43A-015A

13 and 43 Standard 13 43  PC Board Mountable Pressure Sensor  0-100 mV Output  Current Excitation  Gage and Absolute  Temperature Compensated DESCRIPTION The 13 and 43 are temperature compensated, piezoresistive silicon pressure sensors packaged in a TO-8 configuration. It provides excellent performance and long-term stability. Gage and absolute pressure ranges from 0-2 to 0-250 psi are available. Integral temperature compensation is provided over a range of 0-50°C using laser-trimmed resistors. An additional laser-trimmed resistor is included to normalize pressure sensitivity variations by programming the gain of an external differential amplifier. This provides sensitivity interchangeability of ±1%. Please refer to the 13 and 43 1 psi datasheets for low pressure applications. FEATURES      APPLICATIONS       TO-8 Package 0ºC to 50ºC Compensated Temperature Range ±0.1% Non Linearity 1.0% Interchangeable Span (provided by gain set resistor) Solid State Reliability Medical Instruments Process Control Factory Automation Altitude Measurement Vacuum Measurement Handheld Calibrators STANDARD RANGES Range psig 0 to 2  psia 0 to 5   0 to 10   0 to 15   0 to 30   0 to 50   0 to 100   0 to 250   13and43_Standard www.meas-spec.com 1/4 June 2011 13 and 43 Standard PERFORMANCE SPECIFICATIONS Supply Current: 1.5mA Ambient Temperature: 25°C (unless otherwise specified) PARAMETERS MIN TYP MAX UNITS NOTES Span 75 100 150 mV 1 Span (2 psi version) 30 60 mV 1 Zero Pressure Output -2 2 mV Pressure Non Linearity -0.1 ±0.05 0.1 %Span Pressure Hysteresis -0.05 ±0.01 0.05 %Span 2 Input & Output Resistance 2500 4400 6000 Ω Temperature Error – Span -0.5 ±0.3 0.5 %Span 3 Temperature Error – Zero -0.5 ±0.1 0.5 %Span 3 %Span 3 Thermal Hysteresis – Zero ±0.1 Supply Current 1.5 Response Time (10% to 90%) 1.0 mS Output Noise (10Hz to 1kHz) 1.0 µV p-p MΩ 5 ±0.1 %Span 6 7 Insulation Resistance (50 Vdc) 2.0 50 Long Term Stability (Offset & Span) Pressure Overload mA 3X Rated 0 50 °C Operating Temperature -40 +125 °C Storage Temperature -50 +150 °C 3 grams Compensated Temperature Weight Solder Temperature 250ºC Max 5 Sec. Media Non-Corrosive Dry Gases Compatible with Silicon, Pyrex, RTV, Gold, Nickel, and Aluminum 4 Notes 1. Ratiometric to supply current. 2. Best fit straight line. 3. Maximum temperature error between 0°C and 50°C with respect to 25°C. For 2psi devices, Temperature Error – Zero is ±1.25%. 4. For a zero-to-full scale pressure step change. 5. Minimum resistance between case and pins. 6. Long term stability over a one year period with constant current and temperature. 7. 2X maximum for 250 psi device. 20 psi maximum for 2 and 5 psi devices. 13and43_Standard www.meas-spec.com 2/4 June 2011 13 and 43 Standard DIMENSIONS CONNECTIONS 13and43_Standard www.meas-spec.com 3/4 June 2011 13 and 43 Standard APPLICATION SCHEMATIC ORDERING INFORMATION 13A - 015 G 43A - 015 G Type (G = Gage, A = Absolute) Type (G = Gage, A = Absolute) Pressure Range Pressure Range Model Model NORTH AMERICA EUROPE Measurement Specialties 45738 Northport Loop West Fremont, CA 94538 Tel: 1-800-767-1888 Fax: 1-510-498-1578 Sales: pfg.cs.amer@meas-spec.com Measurement Specialties (Europe), Ltd. 26 Rue des Dames 78340 Les Clayes-sous-Bois, France Tel: +33 (0) 130 79 33 00 Fax: +33 (0) 134 81 03 59 Sales: pfg.cs.emea@meas-spec.com ASIA Measurement Specialties (China), Ltd. No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518057 China Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 Sales: pfg.cs.asia@meas-spec.com The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. 13and43_Standard www.meas-spec.com 4/4 June 2011