4859370003

SPECIFICATION CONTROL DRAWING Product Revision Product Name S03-01-R-100 G Ident. Code Size1R S03-02-R-100 G Size2R S03-03-R-100 G Size3R S03-04-R-100 G Size4R S03-05-R-100 G Size5R Product Dimensions øB øC L±1.75 min. min. (L±0.07) 16.5 1.9 2.65 (0.650) (0.075) (0.105) 16.5 2.65 3.68 (0.650) (0.105) (0.145) 16.5 4.30 5.08 (0.650) (0.170) (0.200) 19.1 5.95 6.45 (0.750) (0.235) (0.255) 19.1 7.0 7.6 (0.750) (0.275) (0.300) H min. 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) øE max. 2.65 (0.105) 3.68 (0.145) 5.08 (0.200) 6.45 (0.255) 7.6 (0.300) Cable Dimensions øF øD min. max. 0.90 1.9 (0.035) (0.075) 1.40 2.65 (0.055) (0.105) 2.15 4.3 (0.085) (0.170) 3.30 5.95 (0.130) (0.235) 4.30 7.0 (0.170) (0.275) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. THERMAL INDICATOR: Color change violet to colorless. 3. MELTABLE RINGS: Stabilized thermoplastic. Color: blue. 4. PRE-INSTALLED BRAID: Tin plated copper strands. CMA 640. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 125°C minimum, meeting the dimensional criteria listed and having tin or silver plated shields and insulation compatible with the insert material. For compatible insulations, see MIL-S-83519/2 or consult Raychem. 2. When installed per Raychem process standard RCPS-100-70, assemblies will meet those requirements of Raychem Specification RT-1404 and MIL-S-83519/2 which do not require electrical testing while parts are immersed in water. 3. Temperature range: -55°C to +150°C. 4. Parts shall be marked with identification code per table. For best results, prepare the cable as shown: SolderSleeves a trademark of TE Connectivity. THERMOFIT DEVICES TE Connectivity 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend 0.00 N/A this drawing at any time. Users should 0.0 N/A ROUGHNESS IN evaluate the suitability of the product for 0 N/A MICRON their application. TITLE: SOLDERSLEEVE DEVICE SHIELD TERMINATION WITH BRAID DOCUMENT NO.: S03-0X-R-100 DCR NUMBER: REPLACES: D990968 DRAWN BY: DATE: PROD. REV. DOC ISSUE: SCALE: M. FORONDA 11/22/99 SEE TABLE 6 None Print Date: 11-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision. D990118 SIZE: A SHEET: 1 of 1