5-1609998-0

KEV-BS SERIES THREE PHASE VERY HIGH PERFORMANCE EMI FILTER BOOKSHELF TYPE DUAL STAGE WYE CONFIGURATION INTRODUCTION High performance filters with bookshelf design are designed for motor drive applications requiring minimum space and convenient installation with very high performance at significant interference levels. APPLICATION • • • • AC/DC Drives HVAC Robotics UPS STANDARD NEW-DIN RAIL FEATURES • Very High-Performance Dual Stage • Bookshelf Design With Neutral • Compact / Light Weight / Cost Effective APPROVALS AND COMPLIANCE • UL Recognised • CSA Certified Specifications Electrical Characteristics Maximum Continuous Operating Voltage Current Ratings Operating Frequency 440/520VAC 7A to 150A @40°C, Din Mount 7A to 100A @40°C 50/60Hz Line to Ground 2632VDC for 1 Minute High Potential Test Voltage -440VAC Line to Line 1892VDC for 1 Minute Line to Ground 2856VDC for 1 Minute High Potential Test Voltage -520VAC Line to Line 2236VDC for 1 Minute Overload Capability 135% of Rated current for 15 minutes KEV-BS Series Three Phase Very High Performance EMI Filter Functional Characteristics Operating Temperature Range -25°C to +85°C Climatic Category 25/85/21 Termination (Depends on Current Rating) Shock Proof Flammability Corresponding to UL 94 V-0 Reference Standards Design Corresponding to UL 60939-3 and CSA 22.2 No.8-13 Selection Table – Standard Version TE Ordering Number Catalog Number Rated Current @40°C Rated Voltage @40°C Leakage Current (mA) Weight (Kgs) Termination 2-1609998-0 7KEVD10ABSW 7A 440 VAC 5 1.5 4 2-1609998-1 16KEVD10ABSW 16A 440 VAC 5 2 4 2-1609998-2 30KEVD10ABSW 30A 440 VAC 5 2.2 4 2-1609998-3 42KEVD10ABSW 42A 440 VAC 11 3 10 2-1609998-4 55KEVD10ABSW 55A 440 VAC 11 3 10 2-1609998-5 75KEVD10ABSW 75A 440 VAC 11 4 16 2-1609998-6 100KEVD10ABSW 100A 440 VAC 11 4 25 2-1609998-7 125KEVD10ABSW 125A 440 VAC 11 8 50 2-1609998-8 150KEVD10ABSW 150A 440 VAC 11 10 50 5-1609998-0 7KEVD10BBSW 7A 520 VAC 5 1.5 4 5-1609998-1 16KEVD10BBSW 16A 520 VAC 5 2 4 5-1609998-2 30KEVD10BBSW 30A 520 VAC 5 2.2 4 5-1609998-3 42KEVD10BBSW 42A 520 VAC 11 3 10 5-1609998-4 55KEVD10BBSW 55A 520 VAC 11 3 10 5-1609998-5 75KEVD10BBSW 75A 520 VAC 11 4 16 5-1609998-6 100KEVD10BBSW 100A 520 VAC 11 4 25 5-1609998-7 125KEVD10BBSW 125A 520 VAC 11 8 50 5-1609998-8 150KEVD10BBSW 150A 520 VAC 11 10 50 INDUSTRIAL / KEV-BS SERIES 2 KEV-BS Series Three Phase Very High Performance EMI Filter Selection Table – Din Rail Mount NEW VERTICAL MOUNT HORIZONTAL MOUNT Note: Din Rail not supplied TE Ordering Number Part Number Din Type Rated Current @40°C Rated Voltage @40°C Leakage Current (mA) Weight (Kgs) Termination 3-1609998-0 7KEVD10ABSWHM HORIZONTAL 7A 440 VAC 5 1.6 4 3-1609998-1 16KEVD10ABSWHM HORIZONTAL 16A 440 VAC 5 2.1 4 3-1609998-2 30KEVD10ABSWHM HORIZONTAL 30A 440 VAC 5 2.3 4 3-1609998-3 7KEVD10ABSWVM VERTICAL 7A 440 VAC 5 1.7 4 3-1609998-4 16KEVD10ABSWVM VERTICAL 16A 440 VAC 5 2.2 4 3-1609998-5 30KEVD10ABSWVM VERTICAL 30A 440 VAC 5 2.4 4 3-1609998-6 42KEVD10ABSWHM HORIZONTAL 42A 440 VAC 11 3.2 10 3-1609998-7 55KEVD10ABSWHM HORIZONTAL 55A 440 VAC 11 3.2 10 3-1609998-8 75KEVD10ABSWHM HORIZONTAL 75A 440 VAC 11 4.2 16 3-1609998-9 100KEVD10ABSWHM HORIZONTAL 100A 440 VAC 11 4.2 25 6-1609998-0 7KEVD10BBSWHM HORIZONTAL 7A 520 VAC 5 1.6 4 6-1609998-1 16KEVD10BBSWHM HORIZONTAL 16A 520 VAC 5 2.1 4 6-1609998-2 30KEVD10BBSWHM HORIZONTAL 30A 520 VAC 5 2.3 4 6-1609998-3 7KEVD10BBSWVM VERTICAL 7A 520 VAC 5 1.7 4 6-1609998-4 16KEVD10BBSWVM VERTICAL 16A 520 VAC 5 2.2 4 6-1609998-5 30KEVD10BBSWVM VERTICAL 30A 520 VAC 5 2.4 4 6-1609998-6 42KEVD10BBSWHM HORIZONTAL 42A 520 VAC 11 3.2 10 6-1609998-7 55KEVD10BBSWHM HORIZONTAL 55A 520 VAC 11 3.2 10 6-1609998-8 75KEVD10BBSWHM HORIZONTAL 75A 520 VAC 11 4.2 16 6-1609998-9 100KEVD10BBSWHM HORIZONTAL 100A 520 VAC 11 4.2 25 INDUSTRIAL / KEV-BS SERIES 3 KEV-BS Series Three Phase Very High Performance EMI Filter Connectors Cross Section 4 10 16 25 50 Wire Section (mm2) 4mm2 10 mm² 16 mm² 25 mm² 50 mm² Wire Section (AWG) 12AWG 8 AWG 6 AWG 4 AWG 1/0 AWG Wire Stripping max 10mm max 13.5 mm max 17 mm max 17 mm max 20 mm Max Recommended Torque 0.5 Nm/4.5 in.lbs 1.2 Nm/10.8 in.lbs 2-2.2 Nm/ 18-19.8 in.lbs 2 Nm/18 in.lbs 6 Nm/54 in.lbs Insertion Loss (Typical) – Measured in Closed 50Ω System Common Mode 50Ω/50Ω Current Rating Frequency in MHz 0.01 0.05 0.15 0.5 1 3 5 10 30 7A 70 70 72 78 72 62 54 45 25 16A 72 70 68 70 74 65 58 46 24 30A 49 50 60 79 77 64 56 48 34 42A 50 50 61 75 78 65 57 46 32 55A 41 40 26 30 32 50 52 49 22 75A 42 40 28 32 35 51 50 46 21 100A 40 37 42 32 36 48 50 46 20 125A 39 41 50 66 60 50 45 37 17 150A 31 33 44 61 56 47 43 36 21 Differential Mode 50Ω/50Ω Current Rating Frequency in MHz 0.01 0.05 0.15 0.5 1 3 5 10 30 7A 50 52 36 50 50 46 40 26 30 16A 56 50 38 51 52 48 42 28 32 30A 31 34 48 83 80 57 45 23 25 42A 32 32 50 80 75 72 46 26 22 55A 30 35 20 22 34 45 48 26 27 75A 40 38 25 21 34 46 48 30 24 100A 45 40 50 25 32 50 47 32 22 125A 49 50 54 53 45 33 26 19 19 150A 44 45 43 56 47 33 27 22 22 INDUSTRIAL / KEV-BS SERIES 4 KEV-BS Series Three Phase Very High Performance EMI Filter Common Mode Insertion Loss (Typical in dB – Refer to table above) 7A 16A 30A 42A 55A 75A INDUSTRIAL / KEV-BS SERIES 5 KEV-BS Series Three Phase Very High Performance EMI Filter Common Mode Insertion Loss (Typical in dB – Refer to table above) 100A 120A 150A INDUSTRIAL / KEV-BS SERIES 6 KEV-BS Series Three Phase Very High Performance EMI Filter Case Dimensions – Standard Version 7A Shock Proof Type 16A Shock Proof Type 30A to 42A Shock Proof Types 55A Shock Proof Type 75A Shock Proof Type 100A Shock Proof Type INDUSTRIAL / KEV-BS SERIES 7 KEV-BS Series Three Phase Very High Performance EMI Filter Case Dimensions – Standard Version 125A to 150A Types INDUSTRIAL / KEV-BS SERIES 8 KEV-BS Series Three Phase Very High Performance EMI Filter Case Dimensions – Din Rail Mount 7A Shock Proof Type – Horizontal Mount Note: Din Rail not supplied 7A Shock Proof Type – Vertical Mount Note: Din Rail not supplied INDUSTRIAL / KEV-BS SERIES 9 KEV-BS Series Three Phase Very High Performance EMI Filter Case Dimensions – Din Rail Mount 16A Shock Proof Type – Horizontal Mount Note: Din Rail not supplied 16A Shock Proof Type – Vertical Mount Note: Din Rail not supplied INDUSTRIAL / KEV-BS SERIES 10 KEV-BS Series Three Phase Very High Performance EMI Filter Case Dimensions – Din Rail Mount 30A Shock Proof Type – Horizontal Mount Note: Din Rail not supplied 30A Shock Proof Type – Vertical Mount Note: Din Rail not supplied INDUSTRIAL / KEV-BS SERIES 11 KEV-BS Series Three Phase Very High Performance EMI Filter Case Dimensions – Din Rail Mount 42A Shock Proof Type – Horizontal Mount Note: Din Rail not supplied 55A Shock Proof Type – Horizontal Mount Note: Din Rail not supplied INDUSTRIAL / KEV-BS SERIES 12 KEV-BS Series Three Phase Very High Performance EMI Filter Case Dimensions – Din Rail Mount 75A Shock Proof Type – Horizontal Mount Note: Din Rail not supplied 100A Shock Proof Type – Horizontal Mount Note: Din Rail not supplied All dimensions in mm; Tolerances according: ISO2768-m INDUSTRIAL / KEV-BS SERIES 13 HOW TO ORDER Part Number 30 - KEV - D - 10 - A - BS - W - HM Current Rating 30 Standard 7, 16, 30, 42, 55, 75, 100, 120, 150 DM Dual Mount HM Horizontal Mount Din Rail 7, 16, 30, 42, 55, 75, 100 VM Vertical Mount Series Type KEV Mount Type (Din Rail only) Series Type Filter Stage Electrical Network D Star W WYE Filter Type S Single FP Fully Potted D Dual BS Book Shelf Termination Voltage 1 Quick Connect A 440VAC 6 Nut & Bolt B 520VAC 10 Touch Safe te.com ©2022 TE Connectivity. All Rights Reserved. TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. 12/22   ED INDUSTRIAL / KEV-BS SERIES