5-1393132-0

Catalog 1308242 Issued 3-03 (PDF Rev. 1-06) P&B P31/P41 series Definite Purpose Magnetic Contactor 16 to 40 Amp Full Load 20 to 50 Amp Resistive P31 File E25575 File LR15734 P41 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 25°C • 3 phase and single phase switching. • Integral dual QC terminals. • Class “B” coil insulation. • Variety of main terminals. • Applications include HVAC industrial control. • Direct activated DC coils. Voltage: 12 and 24V DC. See Coil Data table. Power: 8W. Duty Cycle: Continuous. Insulation: Class B. Initial Insulation Resistance: 100 megohms minimum. Coil Data @ +25°C Contact Data @ 25°C Main Contacts: Arrangements: 3 Form X (3PST-NO-DM) and 4 Form X (4PST-NO-DM). Ratings: See Main Contact Ratings Table. Material: Silver-cadmium oxide. Initial Breakdown Voltage: 2,200V rms minimum between all elements and between all elements to ground. Expected Life: 200,000 operations at motor load. 500,000 operations, mechanical. Minimum Contact Data: 3A @ 120VAC. Code Nominal Voltage DC Resistance in Ohms ± 10% Must Operate Voltage Nominal Coil Current (mA) DFO DHO 12DC 24DC 21 84 9 18 571 286 *Applicable for vertical or horizontal mounting, but not for upside-down mounting. Note: Coil suppression is recommended for all units. Operate Data @ 25°C Must-Operate Voltage: See Coil Data Table. Initial Dielectric Strength Initial Breakdown Voltage: 2,200V rms minimum between all elements and between all elements and ground. Environmental Data Main Contact Ratings @ 25°C, 60 Hz. AC (Per Pole) Mechanical Data P31C P31E P41B P41C @ 240VAC LRA FLA @ 480VAC LRA FLA 150 240 120 150 125 200 100 125 25 40 20 25 25 40 20 25 LRA 100 160 80 100 @ 600VAC FLA 25 40 20 25 Temperature Range: –55°C to +65°C. Mounting: Universal mounting bracket. See Outline Drawings. Termination: Contacts: Dual .250” (6.35mm) quick connect with or without binder head screw or box lug. Coil: Dual .250” (6.35mm) quick connect. Weight: 18 oz. (510g) approximately. RES 35 50 25 35 Ordering Information Typical Part No. 1. Type: P31 = 3 Pole B P41 C 47 D HO 1 03 P41 = 4 Pole 2. Contact Rating C = 25 Amp E = 40 Amp (40A rating only offered on P31) 3. Contact Arrangement: 42 = 3 Form X (3PST-NO-DM) 47 = 4 Form X (4PST-NO-DM) P41 only 4. Coil Input: D = Direct Current (Direct Operated) 5. Coil Voltage: FO = 12VDC, with coil cover HO = 24VDC, with coil cover 6. Coil Terminal Location And Marking (See Terminal Location and Marking Diagram): 1 = Dual .250” (6.35mm) quick connect 7. Contact Terminals (See Contact Terminal Options Diagram): 03 = Dual .250” (6.35mm) quick connect turned up per Figure 03 (25 amps, Max.) 05 = #10-32 binder head screw with dual .250” (6.35mm) quick connect per Figure 05 08 = Aluminum box lug (for #4-#14 copper wire) with dual .250” (6.35mm) quick connect per Figure 08 Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Dimensions are shown for 826 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 (PDF Rev. 1-06) P&B Outline Dimensions P31 2.415 MAX. (61.34) .105 ± .005 R. (2.67 ± .13) 10 PLACES Top View 2.870 MAX. (72.90) 1.000 ± .010 (25.40 ± .25) .062 ± .005 (1.57 ± .13) .250 ± .005 (6.35 ± .13) COIL TERMINALS 3.125 ± .010 (79.38 ± .25) L3 3.250 ± .010 (82.55 ± .25) L2 T3 3.800 MAX. (96.52) T2 LOAD SIDE L1 T1 2.725 MAX. (69.22) LINE SIDE .210 ± .010 (5.33 ± .25) .210 ± .010 (5.33 ± .25) 1.500 ± .010 (38.10 ± .25) 2.000 ± .010 (50.80 ± .25) 2.550 MAX. (64.77) P41 Top View 2.630 MAX. (66.80) 2.730 MAX. (69.34) .250 ± .005 (6.35 ± .13) 1.000 ± .010 (25.40 ± .25) 3.125 ± .010 (79.38 ± .25) L4 3.250 ± .010 (82.55 ± .25) L3 T4 3.800 MAX. (96.52) L2 T3 LOAD SIDE L1 2.725 MAX. (69.22) T2 COIL TERMINALS T1 .105 ± .005 R. (2.67 ± .13) 10 PLACES LINE SIDE .210 ± .010 (5.33 ± .25) .210 ± .010 (5.33 ± .25) 1.500 ± .010 (38.10 ± .25) 2.000 ± .010 (50.80 ± .25) 2.550 MAX. (64.77) Contact Terminal Options Figure 02 #10-32 UNF-2B Tapped Hole Figure 06 #10-32 UNF-2A X .375” (9.525mm) Screw With #12 Binder Head Dimensions are shown for reference purposes only. Figure 03 .250” (6.35mm) Quick Connect Turned Up Figure 07 #10-32 UNF-2A X .500” (12.7mm) Screw With Captive Pressure Plate Dimensions are in inches over (millimeters) unless otherwise specified. Figure 05 #10-32 UNF-2A X .375” (9.525mm) Binder Head Screw Figure 08 Box Lug Connector Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 827