5-1415016-1

2. Termination: 1 = 1 pole 2. Termination: 1 = 1 pole 3. Coil Voltage: 05 = 5VDC 06 = 6VDC 09 = 9VDC 12= 12VDC 4. Coil Input: L = Sensitive D = Standard 24 = 24VDC Signal Relays 5. Contact Material: 3 = Silver Nickel H = Sealed plastic case n 1pole, 1A, 1 09 = 9VDC 12= 12VDC 4. Coil Input: L = Sensitive D = Standard 24 = 24VDC OEG 5. Contact Material: 3 = Silver Nickel Signal PCB Relay TSC 6. Enclosure: Blank = Vented (Flux-tight) cover 3. Coil Voltage: 05 = 5VDC 06 = 6VDC form C (CO) 7. Suffix: n 2.54mm terminal pitch same as I.C. socket terminal ,000 = Standard model Other Suffix pitch = Custom model 6. Enclosure: Blank = Vented (Flux-tight) cover H = Sealed plas 7. Suffix: ,000 = Standard model Other Suffix = Our authorized or immediate Ourdelivery. authorized distributors are more likely to stock the following items for immediate delivery. distributors are more likely to TSC-105L3H,000 TSC-112L3H,000 TSC-124L3H,000 TSC-105D3H,000 TSC-112D3H,000 TSC-124D3H,000 Outline Dimensions Wiring Diagram (Bottom View) Outline Dimensions agram (Bottom View) Typical applications Telecommunications, office machine .390 ± .012 (9.9 ± .3) .138 (3.5) Approvals UL E82292, CSA LR48471-189 .2 (5.08) .1 (2.54) Coil Data Coil voltage range .016 types .016 on request Technical data.020 of approved (.4) (.4) (.5) .056 .300 .1 .012 Contact Data (1.43) (Bottom View) (7.62) (2.54) (.3) .020 (.5) .2 1 form C(5.08) (CO) Contact arrangement Rated voltage 24VDC, 120VAC .484 ± .012 Max. switching 30VDC, 120VAC 6 – 0.31 DIAvoltage (12.3 ± .3) (.8) Rated current 1A Switching power 120VA, 24W Contact material AgNi Alloy Min. recommended contact load 1mA at 1VDC .29 ± .012 Initial contact resistance 50mΩ at 100mA, 6VDC (7.4 ± .3) Frequency of operation 72000 ops/h .300 Operate/release time max. 5/5ms (7.62) Electrical endurance 1A, 120VAC, resistive, 100x103 ops. 1A, 24VDC, resistive, 100x103 ops. Contact ratings 1A, 120VAC/24VDC Mechanical endurance 10x106 operations .012 (.3) All figures are given for coil without pre-energization, at ambient temperature +23°C. Coil operative range Ambient Temp. & Operate Voltage 40 100 VDC Temp Rise (°C) 25 90 60 20 50 15 40 10 ol Coil) 70 5 0 250 24W 24.0 °C application field 30 load limit curve 80.0 °C 20 10 0 0.1 0 35 90 230 L type 0.15W 210 190 170 150 D type 0.30W 130 ifications and availability Dimensions are shown for ect to change. reference purposes only. 01-2011, Rev. 0111 www.te.com © 2011 Tyco Electronics Ltd. 0.8 0.9 30 Pick-Up Voltage (Cool Coil) -30 70 24.0 °C 24W 60 load limit curve 20 50 10 90 50 10 0.7 25 80 15 40 110 70 0.4 0.5 0.6 1 0.1 0.2 0.3 Contact Current (A) (W) Coil Power 30 VDC 80 Am 40100 Temp Rise (°C) 30 LoadCoil Limit Curve Rise temperature rise Coil Temperature 270 of Supplying Voltage to Coil 90 .2 (5.08) Reference Data Load Limit Max DC load Curve breaking capacity Coil Temperature Rise 35 .016 (.4) Coil versions, DC coil .056 .300 .1 .012 Coil Rated Operate View) Release (7.62) PC Board Layout (Bottom (2.54) Coil (1.43)Rated coil (.3) code voltage voltage voltage resistance power VDC VDC VDC Ω±10% mW Standard coil, 300mW 6 – 0.31 DIA .484 ± .012 (12.3 ± .3) (.8) 0.25 05 5 3.75 83 300 06 6 4.5 0.3 120 300 09 9 6.75 0.45 270 300 .2 12 12 (5.08) 9.0 0.6 480 .29 ± .012 300 24 24 18.0 1.2 1.920 (7.4 ± .3) 300 Sensitive coil 150mW .1 .300 05 5 (2.54) 3.75 (7.62) 0.25 166 150 06 6 4.5 0.3 240 150 09 9 6.75 0.45 540 150 12 12 9.0 0.6 960 150 24 24 18.0 1.2 3840 150 Reference Data W .016 (.4) .138 (3.5) 5 to 24VDC of Supplying Voltage to Coil Layout .390 ± .012 (9.9 ± .3) UC ge 0 TSC-124L3H,000 TSC-105D3H,000 TSC-105L3H,000 TSC-112L3H,000 TSC-112D3H,000 TSC-124D3H,000 -10 www.tycoelectronics.com Dimensions are in inches over Technical support: (millimeters) unless otherwise 317 Refer to insidespecified. back cover. Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 10 70 30 50 Ambient Temp. ( °C) 90 5 0 30 application field 80.0 °C 20 10 0 0.1 0 0.1 0.2 0.31 0.4 0.5 0.6 Coil Power Contact Current (A) (W) Dimensions are shown for Specifications and availability Insulation Data reference purposes only. subject to change. Initial dielectric strength between open contacts between contact and coil Initial surge withstand voltage between contact and coil Clearance/creepage between contact and coil Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 400Vrms 1000Vrms 0.710 0.8 0.9 Dimensions are in in www.tycoelectronics.com (millimeters)317 unless Technical support: specified. Refer to inside back cover. 1500V (10/160μs) 2.0/1.5mm Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 5. Contact Material: 3 = Silver Nickel 24VDC Signal Relays 8242 3 = Sealed plastic case OEG her Suffix = Custom TSC -1 model 05 Signal PCB Relay TSC (Continued) 3 H ,000 L e likely to Other stock Data the following items for immediate delivery. 112D3H,000Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content 124D3H,000 refer to the Product Compliance Support Center at www.tycoelectronics.com/customersupport/rohssupportcenter Ambient temperature -30 to 80°C Wiring Diagram (Bottom View) Category of environmental protection IEC 61810 RTII - flux proof, RTIII - wash tight Vibration resistance (functional) 10 to 50Hz, 1.5mm double amplitude Shock resistance (functional) IEC 60068-2-27 (half sine) 98m/s2, 11ms Terminal type PCB-THT Weight 3g Resistance to soldering heat THT IEC 60068-2-20 260°C/5s Packaging/unit tube/50 pcs., box/2000 pcs. 6. Enclosure: Blank = Vented (Flux-tight) cover H = Sealed plastic case 7. Suffix: ,000 = Standard model Other Suffix = Custom model Our authorized distributors are more likely to stock the following TSC-124L3H,000 TSC-105D3H,000 TSC-105L3H,000 TSC-112L3H,000 TSC-112D3H,000 TSC-124D3H,000 Outline Dimensions W Dimensions .390 ± .012 (9.9 ± .3) .138 (3.5) .016 .020 (.4) (.5) .300 (7.62) g items for immediate delivery. .012 PC .2 (.3) (5.08) Terminal assignment OEG .016 (.4) .1 (2.54) .056 (1.43) .012 (.3) .012 (.3) .2 (5.08) PC .484 ± .012 (12.3 ± .3) Board Layout (Bottom View) Bottom(Bottom view on solder pins Wiring Diagram View) PCB layout Bottom view on solder pins .29 ± .012 (7.4 ± .3) 6 – 0.31 DIA (.8) .2 (5.08) .1 (2.54) .300 (7.62) Reference Data Ambient Temp. & Opera Coil Temperature Rise 270 100 80 Temp Rise (°C) 70 Load Limit Curve Typical product code Ambient Temp. & structure Operate Voltage Product code 40 6 – 0.31 DIA (.8) 60 TSC 24.0 °C -1 12 D 3 of Supplying Voltage to Coil PC Board Layout (Bottom View) 270 250 90 230 210 H 190 ,000 170 VDC of Supplying Voltage to Coil 250 150 50 Type D type 0.30W 35 130 230 TSC Signal PCB Relay L type 0.15WTSC 40 30 210 .2 110 Pole 80.0 °C 30 (5.08) 190 1 1pole 90 25 24W load limit curve 20 170 Coil 70 .1 .300code: please refer to coil versions Pick-Up 20 table 150 10 (2.54) D type 0.30W Coil 50 (7.62) 0 130 power Coil 30 15 -30 -10 10 30 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 110 D Standard 300mW L Sensitive 150mW application field Coil Power (W) Ambient T 10 Contact material 90 70 3 AgNi 5 Dimensions are shown for Dimensions are in inches over reference purposes only. (millimeters) unless otherwise Pick-Up Voltage (Cool Coil) Sealing 50 specified. 0 tight 30 Blank Flux proof H Wash -30 -10 10 70 0.1 30 0.9 90 1 10 50 Suffix Ambient Temp. ( °C) Contact Current (A) ,000 Standard Load Limit Curve rate Voltage nsions are in inches over meters) unless otherwise ied. Specifications and availability subject to change. 40 35 L type 0.15W www.tycoelectronics.com Technical support: 317 Refer to inside back cover. 30 Product code 25 24W Version Contact load limit curve Cont.material Coil power VDC TSC-105D3H,000 1A 1 form C (CO) AgNi Alloy 300mW 20 TSC-112D3H,000 TSC-124D3H,000 15 TSC-105L3H,000 150mW application field 10 TSC-112L3H,000 TSC-124L3H,000 5 Up Voltage (Cool Coil) Coil voltage Sealing 5VDC Wash tight 12VDC 24VDC 5VDC 12VDC 24VDC Part number 1-1419130-0 2-1419130-1 5-1440007-3 1-1419130-2 2-1419130-4 2-1419130-8 0 70 50 t Temp. ( °C) 90 0.1 Specifications and availability subject 2 to change. 01-2011, Rev. 0111 www.te.com © 2011 Tyco Electronics Ltd. 1 Contact Current (A) 10 www.tycoelectronics.com Technical support: 317 Refer to inside back cover. Datasheets and product specification ac- cording to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.