443975-1
Box Mount D-Sub Connectors, Receptacle, Round Termination Post & Tail Diameter .
03 in [.76 mm], Cable-to-Board, 9 Position, 1 Connector Shell Size
443975-1
ACTIVE
AMPLIMITE
TE Internal #: 443975-1
Box Mount D-Sub Connectors, Receptacle, Round Termination
Post & Tail Diameter .03 in [.76 mm], Cable-to-Board, 9 Position, 1
Connector Shell Size
View on TE.com >
Connectors > D-Shaped Connectors > D-Sub Connectors > Box Mount D-Sub Connectors
Connector & Housing Type: Receptacle
Round Termination Post & Tail Diameter: .76 mm [ .03 in ]
Connector System: Cable-to-Board
Number of Positions: 9
Power/Signal/Coax Combination: No
Features
Product Type Features
Connector & Housing Type
Receptacle
Connector System
Cable-to-Board
Connector Shell Size
1
Sealable
No
Connector & Contact Terminates To
Printed Circuit Board
Configuration Features
PCB Mount Orientation
Vertical
Number of Positions
9
Power/Signal/Coax Combination
No
Body Features
Rear Shell Material
Steel
Rear Shell Plating Material
Cadmium
Front Shell Plating Material
Cadmium
Front Shell Material
Steel
D-Sub Connector Insert Arrangement
MS18273-1
Contact Features
10 µin
Contact Mating Area Plating Material
Gold
PCB Contact Termination Area Plating Material
Gold
For support call+1 800 522 6752
05/20/2024 03:39PM | Page 1
443975-1
Box Mount D-Sub Connectors, Receptacle, Round Termination Post & Tail Diameter .
03 in [.76 mm], Cable-to-Board, 9 Position, 1 Connector Shell Size
PCB Contact Termination Area Plating Material
Gold
Contact Base Material
Brass
Contact Type
Socket
Contact Size
Size 20
Contact Current Rating (Max)
5A
Termination Features
Termination Post & Tail Length
3.95 mm[.156 in]
Termination Method to Printed Circuit Board
Through Hole - Solder
Round Termination Post & Tail Diameter
.76 mm[.03 in]
Mechanical Attachment
Mounting Hole Diameter
3.05 mm[.12 in]
Mating Alignment
Without
Housing Features
Centerline (Pitch)
2.77 mm[.109 in]
Usage Conditions
Operating Temperature Range
-55 – 125 °C[-67 – 257 °F]
Operation/Application
Circuit Application
Signal
Packaging Features
Packaging Method
Package
Product Compliance
For compliance documentation, visit the product page on TE.com>
EU RoHS Directive 2011/65/EU
Not Compliant
EU ELV Directive 2000/53/EC
Not Compliant
China RoHS 2 Directive MIIT Order No 32, 2016
Restricted Materials Above Threshold
EU REACH Regulation (EC) No. 1907/2006
Current ECHA Candidate List: JAN 2024
(240)
Candidate List Declared Against: JAN 2024
(240)
SVHC > Threshold:
Cd (99.5% in Component Part Plating)
Article Safe Usage Statements:
Use personal protective equipment as required. Do not eat, drink or smoke when
using this product. Recycle if possible and dispose of the article by following all
applicable governmental regulations relevant to your geographic location.
Halogen Content
For support call+1 800 522 6752
Low Halogen - Br, Cl, F, I < 900 ppm per
homogenous material. Also BFR/CFR/PVC
05/20/2024 03:39PM | Page 2
443975-1
Box Mount D-Sub Connectors, Receptacle, Round Termination Post & Tail Diameter .
03 in [.76 mm], Cable-to-Board, 9 Position, 1 Connector Shell Size
Halogen Content
Low Halogen - Br, Cl, F, I < 900 ppm per
homogenous material. Also BFR/CFR/PVC
Free
Solder Process Capability
Wave solder capable to 265°C
Product Compliance Disclaimer
This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge
based on the information they provided. This information is subject to change. The part numbers that TE has identified as
EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent
chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these
limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products
will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked. Additionally, the part
numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous
materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits
as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulation, the information TE provides
on SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) ‘Guidance on
requirements for substances in articles’ posted at this URL: https://echa.europa.eu/guidance-documents/guidance-onreach
Customers Also Bought
TE Part #861253-1
TE Part #1-1617121-1
TE Part #3-2176392-0
TE Part #443975-4
RECEPTACLE
JMAC-26XP = M39016/9-062P
RQ 1206 267K 0.1% 10PPM 5K RL
AMPLIMITE,RCPT ASY,POSTD,109,4
TE Part #5413515-9
TE Part #1218124-1
TE Part #1218124-3
TE Part #YDIV44E17-26SNC009
JACK,DECOUPLER,RTANG,BNC PCB
9 POS,ASSY,PLUG,LOW PROF,109
25 POS,ASSY,PLUG,LOW PROF,109
RECP ASSY
Documents
Product Drawings
AMPLIMITE,RCPT ASY,POSTD,109,1
English
CAD Files
3D PDF
3D
Customer View Model
ENG_CVM_CVM_443975-1_F.2d_dxf.zip
English
Customer View Model
For support call+1 800 522 6752
05/20/2024 03:39PM | Page 3
443975-1
Box Mount D-Sub Connectors, Receptacle, Round Termination Post & Tail Diameter .
03 in [.76 mm], Cable-to-Board, 9 Position, 1 Connector Shell Size
Customer View Model
ENG_CVM_CVM_443975-1_F.3d_igs.zip
English
Customer View Model
ENG_CVM_CVM_443975-1_F.3d_stp.zip
English
3D PDF
English
Customer View Model
ENG_CVM_443975-1_C.2d_dxf.zip
English
Customer View Model
ENG_CVM_443975-1_C.3d_igs.zip
English
Customer View Model
ENG_CVM_443975-1_C.3d_stp.zip
English
By downloading the CAD file I accept and agree to the Terms and Conditions of use.
For support call+1 800 522 6752
05/20/2024 03:39PM | Page 4
