5-1415546-8

General Purpose Panel/Plug-in Relays SCHRACK Power Relay RM C/D n 1 pole 30/32 A, 1 form X, double make, NO or 1 form Z, double make + double break, NO + NC n Switching capacity up to 12800VA n DC or AC coil n Push-to-test button n Chassis mount Typical applications Battery chargers, heating control. Z Coil Data Approvals UL E214025, VDE Cert. No. 40003144 Technical data of approved types on request. Contact Data RMC RMD Contact arrangement 1 form Z, 1 form X, 1 NO + 1 NC 1 NO Rated voltage 400VAC Max. switching voltage 440VAC Rated current 30A/32A (VDE) Limiting making current, max. 20ms 60A Switching power 12000VA Contact material AgNi 90/10 Contact style single bridging contact Min. recommended contact load 24VDC/100mA Frequency of operation, with/without load, DC coil 360/6000h-1 Operate/release time max., DC coil 20/20ms Bounce time max., form A/form B, DC coil 4/6ms Contact ratings Type Contact Load Cycles EN 61810 RMC/D X of Z (NO) AgNi DC coil 32A, 400VAC res. 40°C 20x10³ RMC Y of Z (NC), AgNi 32A, 400VAC res. 40°C 10x10³ RMC/D X of Z (NO) AgNi DC coil 30A, 400VAC res. 50°C 10x10³ RMC/D X of Z (NO) AgNi AC coil 30A, 400VAC res. 40°C 10x10³ UL 508 RMC/D X/Y (NO/NC) 30 A, 277 VAC, general purpose 50°C 10x103 RMC/D X/Y (NO/NC) 30 A, 415 VAC, resistive 50°C 10x103 RMC/D X (of Z / NO), AgNi 120 VAC, 0,75 HP 50°C 10x103 RMC/D X/Y (NO/NC) 240 VAC, 2 HP 50°C 6x103 Mechanical endurance DC coil 10x106 operations AC coil 10x106 operations 03-2019, Rev. 0319 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Coil voltage range Operative range, IEC 61810 Coil insulation system according UL 6 to 220 VDC 12 to 400 VAC 2 class 130 (B) Coil versions, DC coil Coil code Rated Coil Rated coil STD LED PD3) LED+ voltage resistance power bipolar PD3) VDC Ω±10%1)2) W 006 L06 0A6 LA6 6 32 1.1 012 L12 0B2 LB2 12 110 1.3 024 L24 0C4 LC4 24 475 1.2 048 L48 0E8 LE8 48 2000 1.2 060 L60 0G0 LG0 60 2850 1.3 110 M10 1B0 MB0 110 100001) 1.2 221 N21 2C1 NC1 220 400002) 1.2 Operate voltage, DC coil 75% of rated coil voltage Release voltage, DC coil 10% of rated coil voltage 1) Coil resistance ±12%, 2) Coil resistance ±15%. 3) Protection diode PD; standard polarity: +A1 / -A2. All figures are given for coil without pre-energization, at ambient temperature +23°C. Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Panel/Plug-in Relays SCHRACK Power Relay RM C/D (Continued) Coil Data (continued) Coil versions, AC coil Coil code Rated Operate Release Coil Rated coil STD LED voltage voltage voltage resistance power 50/60Hz 50/60Hz 50/60Hz VAC VAC VAC Ω±10%1)2) VA Coil versions, AC-coil, RMC, RMD 524 R24 24 19.2/20.4 7.2 80 2.62/2.00 548 R48 48 38.4/40.8 14.4 320 2.60/2.17 560 R60 60 48.0/51.0 18.0 500 2.62/2.20 615 S15 115 92.0/97.8 34.5 1850 2.65/2.22 730 T30 230 184.0/195.5 69.0 7500 2.69/ 2.26 900 V00 400 320.0/340.0 120.0 235002) 2.61/2.20 Terminal assignment Bottom view on pins 2) Coil resistance ±15%. All figures are given for coil without pre-energization, at ambient temperature +23°C. Insulation Data RMC RMD Initial dielectric strength between open contacts 1500Vrms 2000Vrms between contact and coil 2500Vrms 2500Vrms Initial surge withstand voltage between contact and coil 6000V (1.2/50µs) Clearance/creepage between contact and coil ≥4.0/14.9mm Material group of insulation parts IIIa 1 form Z contact (1 NO + 1 NC), RMC Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature for mounting/handling -20 to +40°C in operation DC coil -40 to +60°C AC coil -40 to +40°C Mounting distance > 50mm Cold storage, IEC 60068-2-1 Test Aa (-40°C/16h) Dry heat, IEC 60068-2-2 Test B (+85°C/16h) Damp heat cyclic, IEC 60068-2-30, Db, Variant 1 12/12h +25/55°C 2 cycles Category of environmental protection IEC 61810 RTI - dust protected Vibration resistance (functional) form A (NO)/form B (NC) 10/5 g, 30 to 150Hz Terminal type quick connect (QC) Cover retention pull force 100N push force 100N Weight 81g Packaging unit 10 pcs. Dimensions 1 form X contact (1 NO), RMD Cover with mounting brackets, 6.3​mm quick connect terminals Dimensions in mm 2 03-2019, Rev. 0319 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. General Purpose Panel/Plug-in Relays SCHRACK Power Relay RM C/D (Continued) Product code structure Typical product code RM D 2 5 730 Type RM Power Relay RMC/D Contact arrangement C 1 form Z (1 NO + 1 NC), 30A (32A at AgNi versions with DC coil) D 1 form X (1 NO), 30A (32A at AgNi versions with DC coil) Version 0 Discontinued: AgCdO, without test button 1) 3 Discontinued: AgCdO, with test button 1) 2 AgNi90/10, without test button 7 AgNi90/10, with test button Enclosure 5 Cover with mounting brackets, 6.3mm quick connect terminals 9 Cover with DIN-snap-on attachment, vertical, 6.3mm quick connect terminals (on request) Coil Coil code: please refer to coil versions table 1) AgCdO contacts are discontinued and replaced with AgNi contacts (see PCN E-18-003016) Product code RMC25024 RMC25048 RMC25730 RMD25012 RMD25024 RMD25730 Contacts 1 form Z, 1 NO + 1 NC Contacts 1 form X 1 NO contact 03-2019, Rev. 0319 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Cont. material AgNi AgNi AgNi AgNi AgNi AgNi Version Without test button Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Enclosure Mounting brackets quick c. 6.3 mm Coil DC-coil DC-coil AC-coil AC-coil DC-coil DC-coil Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Coil 24VDC 48VAC 230VAC 12VDC 24VDC 230VAC Part number 5-1415546-6 5-1415546-7 5-1415544-9 5-1415546-8 5-1415546-9 6-1415544-0 Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3