47-030A

17 and 47 UltraStable™ 17 47  PC Board Mountable Pressure Sensor  0-100 mV Output  Current Excitation  Gage and Absolute  Temperature Compensated DESCRIPTION The 17 and 47 UltraStable™ are high performance, temperature compensated, piezoresistive silicon pressure sensors packaged in a TO-8 configuration. It uses Measurement Specialties’ proprietary UltraStable™ die to provide excellent performance and long-term stability over wide temperatures. Gage and absolute pressure ranges from 0-15 to 0-250 psi are available. Integral temperature compensation is provided over a range of -20ºC to +85ºC using laser-trimmed resistors. An additional lasertrimmed resistor is included to normalize pressure sensitivity variations by programming the gain of an external differential amplifier. This provides sensitivity interchangeability of ±1%. Please refer to 13 and 43 for information on products with operating pressures less than 0-15 psi. FEATURES      APPLICATIONS       TO-8 Package -20ºC to +85ºC Compensated Temperature Range ±0.1% Non Linearity 1.0% Interchangeable Span (provided by gain set resistor) Solid State Reliability Medical Instruments Process Control Factory Automation Altitude Measurement Vacuum Measurement Handheld Calibrators STANDARD RANGES Range psig psia 0 to 15   0 to 30   0 to 50   0 to 100   0 to 250   17USand47US www.meas-spec.com 1/4 June 2011 17 and 47 UltraStable™ PERFORMANCE SPECIFICATIONS Supply Current: 1.5 mA Ambient Temperature: 25°C (unless otherwise specified) PARAMETERS Span MIN TYP MAX UNITS NOTES 75 100 150 mV 1 Zero Pressure Output -2 2 mV Pressure Non Linearity -0.1 ±0.05 0.1 %Span Pressure Hysteresis -0.1 ±0.01 0.1 %Span Input Resistance 2200 4000 5800 Ω Output Resistance 4200 2 Ω Temperature Error – Span -0.5 ±0.3 0.5 %Span 3 Temperature Error – Zero -0.5 ±0.1 0.5 %Span 3 Temperature Coefficient – Resistance 0.15 %/ºC 3 Thermal Hysteresis – Zero ±0.05 %Span 3 Short Term Stability (Offset & Span) ±0.05 %Span 4 %Span 5 Long Term Stability (Offset & Span) Supply Current ±0.1 0.5 1.5 Response Time (10% to 90%) 1.0 Output Noise (10Hz to 1kHz) 1.0 Pressure Overload Compensated Temperature -20 2.0 mA mS µV p-p 3X Rated +85 °C °C Operating Temperature -40 +125 Storage Temperature -50 +150 °C 3 grams Weight 6 Solder Temperature 250ºC Max 5 Sec. Media Non-Corrosive Dry Gases Compatible with Silicon, Pyrex, RTV, Gold, Nickel, and Aluminum 7 Notes 1. Ratiometric to supply current. For 250 psi devices, the minimum span value is 62 mV. 2. Best fit straight line. 3. Maximum temperature error between -20°C and +85°C with respect to 25°C. 4. Short term stability over 7 days with constant current and temperature. 5. Long term stability over a one year period with constant current and temperature. 6. For a zero-to-full scale pressure step change. 7. 2X maximum for 250 psi device. 17USand47US www.meas-spec.com 2/4 June 2011 17 and 47 UltraStable™ DIMENSIONS CONNECTIONS 17USand47US www.meas-spec.com 3/4 June 2011 17 and 47 UltraStable™ APPLICATION SCHEMATIC ORDERING INFORMATION 17 - 015 G 47 - 015 G Type (G = Gage, A = Absolute) Type (G = Gage, A = Absolute) Pressure Range Pressure Range Model Model NORTH AMERICA EUROPE Measurement Specialties 45738 Northport Loop West Fremont, CA 94538 Tel: 1-800-767-1888 Fax: 1-510-498-1578 Sales: pfg.cs.amer@meas-spec.com Measurement Specialties (Europe), Ltd. 26 Rue des Dames 78340 Les Clayes-sous-Bois, France Tel: +33 (0) 130 79 33 00 Fax: +33 (0) 134 81 03 59 Sales: pfg.cs.emea@meas-spec.com ASIA Measurement Specialties (China), Ltd. No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518057 China Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 Sales: pfg.cs.asia@meas-spec.com The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. 17USand47US www.meas-spec.com 4/4 June 2011 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 47-015A