44A9605-16-5

SPECIFICATION CONTROL DRAWING TITLE 44A9605 Date WIRE, RADIATION-CROSSLINKED, POLYALKENE-INSULATED, LIGHTWEIGHT, GENERAL PURPOSE, WATERTIGHT, 600 VOLT Revision 9-23-13 J This specification sheet forms a part of the latest issue of Raychem Specification 44. CONDUCTOR - TIN-COATED COPPER (WATERTIGHT) PRIMARY INSULATION - RADIATION-CROSSLINKED, EXTRUDED POLYALKENE JACKET - RADIATION-CROSSLINKED, MODIFIED PVDF Thickness: .005 ± .001 in. TABLE I. CONSTRUCTION DETAILS CONDUCTOR STRANDING (number x AWG) (number x SEOD) FINISHED WIRE NOMINAL DIAMETER OF STRANDED CONDUCTOR (inch) MAXIMUM RESISTANCE AT 20°C (ohms/1000 ft) DIAMETER (inch) MAXIMUM WEIGHT (lbs/1000 ft.) .038 10.9 .078 ± .003 6.2 PART NUMBER 1/ WIRE SIZE (AWG) 44A9605-20-* 20 7 x 28 44A9605-18-* 18 7 x 26 .048 6.87 .088 ± .003 8.8 44A9605-16-* 16 7 x .0192 .058 4.33 .097 ± .004 11.7 44A9605-14-* 14 7 x .0242 .073 2.78 .115 ± .004 17.7 TABLE II. PERFORMANCE DETAILS BEND TESTING PART NUMBER 1/ 44A9605-20-* MANDREL DIAMETER (inch) (± 3%) WEIGHT (lb) (± 3%) IMMERSION, LIFE CYCLE, AND ACCELERATED AGING COLD BEND WRAP IMMERSION, LIFE CYCLE, AND ACCELERATED AGING COLD BEND .750 2.00 .250 .500 1.00 44A9605-18-* 1.00 3.00 .500 .500 1.00 44A9605-16-* 1.00 3.00 .500 .500 1.00 44A9605-14-* 1.50 4.00 .500 .500 3.00 WIRE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 135°C Maximum continuous conductor temperature VOLTAGE RATING: 600 volts (rms) at sea level ACCELERATED AGING: 225 ± 2°C for 6 hours Identification legibility, 225 ± 2°C for 6 hours INSULATION RESISTANCE: 5000 megohms for 1000 ft. (minimum) LOW TEMPERATURE-COLD BEND: -55 ± 2°C for 4 hours SHRINKAGE: 225 ± 2°C, 0.125 in. (maximum) in 12 inches THERMAL SHOCK: Not Applicable WATERTIGHTNESS: Test per MIL-DTL-24640 with a pressurization time of 5 minutes. No water leakage when tested on a 5-inch length at 2.2 lbf/in2 and on a 10-inch length at 5.8 lbf/in2. 1/ PART NUMBER: The “*” in the part numbers above shall be replaced by a color code designator. Example: AWG 18, white: 44A9605-18-9 Except as specified above, this construction shall meet all requirements of Raychem Specification Sheet 44A0311. Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. Raychem, TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Page 1 of 1 DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL. THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. Raychem Wire & Cable 501 Oakside Avenue Redwood City, CA 94063-3800 Phone: 1-800-227-8816 Fax: 1-650-361-6297 © 2013 Tyco Electronics Corporation. All rights reserved.