467437J001

RAYCHEM Tubing Products 1 Versafit V4 Heat-shrinkable Tubing Very-Thin-Wall, Very Flexible, Highly Flame-Retardant, Polyolefin Tubing Product Facts 2:1 shrink ratio Very thin wall provides space savings and rapid shrinking ■ Low shrink temperature further reduces installation time and risk of damage to temperature-sensitive components ■ Very flexible; doesn’t easily wrinkle when bent ■ Free of polybrominated biphenyls (PBBs) and polybrominated biphenyl oxides and ethers (PBBOs and PBBEs), which are classified as environmentally hazardous substances ■ RoHS compliant ■ ■ Specifications/Approvals Applications Installation Operating Temperature Range Typically used where space saving is important. Offers the ability to pack components more closely than is possible with standard tubings. Costeffective choice for many commercial applications; electrically insulates and protects in-line components, disconnect terminals, and splices. Used for strain relief on high-density connectors. Minimum shrink temperature: 70°C [158°F] -30°C to 125°C [-22°F to 257°F] Minimum full recovery temperature: 90°C [194°F] Series UL CSA Versafit V4 E85381 VW-1 300 V, 125°C LR31929 VW-1 150 V, 125°C Americas Europe Asia Pacific ■ ■ ■ Available in: Raychem ® RW-3023 1-137 9-1773447-9 CIS WR 08/2011 te.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-475-6222 Mexico: 52-55-1106-0800 L. & S. America: 54-11-4733-2200 Germany: 49-6251-133-1999 China: 86-400-820-6015 Japan: 81-44-844-8013 UK: 44-800-267-666 RAYCHEM Tubing Products Versafit V4 (Continued) Product Dimensions Size 0.6 0.8 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.0 9.0 10.0 Inch Size 3/64 1/16 3/32 1/8 3/16 1/4 3/8 1/2 3/4 1 Inside Diameter Maximum Expanded as Supplied Recovered After Heating 0.95 ± 0.25 [0.037 ± 0.010] 0.30 [0.012] 1.20 ± 0.25 [0.047 ± 0.010] 0.40 [0.016] 1.40 ± 0.25 [0.055 ± 0.010] 0.50 [0.020] 1.90 ± 0.25 [0.075 ± 0.010] 0.75 [0.030] 2.30 ± 0.25 [0.091 ± 0.010] 1.00 [0.039] 2.80 ± 0.25 [0.110 ± 0.010] 1.25 [0.049] 3.30 ± 0.25 [0.130 ± 0.010] 1.50 [0.059] 3.80 ± 0.25 [0.150 ± 0.010] 1.75 [0.069] 4.40 ± 0.25 [0.173 ± 0.010] 2.00 [0.079] 5.50 ± 0.25 [0.217 ± 0.010] 2.50 [0.098] 6.50 ± 0.40 [0.256 ± 0.016] 3.00 [0.118] 7.50 ± 0.40 [0.295 ± 0.016] 3.50 [0.138] 8.50 ± 0.40 [0.335 ± 0.016] 4.00 [0.158] 9.50 ± 0.40 [0.374 ± 0.016] 4.50 [0.177] 10.50 ± 0.50 [0.413 ± 0.020] 5.00 [0.197] Inside Diameter Minimum Expanded Maximum Recovered as Supplied After Heating 1.2 [0.046] 0.6 [0.023] 1.6 [0.062] 0.8 [0.031] 2.4 [0.093] 1.2 [0.046] 3.2 [0.125] 1.6 [0.062] 4.8 [0.187] 2.4 [0.093] 6.4 [0.250] 3.2 [0.125] 9.5 [0.375] 4.8 [0.187] 12.7 [0.500] 6.4 [0.250] 19.1 [0.750] 9.5 [0.375] 25.4 [1.000] 12.7 [0.500] Wall Thickness Expanded as Recovered* Supplied After Heating (Nominal) (Minimum) 0.10 [0.004] 0.25 [0.010] 0.10 [0.004] 0.25 [0.010] 0.10 [0.004] 0.25 [0.010] 0.10 [0.004] 0.25 [0.010] 0.10 [0.004] 0.25 [0.010] 0.15 [0.006] 0.25 [0.010] 0.15 [0.006] 0.25 [0.010] 0.15 [0.006] 0.25 [0.010] 0.15 [0.006] 0.25 [0.010] 0.15 [0.006] 0.25 [0.010] 0.15 [0.006] 0.28 [0.011] 0.15 [0.006] 0.28 [0.011] 0.15 [0.006] 0.28 [0.011] 0.15 [0.006] 0.28 [0.011] 0.15 [0.006] 0.28 [0.011] Recovered Wall Thickness* After Heating 0.30 ± 0.05 [0.012 ± 0.002] 0.30 ± 0.05 [0.012 ± 0.002] 0.30 ± 0.05 [0.012 ± 0.002] 0.33 ± 0.05 [0.013 ± 0.002] 0.33 ± 0.05 [0.013 ± 0.002] 0.36 ± 0.08 [0.014 ± 0.003] 0.36 ± 0.08 [0.014 ± 0.003] 0.36 ± 0.08 [0.014 ± 0.003] 0.43 ± 0.08 [0.017 ± 0.003] 0.51 ± 0.08 [0.020 ± 0.003] *Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Size selection Standard packaging Marking Ordering description Standard Black (-0) Nonstandard Other colors available upon request. Always order the largest size that will shrink snugly over the component to be covered. Special order sizes are available upon request. On spools. Marked with UL/CSA/-F- legends (metric sizes) or unmarked (inch sizes). Specify product name, size (mm or in.) and color (for example, V4-1.0-0). 1-138 9-1773447-9 CIS WR 08/2011 te.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-475-6222 Mexico: 52-55-1106-0800 L. & S. America: 54-11-4733-2200 Germany: 49-6251-133-1999 China: 86-400-820-6015 Japan: 81-44-844-8013 UK: 44-800-267-666