4234514002

MT2000 HDPE HEAT SHRINK TUBING APPLICATIONS PROFILE • Abrasion protection for electrosurgical devices • Shrink ratio < _ 2.5:1 • High performance insulation for electrosurgical devices • Full recovery at 140°C (284°F) minimum • Supports sterilization environments: gamma and ethylene oxide (ETO) • ISO 10993 biocompatibility tested • PFAS-free • Registered with the FDA: MAF-727 • Custom sizing, colors, finishing and value-add options available ABOUT • MT2000 is a crosslinked high density polyethylene (HDPE) heat shrink tubing and offers excellent abrasion protection and high performance insulation • Its homogeneous structure (properties evenly distributed) contributes to its consistency and high performance, making our MT2000 essentially free from flaws, defects, pinholes, seams, cracks or inclusions • MT2000 is semi-rigid and mechanically tough, with high insulating properties, making our MT2000 a great option for electrosurgical device applications protection for rigid laparoscopic and in-vivo instruments MEDICAL / HEAT SHRINK TUBING — MT2000 HDPE HEAT SHRINK TUBING — MT2000 TABLE 1: DIMENSIONS As Supplied Standard Sizes Recovered Inside Diameter Minimum (D) Inside Diameter Maximum (d) Wall Thickness (W) Minimum Maximum Normal Size in. mm. in. mm. in. mm. in. mm. in. mm. 1mm .040 1.0 .018 0.45 .008 0.20 0.12 0.30 .010 0.25 2mm .080 2.0 .032 0.80 .008 0.20 0.12 0.30 .010 0.25 3mm .120 3.0 .048 1.20 .008 0.20 0.12 0.30 .010 0.25 6mm .240 6.0 .096 2.4 .008 0.20 0.12 0.30 .010 0.25 10mm .400 10.0 .160 4.0 .012 0.30 0.16 0.41 .014 0.36 TABLE 2: PROPERTIES Property Unit Requirement Test Method Physical Dimensions* inches (mm) In accordance with Table 1 Longitudinal change* percent +0, -10 maximum ASTM D 2671 Concentricity as supplied* percent 60 minimum ASTM D 2671 psi (MPa) 3000 minimum (20.7) percent 200 minimum psi (MPa) 5.0 x 104 minimum (344) percent 200 minimum Tensile strength* Ultimate elongation* Secant modulus* (expanded) ASTM D 2671, 20”/minute ASTM D 2671 Heat resistance 168 hours at 250 ± 5°C (482°F) Followed by test for: Ultimate elongation ASTM D 2671, 20”/minute Electrical Dielectric strength Dielectric withstand 3000V, 60Hz volts/mil (kV/mm) sec 1000 minimum (39.36) ASTM D 2671 60 minimum ASTM D 2671 Chemical Fluid resistance 24 hours at 23 ± 3°C (73 ± 5°F) Isopropyl alcohol 5% saline solution Disinfectant Followed by tests for: Dielectric strength Tensile strength Heavy metals analysis Cadmium, Mercury, Lead, Bismuth, Antimony ASTM D 2671 kV/mm 1000 minimum (39.36) psi (MPa) 3000 minimum (20.7) ASTM D 2671 ppm 1 maximum (total of all metals) USP XXII Physiochemical tests-plastic (Note 1) *Denotes lot acceptance testNote 1: Sample preparation and extraction is per USP XXII. Metals analysis may be colorimetric as described in USP XXII or by equivalent quantitative analytical method. TE.com/medical TE Connectivity, TE connectivity (logo), Raychem and TE are trademarks owned or licensed by the TE Connectivity Ltd. family of companies. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. © 2024 TE Connectivity. All Rights Reserved. 07/24 med-mt-2000-hst-ss-en MEDICAL / HEAT SHRINK TUBING — MT2000 HDPE