427243N001

SPECIFICATION CONTROL DRAWING Product Name Boeing Number BACS 13CT SO63-1-9036-22 SO63-1-9036-20 SO63-1-9036-18 SO63-2-9036-22 SO63-2-9036-20 SO63-2-9036-18 SO63-3-9036-22 SO63-3-9036-20 SO63-3-9036-18 SO63-4-9036-22 SO63-4-9036-20 SO63-4-9036-18 SO63-5-9036-22 SO63-5-9036-20 SO63-5-9036-18 BACS13CT-1A BACS13CT-1C BACS13CT-1D BACS13CT-2A BACS13CT-2C BACS13CT-2D BACS13CT-3A BACS13CT-3C BACS13CT-3D BACS13CT-4A BACS13CT-4C BACS13CT-4D BACS13CT-5A BACS13CT-5C BACS13CT-5D A±1.75 [A±0.070] Product Dimensions øB min øC min SO631R 16.50 [0.650] 1.90 [0.075] 2.65 [0.105] SO632R 16.50 [0.650] 2.65 [0.105] 3.55 [0.145] SO633R 16.50 [0.650] 4.30 [0.170] 5.00 [0.200] SO634R 19.10 [0.750] 5.95 [0.235] 6.50 [0.255] SO635R 19.10 [0.750] 7.00 [0.275] 7.60 [0.300] Mark MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. Marked per table. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR RING: SOLDER: TYPE Sn63 per ANSI / J-STD-006. FLUX: TYPE ROL1 per ANSI / J STD-004. TERMAL INDICATOR RING: Fusible alloy with melt point of 221°C. 3. MELTABLE RINGS: Environment resistant fluorocarbon-based thermoplastic 4. PRE-INSTALLED LEAD: Raychem 55PC6121-GA. “GA”=size (AWG) of lead, color: white with 2 black stripes. APPLICATION 1. These parts are designed to provide an environment resistant shield termination on cables, rated for 125°C min. having tin or silver-plated shields, and jackets compatible with the insert material. See M83519/2 or consult Raychem. 2. These parts conform to Boeing Aircraft Company specification BACS13CT. When properly installed, they will meet the performance requirements of Raychem RT-1404 and SAE-AS-83519/2. 3. Part selection: Measure cable jacket diameter at its maximum point. Select the smallest terminator that has a “B” diameter larger than the cable diameter. 4. Cable is to be stripped to expose 6.0 -7.5mm [0.235-0.295] of shield. 5. Part may be installed using any Raychem approved convection or infra-red heating tool. Tools must be equipped with a suitable reflector. For detailed assembly instruction see Raychem RCPS-100-70. Tyco Electronics Corporation 300 Constitution Drive, Menlo Park, CA. 94025, U.S.A. TITLE: Raychem Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A PREPARED BY: Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their ROUGHNESS IN application. MICRON DCR NUMBER: REPLACES: SOLDERSLEEVE DEVICE WITH PRE-INSTALLED LEAD, IMMERSION RESISTANT DOCUMENT NO.: SO63-X-9036-GA ANGLES: N/A REV.: DATE: A CAGE CODE : 1-Aug-06 SCALE: SIZE: SHEET: mforonda D060206 D050444 06090 --A 1 of 1 © 2005 - 2006 Tyco Electronics Corporation. All rights reserved. SolderSleeve is a trademark of Tyco Electronics Corporation If this document is printed it becomes uncontrolled. Check for the latest revision.