
Application Specification
114-25021
.100
[2.54]
.100
Max.
[2.54]
A Max.
B Spaces
@ .100 [2.54] = C
.050
[1.27]
Minimum mating post length is .140 [3.55].
Spring Housings
5
No. of
Pos.
2
4
8
12
16
18
20
22
A
.200 [5.08]
.400 [10.16]
.800 [20.32]
1.200 [30.48]
1.600 [40.64]
1.800 [45.72]
2.000 [50.80]
2.200 [55.88]
Dimensions
B
1
3
7
11
15
17
19
21
C
.100 [2.54]
.300 [7.62]
.700 [17.78]
1.100 [27.94]
1.500 [38.10]
1.700 [43.18]
1.900 [48.26]
2.100 [53.34]
Housing
Part No.
530554-1
530554-3
530554-7
1-530554-1
1-530554-5
1-530554-7
1-530554-9
2-530554-1
Note: Mini-Tandem Spring contacts for use in these housings are shown on page 269.
Material—Natural color nylon,
94V-2 rated
Keying Plug
Part No. 531226-1
(Plugs directly into housing)
Note: All part numbers are RoHS compliant.
267
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mini-Tandem Spring Housings, Double-Row
.100 [2.54] Centerline
.550
[13.97]
.030
[0.76]
.036
[0.91]
Material — Black glass-filled
polyester, 94V-0 rated*
.066
[1.68]
Technical Documents —
A Max.
pages 277, 278
Product Specification
108-25031
.200
[5.08]
Application Specification
114-25021
.100
[2.54]
B Spaces
@ .100 [2.54] = C
.050
[1.27]
.100
Max.
[2.54]
Mini-Tandem
Spring Contacts
Minimum mating post length is .140 [3.55].
5
Material — Natural color nylon,
94V-2 rated
No. of
Pos.
Keying Plug
Part No. 531226-1
(Plugs directly into housing)
*Consult Tyco Electronics for
specific UL recognition.
6
8
12
16
A
.300 [7.62]
.400 [10.16]
.600 [15.24]
.800 [20.32]
Dimensions
B
2
3
5
7
C
.200 [5.08]
.300 [7.62]
.500 [12.70]
.700 [17.78]
Housing
Part No.
530902-1
530902-6
2-530902-0
3-530902-0
Note: Mini-Tandem Spring contacts for use in these housings are shown on page 269.
Note: All part numbers are RoHS compliant.
268
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Mini-Tandem Spring Contacts
Receptacle Contacts
.060
[1.52]
Material and Finish
Phosphor bronze, plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold inlay on contact area, matte
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold inlay on contact area, matte
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Plating C — Duplex plated .000050
[0.00127] over matte tin in contact area,
over .000030 [0.00076] nickel on entire
contact
Plating D — .000100 [0.00254] min.
matte tin over .000030 [0.00076] nickel on
entire contact
Technical Documents —
.060
[1.52]
.085
Min.
[2.15]
Contact
Area with
Gold Inlay
Low Pressure Contacts
pages 277, 278
Wire Size Range
AWG
mm2
26-22
0.14-0.32
Ins. Dia.
Range
Finish
0.36-0.54
[0.64-1.37]
Plating A
Plating B
Contact Part No.
Strip Form Loose Piece
5531216-3
5531216-1
Miniature
Applicator for
Applicator for
AMP-O-MATIC
AMP-O-LECTRIC Stripper/Crimper
Machine*
Machine
5531216-4
5531216-2
466819-2
466943-1
Mini-Tandem
Spring Housings
Product Specification
108-25031
Application Specification
114-25021
Standard Pressure Contacts
Wire Size Range
AWG
mm2
Ins. Dia.
Range
32-28
0.03-0.08
.025-.054
[0.64-1.37]
26-22
0.14-0.32
.036-.054
[0.91-1.37]
Finish
Plating B
Plating C
Plating D
Plating B
Plating C
Plating D
Contact Part No.
Strip Form Loose Piece
530901-2
5530901-6
5530901-4
5530553-4
5530553-6
5530553-2
Miniature
Applicator for
Applicator for
AMP-O-MATIC
AMP-O-LECTRIC Stripper/Crimper
Machine*
Machine
530901-3
5530901-7
5530901-5
—
—
—
466723-1
466952-1
466819-2
466943-1
5
High Pressure Contacts
Wire Size Range
AWG
mm2
32-28
0.03-0.08
26-22
0.14-0.32
Contact Part No.
Strip Form Loose Piece
Miniature
Applicator for
Applicator for
AMP-O-MATIC
AMP-O-LECTRIC Stripper/Crimper
Machine*
Machine
Ins. Dia.
Range
Finish
.025-.054
[0.64-1.37]
.036-.054
[0.91-1.37]
Plating B
5531225-6
—
466723-1
466952-1
Plating B
5531224-6
—
466819-2
466943-1
*For use with AMP-O-LECTRIC Model “K” machines. Call the Tooling/Technical Assistance Center (1-800-522-6752)
for part nos. of applicators for use with the AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as
other bench machines and fully automatic AMPOMATOR lead making machines.
Notes: 1. Mini-Tandem Spring Receptacle Contacts are for use only in the housings shown on pages 267 & 268.
They cannot be used in AMPMODU Mod IV Housings.
2. Use Hand Tool No. 91540-1 for crimping loose-piece receptacles to all wire sizes listed above.
3. Application tooling is described on pages 270 & 275.
Note: All part numbers are RoHS compliant.
269
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Application Tooling for Wire Crimp Contacts
Tooling shown on this page
is designed to terminate
wire crimp contacts used in
various AMPMODU wire-toboard connectors. Refer to
page 88 to determine the
applicable connectors.
AMP-O-LECTRIC Model “G” Terminating Machine
(Shown with Optional Crimp Force Monitor)
A totally new design of our
most popular machine for
bench-top operation. It
features a quiet and reliable
direct motor drive, electronic
controls for easy setup and
operation, and improved
guarding and lighting for
operator convenience and
safety. All versions include
either manual or automatic
precision adjustment for
crimp height.
For further details, request
Tyco Electronics Catalog
65828.
Application Tooling
AMP-O-MATIC Stripper/Crimper Machine
Applicators
Several terminating
machines, including the
AMP-O-LECTRIC Model “G”,
AMP-O-MATIC Stripper/
Crimper and AMPOMATOR
CLS machines, are
designed for use with
interchangeable
applicators. Basic styles are
quickly interchangeable to
minimize costly downtimes,
and feature dial-in wire and
insulation crimp height
settings. Special applicators
are available for use with
the Crimp Force Monitor
(see page 272), for
measuring the crimp height
of each termination as it is
made, plus evaluating the
quality of each crimp.
5
This machine automatically
strips as well as terminates
individual wires. Similar to
the AMP-O-LECTRIC Model
“G” machine, applicators
are quickly interchangeable,
and it includes precision
adjustment for crimp height.
All adjustments can be made
from the front of the machine,
without special tools.
For further details, request
Tyco Electronics Catalog
65004.
EDGE, Electronic Applicator
Counter
The new versatile EDGE
applicator counter tracks
wearable tool usage for the
most effective maintenance
planning. The completely
electronic counter with clear
LCD display, indicates
cycles since installation.
By performing maintenance
at measured intervals with
pre-set limits, operators
avoid breakdowns and
rejects caused by tool wear
or mid-adjustment. For more
information, request catalog
1773385.
Heavy Duty Miniature
Applicators
270
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Application Tooling for Wire Crimp Contacts (Continued)
AMP 3K/40 and AMP 5K/40
Terminators
As a value oriented
terminator, the AMP 3K/40
and AMP 5K/40 are
designed for customers
that require the increased
output and quality of a
semiautomatic machine at
a competitive price. By
incorporating the most
commonly requested
features as standard and
offering a long list of
optional equipment, these
terminators offer flexibility to
meet the specific needs of
various applications at the
lowest possible cost.
AMP 5K/40 Terminator
Application Tooling
Optional Stripping Module for
the AMP 3K/40, AMP 5K/40 and
the AMP-O-LECTRIC Model G
The combination of the
Stripping Module with the
AMP-O-LECTRIC Model G
Terminator or the AMP
3K/40, 5K/40 provides an
economical, proficient
method of stripping wire
and crimping terminals on
the same machine. Wires
are stripped moments
before crimping, meaning
there is virtually no chance
of damaging wire
conductors during handling
or storage. Once the wire is
fed into the start sensor, the
Stripping Module does the
rest, improving placement
accuracy. For more
information, request catalog
1309085.
5
271
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Application Tooling for Wire Crimp Contacts (Continued)
Tooling shown on this page
is designed to terminate
wire crimp contacts used in
various AMPMODU wire-toboard connectors. Refer to
page 88 to determine the
applicable connectors.
AMPOMATOR System III Leadmaker
The AMPOMATOR
System III is an automatic
machine for the production
of terminated wire leads.
The machine combines
state of the art technology
to process single and
double wire application
utilizing the wire processing
industry’s best and most
friendly subsystems and
accessories available to
meet the latest market
requirements for wire lead
production.
Crimp Force Monitor (CFM)
Application Tooling
Your quality program calls
for more than a good
crimping system. It
demands proof - the proof
you get with the SLE Crimp
Force Monitor. It has highresolution piezo-quartz
sensor technology for a
more precise identification
of typical crimping faults.
The monitor features Zone &
Peak Force Analysis,
128x128 Dot Matrix, Force
Trigger and Encoder
Proximity Trigger, and
Absolute Force
Measurement for real-time
monitoring of every crimp.
The CFM can be used with
bench or fully-automatic
machines. Special
applicators are not required.
5
Sure, you can sample and
test crimp height with a
micrometer. In fact, that’s
how you standardize your
process. But for ongoing
quality control, testing every
crimp, SLE is the choice. It’s
known worldwide, and
meets our standards for a
high performance
terminating system. That’s
how you can be sure.
High quality crimping - with
verification - means higher
production and productivity.
The new machine
incorporates a servo-driven,
software-controlled
AMP-O-LECTRIC ST III
terminator and the next
generation System III
Applicator.
See catalog 1654956-5 for
more information.
Commercial PRO-CRIMPER III
Hand Tool
Commercial grade hand
tool for crimping various
products. Features ratchet
control to provide complete
crimp cycle. Accepts both
pinned- and shoulderedstyle die sets. Locators are
provided with pinned-style
die sets for proper contact
and wire positioning, and to
help minimize contact rotation and bending during
crimping. Approximate
weight 1.3 lb [0.60 kg].
Premium CERTI-CRIMP Straight
Action Hand Tool (SAHT)
Tyco Electronics hand
tools are ideal for small
production and prototype
applications. They feature
ratchet control to help eliminate partial crimps, straightline die closure, terminal
locator and support, and
insulation crimp adjustment.
Tyco Electronics hand tools
also can be adapted for
use with pneumatic tooling
assemblies, providing air
operated crimping
capabilities.
For further details on
Tyco Electronics straight
action hand tools, request
Tyco Electronics Catalog
65780. For more details on
Tyco Electronics pneumatic
tooling assemblies, call
the Tyco Electronics
Technical Support Center,
1-800-522-6752.
272
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Application Tooling for Insulation Displacement Crimp (IDC)
Contacts and Connectors
Tooling shown on this page
is designed to terminate
IDC contacts for various
AMPMODU wire-to-board
connectors. Refer to page
88 to determine the applicable connectors.
Pistol Grip Manual and
Air Powered Tools
The manual pistol grip tool
features an interchangeable modular terminating
head which also can be
used in the pneumatic version, the Bench Mount
Pneumatic Power Assembly
and the IDC Electric Power
Unit. The head terminates
one unstripped wire per
cycle and indexes the connector to the next terminating position. The head
rotates to permit optimum
access to the wiring area.
Manual Pistol Grip
Tool No. 58074-1
Pneumatic Pistol Grip
Tool No. 58075-1
The Bench Mount Pneumatic
Power Assembly is air actuated with either a foot or
knee switch. This capability
frees the operator’s hands
for optimum positioning.
Application Tooling
Modular Heads:
58062-1 (for MT connectors)
58336-1 (for MTE connectors)
58395-1 (for Level V IDC connectors)
58540-1 (for MTE connectors, discrete
wire or flat ribbon cable)
Bench Mounted Pneumatic Power Assembly
No. 58338-1
Modular Head
Tool No. 58540-1
IDC Electric Power Unit
No. 931800-1
IDC Electric Power Unit
This electrically powered
semiautomatic bench
machine is designed for
applying AMPMODU MTE
and MT connectors to discrete wires. It is portable
and compact and uses
existing pistol grip modular
heads. The heads are easily
interchanged to run different
products. *The IDC Electric
Power Unit’s cycle rate is
approximately 7,200 cycles
per hour, with exact production rates depending upon
operator dexterity.
5
Modular Heads:
58062-1 (for MT connectors)
58336-1 (for MTE connectors)
This modular head tool can
be used on any pistol grip
tool. It was designed for discrete wire or flat ribbon cable
applications.
*A tube-fed track assembly, Part No.
856675-1, also can be used with
MTE Connectors.
Note: All part numbers are RoHS compliant.
273
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Application Tooling for Insulation Displacement Crimp (IDC)
Contacts and Connectors (Continued)
Tooling shown on this page
is designed to terminate
IDC contacts for various
AMPMODU wire-to-board
connectors. Refer to page
88 to determine the applicable connectors.
Tube-Fed Ribbon Cable Machine
Tube-Fed Ribbon Cable Machine No. 856002-1
Application Tooling
Designed for bench applications, this machine is
pneumatically operated and
controlled by a foot pedal. It
terminates connectors onto
end-notched ribbon cable.
*The connectors are supplied in strip form and in
plastic tubes. The machine
consists of three basic subassemblies: a feed track, a
terminating station and a
seating station. The feed
track is a constant force,
spring-driven unit which
conveys connectors
through the product tube to
the terminating station. The
air-operated terminating station positions and terminates contacts onto the
notched cable. The seating
station is manually operated
and seats connector housings onto the terminated
contacts.
*At a rate of 13-25 positions at a time.
5
2700 lb. Power Unit With
Cable Notching Die
Equipped with a cable
notching die an adapter kit,
this fully pneumatic bench
machine provides the 2700 lb
[12 010N] force required for
end-notching ribbon cable.
It features a grooved cable
support plate, a pressure
plate and a cable stop to
facilitate cable alignment
and positioning during the
notching process.
Notching Dies:
854449-1 (for 24-22 AWG
[0.2-0.6 mm2] Wire
854449-2 (for 28-26 AWG
[0.08-0.15 mm2] Wire
2700 lb. Power Unit
No. 312522-1
Note: All part numbers are RoHS compliant.
274
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Application Tooling for Insulation Displacement Crimp (IDC)
Contacts and Connectors (Continued)
Tooling shown on this page
is designed to terminate
IDC contacts for various
AMPMODU wire-to-board
connectors. Refer to page
88 to determine the applicable connectors.
CHAMPOMATOR Model 2.5 Terminating Machine No. 354786-(*)
This compact bench
machine terminates wires
manually sorted from
multiconductor cables.
Termination sequence may
include full termination of all
contacts, or selective termination. Designed for easy
programming, the machine
is microprocessor controlled
and programmed by a
membrane switch keyboard. It also has an internal storage capability for
retaining up to 350 cable
assemblies. Connectors
can be terminated with
either straight or right-angle
wire dress.
*For applicable dash nos.,
call the Technical Support
Center: 1-800-522-6752.
For further details, request
Tyco Electronics Catalog
82247
Application Tooling
CHAMPOMATOR Model 3A Terminating Machine No. 761420-(*)
5
This floor model machine
automatically sorts wires
from multiconductor jacketed cable and terminates
them in a user-determined
sequence; either full termination of all contacts, or selective termination. Designed
for easy programming, the
machine is microprocessor
controlled and programmed
by a touchscreen. It also has
an internal storage capability
for retaining up to 50 cable
assemblies. Connectors can
be terminated with either
straight or right- angle wire
dress. All cable assemblies
are tested for continuity and
shorts.
*For applicable dash nos.,
call the Technical Support
Center: 1-800-522-6752.
For further details, request
Tyco Electronics Catalog
82247
Note: All part numbers are RoHS compliant.
275
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Technical Documents for Board-to-Board Products
Technical Documents
Various technical documents
are available for your use.
Product Specifications describe technical performance characteristics and verification tests.
They are intended for the Design, Component and Quality Engineers.
PC/104 and PC/104-Plus Connectors — Pages 5-12:
108-1956
PC/104 and PC/104-Plus Connector Systems
Receptacle Assemblies and Unshrouded Breakaway Headers, Surface-Mount — Pages 109, 110, 185-192:
108-25017 AMPMODU Interconnection System, Two-Piece
108-25022 AMPMODU Mod. IV Interconnection System, Vertical Assemblies
108-25026 AMPMODU Mod. II Interconnection System, Standard Pressure Receptacle
Assembly and Header
Two-Piece Printed Circuit Board Connectors — Pages 193-202:
108-16
ACTION PIN Contacts
108-25017 AMPMODU Interconnection System, Two-Piece
108-25027 AMPMODU Mod. II Interconnection System, Short-Point Receptacle Assembly
and Header
Receptacle Assemblies, Horizontal and Vertical Board Mount — Pages 168-192:
108-25022 AMPMODU Mod. IV Interconnection System, Vertical Assemblies
108-25026 AMPMODU Mod. II Interconnection System, Standard Pressure Receptacle
Assembly and Header
108-25027 AMPMODU Mod. II Interconnection System, Short-Point Receptacle Assembly
and Header
.025 [0.64] Square Posts, Headers, Accessories and Tooling — Pages 92-105, 114-140, 145-153, 163:
108-16
ACTION PIN Contacts
108-25026 AMPMODU Mod. II Interconnection System, Standard Pressure Receptacle
Assembly and Header
Application Specifications describe requirements for using the product in its intended application,
and/or crimping information. They are intended for the Packaging and Design Engineers and the
Setup person.
PC/104 and PC/104-Plus Connectors — Pages 5-12:
114-13021 PC/104 and PC/104-Plus Connectors
Two-Piece Printed Circuit Board Connectors — Pages 193-202:
114-9009
AMPMODU Header, Two-Piece, Double Row, Application of
Receptacle Assemblies, Horizontal and Vertical Board Mount — Pages 168-192:
114-25018 AMPMODU Mod. II and IV Receptacle Assembly, PC Board Mounted, Vertical,
Application of
.025 [0.64] Square Posts, Headers, Accessories and Tooling — Pages 92-105, 114-140, 145-153, 163-167:
114-25028 ACTION PIN Contacts with Tyco Electronics Headers, Application
114-13011 AMPMODU .025 and .045 Square Continuous Posts
5
Instruction Sheets provide instructions for assembling or applying the product. They are intended
for the Manufacturing Assembler or Operator.
PC/104 and PC/104-Plus Connectors — Pages 5-12:
408-8502
Future Board Assembly 1424685 for PC/104 and PC/104-Plus Connectors
408-8503
Seating Tool Assembly 1424686 for PC/104 and PC/104-Plus Connectors
408-8504
Pneumatic Seating Tool Assembly 1424930-1 for PC/104 and PC/104-Plus
Connectors
408-8505
Manual Seating Tool Assembly 1424931-1 for PC/104 and PC/104-Plus Connectors
Two-Piece Printed Circuit Board Connectors — Pages 193-202:
408-2636
ACTION PIN Contact Rear Insertion/Extraction Tool 265871-7
408-9054
Seating Tools
Receptacle Assemblies, Horizontal and Vertical Board Mount — Pages 168-192:
408-7411
Suggestions for Wave Soldering Vertical AMPMODU Receptacles
.025 [0.64] Square Posts, Headers, Accessories and Tooling — Pages 92-105, 114-140, 145-153, 163:
408-2636
ACTION PIN Contact Rear Insertion/Extraction Tool 265871-7
408-6944
Tyco Electronics Uninsulated Bandolier Post Insertion Tool 91419-1
408-7977
AMPMODU Double Row, Straight Posts, End Shrouds .100 x .100 [0.64 x 0.64] Centers
408-7878
AMPMODU Header Barrier Inserts
408-9054
ACTION PIN Contact Headers Seating Tool, 91170 Series
408-9707
Tool Kit 314818-1 for Breakaway Headers
Note: All part numbers are RoHS
compliant.
Handbook
5697
Guide to Application of ACTION PIN Contact Connectors
276
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Technical Documents for Wire-to-Board Products
Various technical documents
are available for your use.
Product Specifications describe technical performance characteristics and verification tests.
They are intended for the Design, Component and Quality Engineers.
Locking Clip Contacts and Housings — Pages 206-209:
108-36028 Connector, Locking Clip, .025 [0.64] Square, Gold
108-36028-1 Connector, Locking Clip, .025 [0.64] Square, Tin
Mod. IV Wire-Applied Contacts and Housings — Pages 210-220:
108-25007 AMPMODU Mod. V Interconnection System, Wire-Applied (High Pressure)
108-25019 AMPMODU Mod. IV Male Connectors
108-25020 AMPMODU Mod. IV Interconnection System, (Standard Pressure)
108-25021 AMPMODU Mod. IV.V Interconnection System, (Intermediate Pressure)
Short-Point Wire-Applied Contacts and Housings — Pages 221-224:
108-1472
Short-Point Contacts and Housings
AMPMODU MTE Interconnection System — Pages 225-252:
108-25034 AMPMODU MTE Connectors
AMPMODU MT and Shielded MT Interconnection System — Pages 255-265:
108-25015 AMPMODU MT Standard Pressure Connectors
108-25018 AMPMODU MT High Pressure Connectors
108-25030 AMPMODU MT Shielding Accessories
AMPMODU Level V, IDC Connectors —
108-25028 Interconnection System, Insulation Displacement Connector, IDC Level
Technical Documents
Mini-Tandem Spring Receptacle Contacts — Pages 266-269:
108-25031 Tandem Spring Receptacle Contact
Application Specifications describe requirements for using the product in its intended application,
and/or crimping information. They are intended for the Packaging and Design Engineers and the
Setup person.
Locking Clip Contacts and Housings — Pages 206-209:
114-25006 Contact, Locking Clip, .025 [0.64] Square, Application of
5
Mod. IV Wire-Applied Contacts and Housings — Pages 210-220:
114-25003 AMPMODU Mod. IV (Standard Pressure), AMPMODU Mod. IV.V (Intermediate
Pressure) and AMPMODU Mod. V (High Pressure) Receptacle Contacts,
Application of
114-25016 AMPMODU Mod. IV Crimp Pin Contact
Short-Point Wire-Applied Contacts and Housings — Pages 221-224:
114-25038 Short-Point Contacts and Housings
AMPMODU MTE Interconnection System — Pages 225-252:
114-25026 AMPMODU MTE Interconnection System
AMPMODU MT and Shielded MT Interconnection System — Pages 255-265:
114-25032 AMPMODU MT Interconnection System and Shielding Accessories,
Application of
AMPMODU Level V, IDC Connectors —
114-25020 Interconnection System, IDC Level V, Application of
Mini-Tandem Spring Receptacle Contacts — Pages 266-269:
114-25021 Tandem Spring Receptacle Contact, Application of
Note: All part numbers are RoHS compliant.
277
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Technical Documents for Wire-to-Board Products (Continued)
Instruction Sheets provide instructions for assembling or applying the product. They are intended
for the Manufacturing Assembler or Operator.
Locking Clip Contacts and Housings — Pages 206-209:
408-7604
Tyco Electronics Extraction Tool 91084-1
408-7606
Tyco Electronics Locking Clip Contacts and Connectors
408-7627
Tyco Electronics Hand Crimp Tool 90295-1, 28-30 AWG Wire
408-8547
Tyco Electronics Hand Crimp Tool 91533-1, 22-26 AWG Wire
408-9388
Tyco Electronics Hand Crimp Tool 90431-1, 20 AWG Wire
Mod. IV Wire-Applied Contacts and Housings — Pages 210-220:
408-4379
Tyco Electronics PRO-CRIMPER II Hand Tool
408-7935
AMPMODU Receptacle Connectors with Strain Relief/Pull Tabs
408-8547
Tyco Electronics Hand Tool 91516-1, 91517-1 and 91541-1
408-9451
Tyco Electronics Extraction Tool 843473-1 for AMPMODU Wire-Applied Housings
86308
408-9453
Tyco Electronics Extraction Tools 843996 and 843477 for Removing AMPMODU
Crimp Snap-In Receptacle Contacts from Wire-Applied Housings
Technical Documents
AMPMODU MTE Interconnection System — Pages 225-252:
409-5746
Tyco Electronics Electric Power Unit 931800-1
409-5832
MTE Ribbon Cable Terminator 856002-1
408-6789
Tyco Electronics Pneumatic Pistol Handle 58075-1
408-6790
Tyco Electronics Manual Pistol Handle 58074-1
408-6919
AMPMODU MTE Connectors
408-8547
Tyco Electronics Hand Crimp Tool 91518-1 and 91551-1
408-9230
Tyco Electronics Keying Tool 91417-1
408-9359
MTE Modular Terminating Head 58336-1
408-9393
Tyco Electronics Pneumatic Bench Assy. 58338-1
408-9407
Tyco Electronics Hand Crimp Tool 91531-1 and 58342-2
408-9453
Tyco Electronics Extraction Tools 843996 and 843477 for Removing AMPMODU
Crimp Snap-In Receptacle Contacts from Wire-Applied Housings
408-9515
Ribbon Cable Notcher 854449-[]
AMPMODU MT and Shielded MT Interconnection System — Pages 255-265:
408-6532
AMPMODU MT Connectors
5
AMPMODU Level V, IDC Connectors —
408-6843
Tyco Electronics Extraction Tool 91409-1
Standard Tandem Spring and Mini-Tandem Spring Receptacle Contacts — Pages 266-269:
408-7909
Tyco Electronics Hand Crimping Tool 91540-1
Note: All part numbers are RoHS compliant.
278
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
工商网监
湘ICP备2023018690号
